plugins
104 TopicsImprovement: Handling Component Installs for Vulnerability Assessment
Background On Friday, February 6, 2026, Tenable Research published a plugin update that changed the way component installs are assessed for vulnerabilities. Those changes are outlined in a previous release highlight: Component Installs Require Paranoid Checks, This update essentially reverts this change, while adding new functionality to allow users to choose whether or not they want component installs assessed for vulnerabilities. Component installs are no longer influenced by scan paranoia settings. What are “Component Installs”? Software components, such as applications or language modules/libraries, are installed and managed by a primary "parent" package or application. The crucial point is that these components often cannot be updated individually. Instead, their vulnerability assessment and upgrade are entirely dependent on an update of the parent package. For instance, the SQLite database component is installed as part of the Trend Micro Deep Security Agent and is updated only when the Agent itself is updated. Nessus uses several factors to determine if a detected product is a component, or a standalone installation, including: Was the product installed by a package manager? These products are not considered components, as they are managed by the package manager and not a “parent” application Is the component a “language library”, i.e. a library or module used by the interpreter of a programming language like Python or Node.js? These enumerated libraries are marked as components by default. Does the product reside in a directory that is recognized for installations that are not component-based? Changes By default, component installs are once again assessed for vulnerabilities, as was the case prior to the release of the aforementioned update. If users wish to turn this setting off, so that component installs will not be assessed by generic vulnerability detection plugins, they can do so via the newly created scan preference. The end result of this change should be that fewer “false positives”, i.e. reported vulnerabilities for components that are “owned” by another application, are shown in scan results. Components with vulnerabilities that cannot be addressed independently of the “parent” application will not show in scan results. However, some customers have expressed a desire to see these vulnerabilities in their scan results anyway, to ensure full awareness of the risk profile of every application in their environment. This is still possible through the updated scan configuration settings. To modify this setting in your scan policy, go to Settings > Assessment > Accuracy > Override Normal Accuracy > Assess component installs for potential vulnerabilities. This setting is ON (checkbox is ticked) by default, so users must enable the Override Normal Accuracy checkbox (which is OFF / unchecked by default) if they wish to disable the setting and ensure that component installs are not assessed by generic vulnerability detection plugins in this scan. Please note that this update makes no other changes to the existing paranoia logic, outside of what is described above. For now, “Managed”, “Managed by OS” and “Backported” installs are still controlled by the Show/Avoid potential false alarms radio button. How can I tell if the detected install is a component or not? In addition to the above, we have also updated the relevant detection plugins so they will show if the component flag is set or not. At present, this includes detection plugins for OpenSSL, Curl, LibCurl, Apache HTTPD, Apache Tomcat, SQLite, Python Packages, Node.js modules and, soon to follow, Ruby and Nuget libraries. Using plugin ID 174788, SQLite Detection (Windows), here is a before and after example of the expected plugin output. Before: After: Expected Impact With the new default setting in place, users should anticipate an increase in vulnerability findings for the products in scope, returning to a level similar to what was observed before the first update. If users do not wish to surface these additional potential vulnerabilities, they should disable the "Assess component installs for potential vulnerabilities” setting. If the new scan preference is disabled, the volume of findings will remain consistent with current levels, when scanning with normal accuracy (paranoia) settings. Affected Plugins 12288, global_settings.nasl (updated to support the new scan policy preference) Any plugin that operates downstream of those in the list below: SQLite: 174788 - sqlite_nix_installed.nasl 171077 - sqlite_win_installed.nasl OpenSSL: 168007 - openssl_nix_installed.nasl 168149 - openssl_win_installed.nasl Curl: 182774 - curl_nix_installed.nasl 171860 - curl_win_installed.nasl LibCurl: 182848 - libcurl_nix_installed.nasl Apache HTTPD: 141394 - apache_http_server_nix_installed.nasl 141262 - apache_httpd_win_installed.nasl Apache Tomcat: 130175 - apache_tomcat_nix_installed.nasl 130590 - tomcat_win_installed.nasl Python Packages: 164122 - python_packages_installed_nix.nasl 139241 - python_win_installed.nasl Node.js Modules: 178772 - nodejs_modules_linux_installed.nasl 179440 - nodejs_modules_mac_installed.nasl 200172 - nodejs_modules_win_installed.nasl Targeted Release Date Tenable Nessus and Vulnerability Management: Monday, March 9, 2026 (ETA 22:30 Eastern Standard Time) Tenable Security Center: Monday, March 16, 20263.3KViews4likes14CommentsTenable Research Release Highlight: Large Differential Feed Update Notification
Summary Updates to a few initial detections required touching shared library files that will result in a large plugin differential feed when these updates are released. This type of large update has resulted in some customers experiencing network congestion when Tenable Nessus Agents pull these plugin updates. Customer Impact Customers that have previously experienced network congestion during large plugin updates may have this recurring issue and should plan accordingly. Target Release Date NOV 16, 2026Research Release Highlight: Reduced Informational Findings from Service Detection
Summary Tenable is updating the Service Detection plugin (Plugin ID 22964) to stop reporting an informational finding on ports that accept a connection but close it without sending any data. These are typically triggered by scanning network infrastructure devices which will give the appearance of having thousands of ports open even though they are not actively listening. With this change, we will still have the available data for downstream plugins to do fingerprinting where there is an active service but we will reduce noise in reporting on ports that do not have an active listening service. Customer Impact Most customers do not need to take any action. You may notice fewer informational findings from Plugin 22964 in your scan results. Plugin 22964 will continue to report on services that it positively identifies. Existing findings of this type are no longer reported, so they will be marked as fixed after your next scan, which may cause a one-time change in your informational finding counts. Customers who have built filters, queries or integrations that specifically reference Plugin 22964 and its "service closed the connection without sending any data" message should review them. These items will no longer return results for these ports. Target Release Date November 9, 2026Improvement To Plugin 142960 “HSTS Missing From HTTPS Server (RFC 6797)”
Summary Plugin 142960 now validates the identity of an HTTPS service in line with the current RFC 9525 as opposed to the obsolete RFC 6125. When a service's TLS certificate contains Subject Alternative Name (SAN) entries, the plugin compares the target hostname against those SANs only and no longer considers the certificate's Common Name (CN). If the certificate has no SANs, the plugin falls back to using the CN, so coverage for legacy certificates is unchanged. Background Plugin 142960 checks whether a detected web server supports HTTP Strict Transport Security (HSTS). Before it evaluates the service, the plugin must confirm that the service's TLS certificate covers the identity of the host. This confirms that the server is authorized to answer for that host, and that the finding describes the target host and not whichever service happened to respond on its behalf. If the identity check fails, the plugin cannot evaluate the service. Until now, the plugin performed this check by comparing the resolvable hostname against the CN of the certificate presented on the relevant port. If the CN covered the hostname, the service was evaluated for HSTS. RFC 9525, which supersedes the identity-matching guidance in RFC 6125 (which allowed for the checking of CNs) states that when a certificate carries one or more SAN entries, hostname identity must be validated against those SANs only. The CN must not be used for this purpose, even if it matches the hostname. The RFC gives several reasons: the CN is ambiguous, it cannot hold multiple identifiers, and its use leads to security and parsing inconsistencies. This change was prompted by a case in which a host's service could only be identified through the SAN of its certificate and not through the CN. Research into that case led to RFC 9525, and the update follows its guidance. Changes Service identity validation in plugin 142960 now works as follows: If SANs were enumerated from the service's TLS certificate, the hostname is compared against the SANs only. The CN is not used, even when it matches the hostname. If no SANs were enumerated from the certificate, the plugin uses the CN to validate the service identity, as it did before. Impact For services whose certificates include SANs, the outcome of the identity check depends only on the SAN values. A service whose SANs cover the hostname but whose CN does not will now be validated and evaluated for HSTS. A service whose CN matches the hostname but whose SANs do not will no longer pass validation, so the plugin will not evaluate it. Services with certificates that have no SANs are evaluated as before. Affected Plugins 142960 - HSTS Missing From HTTPS Server (RFC 6797) Targeted Release Date Monday, October 12, 2026Plugin Support - TuxCare Extended Support
Summary Tenable is introducing vulnerability detection plugins for Linux distributions covered by TuxCare's extended lifecycle support programs. Customers using TuxCare's Enterprise Support will now receive accurate vulnerability findings that account for patches delivered by these third-party vendors. Change Before this update, Tenable had no dedicated vulnerability detection for TuxCare's third-party support advisories. Hosts running distributions covered by this extended support program were not recognized as having access to third-party patches, which could result in inaccurate or missing findings for vulnerabilities that TuxCare had already addressed. After this update, Tenable will publish plugins sourced directly from TuxCare advisory feeds. These plugins detect vulnerabilities for which third-party patches are available from TuxCare. Additionally, existing unpatched vulnerability plugins will be updated to check for third-party patch availability, preventing false positive unpatched findings on hosts with an active TuxCare subscription. Note: Findings resolved by these plugins require an active paid subscription to TuxCare's extended lifecycle support service. Impact Customers running TuxCare-supported distributions will receive dedicated vulnerability coverage for those environments. Customers who have already applied available third-party patches may see previously reported unpatched findings correctly resolved. Customers who have not yet applied available patches will see new findings corresponding to vulnerabilities addressed in TuxCare advisories. Target Release Date September 28, 2026Plugin Support - CIQ Extended Support
Summary Tenable is introducing vulnerability detection plugins for Linux distributions covered by CIQ's extended lifecycle support programs. Customers using CIQ's extended support, CIQ Bridge for CentOS 7, Rocky Linux Long-Term Support, and RLC Pro, will now receive accurate vulnerability findings that account for patches delivered by these third-party vendors. Change Before this update, Tenable had no dedicated vulnerability detection for third-party support advisories published by CIQ. Hosts running distributions covered by this extended support program were not recognized as having access to third-party patches, which could result in inaccurate or missing findings for vulnerabilities that CIQ had already addressed. After this update, Tenable will publish plugins sourced directly from CIQ advisory feeds. These plugins detect vulnerabilities for which third-party patches are available from CIQ. Additionally, existing unpatched vulnerability plugins will be updated to check for third-party patch availability, preventing false positive unpatched findings on hosts with an active CIQ subscription. Note: Findings resolved by these plugins require an active paid subscription to CIQ extended lifecycle support service. Impact Customers running CIQ-supported distributions will receive dedicated vulnerability coverage for those environments. Customers who have already applied available third-party patches may see previously reported unpatched findings correctly resolved. Customers who have not yet applied available patches will see new findings corresponding to vulnerabilities addressed in CIQ advisories. Target Release Date September 28, 2026Component Installs Require Paranoid Checks (DEPRECATED)
Update - March 4, 2026 After considering customer feedback, we. have decided to re-evaluate these changes and come up with a better way of handling Component installs. For the latest information, please refer to the new release highlight: Improvement: Handling Component Installs for Vulnerability Assessment Summary With this update, products that are deemed to be components of another application, will now require the scan to be run in paranoid mode to trigger generic vulnerability detection plugins. In this context, “generic vulnerability detection plugins” refers to plugins that cover advisories published by the component vendor (e.g., plugin ID 242325, SQLite < 3.50.2 Memory Corruption) rather than the operating system or “parent” application that distributes the component, either as a part of the operating system or a dependent tool of the parent application. Overview Tenable covers software that can be either installed as base level software, or be included as component software of a larger product installation. Base level software can be updated without any impact to the base product functionality. Component software is typically updated as part of the vendor update for the larger packaged product, and the individual components are not updatable. Non-paranoid scans will report base software vulnerabilities that are actionable. Paranoid scans will report on base software vulnerabilities as well component software vulnerabilities that are not actionable, but still package a potentially vulnerable version of the component. To enhance the accuracy of our vulnerability detection and provide users with greater control over scan results, we are implementing an update affecting how we flag vulnerabilities in software components. Our detection plugins for OpenSSL, Curl, LibCurl, Apache HTTPD, Apache Tomcat, SQLite, PHP, Python packages and Node.js modules can now identify when these packages are installed as components of another parent application (e.g., SQLite bundled with Trend Micro’s Deep Security Agent), rather than as standalone installs. Key Changes: Non-Paranoid Scans: Scans running in the default mode will no longer flag generic vulnerability detection plugins for these component installs. This is because vulnerabilities in components generally cannot be patched directly; users must wait for the parent application's vendor to issue an update. OS Vendor Advisories Unaffected: This change does not affect plugins for OS vendor security advisories that cover the same vulnerabilities (e.g., plugin ID 243452, RHEL 9 : sqlite (RHSA-2025:12522)). Paranoid Scans: For scans running in paranoid mode, generic vulnerability detection plugins will still trigger for component installs if the detected version is lower than the expected fixed version. Expected Impact: Customers running non-paranoid scans should anticipate seeing a reduction in potential vulnerability findings for OpenSSL, Curl, LibCurl, Apache HTTPD, Apache Tomcat, SQLite, PHP, Python packages and Node.js modules that are installed as components. Technical Details: The changes are entirely contained within two shared libraries, vcf.inc and vdf.inc, utilized by the affected plugins. This update impacts approximately 750 plugins specific to OpenSSL, Curl, LibCurl, Apache HTTPD, Apache Tomcat, and SQLite. Targeted Release Date: Friday, February 6, 20263.3KViews0likes16CommentsNew Windows DACL Compliance Check Types Now Available
Summary Tenable is pleased to announce the release of three new atomic compliance check types for Windows auditing: FILE_DACL, REGISTRY_DACL, and SERVICE_DACL. These check types give audit authors a cleaner, more expressive way to assess discretionary access control list (DACL) permissions on files, registry keys, and services. Change These check types improve upon FILE_ACL, REGISTRY_ACL, and SERVICE_ACL check types. The rename to DACL reflects the correct Windows security terminology and aligns with how permission auditing is actually described in benchmarks and hardening guidance. The Audits & Compliance team will be using these check types for all published audits going forward and will be updating existing content to use them. Impact Easier check writing - Each permission check is a single, self-contained atomic check. There is no need to pair a check with a companion ACL structure. The access control criteria are expressed directly in the check itself, reducing the surface area for authoring errors. Easier tailoring - Because all relevant information lives within the atomic check block, policy customization is straightforward. Reviewers, implementers, and content consumers can read exactly what a check requires without cross-referencing a separate structure in the .audit file. Documentation - Usage and examples are available in the Nessus Compliance Checks Reference: FILE_DACL https://docs.tenable.com/nessus/compliance-checks-reference/Content/FILE_DACL.htm REGISTRY_DACL https://docs.tenable.com/nessus/compliance-checks-reference/Content/REGISTRY_DACL.htm SERVICE_DACL https://docs.tenable.com/nessus/compliance-checks-reference/Content/SERVICE_DACL.htm Target Release Date August 27, 2026Research Release Highlight: HTTP/3 Detection Support in NASL Plugins
Summary This update introduces a significant infrastructure enhancement for NASL plugins, enabling support for the HTTP/3 protocol. While the underlying framework now supports HTTP/3, there are currently no plugins that leverage the HTTP/3 protocol. Individual plugins will be updated by Tenable as appropriate to utilize this capability over time. Change The core of this update will allow NASL plugins to dynamically negotiate and utilize either HTTP/1 or HTTP/3 for requests. We are releasing http3_detect.nasl (Plugin ID: Pending) as the initial plugin to leverage this new framework, providing the foundation for future protocol-aware detections over UDP. To utilize HTTP/3, customers must explicitly enable 'UDP port scanning', 'Search for SSL/TLS/DTLS services' and set an appropriate port range in ‘Search for DTLS on’ within their scan policy settings. Care should be taken as UDP port scanning can significantly slow down scans. Customer Impact Existing plugins remain unaffected and will continue to operate over HTTP/1 unless specifically updated by the Tenable Research team. The introduction of http3_detect.nasl serves as the first step in broader protocol support without impacting current scan performance for non-UDP focused scans. Target Release Date August 10, 2026Research Release Highlight – "Fully Scan Operational Technology" Default Setting Change
Summary The "Fully Scan Operational Technology" (OT) preference controls whether Nessus actively scans OT/ICS devices during a scan. This setting is intended to be disabled by default to avoid unintended disruption to sensitive operational technology environments. A long-standing setting in the Do not scan operational technology devices plugin caused this preference to default to enabled in a Basic Network Scan when the discovery type is not set to Custom. Change The default value for "Fully Scan Operational Technology" preference has been corrected from yes to no. Impact This fix will affect existing Basic Network scans automatically upon the next feed update — no scan recreation is required. Customers using Basic Network Scan policies with a non-custom discovery scan type will see the following behavioral change: Before change: "Fully Scan Operational Technology" was silently enabled, meaning OT devices may have been actively scanned. After change: "Fully Scan Operational Technology" will correctly default to disabled. Customers who intentionally want to scan OT devices should explicitly enable the "Fully Scan Operational Technology" preference by switching their scan policy's discovery type to Custom, which will expose the preference in the UI and allow it to be toggled on. Affected products: Tenable Security Center (SC), Tenable Vulnerability Management (TVM), and Nessus Target Release Date July 13, 2026