该设备是一款单芯片解决方案，结合了USB 1.0/1.1/2.0兼容性，支持全速和高速模式，并能为10/100Mbps Fast Ethernet提供PHY。它内置了4个USB接口端点，采用专有的突发传输机制实现高数据传输速率。此外，还兼容IEEE 802.3 10BASE-T和100BASE-TX标准，具备全双工和半双工操作能力。设备内置20KB RX和8KB TX包缓冲区，支持MII接口、挂起模式、远程唤醒以及外部PHY环回诊断功能。在挂起模式下可选PHY断电，且支持256/512字节的串行EEPROM用于存储USB描述符和配置信息。
Single chip USB to 10/100 Fast Ethernet and HomePNA and HomePlug Network Controller.
Integrates on-chip 10/100Mbps Fast Ethernet PHY.
USB specification 1.0 and 1.1 and 2.0 compliant.
Supports USB Full and High Speed modes with Bus power capability.
Supports 4 endpoints on USB interface.
High performance packet transfer rate over USB bus using proprietary burst transfer mechanism (US Patent Approval).
IEEE 802.3 10BASE-T and 100BASE-TX compatible.
Embedded 20KB SRAM for RX packet buffering and 8KB SRAM for TX packet buffering.
Supports both full-duplex and half-duplex operation on Fast Ethernet.
Provide optional MII interfaces for Ethernet PHY and HomePNA/HomePlug PHY interface.
Supports suspend mode and remote wakeup via link-up, magic packet, or external pin.
Optional PHY power down during suspend mode.
Supports 256/512 bytes (93c56/93c66) of serial EEPROM (for storing USB Descriptors).
Supports automatic loading of Ethernet ID, USB Descriptors and Adapter Configuration from EEPROM after power-on initialization.initialization.
External PHY loop-back diagnostic capability.
Integrates on-chip 3.3V to 2.5V voltage regulator and requires only single power supply: 3.3V.
Small form factor with 128-pin LQFP package.
12MHz and 25MHz clock input from either crystal or oscillator source.
扫一扫
1625
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
