H3C综合实验

实验拓扑

实验要求

1、按照图示配置IP地址

2、sw1和sw2之间的直连链路配置链路聚合

3、 公司内部业务网段为VLAN10和VLAN20; VLAN 10是市场部，vlan20是技术部，要求对VLAN进行命名以便识别；PC1属于vlan10，PC2属于vlan20，vlan30用于SW1和SW2建立OSPF邻居；VLAN111为SW1和R1的互联vlan，vlan222为sw2和R2的互联vlan

4、所有交换机相连的端口配置为TRUNK，允许相关流量通过

5、交换机连接PC的端口配置为边缘端口

6、在SW1上配置DHCP服务，为vlan10和vlan20的PC动态分配IP地址，网关和DNS地址；要求vlan10的网关是192.168.1.252，vlan20的网关是192.168.2.253

7、按图示分区域配置OSPF实现公司内部网络全网互通，ABR的环回口宣告进骨干区域；业务网段不允许出现协议报文

8、R1上配置默认路由指向互联网，并引入到OSPF

9、R1通过双线连接到互联网，配置PPP-MP，并配置双向CHAP验证

10、配置EASY IP，只有业务网段192.168.1.0/24和192.168.2.0/24 的数据流可以通过R1访问互联网

11、R1开启TELNET远程管理，使用用户ABC登录，密码ABC，只允许技术部远程管理R1

实验解法

1、给PC配置IP地址

 为R1配置IP地址

<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]int g0/1
[H3C-GigabitEthernet0/1]ip ad
[H3C-GigabitEthernet0/1]ip address 10.0.0.1 30
[H3C-GigabitEthernet0/1]int g0/0
[H3C-GigabitEthernet0/0]ip ad 10.0.0.5 30
[H3C-GigabitEthernet0/0]int g0/2
[H3C-GigabitEthernet0/2]ip ad 10.0.0.14 30
[H3C-GigabitEthernet0/2]int lo0
[H3C-LoopBack0]ip ad 10.1.1.1 32
[H3C-LoopBack0]int mp-group 1
[H3C-MP-group1]ip address 202.100.1.2 30
[H3C]di ip int  b
*down: administratively down
(s): spoofing  (l): loopback
Interface           Physical Protocol IP address/Mask    VPN instance Description
GE0/0               up       up       10.0.0.5/30        --           --
GE0/1               up       up       10.0.0.1/30        --           --
GE0/2               up       up       10.0.0.14/30       --           --
GE5/0               down     down     --                 --           --
GE5/1               down     down     --                 --           --
GE6/0               down     down     --                 --           --
GE6/1               down     down     --                 --           --
Loop0               up       up(s)    10.1.1.1/32        --           --
MP1                 down     down     202.100.1.2/30     --           --
Ser1/0              up       up       --                 --           --
Ser2/0              up       up       --                 --           --
Ser3/0              down     down     --                 --           --
Ser4/0              down     down     --                 --           --
[H3C]

R2上配置IP地址

<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]
[H3C]sysn
[H3C]sysname  r2
[r2]int g0/0
[r2-GigabitEthernet0/0]ip ad 10.0.0.9 30
[r2-GigabitEthernet0/0]int g0/2
[r2-GigabitEthernet0/2]ip ad 10.0.0.2 30
[r2-GigabitEthernet0/2]int g0/1
[r2-GigabitEthernet0/1]ip ad 10.0.0.18 30
[r2-GigabitEthernet0/1]int lo0
[r2-LoopBack0]ip ad 10.1.1.2 32
[r2-LoopBack0]qu
[r2]di ip in b
*down: administratively down
(s): spoofing  (l): loopback
Interface           Physical Protocol IP address/Mask    VPN instance Description
GE0/0               up       up       10.0.0.9/30        --           --
GE0/1               up       up       10.0.0.18/30       --           --
GE0/2               up       up       10.0.0.2/30        --           --
GE5/0               down     down     --                 --