没有合适的资源?快使用搜索试试~ 我知道了~
Cyclone Universal使用手册


试读
182页

Cyclone Universal使用手册知识点
Cyclone Universal使用手册概述
Cyclone Universal使用手册是P&E Microcomputer Systems, Inc.出品的烧录器使用手册,旨在指导用户正确使用Cyclone Universal烧录器。该手册详细介绍了烧录器的使用方法、注意事项、法律条款等重要信息。
使用权限和版权信息
P&E Microcomputer Systems, Inc.保留对产品的修改权利,不承担由于修改或使用产品而导致的任何责任。该公司拥有软件和文档的版权,禁止未经授权的使用、复制、修改和分发。用户只能出于备份和保护投资的目的制作存档副本,不得将软件或文档用于分发或其他商业目的。
软件使用条款
用户可以在多台计算机上使用该软件,但不得同时在多台计算机上使用。对于群体编程项目,P&E Microcomputer Systems, Inc.建议每个用户购买一份软件和文档副本,以确保合法使用。同时,该公司提供批量折扣和站点授权协议。
责任限制
P&E Microcomputer Systems, Inc.不承担软件使用中的任何责任,包括但不限于利润损失、储蓄损失或其他间接或后果性损失。用户使用软件即表示接受该协议的所有条款。
重要声明
用户在使用Cyclone Universal烧录器之前,务必阅读和理解该手册中的所有条款和规定,以避免法律纠纷和责任争议。
Cyclone Universal烧录器功能
Cyclone Universal烧录器是一款功能强大且灵活的烧录器,支持多种芯片和开发板。该烧录器具有高速烧录、批量生产、自动检测等功能,满足不同用户的需求。
Cyclone Universal烧录器应用场景
Cyclone Universal烧录器广泛应用于电子产品制造、嵌入式系统开发、自动化控制等领域。该烧录器可以与多种开发板和芯片平台集成,满足不同应用场景的需求。
结论
Cyclone Universal使用手册提供了详细的使用指导和法律信息,旨在帮助用户正确使用Cyclone Universal烧录器。用户务必遵守该手册中的所有条款和规定,以避免法律纠纷和责任争议。

Cyclone LC Programmers
User Manual

Purchase Agreement
P&E Microcomputer Systems, Inc. reserves the right to make changes without further notice to any products herein to improve reliability, function, or
design. P&E Microcomputer Systems, Inc. does not assume any liability arising out of the application or use of any product or circuit described herein.
This software and accompanying documentation are protected by United States Copyright law and also by International Treaty provisions. Any use of this
software in violation of copyright law or the terms of this agreement will be prosecuted.
All the software described in this document is copyrighted by P&E Microcomputer Systems, Inc. Copyright notices have been included in the software.
P&E Microcomputer Systems authorizes you to make archival copies of the software and documentation for the sole purpose of back-up and protecting
your investment from loss. Under no circumstances may you copy this software or documentation for the purpose of distribution to others. Under no
conditions may you remove the copyright notices from this software or documentation.
This software may be used by one person on as many computers as that person uses, provided that the software is never used on two computers at the
same time. P&E expects that group programming projects making use of this software will purchase a copy of the software and documentation for each
user in the group. Contact P&E for volume discounts and site licensing agreements.
P&E Microcomputer Systems does not assume any liability for the use of this software beyond the original purchase price of the software. In no event will
P&E Microcomputer Systems be liable for additional damages, including any lost profits, lost savings or other incidental or consequential damages arising
out of the use or inability to use these programs, even if P&E Microcomputer Systems has been advised of the possibility of such damage.
By using this software, you accept the terms of this agreement.
©2015-2023 P&E Microcomputer Systems, Inc.
ARM and Cortex are registered trademarksof ARM Ltd. or its subsidiaries.
NXP, ColdFire, and Kinetis are registered trademarks of NXP Semiconductors.
Texas Instruments and TI are registered trademarks of Texas Instruments Incorporated.
STMicroelectronics is a registered trademark of STMicroelectronics, Inc.
macOS is a registered trademark of Apple, Inc.
All other product or service names are the property of their respective owners.
P&E Microcomputer Systems, Inc.
98 Galen St.
Watertown, MA 02472
617-923-0053
http://www.pemicro.com
Manual version: 3.0
April 2023

User Manual For Cyclone LC Programmers 3
1 INTRODUCTION
PEmicro's Cyclone LC production programmers are powerful, fast, and feature rich in-circuit
programming solutions. PEmicro offers two models which have the same feature set and only vary
by the devices supported.
Part# CYCLONE-LC-ARM supports a wide variety of ARM Cortex devices.
Part# CYCLONE-LC-UNIV supports those ARM Cortex devices as well as the following NXP
device families: Kinetis, LPC, S32, MPC55xx-57xx), MPC5xx/8xx, DSC, S12Z, RS08, S08, HC08,
HC(S)12(X), ColdFire. It also supports Infineon’s TriCore
TM
(DAP only - AUDO
TM
TC1xx and
AURIX
TM
TC2xx/TC3xx) and STMicroelectronics’ SPC5 & STM8 (with STM8 adapter).
Note: PEmicro refreshed Cyclone names and part numbers in July 2019. The part numbers listed on
earlier Cyclones will differ slightly. CYCLONE is now called Cyclone LC, however the hardware
has not changed.
Cyclone LC programmers are designed to withstand the demands of a production environment.
They are Stand-Alone Programmers (SAP) that can be operated manually or used to host
automated programming. In manual SAP mode the Cyclone is operated using the touchscreen
LCD Menu and/or the Start button. Host-controlled SAP mode, for automated programming, is
accomplished using the Cyclone Control Suite.
1.1 Supported Devices
An up-to-date list of devices supported by PEmicro’s Cyclone programmers, including vendors/
families, is available at PEmicro’s website on the Cyclone product page, under the tab “Choosing a
Cyclone Model”: pemicro.com/cyclone.
For ARM devices specifically: if PEmicro supports an ARM Cortex-M device then it is supported by
all models of Cyclone. A list of ARM device manufacturers where users can locate their specific
supported device part number is available at: https://www.pemicro.com/partners/index.cfm
1.2 PEcloud: Secure Management of Remote Programming
PEcloud is a cloud-based programming job management tool that enables customers to monitor
usage of and exercise additional control over their production programming images - in real-time,
anywhere in the world. PEcloud users create programming jobs and manage them via this easy-
to-use service. Jobs being programmed in remote manufacturing locations can be paused,
deleted, updated, and their programming logs can be inspected. There currently is no cost to use
PEcloud.
Note: Cyclone LC programmers must have an active ProCryption Security license (part# LIC-CYC-
PROCRYPTION) in order to be provisioned successfully for PEcloud, due to its stringent security
requirements.
To learn more about the PEcloud tool, please refer to CHAPTER 10 - PEcloud - SECURE
MANAGEMENT OF REMOTE PROGRAMMING.
1.3 Distinguishing Windows-Only And macOS/Linux-Specific Content
Many control and automation features offered by the Cyclone Control Suite are available for
macOS and Linux platforms, in addition to Windows. See CHAPTER 8 - CYCLONE
PROGRAMMER AUTOMATED CONTROL. However, some elements such as Image Creation
remain Windows-only.
The matrix below indicates at a high level which Cyclone features are available for each platform:
Windows macOS Linux
Cyclone Control GUI x x x
Cyclone Control Console x x x
Cyclone Control SDK x x x
Image Creation Utility x

User Manual For Cyclone LC Programmers 4
Table A-1. Cyclone Feature Support
In this user manual, information that pertains to the Windows platform only, or is particular to
macOS/Linux, is indicated by the symbols below. Content can be considered to apply to all three
platforms unless otherwise specified.
Windows-only:
macOS:
Linux:
1.3.1 Minimum Required Versions
The following are the minimum versions required for macOS/Linux support.
macOS: 10.13 High Sierra
Linux: 18.04 LTS
SAP Image Compiler x
Initiate Programming with
Barcode Scanner
x
Automatic Serial Number
Mechanism
x
Windows macOS Linux

User Manual For Cyclone LC Programmers 5
2 QUICK START GUIDE FOR SAP OPERATION
This guide will allow the user to set up and program a simple Stand-Alone Programming (SAP)
image with the Cyclone by completing the following steps.
• Installing the Cyclone software
• Setting up the Cyclone hardware
• Creating a stand-alone programming image
• Deploying the image to a Cyclone
• Launching Cyclone programming
This guide is intended as a supplement to the Cyclone’s User Manual, which contains in-depth
information about the topics covered here and much more.
Note: There have been significant changes in the image creation and deployment process, including a
revised Cyclone Image Creation Utility, and the addition of a new Build & Deploy Utility to the
previous workflow. Users who are familiar with previous versions of the Image Creation Utility
should be sure to note these changes.
2.1 Installing The Cyclone Software
First, the Cyclone software should be installed on the user’s PC. It can be downloaded from the
Support & Downloads tab on the pemicro.com Cyclone product page, or directly from https://
www.pemicro.com/downloads/download_file.cfm?download_id=481.
For macOS/Linux, download the .TGZ file from the Support & Downloads tab, or directly from https://
www.pemicro.com/downloads/download_file.cfm?download_id=577.
Once the software is downloaded, the user should install it on their PC. If Cyclone software is already
installed on the PC, it is recommended that the old installation be removed before the user installs the
latest software.
2.2 Setting Up The Cyclone Hardware
Step 1. Configure Cyclone power settings
The Cyclone has several different power configurations. The label on the bottom of the Cyclone
indicates the appropriate Jumper settings for each. The user should install the Jumpers as indicated
for their desired power configuration.
The Jumpers are located underneath the Cyclone’s access panel. They are labeled “Power Jumpers.”
and numbered from 1-4. The Cyclone-LC-ARM is shown in the example below; the jumper location will
be similar for all Cyclone models.
剩余181页未读,继续阅读
资源推荐
资源评论
165 浏览量
184 浏览量
109 浏览量
2013-11-13 上传
2017-11-17 上传

139 浏览量
2022-07-14 上传
115 浏览量

192 浏览量

161 浏览量

190 浏览量
2015-07-30 上传
137 浏览量
194 浏览量
2012-05-17 上传
178 浏览量

162 浏览量
2020-09-07 上传

157 浏览量
2021-10-01 上传

139 浏览量
2019-08-21 上传
110 浏览量

108 浏览量

1437 浏览量
资源评论

- qq_409787102024-07-19还行吧,先下载看看

IC_programmer
- 粉丝: 5
上传资源 快速赚钱
我的内容管理 展开
我的资源 快来上传第一个资源
我的收益
登录查看自己的收益我的积分 登录查看自己的积分
我的C币 登录后查看C币余额
我的收藏
我的下载
下载帮助


最新资源
- (源码)基于Python和Neo4j的智能就医系统.zip
- 监控专用网络EPON系统测试方案.doc
- Comsol与Matlab联合仿真及模型参数优化:以燃料电池流道优化为例
- 基于JAVA的餐饮管理系统毕业论文1.doc
- (源码)基于Arduino的生物机械手控制系统.zip
- 基于DSP的电机控制技术研究:无刷直流伺服电机的数学模型与控制策略实现
- COMSOL热-流-固三场耦合模拟煤层气藏注CO2开发及CCUS应用 - COMSOL 教程
- (源码)基于ROS的机器人感知与控制项目.zip
- 基于C#与西门子PLC的工控数据采集系统实战源码及精美UI ScottPlot 全面版
- (源码)基于Arduino UNO和TensorFlowKeras的MNIST手写数字快速分类系统.zip
- 三相PWM整流电路的双闭环控制与Simulink仿真实现及应用 - PWM调制
- (源码)基于Python和LightGBM的视频留存预测系统.zip
- 基于Carsim2020.0与Matlab Simulink2018b的7自由度车辆动力学模型联合仿真验证
- MATLAB Simulink中线性分组码BCH与卷积码的工程实现及误码率分析
- (源码)基于嵌入式C语言的LED矩阵贪吃蛇游戏.zip
- MATLAB频散曲线绘制软件:圆柱、圆环导波问题求解工具 - GUI界面
安全验证
文档复制为VIP权益,开通VIP直接复制
