华为无线AC旁挂POE交换机直接转发配置实验

详细配置视频，解析分享

https://www.bilibili.com/video/BV1wM411P78b/?spm_id_from=333.999.0.0

拓扑

初始配置

CoreSW

sys
sysn CoreSW
vlan 200
int vlan 200
ip add 192.168.200.2 24
int loopback 0
ip add 1.1.1.1 32
int g0/0/1
port link-ty trunk
port trunk allow vlan all
q
ip route-static 192.168.101.0 24 192.168.200.1
ip route-static 192.168.102.0 24 192.168.200.1 //到无线终端的静态路由

POE

sys
sysn POE
vlan batch 100 200 101 102 //一定要配置AP下发的网段vlan地址，因为后续DHCP发出的报文带有的 vlan标识是101,102的
int vlan 100
ip add 192.168.100.100 24
int vlan 200
ip add 192.168.200.1 24
int vlan 101 //配置了vlan101,102 DHCP正常，配置了IP，转发才会正常
ip add 192.168.101.100 24
int vlan 102
ip add 192