Open Source Python Test and Measurement Software for Linux

GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's GMC-300/500/600 , RadMon, RadPro, Gamma-Scout, audio-click and other low-cost Geiger counters, IoT devices, I2C based sensors, GQ EMF devices. GeigerLog reads data from devices, saves them to databases, prints to screen and plots as auto-updated, customizable graphs. Quality control using Statistics, Scatter, Poisson, FFT & Autocorrelation, and more. Gamma Spectra - can be displayed, calibrated, and evaluated in GeigerLog! The Raspberry Pi 4, 5 qualify as GeigerLog hosts.

The Red Pitaya is a commercial, affordable FPGA board with fast analog inputs and outputs. This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya. PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000).

LaueTools is an open-source project for white beam Laue x-ray microdiffraction data analysis including tools in image processing, peaks searching & indexing, crystal structure solving (orientation & strain) and data & grain mapping visualisation. Python 3 Code and new features are now at: https://gitlab.esrf.fr/micha/lauetools

xrayutilities is a python package used to analyze x-ray diffraction data. It can support with performing diffraction experiments and used for common steps in the data analysis. It can read experimental data from several data formats (spec, edf, xrdml, ...); convert them to reciprocal space for arbitrary goniometer geometries and different detector systems (point, linear as well as area detectors); for further processing the data can be gridded (transformed to a regular grid). More detailed description as well as documentation can be found at webpage http://xrayutilities.sourceforge.io/. Downloads for windows can be found on http://pypi.python.org/pypi/xrayutilities Development is performed on github: https://github.com/dkriegner/xrayutilities

This toolkit allows complete control of a microscopy setup from Labview, Matlab, Scilab, Python, .Net, VB, IgorPro, Mathematica and more. Included is a standalone program for image acquisition and scripting control of a scientific microscope.

A cooperative passive radar aimed to be used over commercial (and cheap) hardware.

HOPSA, high oxygen pressure sputter automation, is a Python 3 project to control a step wise sample creation Process. Although written for this specific task it is easy to adopt for any experimental task which changes hardware parameters and waits for a specific condition before proceeding. The graphical interface (QT4) includes plotting (matplotlib), instrument configuration/monitoring and a program step creator. The communication with the hardware is independent of the GUI and any number of devices can be selected. To modify the code for any other task only the hardware interface needs to be redefined.

A python package that allows scientists to easily create configurable and reusable experiments. Intended for use with the LabRAD framework. Developed by the Haeffner group studying quantum simulation at UC Berkeley. Wiki at lrexp.wikispaces.com

OpenSQUID is a Python framework for the control of SQUID (superconducting quantum interference device) readout electronics. It currently supports the Star Cryoelectronics PCI-1000 electronics with PFL-100 and PFL-102 flux-locked loops. Simultaneous operation of both PFL-100s and PFL-102s from a single PCI-1000 is supported. More features are under development. The software is implemented in Python and aims to be easily integrated with user-defined measurement and control code.

Como técnico en informática en un Instituto de Física con el tiempo surgió la necesidad de tener que crear distintas piezas de software para ir resolviendo situaciones diarias. En este proyecto iré agregando pequeños programas en Python 2.7 que voy escribiendo para dar soluciones a algunos de los problemas que surgen día a día en el laboratorio, como ser comunicación con algunos dispositivos o rutinas para ordenar o modificar datos de forma recursiva algunos cálculos matemáticos, creación de gráficas etc. La finalidad principal del proyecto es poder poner a disposición de aquel que lo necesite mi trabajo tanto dentro del Instituto donde trabajo como fuera del mismo. Asi como tambien recibir la mayor cantidad de criticas, consejos e ideas posibles para poder mejorar mi trabajo. Podrán ver que parte de los programas están mas documentados que otros tratare de ir poniéndome al día comentando el código y escribiendo la documentación de los distintos scripts.

This program can make histograms, table and graphics of datas, study the error propagation during a measure, it is usefull if you have to do study errors propagations. The output are latex files, so it is easy for you just put them into your relations.

Copenhagen Computed Tomography Toolbox is a collection of applications and libraries for flexible and efficient CT reconstruction. The toolbox apps generally take a set of projections (X-ray intensity measurements) and filter and back project them in order to recreate the image or volume that the projections represent. The project includes both mostly informative CPU implementations and highly efficient GPU implementations. Regular releases are hosted at the Python Package Index.

dmaControl is a DMA (differential mobility analyzer) control software for aerosol measurements.