ARM GCC linker 脚本介绍

最新推荐文章于 2024-03-08 18:43:35 发布

stevenliyong

最新推荐文章于 2024-03-08 18:43:35 发布

阅读量4.7k

点赞数

CC 4.0 BY-SA版权

文章标签： linker 脚本 gcc output system vector

本文链接：https://blog.csdn.net/stevenliyong/article/details/7041576

本文介绍了如何使用ARM GCC的链接器脚本来定义内存布局和节区分配。重点讲解了OUTPUT_FORMAT选项根据endianness设置输出格式，以及如何将程序代码、只读数据放入ROM，读写数据放入RAM。此外，还涵盖了.isr_vector、.data、.bss等节区的处理，以及栈的配置。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

1. Reference

arm-2011.03/share/doc/arm-arm-none-eabi/pdf/ld.pdf

2. An example

OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")

/* Use OUTPUT_FORMAT with three arguments to use different formats based
on the ‘-EB’ and ‘-EL’ command line options. This permits the linker script to
set the output format based on the desired endianness.*/

MEMORY
{
rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00008000
ram (rwx) : ORIGIN = 0x10000000, LENGTH = 0x00002000
}

/* Program code and read-only data go into the ROM. Read-write data goes into
the RAM. An image of the initialized data is loaded into the ROM and will be
copied during system