epson-rx8130ce芯片手册+linux下的驱动程序

//====================================================================== // Driver for the Epson RTC module RX-8130 CE // // Copyright(C) SEIKO EPSON CORPORATION 2014. All rights reserved. // // Derived from RX-8025 driver: // Copyright (C) 2009 Wolfgang Grandegger <[email protected]> // // Copyright (C) 2005 by Digi International Inc. // All rights reserved. // // Modified by fengjh at rising.com.cn // <http://lists.lm-sensors.org/mailman/listinfo/lm-sensors> // 2006.11 // // Code cleanup by Sergei Poselenov, <[email protected]> // Converted to new style by Wolfgang Grandegger <[email protected]> // Alarm and periodic interrupt added by Dmitry Rakhchev <[email protected]> // // // This driver software is distributed as is, without any warranty of any kind, // either express or implied as further specified in the GNU Public License. This // software may be used and distributed according to the terms of the GNU Public // License, version 2 as published by the Free Software Foundation. // See the file COPYING in the main directory of this archive for more details. // // You should have received a copy of the GNU General Public License along with // this program. If not, see <http://www.gnu.org/licenses/>. //====================================================================== #if 1 #define DEBUG #include <linux/device.h> #undef DEBUG #endif #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/bcd.h> #include <linux/i2c.h> #include <linux/list.h> #include <linux/rtc.h> #include <linux/of_gpio.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/interrupt.h> #include <linux/input.h> // RX-8130 Register definitions #define RX8130_REG_SEC 0x10 #define RX8130_REG_MIN 0x11 #define RX8130_REG_HOUR 0x12 #define RX8130_REG_WDAY 0x13 #define RX8130_REG_MDAY 0x14 #define RX8130_REG_MONTH 0x15 #define RX8130_REG_YEAR 0x16 #define RX8130_REG_ALMIN 0x17 #define RX8130_REG_ALHOUR 0x18 #define RX8130_REG_ALWDAY 0x19 #define RX8130_REG_TCOUNT0 0x1A #define RX8130_REG_TCOUNT1 0x1B #define RX8130_REG_EXT 0x1C #define RX8130_REG_FLAG 0x1D #define RX8130_REG_CTRL0 0x1E #define RX8130_REG_CTRL1 0x1F #define RX8130_REG_END 0x23 // Extension Register (1Ch) bit positions #define RX8130_BIT_EXT_TSEL (7 << 0) #define RX8130_BIT_EXT_WADA (1 << 3) #define RX8130_BIT_EXT_TE (1 << 4) #define RX8130_BIT_EXT_USEL (1 << 5) #define RX8130_BIT_EXT_FSEL (3 << 6) // Flag Register (1Dh) bit positions #define RX8130_BIT_FLAG_VLF (1 << 1) #define RX8130_BIT_FLAG_AF (1 << 3) #define RX8130_BIT_FLAG_TF (1 << 4) #define RX8130_BIT_FLAG_UF (1 << 5) // Control 0 Register (1Еh) bit positions #define RX8130_BIT_CTRL_TSTP (1 << 2) #define RX8130_BIT_CTRL_AIE (1 << 3) #define RX8130_BIT_CTRL_TIE (1 << 4) #define RX8130_BIT_CTRL_UIE (1 << 5) #define RX8130_BIT_CTRL_STOP (1 << 6) #define RX8130_BIT_CTRL_TEST (1 << 7) static const struct i2c_device_id rx8130_id[] = { { "rx8130", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, rx8130_id); struct rx8130_data { struct i2c_client *client; struct rtc_device *rtc; struct work_struct work; u8 ctrlreg; unsigned exiting:1; }; typedef struct { u8 number; u8 value; }reg_data; #define SE_RTC_REG_READ _IOWR('p', 0x20, reg_data) #define SE_RTC_REG_WRITE _IOW('p', 0x21, reg_data) //---------------------------------------------------------------------- // rx8130_read_reg() // reads a rx8130 register (see Register defines) // See also rx8130_read_regs() to read multiple registers. // //---------------------------------------------------------------------- static int rx8130_read_reg(struct i2c_client *client, int number, u8 *value) { int ret = i2c_smbus_read_byte_data(client, number) ; //check for error if (ret < 0) { dev_err(&client->dev, "Unable to read register #%d\n", number); return ret; } *value = ret; return 0; } //---------------------------------------------------------------------- // rx8130_read_regs() // reads a specified number of rx8130 registers (see Register defines) // See also rx8130_read_reg() to read single register. // //---------------------------------------------------------------------- static int rx8130_read_regs(struct i2c_client *client, int number, u8 length, u8 *values) { int ret = i2c_smbus_read_i2c_block_data(client, number, length, values); //check for length error if (ret != length) { dev_err(&client->dev, "Unable to read registers #%d..#%d\n", number, number + length - 1); return ret < 0 ? ret : -EIO; } return 0; } //---------------------------------------------------------------------- // rx8130_write_reg() // writes a rx8130 register (see Register defines) // See also rx8130_write_regs() to write multiple registers. // //---------------------------------------------------------------------- static int rx8130_write_reg(struct i2c_client *client, int number, u8 value) { int ret = i2c_smbus_write_byte_data(client, number, value); //check for error if (ret) dev_err(&client->dev, "Unable to write register #%d\n", number); return ret; } //---------------------------------------------------------------------- // rx8130_write_regs() // writes a specified number of rx8130 registers (see Register defines) // See also rx8130_write_reg() to write a single register. // //---------------------------------------------------------------------- static int rx8130_write_regs(struct i2c_client *client, int number, u8 length, u8 *values) { int ret = i2c_smbus_write_i2c_block_data(client, number, length, values); //check for error if (ret) dev_err(&client->dev, "Unable to write registers #%d..#%d\n", number, number + length - 1); return ret; } //---------------------------------------------------------------------- // rx8130_irq() // irq handler // //---------------------------------------------------------------------- static irqreturn_t rx8130_irq(int irq, void *dev_id) { struct i2c_client *client = dev_id; struct rx8130_data *rx8130 = i2c_get_clientdata(client); disable_irq_nosync(irq); schedule_work(&rx8130->work); return IRQ_HANDLED; } //---------------------------------------------------------------------- // rx8130_work() // //---------------------------------------------------------------------- static void rx8130_work(struct work_struct *work) { struct rx8130_data *rx8130 = container_of(work, struct rx8130_data, work); struct i2c_client *client = rx8130->client; struct mutex *lock = &rx8130->rtc->ops_lock; u8 status; mutex_lock(lock); if (rx8130_read_reg(client, RX8130_REG_FLAG, &status)) goto out; // check VLF if ((status & RX8130_BIT_FLAG_VLF)) dev_warn(&client->dev, "Frequency stop was detected, probably due to a supply voltage drop\n"); dev_dbg(&client->dev, "%s: RX8130_REG_FLAG: %xh\n", __func__, status); // periodic "fixed-cycle" timer if (status & RX8130_BIT_FLAG_TF) { status &= ~RX8130_BIT_FLAG_TF; local_irq_disable(); rtc_update_irq(rx8130->rtc, 1, RTC_PF | RTC_IRQF); local_irq_enable(); } // alarm function if (status & RX8130_BIT_FLAG_AF) { status &= ~RX8130_BIT_FLAG_AF; local_irq_disable(); rtc_update_irq(rx8130->rtc, 1, RTC_AF | RTC_IRQF); local_irq_enable(); } // time update function if (status & RX8130_BIT_FLAG_UF) { status &= ~RX8130_BIT_FLAG_UF; local_irq_disable(); rtc_update_irq(rx8130->rtc, 1, RTC_UF | RTC_IRQF); local_irq_enable(); } // acknowledge IRQ rx8130_write_reg(client, RX8130_REG_FLAG, status); //clear flags out: if (!rx8130->exiting) enable_irq(client->irq); mutex_unlock(lock); } //---------------------------------------------------------------------- // rx8130_get_time() // gets the current time from the rx8130 registers // //---------------------------------------------------------------------- static int rx8130_get_time(struct device *dev, struct rtc_time *dt) { struct rx8130_data *rx8130 = dev_get_drvdata(dev); u8 date[7]; int err; er