Power Supply Adapter

This simpl e circuit will protect the costly equipment from high as well as low voltages and the voltage surges (when power resumes). It also gives a melodious tune when mains power resumes. When mains voltage is normal, the DC voltage at the cathode of zener diode D4 is less then 5.6V. As a result transistor T1 is in ‘off’ state. The DC voltage at the cathode of zener diode D5 is greater than 5.6V and as a result transistor T2 is in ‘on’ state. Consequently, relay RL1 gets energised, which is indicated by lighting up of green LED . Under high mains voltage condition, transistor T1 switches to ‘on’ state because the voltage at cathode of zener diode D4 becomes greater than 5.6V. Consequently, transistor T2 switches to ‘off’ state, making the relay to de-energise Under low mains voltage condition, transistor T1 switches to ‘off’ state and as a result transistor T2 also switches to ‘off’ state, making the relay to de-energise. Read more explanation here

This circuit is not really simple, but will save your money :). This over/under voltage cut-out will save your costly electrical and electronic appliances from the adverse effects of very high and very low mains voltages. The circuit features auto reset and utilises easily available components . It makes use of the comparators available inside 555 timer ICs. Supply is tapped from different points of the power supply circuit for relay and control circuit operation to achieve reliability. The circuit utilises comparator 2 for control while comparator 1 output (connected to reset pin R) is kept low by shorting pins 5 and 6 of 555 IC. The positive input pin of comparator 2 is at 1/3rd of Vcc voltage. Read more explanation here