3D打印服务器Octoprint配置步骤

最新推荐文章于 2025-07-12 12:08:00 发布

baby1663

最新推荐文章于 2025-07-12 12:08:00 发布

阅读量3.4k

点赞数 1

CC 4.0 BY-SA版权

文章标签： python 操作系统

原文链接：http://www.cnblogs.com/JarvisCJ/p/7137291.html

本文档介绍了OctoPrint服务器的安装、依赖、使用和配置方法，适用于不同操作系统。OctoPrint是一个用于远程控制3D打印机的响应式Web界面，主要支持Python 2.7。你可以通过安装OctoPi镜像在Raspberry Pi上快速部署，或手动安装并配置所需依赖。启动服务器默认监听5000端口，可通过参数调整绑定地址和端口。此外，OctoPrint还支持以守护进程方式运行，并提供了详细的配置选项供用户自定义。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

Octoprint服务器可以用其它计算机或移动装置，透过局域网络或云端来控制打印机。

官方文档：http://docs.octoprint.org/en/master/

OctoPrint

OctoPrint provides a responsive web interface for controlling a 3D printer (RepRap, Ultimaker, …). It is Free Software and released under the GNU Affero General Public License V3.
Its website can be found at octoprint.org.

Installation

Installation instructions for installing from source for different operating systems can be found on the wiki.
If you want to run OctoPrint on a Raspberry Pi you might want to take a look at OctoPi which is a custom SD card image that includes OctoPrint plus dependencies.