100%(2)100% found this document useful (2 votes) 2K views2 pagesHeat Exchanger Data Sheet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content,
claim it here.
Available Formats
Download as PDF or read online on Scribd
Technical Specification
Plate Heat Exchanger SIGMA M 35 SAL
Customer : Allam Marine.
‘Our inquiry | item — : 11328 Option 2.16v4000G83
Quote No, | Item + £U0113-13 V01 086512 | Pos.:2
Technical Calculation Gold side Warm side
Section: LTW. ethylene glycol 25% ethylene glycol 50 %
Flow rate T 45,000.0 Th 30,000.01
i 4,168.3 3,557.7 __kgih
Temperature in -> out I 44.0 > 62.6 69.0 > 65.0
Media type quid ‘gaseous Tiguid | gaseous
Density tin 7.026 1.052
‘Specific Heat taka 3.806 3.445
‘Thermal conductivily wink 0.503 0.405
Dynamic viscosity oP 4.012 1.374
Latent heat kg 0.000 0,000
‘Surface tm 73
Value wink 4.2008
‘Excess surface | Fouling % | om'KAN TAT | 0.1620
Plate material | Gasket material |Fbaing ‘AISI 304 | NBR | mechanically fixed
'No. of plates [Plate thickness [_No. [mem 22 0.50/0.50
Pressure 105s [bar {bar 0.400 [ 0.250
No. of passes | Plate arrangement [countercurrent 71x11 SH I 4]1x10SW
Frame design ] Carbon steel - primer and coating according RAL 7001
Rules [ Fluid group [Category ‘97/23/EU TADZ000 | + | Category
Intermediate Plate | intermediate Frame] No. 1 [0
‘Oper. pressure (minjmay) [Test pressure| bar 0006.00 | 7.50
‘Operating temperature [min [max BO °C | 1200 °C
Design temperature [min {max 30°C | 120.0 °C.
‘Maximum fing no. of plates 20
[Cold side ‘Connections Warm side
Pos. | Type | Size | Material Pos. | Type | Size | Material
Th | A_ | studbolts DIN EN 1082-1 PNi6 DN‘00 facing] In| D | stud.boits DIN EN 1082-4 PNT6 DN700 facing
plane/raw NBR. plane/raw NBR.
[Out) F/ stud.botts DIN EN 1082-1 PN16 DN700 facing [Out] C | stud.bolts DIN EN 1092-1 PN76 DN100 facing
plane/raw NBR. plane/raw NBR.
E_ | stud.bolts DIN EN 1082-1 PNT6 DNTO0 facing
plane/raw NBR
F | stud.bolts DIN EN 10821 PNi6 DN700 facing
plane/raw NBR
‘Accessories No. | Description
‘Sketch (subject to technical changes upon placing the err!)
anit iow aioe
rok pe Dimensions (mm)
tength oO: 870.00
i width @ : 500.00
height oO) 1,370.00
measure (a): "272.00
' measure (0): 246.00
A measure = (p): 1,190.00
Net weight (kg) 489‘Technical Specification
Plate Heat Exchanger SIGMA M 35 SAL
Beer,
Heat Transfer Lid,
Customer : Allam Marine
ur inquiry [Item — : 11326 Option 2. 16v4o00G63 AA Therasye" Company
Quote No. | Item + EU0113-13 V01 086612 | Pos.: 2
‘Technical Calculation Cold side Warm side |
‘Section: HTW ethylene glycol 25 % ethylene glycol 50%
Flow rate 45,000.0 Th 100,000.0____ Uh
Mass flow 45.877.1 ki 102,751.1
Heatload Cw]
‘Surface
Temperature in-out Coc $26 703 7000 818
Media ype: Tquid| gaseous |—Tauid | _ gaseous
Density Tm 707 7.028
Specific Heat Kg | 3.839 3.576
“Thermal condustviiy Wik O54 0.415
Dynamic viscosity oP 0.708 0.748
Latent heat 7.000 7060
72.4
Value Wink 2046.0
Excess surface [Fouling % [om*RAW 30,80 [2.9270
Plate material | Gasket material Fung ‘AIST 304 [NBR [ mechanically fixed
No. of plates [ Plate thickness [Noam 36 [0.50/0.50
Pressure loss bar [bar 0150 T 0500
No. of passes | Plate arrangement ‘ountereurreni [1x18 SW a7 3w
Following section: LTW