Probleme avec mises � jour.

**Sylvae** · 15/03/2025, 14h21

Bonjour !

Je suis revenu avec timeshift � une configuration ant�rieure de 4 mois car j'avais des probl�mes comme l'�chelle des fen�tres minuscules, pas de son au d�marrage, la suspension automatique ne fonctionnait pas... J'ai r�ussi � le faire fonctionner assez bien maintenant, mais j'ai 350 mises � jour en attente maintenant. Et si je laisse leur mise a jour automatique, je reviens a ma mauvaise config.

Une id�e sur un moyen de mettre � jour facilement mon ordinateur, mais en m�me temps de filtrer les applications qui posent probl�me?

Code :

S�lectionner tout - Visualiser dans une fen�tre � part

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
System:
  Kernel: 6.1.0-26-amd64 [6.1.112-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-26-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.4_x64 Libretto May 19  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop System: Gigabyte product: N/A v: N/A serial: <superuser required> Chassis: type: 3
    serial: <superuser required>
  Mobo: Gigabyte model: H61M-S2PV serial: <superuser required> UEFI: American Megatrends v: FG WG
    date: 02/19/2013
CPU:
  Info: model: Intel Core i7-2600 bits: 64 type: MT MCP arch: Sandy Bridge gen: core 2 level: v2
    built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2F
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 1703 high: 1784 min/max: 1600/3800 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 1644 2: 1670 3: 1675 4: 1784 5: 1783 6: 1687 7: 1688 8: 1699
    bogomips: 54273
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA GP106 [GeForce GTX 1060 3GB] vendor: Gigabyte driver: nvidia v: 535.183.01
    non-free: 530.xx+ status: current (as of 2023-03) arch: Pascal code: GP10x process: TSMC 16nm
    built: 2016-21 pcie: gen: 2 speed: 5 GT/s lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:1c02
    class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
    unloaded: fbdev,modesetting,nouveau,vesa alternate: nv gpu: nvidia display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
  Monitor-1: DVI-D-0 res: 1920x1080 hz: 50 dpi: 66 size: 735x420mm (28.94x16.54")
    diag: 847mm (33.33") modes: N/A
  Monitor-2: HDMI-0 pos: primary res: 1920x1080 hz: 60 dpi: 102 size: 476x268mm (18.74x10.55")
    diag: 546mm (21.51") modes: N/A
  API: OpenGL v: 4.6.0 NVIDIA 535.183.01 renderer: NVIDIA GeForce GTX 1060 3GB/PCIe/SSE2
    direct-render: Yes
Audio:
  Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: Gigabyte 6
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403
  Device-2: NVIDIA GP106 High Definition Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
    pcie: gen: 2 speed: 5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:10f1 class-ID: 0403
  API: ALSA v: k6.1.0-26-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: JACK v: 1.9.21 status: off tools: jack_control
  Server-2: PipeWire v: 1.0.0 status: off with: 1: pipewire-pulse status: off 2: wireplumber
    status: off tools: pw-cat,pw-cli,wpctl
  Server-3: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Gigabyte driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 03:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 1.36 TiB used: 322.53 GiB (23.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ02ABD100H size: 931.51 GiB block-size:
    physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 5A
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD5000AAKX-75U6AA0 size: 465.76 GiB
    block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1H19
    scheme: GPT
Partition:
  ID-1: / raw-size: 465.51 GiB size: 457.13 GiB (98.20%) used: 322.53 GiB (70.6%) fs: ext4
    dev: /dev/sdb2 maj-min: 8:18
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sdb1 maj-min: 8:17
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 46.0 C mobo: N/A gpu: nvidia temp: 48 C
  Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Repos:
  Packages: 2514 pm: dpkg pkgs: 2502 libs: 1326 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 12
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/librewolf.list
    1: deb [arch=amd64] http://deb.librewolf.net bookworm main
  Active apt repos in: /etc/apt/sources.list.d/lutris.list
    1: deb [signed-by=/etc/apt/keyrings/lutris.gpg] https://download.opensuse.org/repositories/home:/strycore/Debian_12/ ./
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.lip6.fr/pub/linux/distributions/mxlinux/packages/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/protonvpn-stable.list
    1: deb [signed-by=/usr/share/keyrings/protonvpn-stable-archive-keyring.gpg] https://repo.protonvpn.com/debian stable main
  Active apt repos in: /etc/apt/sources.list.d/unityhub.list
    1: deb [signed-by=/usr/share/keyrings/Unity_Technologies_ApS.gpg] https://hub.unity3d.com/linux/repos/deb stable main
  Active apt repos in: /etc/apt/sources.list.d/winehq-bookworm.sources
    1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/debian bookworm main
Info:
  Processes: 291 Uptime: 2h 33m wakeups: 1 Memory: 15.58 GiB used: 5.09 GiB (32.7%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

**A3gisS3c** · 17/03/2025, 10h38

Hello,

Code :

S�lectionner tout - Visualiser dans une fen�tre � part

1
2
3
4
5
6
7
8
9
 
# Empecher ce paquet d'être mis à jour
apt-mark hold <package>
 
# Affichage des paquets bloqués
apt-mark showhold
 
# Re-autoriser un paquet à être mis à jour
apt-mark unhold <package>

A noter que le wildcard * fonctionne.

**Sylvae** · 17/03/2025, 14h19

Merci de ta reponse, mais grace simplement a synaptic, j'ai pu tamiser mes paquets jusqu'a trouver mes coupables:

mx-system-sound, qui desactive la musique d'ouverture de session, et

xfce4-settings/xfce4-helpers qui reduit la taille de ma fenetre.

Probleme maintenant: dois je renoncer a leur futurs mises a jour, et si oui, coment les marquer pour cela, en les retirant de l'updater?

**A3gisS3c** · 17/03/2025, 15h36

Envoy� par Sylvae

dois je renoncer a leur futurs mises a jour, et si oui, coment les marquer pour cela, en les retirant de l'updater?

R�ponse dans le post au-dessus pour les retirer de l'updater ^^

Ou sinon tu les configures pour arriver au r�sultat que tu veux (mais de ce cot� je ne pourrais pas t'aider).

**Sylvae** · 17/03/2025, 16h43

Super

, merci a toi.

Probleme avec mises � jour.

Debian

Discussions similaires

Partager

Partager