在H3C交换机中配置链路聚合

最新推荐文章于 2025-06-26 15:56:59 发布

转载最新推荐文章于 2025-06-26 15:56:59 发布 · 2.2k 阅读

5 ·

CC 4.0 BY-SA版权

原文链接：https://my.oschina.net/houor/blog/3084326

本文详细介绍了如何在H3C设备上配置链路聚合。包括在系统视图下创建聚合端口，将多个物理端口加入同一聚合组，并展示了如何查看链路聚合的状态。适合网络管理员和技术人员参考。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

#配置链路聚合
#在系统视图下创建聚合端口
[H3C]interface Bridge-Aggregation 2
#在接口视图下把物理端口加入聚合组
[H3C-Bridge-Aggregation2]interface GigabitEthernet1/0/17
[H3C-GigabitEthernet1/0/17]port link-aggregation group 2



[H3C-GigabitEthernet1/0/17]interface GigabitEthernet1/0/18
[H3C-GigabitEthernet1/0/18]port link-aggregation group 2
[H3C-GigabitEthernet1/0/18]interface GigabitEthernet1/0/19
[H3C-GigabitEthernet1/0/19]port link-aggregation group 2
[H3C-GigabitEthernet1/0/19]interface GigabitEthernet1/0/20
[H3C-GigabitEthernet1/0/20]port link-aggregation group 2
[H3C-GigabitEthernet1/0/20]quit


#查看链路聚合状态
[H3C]display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, BLAGG -- Blade-Aggregation, RAGG -- Route-Aggregation
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 9428-2e15-4f70

AGG        AGG   Partner ID              Selected  Unselected  Individual  Share
Interface  Mode                          Ports     Ports       Ports       Type
--------------------------------------------------------------------------------
BAGG1      S     None                    0         4           0           Shar
BAGG2      S     None                    0         4           0           Shar

转载于:https://my.oschina.net/houor/blog/3084326