正点原子linux开发板无屏幕，使用笔记本屏幕显示

买个正点原子linux板子用，发现屏幕和正点原子stm32的屏幕不通用，另购买一块屏幕还是贵，思考如何通过不购买屏幕也可以体验它到显示。可以通过一根网线来解决

解决思路，linux开发板运行应用程序，使用网线将的数据通过网线传至笔记本电脑的屏幕，在window界面编写程序将图像显示出来。

所需工具：笔记本一台，一根网线，正点原子linux开发板

1.linux程序

1.打开linux的显存，将显存映射到到一个地址，通过此地址可以修改和观察显存数据，通过udp协议将数据传送至电脑端

编译使用虚拟机交叉编译，具体方法参考正点原子手册学习

#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include <string.h>
#include <unistd.h>
#include <netdb.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <sys/types.h>
#include <arpa/inet.h>
#include <linux/fb.h>
#include <sys/ioctl.h>
#include <sys/mman.h>

#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <linux/fb.h>

#define SERVER_PORT 8888 //定义端口号：（0-1024为保留端口号，最好不要用）
#define MAX_BUF_SIZE 1024*3 
long ceshi ;
int ceshi1 = 0;
char buffer[MAX_BUF_SIZE];
char buffer1[MAX_BUF_SIZE];
#define display_width 1024
#define display_high 600
#define send_size  50+4

int sockfd; //socket描述符
struct sockaddr_in  addr; //定义服务器起地址
void set_adress(int adress,unsigned char *temp)//adress 代表显存下标，buffer表传输的数值
{
    temp[0] = adress >>24;
    temp[1] = adress >>16;
    temp[2] = adress >>8;
    temp[3] = adress;
    temp[0] = 55;
  
}

void send_date(int temp,int color) //只发送一个颜色
{ 
  
    int n; 
    int i;
    int repeat = 0;
        

    int len;
    struct sockaddr *appaddr; 
    len = sizeof(struct sockaddr_in);
    //while(1) 
    {     /* 从键盘读入,写到服务端 */ 
        #if 0
        printf("Please input char:\n");
        fgets(buffer1,MAX_BUF_SIZE,stdin); 
        #endif
  
        i = 0;
        //temp = y*display_width+x;
        buffer[i] = (unsigned char)(temp/1000000%100);
     
        i++;
        buffer[i] = (unsigned char)(temp/10000%100);

        i++;
        buffer[i] = (unsigned char)(temp/100%100);

        i++;
        buffer[i] = (unsigned char)(temp%100);

        i++;
        buffer[i] = (unsigned char )((color>>8));
        i++;
        buffer[i] = (unsigned char )((color));
        i++;
        buffer[i] = 0;
        
        appaddr = (struct sockaddr *)&addr;
        sendto(sockfd,buffer,10,0,(struct sockaddr*)appaddr,len); 
        bzero(buffer,MAX_BUF_SIZE); 
        
        
    } 
}
void send_date_1(int temp,int length,unsigned short *p) //发送一串颜色1024×2 个长度，使用2个字节作为行数
{ 
  
    int n; 
    int i;
    int j;
    int k = 0;
    int repeat = 0;
    int color;
        

    int len;
    struct sockaddr *appaddr; 
    len = sizeof(struct sockaddr_in);
    //while(1) 
    {     /* 从键盘读入,写到服务端 */ 
        #if 0
        printf("Please input char:\n");
        fgets(buffer1,MAX_BUF_SIZE,stdin); 
        #endif
  
        
        i = 0;  //地址从0开始
        //temp = ceshi++;
        j = temp;
        buffer[i] = (unsigned char)(temp/1000000%100);
        i++;
        buffer[i] = (unsigned char)(temp/10000%100);
        i++;
        buffer[i] = (unsigned char)(temp/100%100);
        i++;
        buffer[i] = (unsigned char)(temp%100);
        i++;
        buffer[i] = (unsigned char)(length>>8);
        i++;
        buffer[i] = (unsigned char)(length&0xff);
        i++;
        for(k = 0;k < length;k++)
        {
            color = p[j++];
            buffer[i++] = (unsigned char )((color>>8));
            buffer[i++] = (unsigned char )((color));
        }
        //buffer[i++] = 0;//结束符号
  
        appaddr = (struct sockaddr *)&addr;
        sendto(sockfd,buffer,i,0,(struct sockaddr*)appaddr,len); 
        //bzero(buffer,MAX_BUF_SIZE); 
        //sleep(1);
        
        
    } 
}
void draw_point(int x,int y,int color) 
{ 
  
    int n; 
    int i;
    int repeat = 0;
        
    int temp;
    int len;
    struct sockaddr *appaddr; 
    len = sizeof(struct sockaddr_in);
    //while(1) 
    {     /* 从键盘读入,写到服务端 */ 
        #if 0
        printf("Please input char:\n"