未能启动mysql 18119_EN ISO 18119-2018

本文档规定了针对重新投入使用的无缝钢制和铝合金运输气瓶(单个或成束,适用于压縮和液化气体,容量范围0.5-150升)以及无缝管路的定期检查和测试标准。同样适用于大于150升的液化气体管路。对于小于0.5升的气瓶,只要可行,也遵循此规定。文档不涉及乙炔瓶和复合气瓶的定期维护。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

适用范围This document specifies the requirements for periodic inspection and testing to verify the integrity of cylinders and tubes to be re-introduced into service for a further period of time. This document is applicable to seamless steel and seamless aluminium-alloy transportable gas cylinders (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure@ of water capacity from 0@5 l up to 150 l and to seamless steel and seamless aluminium-alloy transportable gas tubes (single or those that comprise a bundle) intended for compressed and liquefied gases under pressure@ of water capacity greater than 150 l. It also applies@ as far as practical@ to cylinders of less than 0@5 l water capacity. This document does not apply to the periodic inspection and maintenance of acetylene cylinders or to the periodic inspection and testing of composite cylinders. NOTE Unless noted by exception@ the use of the word ??cylinder?? in this document refers to both cylinders and tubes.

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值