On Site Setup
- 4 Articles
- Updated on Jan 28, 2026
- Published on Sep 6, 2024
To ensure the quality of the scanned data, prepare the site so that you do not encounter any obstacles and are able to walk freely throughout the area being scanned. Open all doors and, if possible, keep them open during scanning. Use wooden wedg...
- Updated on Nov 25, 2025
- Published on Sep 6, 2024
Ensure that the NavVis MLX has been setup correctly, refer to the documentation in the Shipping Case or here . Make sure the device is placed on a level surface such as the ground or a table. Open the Back Cover and press the On/Off Button to...
- Updated on Jan 22, 2026
How to calibrate the accelerometer of the device and how it is different from the full device calibration implemented at NavVis HQ.
- Published on Apr 21, 2026
Before the visit: Pre-clear access: Confirm site access, inductions, and escorts in advance. Arrange for keys / access cards and ensure doors are unlocked or can be propped open where allowed. Plan scan segments and loop closures:...