Busy, Busier, Busiest

I have actually gotten into the Craft Room to play with creating earrings. I love earrings, I believe that's a well established fact by now. So, preferences aside, here are some pics of what's been happening lately. (as you can see, I was having some serious fun ~snork!~) (I believe it's also been established I love Halloween!?)

 

The MUUUUUUSE!

Woo Hoo! My muse came out of hiding for awhile, today, and my 109 lb "fur-baby" let me do some work. I played with Relique Ice Resins today. I made some sample tabs to see what they would do & look like, then I made a pair of earrings. (squeeeeee! I made some jewelry!!)
Anyway, here's some pics. Enjoy!

Top left; Chartreuse, German Silver, Turquoise. Top right; Raspberry, Ivory, Gold. Bottom; Amethyst, Pewter, Ruby.

Used Chartreuse as companion in all but one mix set. Top; C & Raspberry, C. & Turquoise, C. & Amethyst. Right; C. & Pewter, C. & German Silver. Bottom; clockwise from top of pic, Carnelian, C. & Carnelian, C. & Ruby, Carnelian-Turquoise-Ruby.

Earrings; Turquoise, Carnelian, Ruby (hard to see the difference in the red & orange in this pic). Set my colors & ran a toothpick thru them while still in a melted state. I call them "Molten" because I feel compelled to name my stuff. What can I say, I'm weird. :)

Keeping the Muse Satisfied

So, I didn't get to play with my poly-clay this weekend. Too much was going on for me to be abl to do it. HOWsomeEVER!  Last night I was able to play with my wire.  Yes, my fellow Crazy Creators, I have made my first ever fibula!  I am SO proud of me right now, I could bust!!

So! I used the bottom of one of my tool holding buckets to create the initial circular shape, then smoothed the shape slightly with my nylon jawed bracelet forming plyers, then hand tightened the circle. I wire wrapped some faceted, Tanzenite colored crystals to the circle, then created the pin and attached more beads. The pin is (it's been suggested) too long so I have plans to lop off about 1/4" and refile the point. Other than that, I'm happy with it.

Now, why did I choose the beads, etc. that I did? Well, there's a story.  I have a series of jewelry called my "Fishes & Loaves" line that is taken from the story in the Bible where Jesus fed the 5,000 with a little boy's donated lunch of five loaves of bread and two small fish. In the past this has mostly been fish-shaped earrings with five beads (3 on one fish & 2 on the other), a couple of bracelets with the fish motif and five beads wired on, and at least one necklace with the fish & beads (which I loved!). This time, I wanted to finish the story. See, after everyone had been fed, Jesus told His disciples to take up the leftovers. They returned with twelve full baskets. Bet that little boy's momma was shocked! (yes, I believe it went to the boy... after all, it was his lunch given to Jesus to use... why wouldn't Jesus reward his generosity?) ANYway, you'll see there's 5 small, purple round beads and two tiny fish on the straight pin. There's the fish & loaves. If you count, you'll find there are 12 beads on the main portion of the fibula... they represent the 12 baskets of leftovers taken up.  The end of the story (as it were).

I'm sure this will evolve in other ways (already have an idea or two) so keep watching.  After all, my Muse is speaking to me, I must keep her happy!

A Little More Work Last Evening

I was able to sit down for a little while last night, after work, and make a few things. Hope you enjoy:



Fishes & Loaves Asymmetrical Dangles
copper & green seed beads plus the new
way I'm curving in the tails. Seems to work!



Fishes & Loaves Bracelet
Lapis-blue beads (not sure if real or just made to look real)
Copper wire and short bits of necklace chain. I'm going
to play with several designs before I settle on one.



Summer Iris
Again with the earring style learned from
Kristi  Bowman's Aladdin's Lamp earring tute
but using my own little twist. This time I added
a couple beads, top & bottom, as accents and
I used lavender tulle instead of ribbon.

And, for those who want to enter my magazine destash giveaway, go here.

Done!

Okay, so I finished the necklace last night and I learned a few things:
1) Just because someone says "use fixative spray to set" does NOT mean it works for everything (or else I just have a very heavy hand and don't know it)
2) I will, from now on, let "permanent" marker ink cure/set for 24 hours, then rub it with Renaissance Wax to "fix" it in place.

Honestly, I followed directions on the can for the fixative. I even let it dry for 20 minutes instead of the 15 required. Then, I do what I always do to be sure, I rubbed my thumb (rather hard) over the surface and the "permanent" marker that had just been "fixed" by the spray came off on my thumb.

~DRAMATIC SIGH~

Out comes the Renaissance Wax and to (careful) work I go. In a short time, not only is the whole thing coated, but none of the marker ink came off during the process or after a few hard rubs of the thumb. Since it has in the past, I attribute this to letting the ink set overnight (NOT the "fixative").  As a test, I inked up four more hammered washers and left them overnight.  I plan to test them by waxing one (carefully) and seeing if the ink stays put. If so, yay. If not, then it's a combo of the "fixative" and the wax. Fun.

Anyway, here's the finished necklace:

Full view - haven't decided on a title, yet.
Free form carnelian pendent & heat treated red aventurine
squares are from ZNetshows.com.  Marble composite circles
are from Michael's, donut focal is a (former) washer from Lowe's
and the clasp is from the button aisle at Joanne's Craft Store.

 

Closer look at the beads

 

Closer look at the focal....

 

...and at the clasp.

I had no real design in mind when I started this. I just hammered away at the washer to start with. When it was done, and I recalled I need to finish some designs for ZNet Shows, I just felt drawn to the ruddy red-ish, orange-ish color in the carnelian and aventurine. It didn't seem like enough, though, so I dug through my stash until I found the marble composite beads. They're a pink-ish white/cream color with the ruddy red-ish, orange-ish color of the ZNet beads.  It was perfect, and their shape echoed the chain and washer.  I'll be sending a photo of the design to Bill Zhang shortly.  I have more designs to work on, but I don't want him to think I'm not working with the gorgeous beads he's sent me.


Now, moving on slightly, I also tried my hand at turning my Fishes & Loaves earring series into a bracelet. It worked, and it didn't. Here's the (mostly) finished product:

I got the five beads on for the loaves, four wired to the bracelet and one as a dangle by the fish's tail but I was only able to get one fish (the clasp).  I need to find a way to add the second fish or it won't be right.  I'm also a little worried that there are "snag" trap areas so I think it requires a bit more tweaking. I plan to wear it a few times with various outfits to see if it does snag.  Any suggestion will be gratefully received and, likely, tested out.  All in all, not completely disappointed in this for a first attempt. Will be checking the tutes I've pinned and bookmarked for bracelet making to see what I can tweak.

And now, off to email Bill.

Lanyards and Upcoming Photos

I'm really getting into designing lanyards recently.  My pal, Witchi-poo, is selling them at her office and I'm making a "plan of attack" to go after business at our local Kaiser offices, too.  I mean, what woman wouldn't prefer to wear a lanyard that looks more like jewelry than most on the market?  If you wear the ones normally sold, they're just industrial nylon and they tangle with your necklace if you try to wear one.  Let's start wearing lanyards that ARE necklaces!  And, buying more than one means you have style choices for the whole week! Not a bad idea, eh!? 

Anyway, at Witchi-poo's office, they've been going so fast, they're more commission than pre-made right now. I've got two on order (I need to buy some beads in the right color) and I just finished one last night (that's the only pic I have right now... sorry it's not better quality, but iPhones only do so much, y'know?).  I'm hoping to get ahead of the curve so I can make a larger number for selling, both in person and on Etsy.



Black, hot pink and purple by request.  I used a
hammered and inked disc I bought from Melinda Orr
to cover the tag holder so it would look more
like a necklace. Thanks, Melinda!

 Man, the ideas are a-poppin' right now!

Have a great one!


Aqua and yellow on silver chain.
It's hanging out at Witchi-poo's office,
waiting for it's Forever Home.
If you want it, it's just $20...
email me and we'll work it out!