Keil 烧写STM32F7xx 出现错误提示

STM32F7的芯片库

该资源需要配合Keil开发软件方可使用，它包含了stm32f7的所有芯片。资源源于官网，需要才能下载，在这里分享给大家。

Keil.STM32F7xx_DFP.2.12.0.zip

我在官网下载的，下载了将近2天。分享出来，帮大家省去不必要的等待，提高大家的开发效率。

Keil.STM32F7xx_DFP.2.12.0.pack,keil 5中开发F7系列最新开发包。

Keil.STM32F7xx_DFP.2.4.0。

Keil.STM32F7xx_DFP.2.10.0.pack STM32F7最新固件库

Version: 2.14.0 (2020-12-18) Keil.STM32F7xx_DFP.2.14.0.pack Download STM32CubeMX integration: Added support for USB PHY configuration (MX_Device_h.ftl and FrameworkCubeMX_gpdsc.ftl). Added debugProbe board description. Description file (pdsc): Added global define USE_HAL_DRIVER to the component ::Device:STM32Cube HAL:Common. Added global define USE_FULL_LL_DRIVER to the component ::Device:STM32Cube LL:Common. CMSIS-Driver: EMAC/I2C/MCI/SAI/SPI/USART: Corrected Data Cache handling. MCI: Replaced empty delay loops with _NOP(). USART: Corrected baud rate configuration. USBD_HS/USBH_HS: OTG_HS ULPI clock disabled in low power if internal PHY is used to enable proper operation of OTG_HS port in FS mode during CPU sleep. VIO: LCD support can be disabled with VIO_LCD_DISABLE define. Board Examples: Updated CubeMX examples: Migrated CubeMX projects to V6.0.1. Updated Platform example: Reduced Idle and Timer thread stack size. Reworked README.md format.

固件包

Version: 2.12.0 (2019-07-17) Keil.STM32F7xx_DFP.2.12.0.pack Download Updated Pack to include subset of STM32Cube_FW_F7 Firmware Package version V1.15.0 using HAL Drivers V1.2.7 Added support for Low Level (LL) drivers. Corrected RTE_Device.h file (I2C3_SDA) Corrected condition for selecting HAL RCC MX_Device_h.ftl: Updated parsing of USART virtual mode Updated generation of macros: Added handling for '(' and ')' symbols Corrected launching STM32CubeMX via "play" button for existing projects overwrites with a new STM32CubeMX project file instead of loading existing. Updated Board Examples: graphics examples use Segger emWin version 5.50.0. examples enable Event Recorder in debug targets Updated LCDConf.c (ready for GUI_USE_ARGD = 1) CMSIS-Driver: CAN: Corrected SetBitrate function to leave Silent and Loopback mode as they were. Corrected SetMode function to clear Silent and Loopback mode when NORMAL mode is activated. Corrected MessageSend function to only access required data for sending. EMAC: Corrected __MEMORY_AT(x) define to be compliant with Arm Compiler 6. Corrected: ETH DMA initialization moved to enable of MAC transmitter or receiver solving netInitialize/netUnnitialize/netInitialize sequence. I2C: Corrected transfers for data sizes greater than 255 (Complete Reload handling). Corrected I2C_SlaveReceive functionality. Corrected code alignment. MCI: Added data cache handling. USART: Added check for valid pointer to USART_PIN prior to use. Corrected POWER_OFF sequence. DMA is DeInitialized after it is aborted. USB Device: Updated USBD_EndpointConfigure function to check that maximum packet size requested fits into configured FIFO (compile time configured). I/O output speed is configurable SPI: Updated SPI_TRANSFER_INFO structure - tx_buf type changed from uint8_t * to const uint8_t *. Added check for valid pointer to SPI_PIN prior to use.