OpenHarmony3.2-release编译烧录过程（RK3568开发板）

普通的工程师

已于 2024-09-19 18:00:21 修改

阅读量1.1k

点赞数 6

CC 4.0 BY-SA版权

文章标签： harmonyos

于 2024-07-11 13:15:37 首次发布

本文链接：https://blog.csdn.net/weixin_56744243/article/details/140348524

1、编译过程

1、首先下载好openHarmony3.2-release的源码，下载步骤在获取源码步骤中。

2、解压后，进入源代码的根目录

:~/Documents/root/data/harmony/release_code/2023-04-09/OpenHarmony-v3.2-Release/OpenHarmony$ ls
applications  base   build.py  ccache.log      commonlibrary  device  drivers     interface  napi_generator    out        productdefine  test         tools_previewer
arkcompiler   build  build.sh  ccache.log.old  developtools   docs    foundation  kernel     ohos_config.json  prebuilts  qemu-run       third_party  vendor
:~/Documents/root/data/harmony/release_code/2023-04-09/OpenHarmony-v3.2-Release/OpenHarmony$

3、安装编译工具

sudo apt-get install build-essential gcc g++ make zlib* libffi-dev e2fsprogs pkg-config flex bison perl bc openssl libssl-dev libelf-dev libc6-dev binutils binutils-dev libdwarf-dev u-boot-tools mtd-utils gcc-arm-linux-gnueabi cpio device