交换路由命令汇总

__Dong

已于 2022-04-13 22:16:34 修改

阅读量2.2k

点赞数

CC 4.0 BY-SA版权

分类专栏：网络文章标签： ssh 服务器 linux

于 2022-03-13 22:01:11 首次发布

本文链接：https://blog.csdn.net/IO_print/article/details/123467258

网络专栏收录该内容

15 篇文章

订阅专栏

ssh

在这里插入图片描述

R3关键配置(接口配置省略)
rsa local-key-pair create 

user-interface vty 0 4
 authentication-mode aaa
 protocol inbound ssh

aaa 
 local-user admin password cipher admin
 local-user admin privilege level 15
 local-user admin service-type ssh
 
ssh user admin authentication-type password    //设置用户认证模式问密码

stelnet server enable 

查看用户认证方式 dis  ssh user-information
查看服务状态  dis ssh server status 
查看用户登录session  dis ssh server session

R4模拟登陆
   ssh client first-time enable
   stelnet 10.0.0.1

ftp server

ftp server enable 

aaa
local-user admin password cipher admin
local-user admin service-type ftp 
local-user admin privilege level 15
local-user admin ftp-directory flash:

NAT
静态NAT
在这里插入图片描述

出接口下配置
int g/0/0/1
ip addr 12.0.0.1 24
nat static enable   开启NAT静态功能
nat static global 12.0.0.3 inside 10.0.0.2 netmask 255.255.255.255

dis  nat static验证

动态NAT

nat address-group 1 12.0.0.3 12.0.0.5
acl 2000
rule permit source 10.0.0.0 0.0.0.255

int g0/0/1
nat outbound 2000 address-group 1 no-pat  动态NAT 地址池
nat outbound 2000 address-group 1    # NAPT
nat outbound 2000   # Easy  ip

Nat server

int g0/0/1
nat server protocol tcp global 12.0.0.1 8080 inside 10.0.0.2 80

dis nat server  验证NATserver

(后续持续更新)