SATA stands for Serial Advanced Technology Attachment or Serial ATA. SATA is an interface that connects various storage devices such as hard disks, optical drives, SSD's, etc to the motherboard. SATA was introduced in the year 2000 to replace the long-standing PATA (Parallel ATA) interface. We all know, in serial mode, data is transferred bit by bit and in parallel, there are several streams that carry the data. Despite knowing this fact, there is a drawback in PATA. PATA is highly susceptible to outside interferences and hence allows SATA to operate at high speeds than PATA. SATA cables are thinner, more flexible and compact as compared to the PATA cables.
There were several industry groups that began their development in SATA late in the 2000s. It was only in the year 2003 that SATA-IO (SATA International Organization) was formed and it laid out the first SATA specifications.
A SATA controller is a device that is used to connect the computer’s motherboard to the storage drives.
Modes of SATA
SATA operates on two modes:
- IDE mode: IDE stands for Integrated Drive Electronics. This is a mode which is used to provide backward compatibility with older hardware, which runs on PATA, at the cost of low performance.
- AHCI mode: AHCI is abbreviation for Advanced Host Controller Interface. AHCI is a high-performance mode that also provides support for hot-swapping.
Characteristics of SATA
- Low Voltage Requirement: SATA operates on 500mV (0.5V) peak-to-peak signaling. This help in promoting a much low interference and crosstalk between conductors.
- Simplified construction: PATA cables had 40-pin/80-wire ribbon cable. This was complex in construction. In comparison, SATA had a single 7 pin data cable and a 15 pin power cable. This cable resulted in a higher signaling rate, which translates to faster throughput of data.
- Differential Signaling: SATA uses differential signaling. Differential signaling is a technology which uses two adjacent wires to simultaneously the in-phase and out-of-phase signals. Thus, it is possible to transfer high-speed data with low operating voltage and low power consumption by detecting the phase difference between the two signals at the receiver’s end.
- High data transfer rate: SATA has a high data transfer rate of 150/300/600 MBs/second. This capability of SATA allows for faster program loading, better picture loading and fast document loading.
Advantages of SATA
- Faster data transfer rate as compared to PATA.
- SATA cable can be of length upto 1 meter, whereas PATA cable can only have length of maximum 18 inches.
- SATA cables are smaller in size.
- Since, they are smaller in size, they take up less space inside the computer and increase the internal air flow. Increased air flow can decrease heat build-up and therefore increases the overall life of computer.
- Most modern computer motherboards today have SATA ports more than PATA ports.
- Low power consumption (0.5V).
Disadvantages of SATA
- Special device drivers are required sometimes to recognize and use the drive. However, a SATA hard drive can behave as a PATA drive. This eliminates the need for a specific driver to be installed.
- SATA cable supports only one hard drive to connect at a time, whereas PATA cable allows up to two PATA drives per cable.
- SATA is costlier as compared to PATA.
Why is SATA Faster than PATA?
SATA is faster than PATA is because of the serial data transfer communication’s higher signaling rates and less of the crosstalk between the wires. Because PATA works in the parallel mode, it experiences various outside interfacing which slows down the data transfer. Further, SATA also contains differential signaling technology incorporated such that the data transfer potential and data transfer rate at SATA are outclasses PATA significantly.
What is a SATA Used for?
SATA is used for interfacing storage devices such as Hard Disk Drives, Solid State Drives, CD/DVD/Blu-Ray to the computer motherboard. It has become the most common used medium for these devices in today’s computers due to the reasons such as improved throughput, easy handling of cables and efficient utilization of the system.
Conclusion
SATA has enhanced the ways and means, in which storage devices are connected with the motherboard, through enhanced throughput rates, over conventional connections and better cabling and lower power consumption requirements. It is a crucial part for increasing the computers and their performance; thus making it the most popular medium for today’s storage.
Similar Reads
Pure CSS Stacked Form Pure CSS is a framework of CSS. It is a free and open-source tool collection for creating responsive websites and web applications. Pure CSS is developed by Yahoo and is used for creating faster, beautiful, and responsive websites. It can be used as an alternative to Bootstrap. In this article, we w
2 min read
SAT Full Form - Scholastic Assessment Test The SAT, or Scholastic Assessment Test, is a key standardized exam for college admissions in the United States and Canada. Often referred to as the Scholastic Aptitude Test, it has been administered by the College Board since 1926. The SAT evaluates a student's academic skills in reading, writing, a
11 min read
Condensed Structural Formula A molecular formula indicates the number of atoms of each element that are present in a molecule. A structural formula is a graphical representation of a chemical compound that shows the arrangement of atoms as well as chemical bonding around the atoms. A condensed structural formula may also be cal
8 min read
Satpura Range The Satpura Range is a picturesque chain of seven hills that winds its way from Gujarat's eastern region to Maharashtra, Madhya Pradesh, and Chhattisgarh, completely through the center of the nation's territory. Consider this range to be the green spine of the nation; it runs parallel to the Vindhya
6 min read
Rowlatt Satyagraha The Rowlatt Satyagraha was formed against the Rowlatt Act. Rowlatt's Satyagraha took place in 1919. The Rowlatt Act was one of the most challenging laws passed by the British government to restrict the civil freedoms of Indians at the beginning of the 20th century. Rowlatt SatyagrahaRowlatt Satyagra
6 min read
SIT File Format | .sit Extension The StuffIt file format, denoted by the ".sit" extension, is associated with the StuffIt compression and archiving software. Developed by Aladdin Systems (now part of Smith Micro Software), StuffIt was a popular tool for compressing and archiving files, especially on the Macintosh platform. Table of
4 min read