freertos 建立任务超过几个后系统不能能运行

最新推荐文章于 2025-06-28 19:37:02 发布

aa913402271

最新推荐文章于 2025-06-28 19:37:02 发布

阅读量4.2k

点赞数 2

CC 4.0 BY-SA版权

文章标签：嵌入式

原文链接：http://www.cnblogs.com/polar-lights/p/9460010.html

当在FreeRTOS中创建的任务数量超过一定限制时，可能导致系统无法正常运行。解决方法包括检查硬件堆栈分配，合理调整各任务的堆栈大小，并确保任务优先级配置与系统时钟中断优先级匹配。开启任务堆栈监测有助于优化配置。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

        /* *** NOTE ***********************************************************
        If you find your application is crashing here then likely causes are
        listed below.  In addition see http://www.freertos.org/FAQHelp.html for
        more tips, and ensure configASSERT() is defined!
        http://www.freertos.org/a00110.html#configASSERT

            1) Stack overflow -
               see http://www.freertos.org/Stacks-and-stack-overflow-checking.html
            2) Incorrect interrupt priority assignment, especially on Cortex-M