数无形时少直觉-好书推荐

做控制的没有不用PID的！这事好书！这里有各种PID的变形，一级PID参数整定法！好过国内一切PID的书！希望对大家有帮助！

学习PID必啃的两本好书，初学者可以通过这两本书入门，了解如何整定参数！

Danaher Motion's chief engineer George Ellis's work on the engineering design of servo control system.Not only control theory but also digital implementation are presented.Different from most of the conventional control system textbook.Very practical for engineers!

作者多年从事控制系统开发，这本书将控制理论讲述的非常浅显易懂，里面有大量作者从事控制系统开发的实际操作经验，很值得学习。

英文版设计资料，可能会有一定的帮助。 欧洲航天局的总结报告--FPGA设计指南 This document is a compilation of problems encountered and lessons learned from the usage of Field Programmable Gate Array (FPGA) devices in European Space Agency (ESA) and National Aeronautics and Space Administration (NASA) satellite missions. The objective has been to list the most common problems which can be avoided by careful design and it is therefore not an exhaustive compilation of experienced problems. This document can also been seen as a set of guidelines to FPGA design for space flight applications. It provides a development method which outlines a development flow that is commonly considered as sufficient for FPGA design. The document also provides down to earth design methods and hints that should be considered by any FPGA designer. Emphasis has also been placed on development tool related problems, especially focusing on Single Event Upset (SEU) hardships in once-only-programmable FPGA devices. Discussions about re- programmable FPGA device will be covered only briefly since outside the scope of this document and will become the focus of a separate future technical report.

Control System Design Guide 控制经典巨作

控制系统设计指南对实际工控工作很有指导的一本书，推荐下载