matlab 4.9.2-tdm,Matlab R2016a gcc 4.9.2的安装-CSDN博客

本文指导如何将已安装的Mingw-64配置与MATLAB配合使用。首先，提供了Mingw-64的下载链接和密码，强调需选择4.9.2版本且安装路径无空格。接着，详细说明了(A)系统级别和(B)MATLAB启动时临时设置MW_MINGW64_LOC环境变量的方法。最后，通过运行'mex-setup'命令验证MATLAB是否成功识别编译器。另外，还提供了tdm-gcc-4.9.2的下载链接和密码。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

一. Mingw-64 下载地址。

链接：https://pan.baidu.com/s/1FtJbs_yQ1tC95tpq7joYMQ 密码：7gd3

注意： 1)安装版本选择4.9.2；

2) 安装路径不能有空格；

二. I already have MinGW on my computer. How do I configure it to work with MATLAB?

https://ww2.mathworks.cn/matlabcentral/answers/313298-i-already-have-mingw-on-my-computer-how-do-i-configure-it-to-work-with-matlab

MATLAB detects the MinGW compiler by reading the environment variable MW_MINGW64_LOC. When you install MinGW from the MATLAB Add-Ons menu, MATLAB sets this variable. The following instructions can be used to set this environment variable manually.

Verify you have installed MinGW-w64 version 4.9.2 before following these steps.

The MW_MINGW64_LOC environment variable can be (A) set for the entire system level or (B) set temporarily every time you open MATLAB. Administrative privileges are required to set MW_MINGW64_LOC as a system environment variable. No special privileges are required to set the environment variable temporarily.

(A) To set MW_MINGW64 as a system environment variable on Windows 7/8/10:

Make sure you have administrative privileges.

Select Computer from the Start menu.

Choose System properties from the context menu.

Click Advanced system settings > Advanced tab.

Click Environment Variables.

Under System variables, select New.

In the New System Variable dialog box, type MW_MINGW64_LOC in the Variable name field.

In the Variable value field, type the location of the MinGW-w64 compiler installation, for example, 'C:\TDM-GCC-64'.

Click "OK" to close the dialog boxes, then close the Control Panel dialog box.

(B) To set MW_MINGW64 as a temporary environment variable using MATLAB:

Run the following in the MATLAB Command Window:

>> setenv('MW_MINGW64_LOC',folder)

where 'folder' is the installation directory of MinGW. For example, 'C:\TDM-GCC-64'. This command will need to be run every time you start MATLAB for MATLAB to correctly use MinGW. You can consider adding the above command to your 'startup.m' file. This will execute the command every time MATLAB starts up.

To Verify:

After performing the above steps, you can verify if the compiler was recognized by MATLAB by running the following command:

>> mex -setup

三. 其他

https://ww2.mathworks.cn/matlabcentral/answers/311290-faq-how-do-i-install-the-mingw-compiler

四 tdm-gcc-4.9.2下载

链接：https://pan.baidu.com/s/1rD7egsrpf8ydY7LFDk2x-A 密码：zgf0