ZTEDH ZXSDR B8200 GU360 Indoor GSM&UMTS Dual Mode Baseband Unit Hardware Description Version 4.00.30 ‘ZTE CORPORATION INO. 55, Hitech Road South, ShenZhen, PRChina Postcode: $18057 Tel: (88) 755 26771900, Fax: (86) 755 25770801 URL: hte / tate Exmail: [email protected],LEGAL INFORMATION (Copyright © 2010 ZTE CORPORATION. ‘The contents of this document are protected by copyright laws and intemational treaties. Any reproduction or dtribution of this document or any partion ofthis document, in any frm by any means, thou the prior written consent of ZTE CORPO- RATION s prohibited, Addtionally, the contents of this document are protected by contractual confidential obligations. ‘All company, brand and product names are trade or service matks, or registered trade or service marks, of ZTE CORPOR ATION or of their respective owners, This document is provided "a i", and all express, implied, or statutory warranties, representations or condtions are ds- claimed, inducing without limitation any implied warranty of merchartabty,fness for pattcular purpose, title er norin- Fringement, ZTE CORPORATION anditslcensers shall nat be lable For damages resulting from the use oF or reliance on the information contained herein. ZZTE CORPCRATION or its licensors may have current or pencing intellectual property ights or applications covering the subject, tmalter ofthis document. Except as expressly provided in any wien license between ZTE CORPORATION ands licensee, the user of ths documert shallnct acquire any license to the subject matter herein {ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice Users may ist ZTE technical sunpert website hitp:/Jensuppatzte.com cn to inquire related information. ‘The imate right to interpret this product resides in ZTE CORPORATION. Revision History Revision No. _| Revision Date | Revision Reason R10 200901201. First Edition (V4.00.30.05) R2.0 20100326 ‘Second Edition (v4.00.30.07) 1.Cabinet weight is modified 2-Table 2-8, third line is modified to "main version has been booted successfully R21 20100407 Third Edition (V4.00.30.07) 1.Electrical specification, protocol and capacity of interfaces are added Serial Number: sjzi20098473Contents Preface Cabinet, Appearance and Structure ...ccccsssessetenessesseeeesvssseesneeee D Internal Composition... 1 Ventilation Principle s.sscsssssssssssstsuessssseestssnsesseeenesvensees 2 Cabinet Specifications .. 2 Board and Module ... 3 Power Module .. eee 3 Control and Clock Module ....... eeessenneee 5 Universal Baseband Processing Board for GSM...ssssscsese10 Baseband Processing Board Type C seesesessosseseessssseeenen 3 Fabric Switch Module .....ssssscssssssessesenessesseeeessssseeessenss 1S Site Alarm Module ...cscsssscesesssssssssetenessesseesnessssseesesess 7 Site Alarm Extender ...ccsssccccssssseseetnessesseeaesvesseesnnn 23 Cable A Brief Introduction to ZXSDR B8200 GU360 Cables..........29 DC Power Cable... cocci snseeeetenssenneeenis3O Input/Output Dry Contact Cable ....sscecessesseeeseseeenenn 30 RS232/RS485 Interface Cable vassessesesessesseeeesssseeeeien 3 LMT Cable sesccesssseee ctetisssnseeanisnnsesentcsnssseeens 35 GPS Antenna Connection Cable s....sscsesessesseeeesseseeeeie 36 RRU Interface Cable...ssssccccsssssessetenessesseeees vases 36 SA Panel Cable ssssocscsssssseeeetsssssssetenessesseeaes assesses 36 SE Panel Cable sssecscsesssseeeesssssessetenessenseeenessnnseeane 40 Protection Grounding Cable.....cssssscssesusssssseesesssssesenen $4 75 QE1 Cable For AbIS/IUD ...sscsssesssssesssssssstsetsssssesenen 44 120 9 1/100 9 T1 Cable For AbIS/IUD ....sesscssesseeeesseseee 49 Ethernet Fiber Cable for AbIS/IUD ss... SL Ethernet Electrical-Interface Cable for AbIS/IUD........-..000052 Attached Equipment. Lightning Protection Box ......csssssssesessiesssesiessenerseseees 53 Confidential and Proprietary Information of ZTE CORPORATION I2XSOR 88200 GUG6O Hardy are Description TIE PSU SUbFaCK sssccccsssetsseeeesnsntessstensnsetsssesennsene sess 5S PSU SUDPCK cess sss snetensnseenneeninntetsseeensnssennseee 5S PSU AC Input Cable sscssosssssseeesseeesnsetsserensssenseeee56 PSU Power Monitor Cable....cssescssesessssetsseeenenssesnneeeST PSU DC Output Cable .scsccssseesseennsetseeennsennnee 58 Figures. 59 Tables Glossary . HI Confidential and Proprietary Information of STE CORPORATIONPreface Purpose What is in This Manual Intended Reader This manual introduces the third generation mobile communica- tion base station product ZXSDR B8200 GU360 Indoor GSM&UMTS Dual Mode Baseband Unit with focus on its function, equipment in= dices, observed standards and hardware structure, etc This manual contains the following chapters. Chapter ‘Summary Chapter 1 Cabinet This chapter describes cabinet appearance and structure, cabinet internal compositions, cabinet ventilation principles and cabinet specifications Chapter 2 Board and Module This chapter describes the boards and modules of ZXSDR B8200 Gu360 Chapter 3 Cable This chapter describes the cables of ZXSDR 88200 GU360. Chapter 4 Attached Equipment This chapter describes the attached equipment of ZXSDR 8200 GU360. = Base station system engineer = Base station maintenance engineer Confidential and Proprietary Information of ZTE CORPORATION IEXSDR 88200 GU36O Hardy are Description TIE This page is intentionally blank, HI Confidential and Proprietary Information of STE CORPORATIONChapter 1 Cabinet Table of Contents Appearance and Structure Internal Composition. Ventilation Principle Cabinet Specifications ...... Appearance and Structure ZXSDR 88200 GU360cabinet comprises chassis, backplane, and backplane cover. Cabinet Outer structure is shown in Figure 1 FIGURE 1 ZXSDR 68200 GU36OCABINET OUTER STRUCTURE 1 2 3 1. Backplane Cover 3. Chassis 2 Backplane Internal Composition ZXSDR 88200 GU360cabinet interior comprises rack, power sup~ ply, board, fan, and blank panel. Cabinet inner structure is shown in Figure 2. ‘Confidential and Proprietary Information of STE CORPORATION 1EXSDR 88200 GU36O Hardy are Description TIEN FIGURE 2 ZXSDR B8200 GU360CABINET INNER STRUCTURE 1. Power Supply 5. Blank Panel 2 Race 6 Fan 3. Backboard 7. Board 4 Back Cover Plate Ventilation Principle Fan module is responsible for ventilation and heat dissipation ofZXSDR B8200 GU360. Cold air flows in from the right side of the cabinet, Hot air flows out from the left side of the cabinet. Working principle of the fan is shown in Figure 3, FIGURE 3 VENTILATION AND HEAT DISSIPATION Dust filter is fixed on the air-intake side to protect the cabinet from dust. (Dust filter should be leaned regularly to ensure good ventilation effect.) Cabinet Specifications Cabinet Size Cabinet dimension of2XSDR 88200 GU360 is: 88.4 mm (H)x482.6 mm (W)x197 mm (D), or 3.48 in (H)x19 in (W)x7.76 in (D) Cabinet Weight ZXSDR 88200 GU360cabinet weight is not more than 8.75 kg. 2 Confidential and Proprietary Information of STE CORPORATIONChapter 2 Board and Module Function Panel Table of Contents Power Module ...... esscissnneeeetsninsessetstsvasseesnisee 3 Control and Clock Module... Sioccssonseesnsnnes 5 Universal Baseband Processing Board for GSM....c.....ccsseeee 10 Baseband Processing Board Type C wn nensinnsnrseree 8 Fabric Switch Module ....... seosussnaneesssnnioneceensnnes 1S Site Alarm Module ....scscccsssseesnnssssssssnisssssnssesesvenseessnee DT Site Alarm Extender ssscccccsssseenmesssseeseensessenesvesenn 2S Power Module PM provides the following functions: 16 internal interfaces for +12 V load power; 16 internal interfaces for +3.3 V management power; EMMC management; Measurement and protection of input over-voltage/under-volt- age; Output over-current protection and load power management. PM has two kinds of panel: PM1 and PM3. Panels are illustrated in Figure 4 and Figure 5. ‘Confidential and Proprietary Information of STE CORPORATION 32XSOR 88200 GUG6O Hardy are Description TIE FIGURE 4 PM1 PANEL 8 FIGURE 5 PM3 PANEL PM. Indicator Description of PM panel indicators is shown in Table 1 Confidential and Proprietary Information of ZTE CORPORATIONTIER Panel Interface Button Function Chapter 2 Board and Module ‘TABLE 1 PM PANEL INDICATOR DESCRIPTION Indicator | Color | Meaning | Description Name RUN Green | Running | RUN indicator and ALM indicator indicator | flashing alternately: board MMC is in module initializing. Flashing (0.3 s on, 0.3 s off): the board is in normal running state. Off: board self-test fails. ALM. Red | Alarm | Quick flash (0.15 s on, 0.15 s off] indicator | critical or major alarm occurs Slow flash (1.5 on, 1 5 off): minor or warning alarm occurs, Off: no board alarm occurs. PweR Blue | Power on | Always on: board is power on. indicator | Off: board is power off. which is, only on PMS panel PM panel interface is described in Table 2. TABLE 2 PM PANEL INTERFACE Interface | Descrip- | Electrical | Interface | Interface Name. tion Specifica- | Protocol | Capacity tion MON Debugging | 85232 Rs232 115200 bps interface, RS232 serial port -48v/- -48 V input | -40v~-57v | - -48V/7 48VRTN interface | DC power input PM3 panel button is described in Table 3. ‘TABLE 3 PM3 PANEL BUTTON Name Description OFF ON PM3 module switch Off: PM3 is power off ; ON: PM3 is power on Control and Clock Module CC module provides the following functions: = GPS system clock and RF Reference dock; = Abis/lub interface function; ‘Confidential and Proprietary Information of STE CORPORATION 5EXSDR 88200 GU36O Hardy are Description TIEN = Ethernet switch function, providing switch plane for signaling stream and media stream; = Rack management, Panel There are two types of Control and Clock Module. = cco With GPS card and supporting 16 lines of E1. = cz Without GPS card and supporting 8 lines of £1. CC panel is illustrated in Figure 6. O vote: For CC2 board, a label marked with “CC2” exists on the panel. For CO board, no such label exists on the panel. 5 Confidential and Proprietary Information of 2TE CORPORATIONTIER Indicator FIGURE 6 CC PANEL TABLE 4 CC PANEL INDICATOR DESCRIPTION Chapter 2 Board and Modul Description of CC panel indicators is shown in Table 4. Indicator | Color | Meaning Description Name RUN Green | Running RUN indicator and Indicator ALM indicator flashing alternately: board MMC is in module initializing Flashing (0.3 s on, 0.3 s off): the board is in normal ‘Confidential and Proprietary Information of ZTE CORPORATION 7(SDR 88200 GUSEO Hardy are Description TIER Indicator | Color | Meaning Description Name Tanning state Off: board seif-test fails ALM Red Alarm Quick flash (0.15 s on, 0.15 Indicator s off): critical or major alarm occurs. Slow flash (1's on, 1 s off) minor or warning alarm Off: no board alarm occurs. 0s Green | £1/T1 Status | Alternate flash for different Indicator links; the max 4 flashes (Link'0-3) | per second; 0.125 s on, 0.125 s off. ‘The first second: one flash means Link 0 is normal and Off means Link 0 is not in The third second: two flashes means Link 1 is normal and Off means Link Lis not in use ‘The fifth second: three flashes means Link 2 is. normal and Off means Link 2.is not in use ‘The seventh second: four flashes means Link 3 is normal and Off means Link 3 is not in use Recycle, Each cycle lasts for eight seconds. e1s Green | £1/T1 Status | Ditto Indicator (Link’4-7) 2s Green | £1/T1 Status | Ditto Indicator (Link'8-11) 35 Green | £1/T1 Status | Ditto Indicator (Link'12-15) Ms Green | Master/Slave | On: the board is in master Indicator state. Off: the board is in slave state. 8 Confidential and Proprietary Information of ZTE CORPORATIONTIER Button Panel Interface Chapter 2 Board and Module Indicator | color Name Meaning Description REF Green GPS Antenna State or 2 MHz State, Connection state of SMA Interface on correspond- ing panel Always On: antenna feeder is normal Always Off: antenna feeder and satellite are normal, in initialization state. Slow Flash (1.5 5 on, 1.5, s off): antenna feeder is, broken Quick Flash (3 s on, 3 5 off): antenna feeder is normal but cannot receive satellite signal. Slowest Flash (2.5 s on, 2.5 5 off): antenna short circuit Quickest Flash (70 ms on, 70 ms off): no message is received at the initialization stage. eTHO Green ABIS/Iub Interface Link State (On:_physical link of ABIS/Iub network interface (optical or electrical) is normal, Off: physical link of ABIS/Iub network interface is broken. Flashing: there is received or sended data at ABIS/Iub network interface. eTHL Green Link State of ETH1 Network Interface ‘on: physical link of DBG/CAS/OMC network interface is normal Off: physical link of DBG/CAS/OMC network interface is broken. Flashing: there is received or sended data at DBG/CAS/OMC network interface. Description of buttons on CC panel is shown in Table S. TABLE 5 CC PANEL BUTTON DESCRIPTION Button Name_| Description M/s Master/Slave Changeover Button RST Reset Button Description of CC panel interfaces is shown in Table 6. ‘Confidential and Proprietary Information of STE CORPORATION 5‘TABLE 6 CC PANEL INTERFACE DESCRIPTION (SDR 88200 GUSEO Hardy are Description TIER Interface Name Description Electrical Specifica- tion Interface Protocol Interface Capacity. THO Used for Ethernet interface connection between BBU and BSC/RNC, This inter- face is ei ther Ether- net optical interface or electrical interface (10/100 M/1000M self-adap- tive) 1EEESO2.3 ab 1EEE802.32 and 1EEE802.3ab 1000 Mb/S ETH. Used for BBU cascade, de- bugging or local main- tenance. Ethernet electrical interface (10M/100 M/i000M self-adap- tive) 1EEESO2.3 ab 1EEE802.3ab 1000 Mb/S ext External cation port, connected to exter- nal receiver, (mainly R548 in- terface) Rs4as RS485 and PPLS of external GPS REF Connected to GPS signal interface, or 2 MHz BITS signal interface GPS antenna feeder or 2 MHz BITS: GPS antenna feeder or 2 MHz BITS: Universal Baseband Processing Board for GSM Function _UBPG provides the following functions: 10. Confidential and Proprietary Information of ZTE CORPORATIONTIER Panel Indicator Chapter 2 Board and Module Baseband modulation, maximum processing capacity for downlink is 12 carriers; Baseband demodulation, maximum processing capacity for up link is 12 carriers; Supporting Baseband frequency-hopping; Supporting static and dynamic power control UBPG panel is illustrated in Figure 7. FIGURE 7 UBPG PANEL UBPG panel is illustrated in Table 7 ‘Confidential and Proprietary Information of ZTE CORPORATION 42(SDR 88200 GUSEO Hardy are Description TIER ‘TABLE 7 UBPG PANEL INDICATOR DESCRIPTION Indi- | Color | Meaning —_| Description cator Name RUN | Green Running Flashing (0.3 s on 0.3 s off): Indicator the board is in normal running state. Off: board self-test fails ALM Red Alarm Quick flash (0.15 s on0.15 s Indicator off): critical or major alarm Slow flash (1 s ont s off): minor or warning alarm occurs. Off: no board alarm occurs. cst — | Green CPU Running | Flashing at frequency of 1 Hz: Indicator main version has been booted successfully, scs | Green system Clock | Always onsystem clock is in Indicator normal state. Offsystem clock is in abnormal state. Ls Green If there are | Flashing at frequency of 8 optical inter- | Hzand flashing ordinally at facesthe link | different time, the max 3 state of op- | flashes per second tical commu- | The first second: one nicating with | flash means Link 0 RRU optical/backboard link is If there is no | normal and Off means Link 0 optical inter- | is faulty, facethe link | The fourth second: tno state of back- | flashes means Link 1 board optical/backboard link is normal and Off means Link 1 is faulty. ‘The seventh second: three flashes means Link 2 optical/backboard link is normal and Off means Link 2 is faulty. Recycle. Each cycle lasts for nine seconds ss Green If there are | Flashing at frequency of 8 optical in- | Hzand flashing ordinally at terfacesex- | different time, the max 3 istence of op- | flashes per second tical signal at | The first second: one flash ‘optical inter- | means there is signal at Link face 0 optical/backboard link and If there is no | Off means there is no signal at gptical inter- | Link 0. facephysical | The fourth second: two flashes link state of | means there is signal at Link GTP in back- | 1 optical/backboard link and board Off means there is no signal at Link 1 The seventh second: three flashes means there is signal 12 Confidential and Proprietary Information of ZTE CORPORATIONTIER Chapter 2 Board and Module Color Meaning | Description aELink 2 optical backboard link and Off means there is no signal at Link 2, Recycle. Each cycle lasts for Button Description of buttons on UBPG panel is shown in Table 8. ‘TABLE 8 UBPG PANEL BUTTON DESCRIPTION Button Name_| Description RST Reset Button Panel Interface Description of UBPG panel interfaces is shown in Table 9. TABLE 9 UBPG PANEL INTERFACE DESCRIPTION Interface Name Description TXO RXO ~ TX2 RXZ Reserved for future use Baseband Processing Board Type C Function 8PC provides the following functions: Coding/multiplexing, rate matching, channel mapping, spec- trum spreading and scrambling, power weight and channel synthesis for downlink data; Rake receiving and channel decoding for uplink data, transmis- sion of uplink data to Tub interface; Supporting radio link synchronization and transmission-frame processing; Power control; Soft switch; Measurement. Panel BPC panels illustrated in Figure 8 ‘Confidential and Proprietary Information of ZTE CORPORATION 13(SDR 88200 GUSEO Hardy are Description FIGURE 8 BPC PANEL ‘AMORNO BPC UO os TIER Indicator Description of 8PC panel indicators is shown in Table 10 ‘TABLE 10 BPC PANEL INDICATOR DESCRIPTION Indi- | Color | Meaning Description cator Name RUN Green | Running RUN indicator and ALM Indicator indicator flashing alternately: board MMC is in module initializing Flashing (0.3 s on, 0.3 s off) the board is in normal running state. Off: board self-test fails. a ‘Confidential and Proprietary Information of ZTE CORPORATIONTIER Button Function Panel Chapter 2 Board and Module Indi- | Color —_| Meaning Description cator Name ALM. Red Alarm Quick flash (0.15 s on, 0.15 s Indicator off): critical or major ‘alarm Slow flash (1 s on, 1 s off): minor or warning alarm Off: no board alarm occurs. Description of buttons on BPC panel is shown in Table 11 ‘TABLE 11 BPC PANEL BUTTON DESCRIPTION Button Name_| Description RST Reset Button Fabric Switch Module FS provides the following functions: = Baseband IQ data exchange; = Providing interface between BBU and RRU. FS panel is illustrated in Figure 9 ‘Confidential and Proprietary Information of ZTE CORPORATION 15‘SOR 88200 GUS6O Hard are Description TIE FIGURE 9 FS PANEL Indicator Description of FS panel indicators is shown in Table 12 TABLE 12 FS PANEL INDICATOR DESCRIPTION Indicator | Color Meaning | Description Name RUN Green Running | RUN indicator and ALM indicator Indicator | flashing alternately: board MMC. is in module initializing Flashing (0.3 s on, 0.3 off): the board is in normal running state, Off: board self-test fails 16 Confidential and Proprietary Information of ZTE CORPORATIONTIER Interface Function Panel Chapter 2 Board and Module Indicator | Color Meaning | Description Name ALM Red Alarm | Quick flash (0.15 s on, 0.15 Indicator | s off): critical or major alarm Slow flash (1s on, 1 s off): minor or warning alarm occurs. Off: no board alarm occurs. scs Clock For possible future use Indicator Fis Forward | For possible future use Link Indicator RLS Reverse | For possible future use Link Indicator Description of buttons on FS panel is shown in Table 13 TABLE 13 FS PANEL INTERFACE DESCRIPTION Interface | Descrip- | Electrical | interface | Interface Name. tion Specifica- | Protocol | Capacity tion 1x0 RX ~ | optical Optical port | ZTE Internal | 1.2288 TXS RXS | interface, Protocol | Gbps connected to RRU Site Alarm Module SA provides the following functions = Alarm monitor and rev control of no more than 9 fans; = Signal monitor and interface lightning protection for the rack; Providing 6 input dry contact interfaces, 2 input/output dry contact interfaces; = Providing 8 lines of E1/T1 interfaces. SA panel is illustrated in Figure 10. ‘Confidential and Proprietary Information of ETE CORPORATION 17(SDR 88200 GUSEO Hardy are Description FIGURE 10 SA PANEL TIER Indicator Description of SA panel indicators is shown in Table 14. TABLE 14 SA PANEL INDICATOR DESCRIPTION Indicator | Color Meaning | Description Name RUN Green Running RUN indicator and Indicator ALM indicator flashing alternately: board MMC is in module initializing. Flashing (0.3 5 on, 0.3 s off): the board is in normal running state Off: board self-test fails ALM Red Alarm Quick flash (0.15 s on, 0.15 Indicator 5 off): critical or major alarm occurs. Slow flash (1s on, 1 s off) minor or warning ‘alarm Off: no board alarm occurs. Interface Description of interfaces on SA panel is shown in Table 15 ie ‘Confidential and Proprietary Information of ZTE CORPORATIONTIER Jumper TABLE 15 SA PANEL INTERFACE DESCRIPTION Chapter 2 Board and Module Interface | Descrip- | Electrical | Interface | Interface Name. tion Specifica- | Protocol | Capacity tion - Sines of Jex/ties4 |e1/T1es4e | e1/Tirsas EyTi in- | 85/RS232, |s/es232 | 5/rs232(96 terface, dry contact 00 bps) Rs4g5/232 interface, 642 dry contact in- terfaces (6 input lines, 2 bi-direc- tional lines) On For each jumper position, open circuit stands for "0" or “OFF”, and short circuit stands for "1” or “ON”. Jumpers (X1~X6) on SA are configurable. Location of X1~X6 is in shown in Figure 11. FIGURE 11 LOCATION OF X1~X6 ON SA IU ‘per Poston t > [5 Jumper Pasian 2 > Jumper Pasion 3 > 3 per Poston 4 > 7 x Configuration 16. and function of Jumpers (x1~X6) are shown in Table ‘Confidential and Proprietary Information of ZTE CORPORATION 13(SDR 88200 GUSEO Hardy are Description ‘TABLE 16 FUNCTION OF JUMPERS (X1~¥X6) TIER Jum- | Func- per | tion Description xt Used to set RRING and TRING of ey Line ot = Jumper Position 1 is used to set TRING_0 of E1/T1 Line 0 ON indicates that cable jacket is connected to protection grounding, while OFF indicates that cable jacket is left floating = Jumper Position 2 is used to set RRING_O of E1/T1 Line 0 ON indicates that cable jacket is connected to protection grounding via capacitor, while OFF indicates that cable jacket is left floating. = Jumper Position 3 is used to set TRING_1 of E1/T1 Line 1 ON indicates that, cable jacket is connected to protection grounding, while OFF indicates that cable jacket is left floating. = Jumper Position 4 is used to set RRING_1 of E1/T1 Line 1 ON indicates that, cable jacket is connected to protection grounding via capacitor, while OFF indicates that cable jacket is left floating. x2 Used to set RRING and TRING of ey Line 2/3 = Jumper Position 1 is used to set TRING_2 of E1/T1 Line 2 ON indicates that cable jacket is connected to protection grounding, while OFF indicates that cable jacket is left floating = Jumper Position 2 is used to set RRING_2 of E1/T1 Line 2 ON indicates that cable jacket is connected to protection grounding via capacitor; while OFF Indicates that cable jacket is left floating. = Jumper Position 3 is used to set TRING_3 of E1/T1 Line 3 ON indicates that cable jacket is connected to protection grounding, while OFF indicates that cable jacket is left floating. = Jumper Position 4 is used to set RRING_3 of E1/T1 Line 3 ON indicates that, cable jacket is connected to protection grounding via capacitor, while OFF indicates that cable jacket is left floating. 20 ‘Confidential and Proprietary Information of ZTE CORPORATIONTIER Chapter 2 Board and Module jum- | Fune- | Description per | tion x3 used | + sumper Position 1 is used to set TRING_4 of toset |” ELT Line's BRING | ow indicates that cable jacket is connected to mR protection grounding, while OFF indicates that TRING | Cable jacket is left floating Ext |+ aumper Position 2 is used to set RRING.A of Line E/T Line 4 485 ON indicates that cable jacket is connected to protection grounding via capacitor, nhile OFF Indicates that cable jacket is left floating + Bumper Position 3 is used to set TRING_5 of EL/T1 Line 5 ON indicates that cable jacket is connected to protection grounding, while OFF indicates that Gable jacket is left floating + dumper Position 4 is used to set RRING.5 of E/T Line 5 ON indicates that cable jacket is connected to protection grounding via capacter, nhile OFF Indicates that cable jacket is left floating x4 used | + tumper Position 1 is used to set TRING_6 of toset |” ELM Lines BRING | ow indicates that cable jacket is connected to RR protection grounding, while OFF indicates that TRING | Cable jacket is left floating Ext |+ sumper Position 2 is used to set RRING_6 of Une EL/T1 Line 6 6/7 ON indicates that cable jacket is connected to protection grounding via capacitor, nhile OFF Indicates that cable jacket is left floating + Bumper Position 3 is used to set TRING_7 of E1/T1 Line 7 ON indicates that cable jacket is connected to protection grounding, while OFF indicates that Cable jacket is left floating + Bumper Position 4 is used to set RRING_7 of E1/T1 Line 7 ON indicates that cable jacket is connected to protection grounding via capacter, nhile OFF Indicates that cable jacket is left floating xS | Used to | The two MSB positions of x5 (MODE_ABIS<3,2>) set the | is used to set uplink/downlink longrline/short-line Splink | mode {gene = 00xx: uplink short line; downlink short line ink Abis | otxx: uplink short line; downlink long line (int © |= 10xx: uplink long line; downlink short line (inte [2 inc Uplink long line: donlink fong line face Bet | The two LSB positions of XS (MODE_ABIS<1,0>) gen | is Used'to set €1/T1 mode. and x00: E175 2 ars) agi: E1120 xx10: T1100 2 xx1L: reserved ‘Confidential and Proprietary Information of ETE CORPORATION 21‘SOR 88200 GUS6O Hard are Description TIE Jum- | Func- | Description per | tion x6 Used | X6 is set as "000" permanently. to set BDS_ 1D Jumpers (X1~X¢) are used to set whether the E1 transceiving sig- nals are grounded. If the system is configured in £1 759 unbal- anced mode, insert the jumper cap to the E1 link actually in use For example, if E1 Line 0 is in use, insert jumper caps to Jumper Position 1 and Jumpered Position 2 at X1. If all eight lines of £1 are in use, insert jumper caps to all jumper positions at X1~X¢, O vote: If the system is configured in £1 1209 balanced mode or T1 1009 mode, do not insert jumper caps to the jumper positions at X1~X4, XS is used to set uplink/downlink long-line/short-ine mode and E1/T1 mode. For ZXSDR 88200 GU360, merely short-line mode can be configured. Therefore, do not insert jumper caps to the two MSB positions at XS (MODE_ABIS<3,2>). The two LSB positions of XS (MODE_ABIS<1,0>) is used to set £1/T1 made. For details, please refer to Table 16 X6 is set as “000” permanently. The default configuration of X1~Xé is shown in Table 17. TABLE 17 DEFAULT CONFIGURATION OF JUMPERS (X1~X6) Jumper Configuration E1759 £11209 [T1100 XA, 2, X38, x4 Plug in Plug out | Plug out jumper jumper cable | jumper cable (default) | cable (default) xs MoDE_ABIS | Plug out | Plug out_—_| Plug out <3,2> jumper jumper cable | jumper cable (default) | cable (default) (default) MoDE_ABIS | Plug out | Plug out | Plug in jumper Jumper cable | jumper cable (default) | cable (default) MODE_ABIS | Plug out —_ | Plug in Plug out <0> jumper jumper cable | jumper cable cable (default) (default) x6 Plug out | Plug out |_| Plug out jumper jumper cable | jumper cable (default) | cable (default) (default) 22 Confidential and Proprietary Information of ZTE CORPORATIONTIE Chapter 2 Board and Module Site Alarm Extender Function SE provides the following functions = Providing extended full duplex RS232&RS485 communication channel for external monitoring device; = Providing 6 input dry contact interfaces, 2 input/output dry contact interfaces; = Providing 8 lines of €1/T1 interfaces. Panel SE panel is illustrated in Figure 12. FIGURE 12 SE PANEL Indicator Description of SE panel indicators is shown in Table 18. ‘Confidential and Proprietary Information of ETE CORPORATION 23(SDR 88200 GUSEO Hardy are Description TIER TABLE 18 SE PANEL INDICATOR DESCRIPTION Indicator Name Color Meaning Description RUN Green Running Indicator RUN indicator and ALM indicator flashing alternately: board MMC is in module initializing. Flashing (0.3 5 on, 0.3 s off): the board is in normal running state Off: board self-test fails ALM Red Alarm Indicator Quick flash (0.15 s on, 0.15 s off): critical or major alarm occurs. Slow flash (1's on, 1 s off) minor or warning ‘alarm Off: no board alarm occurs. Interface Description of interfaces on SE panel is shown in Table 19 TABLE 19 SE PANEL INTERFACE DESCRIPTION Interface | Descrip- | Electrical | Interface | Interface Name tion Specifica- | Protocol | Capacity tion - Bilines of |e1/TLRs4 | E1/T1Rsae | Ev/TiRsas Ex/T4 i s5/rs232, | S/es232 | $/RS232(96 terface, dry contact 00 bps) ks485/232 interface, 642 dry contact in- terfaces (6 input lines, 2 bi-direc- tional lines) Jumper For each jumper position, open circuit stands for “O” or “OFF”, and short circuit stands for "1" or “ON”. Jumpers (X1~X6) on SA are configurable. Location of X1~Xé6 is in shown in Figure 13. 24 Confidential and Proprietary Information of ZTE CORPORATIONTIER Chapter 2 Board and Module FIGURE 13 LOCATION OF X1~X6 ON SE ‘per Poston t > [5 Jumper Posin 2 > [3 moe Pasion 3 -> (3 °6 per Poston 4 > [7 IL xs Lb x Configuration and function of Jumpers (X1~X6) are shown in Table 20. TABLE 20 FUNCTION OF JUMPERS (X1~X6) jum- | Fune- | Description per [tion xa [used [+ aumper Position 1 is used to set TRING_0 of ftoset | EL/1i Line 0 BRING | OW indicates that cable jacket is connected to an protection grounding, while OFF indicates that TRING | Cable jacket i left Hoating Buta [+ dumper Position 2 is used to set RRING_0 of tne EFA Line © of ON indicates that cable jacket is connected to protection grounding via sapacton ile OFF Indicates that cable Jacket i et foating + dumper Postion 9 is used to set TRING 1 of EIR Line ON indicates that cable jacket is connected to protection grounding, while OFF indicates that Gable Jacke le Heating dumper Postion 4 is used to set RRING_2 of En Lined ON indicates that cable jacket is connected to protection grounding via sapactor hile OFF Indicates that cable Jacket i eft floating x2 [used [+ aumper Position 1 is used to set TRING 2 of fovset | EL/a Line 2 BRING | ow indicates that cable jacket is connected to an protection grounding, while OFF indicates that TRING | Cable jacket i left Heating Gira [+ Jumper Position 2 is used to set RRING.2 of tine En Line2 2 ON indicates that cable jacket is connected to protection grounding via sapacton nile OFF Indicates that cable Jacket i et floating + dumper Postion 9 is used to set TRING 9 of eA7AL Line 3 ‘Confidential and Proprietary Information of ETE CORPORATION 25‘SOR 88200 GUS6O Hard are Description TIE Jum- | Func- | Description per | tion ON indicates that, cable jacket is connected to protection grounding, while OFF indicates that cable jacket is left floating. = Jumper Position 4 is used to set RRING_3 of E1/T1 Line 3 ON indicates that, cable jacket is connected to protection grounding via capacitor, while OFF indicates that cable jacket is left floating. x3 [used [= aumper Poston 4 is used to set TRING 4 of tose |" eM Lnes BRING | ow indicates that cable jacket is connected to ik protection grounding, while OFF indicates that TRING | Goble jacket i leh Heating. Bima [+ aumper Position 2 is used to set RRING 4 of tine ear Line 4/s ON indicates that cable jacket is connected to protection grounding via capacitor while OFF Indicates that cable Jacket is let Hosting. + dumper Position 9 is used to set RINGS of EAM Line ON indicates that cable jacket is connected to protection grounding, nhile OFF indicates that Cable jacket i lef Heating. + dumper Postion 4 is used to set RRING S of EM Line 5 ON indicates that cable jacket is connected to protection grounding via sapacton while OFF Indicates that cable Jacket i left Hosting. x4 [used [= dumper Position 4 is used to set TRING 6 of tose |” ELL Lines BRING | ow indicates that cable jacket is connected to ot protection grounding, while OFF indicates that TRING | Goble jacket is left floating Bima [+ aumper Position 2 is used to set RRING 6 of tine eam Line 6 6/7 ON indicates that cable jacket is connected to protection grounding via capacitor, while OFF indicates that cable jacket is left floating. = Jumper Position 3 is used to set TRING_7 of E1/T1 Line 7 ON indicates that cable jacket is connected to protection grounding, while OFF indicates that cable jacket is left floating = Jumper Position 4 is used to set RRING_7 of E1/T1 Line 7 ON indicates that cable jacket is connected to protection grounding via capacitor; while OFF Indicates that cable jacket is left floating. 26 Confidential and Proprietary Information of ZTE CORPORATIONTIER Chapter 2 Board and Module Jum- | Func- | Description per | tion xs Used to | The two MSB positions of X5 (MODE_ABIS<3,2>) set the | is used to set uplink/downlink long-line/short-line uplink | mode. /downl { = 00x: uplink short line; downlink short line ink Abis Js Ox: uplink short line; downlink long line TRee fs L0xx: uplink long line; downlink short line (inte [4 Lv uplink fong line; downlink long line betw bet | The two LSB positions of XS (MODE_ABIS<1,0>) ge. | is used to set €1/T1 mode. and |= x00: £175 9 BTs) |= xx01: £11209 = x10: T1100 9 "xxl: reserved x6 Used | X6 isset as "000" permanently. to set BDS_ 1D Jumpers (X1~X4) are used to set whether the E1 transceiving sig- nals are grounded. If the system is configured in E1 759 unbal- anced mode, insert the jumper cap to the E1 link actually in use. For example, if E1 Line 0 is in use, insert jumper caps to Jumper Position 1 and Jumpered Position 2 at X1. If all eight lines of E1 are in use, insert jumper caps to all jumper positions at X1~X¢. O vote: If the system is configured in £1 1209 balanced mode or T1 1000 mode, do notinsert jumper caps to the jumper positions at X1~X4. XS is used to set uplink/downlink long-line/short4ine mode and E1/T1 mode. For ZXSDR 88200 GU360, merely short-line mode can be configured. Therefore, do not insert jumper caps to the twa MSB positions at XS (MODE_ABIS<3,2>). The two LSB positions of XS (MODE_ABIS<1,0>) is used to set £1/T1 mode. For details, please refer fo Table 20 X6 is set as “000" permanently. ‘The default configuration of X1~X6 is shown in Table 21. TABLE 21 DEFAULT CONFIGURATION OF JUMPERS (X1~X6) Jumper Configuration EL 752 e11209 |T11009 XA, X2, X3, x4 Plug in Plug out | Plug out jumper jumper cable | jumper cable (default) | cable (default) ‘Confidential and Proprietary Information of ETE CORPORATION 27‘SDR 88200 GUI6O Hard are Description THEN Jumper Configuration xs MODE_ABIS | Plug out | Plug out__| Plug out <3,2> jumper jumper cable | jumper cable (default) | cable (default) (default) MoDE_ABIS | Plug out | Plug out | Plug in jumper jumper cable | jumper cable (default) | cable (default) MoDE_ABIS | Plug out — | Plug in Plug out <0> jumper jumper cable | jumper cable cable (default) (default) x6 Plug out | Plug out |_| Plug out jumper jumper cable | jumper cable (default) | cable (default) (default) 28. Confidential and Proprietary Information of ZTE CORPORATIONChapter 3 Cable Table of Contents A Brief Introduction to ZXSDR 88200 GU360 Cables DC Power Cable.... : Input/Output Dry Contact Cable | RS232/RS485 Interface Cable LMT Cable : GPS Antenna Connection Cable RRU Interface Cable. SA Panel Cable..... SE Panel Cable..... Protection Grounding Cable 75 QE1 Cable For Abis/Iub........ 120 9E1/100 9 T1 Cable For Abis/lub ... Ethernet Fiber Cable for Abis/Iub... Ethernet Electrical-Interface Cable for Abis/lub.. A Brief Introduction to ZXSDR B8200 GU360 Cables ZXSDR B8200 GU360external cables are listed below. = DC Power Cable = Input Dry-contact Interface Cable = Input/Output Dry-contact Interface Cable = RS232/RS485 Interface Cable = LMT Cable = GPS Antenna Connection Cable = RRU Interface Cable = SA Panel Cable = SE Panel Cable = Protection Grounding Cable = 75 Q€1 Cable For Abis/Iub = 120 9 E1/100 9 T1 Cable For Abis/Iub ‘Confidential and Proprietary Information of ZTE CORPORATION 23ZXSDR 88200 GU36O Hard are Description THEN Function Appearance Signal Description Cable Connection Purpose = Ethernet Fiber Cable For Abis/Iub = Ethernet Electrical-interface Cable For Abis/Iub DC Power Cable The cable is used to connect external -48 V DC power supply with ZXSDR B8200 GU360. Cable appearance is shown in Figure 14. FIGURE 14 DC POWER CABLE g O i je te a Black J | FS Cable signal description is shown in Tabl ‘TABLE 22 SIGNAL DESCRIPTION OF DC POWER CABLE Name _| Description Acend Pin B-end Pin -48.VGND] 0 VOC voltage | AL Black conducting -48V | -48. VDC voltage | Az Blue conducting Cable connection between external power supply and ZXSDR 88200 GU360 power module (PM). Input/Output Dry Contact Cable The input/output dry contact cable is used to input and output the dry contact point signals to or out of the devica, 30 Confidential and Proprietary Information of ZTE CORPORATIONTIEN Chapter 3 Cable Physical The physical appearance of the input/output dry contact cable is Appearance shown in Figure 15, End A of the cable is DB25 straight-through connector: FIGURE 15 INPUT/OUTPUT DRY-CONTACT INTERFACE CABLE — = Signal Description The input/output dry contact cable signal is described in Table 23. ‘Confidential and Proprietary Information of ZTE CORPORATION 31.ze NOLLWuodYOD a1z yo UoHIUEUT KreyeLidoig puE feRUEpYUCD ‘TABLE 23 INPUT/OUTPUT DRY CONTACT CABLE SIGNAL DESCRIPTION Signal Lswio GND Lswit . Lswiz - Lswis - Lswia - Definition End A Pin 1 14 2 15 3 16 4 7. 5 18 Cable (White Blue) (white Orange) | (White Green) | (White Brown) (Red Blue) olor signal Lswis - ioswi GND. | 1o_swiz GND - - - - Definition End A Pin 6 19 7 20 8 2 9 22 10 23 Cable (Red orange) (Red Green) (Red Brown) | (Black Blue) (Black Orange) Color () stands for a pair of twisted pair I_SWIO ~ [_SWIS stands for the dry contact input 2-6. 10_SWI1~10_SWI2 stands for the dry contact input/output GG i the common grounding of al Input signals from the dry contact ond bea ei wpleH OEND 00zBa UOSX: wehd1ZTIER Wiring Connection Usage Appearance Signal Description Chapter 3 Cable Connect the dry contact output device to ZXSDR 88200 GU360 ‘SA/SE panel cable B3 port, or connect the SA/SE panel cable 83 to the dry contact signal receiver. RS232/RS485 Interface Cable ‘The cable is serial port communication cable used for communica~ tion between external equipments and ZXSDR 88200 GU360. If ZXSDR B8200 GU360 is installed in Hub cabinet, RS232/ RS485 can also be used as monitor serial port cable that connects ZXSDR. 88200 GU360 with external equipments Cable appearance is shown in Figure 16, A-end connector is DBS (™). FIGURE 16 RS232/RS485 INTERFACE CABLE Cable | Cable 2 Cable signal description is shown in Table 24. ‘Confidential and Proprietary Information of ZTE CORPORATION 33ve NOLLWuodYOD a1z yo UoHIUEUT KreyeLidoig puE feRUEpYUCD ‘TABLE 24 SIGNAL DESCRIPTION OF RS232/ RS485 INTERFACE CABLE Signal Spec- | GNDD Rs485_RX+ RS485_RX- | GNDD Rs4a5_TX+ RS485_Tx- |RS232_RXD RS232_TXD GNDD Acend Pin |1. 6 7 4 8 9 2 3 5 Cable 1 white (white blue) green (white orange) Bi-end Pin / L Cable 2 blue orange white/white B2-end Pin () refers to a tristed pair = 14 refers to the (white green) twisted pai, = “refers to the blue core of (white blue) twisted pair PIN 3 refers to the orange core of (white orange) tristed pair: PIN 5 refers to the white core that connects Gihite orange) fisted pair with (white blue) tristed pair ond bea ei wpleH OEND 00zBa UOSX: wehd1ZTIER Cable Connection Usage Appearance Signal Description Cable Connection Chapter 3 Cable Cable connection between external equipment and 82 port ofZXSDR 88200 GU360 SA panel cable LMT Cable ‘The cable is Ethernet cable which connects ZXSDR 88200 GU360 with local maintenance terminal (LMT). Cable appearance is shown in Figure 17. Cable ends are R145 interfaces FIGURE 17 LMT CABLE a — — Cable signal description is shown in Table 25. TABLE 25 SIGNAL DESCRIPTION OF LMT CABLE Acend Pin signal Cable Color | B-end Pin Specification 1 Lat_etH-TRi+ | white-oreen [1 2 LMT_eTH-TRa- | orange 2 3 Lt_eTH green-white | 3 -TRI+ 4 LMT_eTH green 4 -TRI+ 5 LMT_eTH -TR3- | white-blue 5 6 LMT_eTH -TR2- | blue 6 7 Lt_eTH white-green [7 -TRa+ 8 LMT_eTH -TR4- | brown 8 Cable connection between LMT and ETH1 interface of CC panel {Confidential and Proprietary Information of ETE CORPORATION 352XSOR 88200 GUG6O Hardy are Description TIE Usage Appearance Cable Connection Usage Appearance Cable Connection Usage GPS Antenna Connection Cable GPS antenna connection cable is used for input of GPS satellite signals into ZXSDR 88200 GU360. GPS antenna connection cables are divided into two kinds: SMA (M)-N (M) and SMA (M)-SMA (M). SMA (M)-N (M) is used to con= ect arrester, and SMA (M)-SMA (M) is used to connect power divider. Cable appearance is shown in Figure 18 FIGURE 18 GPS ANTENNA CONNECTION CABLE Cable connection between GPS interface on CC panel and arrester/ power divider RRU Interface Cable Remote RF Unit (RRU) interface cable is used for data transmission betweenZXSDR 88200 GU360 and RRU Cable appearance is shown in Figure 19. A end is waterproof opti- Calinterface (connected to BBU)-8 endis LC-type optical interface FIGURE 19 RRU INTERFACE CABLE Cable connection between optical interface on FS panel and RRU SA Panel Cable SA panel can be used for input of £1/T1 signals, dry contact in- put/output signals, and serial port (R5232/RS485) signals of ex- 36 Confidential and Proprietary Information of ZTE CORPORATIONTIE Chapter 3 Cable ternal equipments. These signals are joined together by SA panel cable at one interface and inputted into SA, Appearance Cable appearance is shown in Figure 20. & end is SCSISO plug. 81 end is 0844 plug. 82 end is O88 plug. 83 end is DB2S plug FIGURE 20 SA PANEL CABLE =O 1631 DS 7 a 7 HI caren es Pint co BD CSS ower so cates Lou e boas Signal Description Cable signal description is shown in Table 26. ‘Confidential and Proprietary Information of ZTE CORPORATION 37ee NOLLWuodYOD a1z yo UoHIUEUT KreyeLidoig puE feRUEpYUCD ‘TABLE 26 SIGNAL DESCRIPTION OF SA PANEL CABLE ond bea ei wpleH OEND 00zBa UOSX: Signal |Rx0- Rx0+ |TX0- TKO+ fRXI- Rat |Da- Dat JRxX2- RxX24 |D@- Det |RXG- RXG+ | DG+ Da- Specifi- cation And |8 6 4 2 aw 4_faz_ aoa azo St 5 3 1 ca Bluek BlueBl | PinkR Pink- | Green Gree | Yell Yello |GrayR GrayB | BlueR Blue | PinkR PinkBl | Green Gree ble#i [edi ackt [edi Bla- [Red nBla JowR wBla [edi lacki fed2 lack2 Jed2 ack2_ | Red2 nBla Es cat [edt da kz. Biend [22 23 [242s 2 3 4 5 6 7 8 9 zo far a2 Signal | 2 2 GND 14s 1485]0 48 048 | cND Lswio Lswit Lswiz Specifi- | 32Rx 32x Te TK | Sat SRK. cation acnd [38 36 | 40 4244 [4s aa | 50 43 4s 47 ca Blue Orang | White/White | (Wh- Gre- | (Wh- Bro- | Red(Mark13) bie#2 e(Mar | (Marki2) teen) ite wn) kaa) B2End | 2 3 5 8 9 6 7 1 ca Blue(Mark1) | Orange(Mar | Green(Mark 3) bie#s k2) B3End 1 2 3 Signal [Rx4- Rx4+ |TXA- Dat |RXS- RxS4 | DG- T+ |RXE- REF | TXE- THEE |RAT- RXTE | DO- T+ Specifi- cation Aend [15 13 [19 23 a1_fas —a7_—sfsas tsa? sss? as ca Yell Yello |GrayR GrayB |BlueR BlueB | PinkR PinkBl | Green Gree Yellow Yello | GrayR Gray8 | BlueR BlueBl bie#1 fowR wela [ed2 lackz feds lacks |ed3 ack3._ |Red3 nBla Red3 wBla feds. lacks | edd acka edz ck2’ ks a3) wehd1ZNOLWUOdIOD aLz Je UoReULOgT AueyeliKo1g ue jeRUEP YES 6 Biend [13 14 [43 aa 39, gosta Sass sz? se faz Signal | 1_swi3, Lswia Lswis GND B_swio1 B_swioz GND Specifi- cation Aend | 49 26 28 34 30 32 34 ca ble#2 B2End ca- Brown(Mark | Blue(MarkS) | Orange(Mar | White(Mark7) | Green(Mark8) | Brown(Mark9) | Red(Mark10) ble#3_| 4) ke) B3End | 4 5 6 14 7 8 20 ( refers to a tristed paic In Cable #1 row of Table 3-6, ‘Blue Red 1' refers to the blue cable with a little red mark on it, Others in this row are inferable by analogy. "Mark 41° refers to the blue and orange cores of (hite blue) & (white orange) twisted pairs. "Mark 12' refers to the white core of (white blue) & (shite orange) twisted pairs, 13 refers to the red core of (red blue) twisted pair ‘Mari 2° refers to the biue core of (white blue) twisted pair ‘Mari 2 refers to the orange core of (white orange) tvisted pair. ‘Mark 3' refers to the green core of (uhite green) tvisted pair. Mark 4 refers to the brown core of (white brown) bristed pait. "Mark 5! refers to the blue core of (red blue) twisted pait."Mark 6 refers to the orange core of (red orange) tvisted pair. "Mark 7" refers to the white core of (white blue) twisted pair Mari © refers to the green core of (red (oreen) twisted pair ‘Mark 9" refars to the brown core of (red brovin) twisted pair "Mark 10" refers to the red core of (red green) twisted pair ba 1Z Byaeo & Headey2XSOR 88200 GUB6O Hardy are Description TIE Cable Connection A end is connected to SCSISO socket on SA panel. 81 end is con~ nected to E1/TI cable. 82 end is connected to RS232/RS485 serial port cable. B3 end is connected to dry-contact signal cable, 84 end is grounded: SE Panel Cable Purpose SE board accepts £1/T1 signal, input/output signal of dry contact and serial signal (RS232/RS485) from external devices. SE panel cable converges singals from those sources into one interface to the SA Physical Feature The physical appearance of SE panel cable is shown in . The A endi is SCSISO connector,the end B1 is D844 connector, the end B2 is DB9 connector, the end 83 is DB25 connector, FIGURE 21 SE PANEL CABLE PHYSICAL APPEARANCE =O 1631 ms 7 HI caren rn CSS ower so cates BS B25 Signal Descriptin The signals of SE panel cable interfaces are introduced in Table 27 40. Confidential and Proprietary Information of ZTE CORPORATIONTHER Chapter 3 Cable re mn oe rR on am aS ne on ake we OLeR=L60M on rg an Soto F St abxm| me FS No HobsELovm on ae ort OL bststHdxm] mo «Zs om | btesetevn | ow re a a He, a0 ta ae we +e aZs no no re o bienssasn [oe HS) aa OLamLgon +9 «z no Soto F at eben] ae as ao | setoztovn | am Qa 4 OLeodotwsn [an Ex ” OL overt oon da aS wo bieeun [ao aQr 5 dtixigon o HR 0 boateoxn | o HRI no beLovn 5 g jak nw OLermstabxa [oo Blas jeanne § | «se av | dteaseva ” i rg ne dotozatata fw Zz [FR a0 soso Leven © Blas at OLbseatabual| a g Les no | oteoetorn [a a [rs “ at evat eta nw 2 |+ge * ut u [rE & [es © ne S | «Qs o nw 4 2 Loew se issoc| eva] Vbs2Hn osdodn Confidential and Proprietary Information of 2TE CORPORATION 412XSDR 88200 GU36O Hardv are Description TITER 9 t 6 a 3 ag 8 ag ag 8 ag 3 re 2 3 “2 8 i f “3 g i 2 5 f “2 8 \ f 9 ° 3 8 “ 3 ote ve - 2s ofS +0 ° Siok + > ee Suk es ° 9 ° 3 $ . 3 x = “§ me > 2 oeBOstersdc| dtve sted 42 Confidential and Proprietary Information of 2TE CORPORATIONNOLWUOdIOD aLz Je UoReULOgT AueyeliKo1g ue jeRUEP YES & Blute (Note 1) or- ange (Note 2) Green (Note 3) Brown (Note 4) Blute (Note 5) or- ange (Note 6) White (Note 7) Green (Note 8) Brown (Note 9) Red (Note 10) 14 20 () stands for a pair of twisted pair Blue red 1 stands for a blue wire with red marking, and so on, Note 12" stands for ( white blue), ( white oranga) twisted pair goes to blue colored and orange colored lead orange) tristed pair goas to white colored lead ;" Note 13” stands for (red blue) twisted pair goes to red colored lead - Note 12" stands for ( white blue), ( white Note 1” stands for (white blue) twisted pair goes to blue colored lead ;" Note 2” stands for ( white orange) twisted pair goes to orange colored lead ;" Note 3” stands for (white green’ twisted pair goes to green colored lead ;" Note 4" stands for ( white brown twisted pair goes to brown colored lead j* Note 5” stands for ( red blue) twisted pair goes to blue colored lead ;" Note 6" stands for (red orange) tristed pair goes to orange colored lead i" Nate 7" stands for ( white blue) bristed pair goes to white colored lead ;" Note 8” stands for (red green tristed pair goes to green colored lead ;" Note 9” stands for (red brown tyisted pair goes to brown colored lead ;" Mote 10” stands for (red green twisted pair goes to red colored lead « ba 1Z Byaeo & Headey2XSOR 88200 GUG6O Hardy are Description TIE Wiring Relation Usage Appearance Cable Connection Usage Appearance The A end is connected to the SCSISO socket on the SE panel. The 81 end is connected to the E1/T1 cable. The B2 end is connected to the RS232/RS485 serial cable. The B3 end is connected to the dry contact signal cable. B4 end is connected to grounding. Protection Grounding Cable The cable connects ZXSDR 88200 GU360 with grounded counter- poise, which ensures safety of person and equipment. Cable appearance is shown in Figure 22. The cable is a yellow- green wire (Lomm2) with crimped TNR terminals at both ends. FIGURE 22 PROTECTION GROUNDING CABLE Ox ©) Cable connection between protection grounding paint on ZXSDR 88200 GU360 and grounding bar 75 Q E1 Cable For Abis/lub The cable is used as transmission cable to transmit interface infor mation betweenZXSDR B8200 GU360 and RNC/BSC. Appearance of two types of 75 @ E1 cables is shown in Figure 23 CBble in the upper pleture supports connection with 8 lings OFET Cable in the lower picture supports connection with 4 lines of E1 Aend of the cable is DB44 straight plug FIGURE 23 75 9 E1 CABLE FOR AgIs/1UB 144 Confidential and Proprietary Information of ZTE CORPORATIONTIE Chapter 3 Cable Signal Description Signal description of 75 9 £1 cables (8 lines) is shown in Table 28. ‘Confidential and Proprietary Information of ZTE CORPORATION 45NOLLWuodYOD a1z yo UoHIUEUT KreyeLidoig puE feRUEpYUCD ‘TABLE 28 SIGNAL DESCRIPTION OF 75 © El CABLE (8 LINES) Signal | Rx0- RXO+ | THO- TxO+ | RXI- RXI+ | Da- Dat | Rx2- Re] De- Det] RG- RG} DG- Der Spec ifica- tion aend| 22 23 | 24 9 25 1 2 3 4 5 6 7 8 ° ao J at az Pin cable | a-a- 2-2-2 a-2- fas 23a Jaa ra fas as-[a6- re |a-7- a-7-]re 18 Golor | out in | out in | out in | out in | out in | out in | out in | out in Signal | Rx4- RXat | DE- Txa+ | RXS- _RxS+ | TS- TSH | RxE- RxEH | TKE- THEE | RX7- RXTE | DO TT Spec- ifica- tion aend| 13 14 | 43 44 | 39 40 | 42 42 | 35 36 | 37 38 | a2 32 | 33. 34 Pin cable | 2-1- 2-1- | 2-2- 2-2- | 2-3- 23 | 24- 24- | 2s- 2-5-| 2-6- 2-6-2] 1-7- 2-7-] 28 2-8- Golor | “out “in | “out “in | “out “in | “out “in | “out “in | “out “in | “out “in | “out “in Code in! and 'I-1-out' respectively refers to the internal and external conductor of the coaxial cable (marked ar 1) among 1#8 core micro-coaxial cables. ond bea ei wpleH OEND 00zBa UOSX: wehd1ZTIE Chapter 3 Cable Signal description of 75 9 £1 cables (4 lines) is shown in Table 29. ‘Confidential and Proprietary Information of ZTE CORPORATION 47oF NOLLWuodYOD a1z yo UoHIUEUT KreyeLidoig puE feRUEpYUCD ‘TABLE 29 SIGNAL DESCRIPTION OF 75 © El CABLE (4 LINES) Signal | Rx0- RXO+ | THO- TxO+ | RXI- RXI+ | Da- Dat | Rx2- Re] De- Det] RG- RG} DG- Der Spec ifica- tion aend| 22 23 | 24 9 25 1 2 3 4 5 6 7 8 ° ao J at az Pin cable | 1-out 1-in | 2-out 2-in | 3-out 3-in | 4-out 4-in | Sout S-in | 6-out 6-in | 7-out 7-in | 8-out 8. olor Code in! and ‘t-out’ respectively refers to the internal and external conductor of the coaxial cable (marked as 1) among @ core micro-coaxial cables, ond bea ei wpleH OEND 00zBa UOSX: wehd1ZTIER Cable Connection Usage Appearance Signal Description Chapter 3 Cable Cable connection between B1 end on SA panel and DOF. 120 Q E1/100 1 T1 Cable For Abis/lub The cable is used as transmission cable to transmit interface infor mation betweenZXSDR 88200 GU360 and RNC/BSC, Cable appearance is shown in Figure 24. A end of the cable is B44 straight plug FIGURE 24 120 9 £1/100 9 T1 CABLE FoR ABIS/IUB 7 3 120 9 £1/100 9 T1 cables are divided into two types: cables sup- Porting connection with 8 lines of €1/T1 and cables supporting connection with 4 lines of E1/T1. Appearance of the two types of cables is the same, while their core quantity varies, Cable signal description is shown in Table 30. ‘Confidential and Proprietary Information of ZTE CORPORATION 43os NOLLWuodYOD a1z yo UoHIUEUT KreyeLidoig puE feRUEpYUCD ‘TABLE 30 SIGNAL DESCRIPTION OF 120 9 E1/100 9 T1 CABLE Signal | Rxo- RXO+ | THO- TxO# | RXI- RXI+ | Da- Dat | Rxe- Re] De- Det] RG- RG} DG- Der Sprci- fica- tion aend| 22 23 | 24 9 25 1 2 3 4 5 6 7 8 ° ao J at az Pin cable | Bluey Blue | Pink/1 Pink/1| Green Gree | Yellow Yello | Gray/ Gray | Blue/ Blue | Pink/2 Pink/2} Green Gree Golor | 1Red /aBl | Red Black | /iRed n/1Bi | /1Red w/18 | 1Red /1Bl | 2Red /2BI | Red Black | /2Red n/2Bl Code ack ack lack ack ack ack Signal | Rx4- RXa+ | D@- TxA4 | RXS- _RxS+ | TS- TSH | RxE- RxE | TXE- TXE | RX7- RXTE | TDO- TDT+ Spec ifica- tion aend| 13 14 | 43 44 | 39 40 | 41 42 | 35 36 | 37 38 | 31 32 | 33 34 Pin cable | Yellow Yello | Gray/ Gray | Blue/ Blue | Pink/3 Pink/3| Green Gree | Yellon Yello | Gray/ Gray | Blue/ Blue Color | /2Red /2B | 2Red /2B1 | 3Red /3Bl | Red Black | /3Red n/3Bl | /3Red w/38 | 3Red /3BI | 4Red — /4Bl Code lack ack ack ack lack ack ack = "Blue/t red! refers to the blue cable with a litle red mark on it Pink/1 red! refers to the pink cable with a litle red mark. (thers are inferable by analogy. ond bea ei wpleH OEND 00zBa UOSX: wehd1ZTIER Cable Connection Usage Appearance Cable Connection Usage Appearance Chapter 3 Cable Cable connection between B1 end on SA panel and DOF. Ethernet Fiber Cable for Abis/lub The cable is used for signal transmission over Abis/Iub interface. (RNC/BSC<=>Node 8/35). Cable appearance is shown in Figure 25. Both ends of the cable are Le-type optical connectors--‘The yellow cable is single mode fiber. The orange cable is multi-mode fiber. FIGURE 25 ETHERNET FIBER CABLE FOR ABIS/1UB Cable connection between ETHO optical interface on CC panel and transmission equipment Ethernet Electrical-Interface Cable for Abis/lub The cable (Ethernet cable) is transmission cable which trans- mits interface information between ZXSDR 88200 GU360 and RNC/BSC. Cable appearance is shown in Figure 26. Both ends of the cable are R145 interfaces. ‘Confidential and Proprietary Information of ZTE CORPORATION Si.EXSDR 88200 GU36O Hardy are Description TIER FIGURE 26 ETHERNET ELECTRICAL-INTERFACE CABLE FOR ABIS /IUB tS S00 Signal Description Cable signal description is shown in Table 31. i= ‘TABLE 31 SIGNAL DESCRIPTION OF ETHERNET ELECTRICAL-INTERFACE CABLE FOR ABIS /IUB A-endPin —_| signal Cable Color | B-end Pin Specification 1 GE-TRI+ white-orange [2 2 GE-TRI- orange 2 3 GE-TR2+ white-green | 3 4 GE-TR3+ Green 4 5 GE-TR3- white-blue 5 6 GE-TR2- blue 6 7 GE-TRA+ white-green | 7 8 GE-TRA- Brown 8 Cable Connection Cable connection between Abis electrical interface on CC panel and Ethernet switch/other transmission equipment 52. Confidential and Proprietary Information of ZTE CORPORATIONChapter 4 Attached Equipment Appearance Interface Table of Contents Lightning Protection BOx...ss:esssssssesnerennneeesesnneetnsenees S3 PSU SUbFACK ..soeccssssssnnnnnnnninnsnonnnnatninieniennnnenneeee 58 Lightning Protection Box Lightning protection box protects signals of RS485, RS232, dry contact, E1 and FE/GE electrical interface from lightning stroke. The box is used to prevent the incoming of induction lightning stroke and static electricity into ZXSDR 88200 GU360 via exter- nal cables, thus protecting the board interface circuit from being damaged. The box provides lightning protection for: = 8 lines of dry contact; = 1 line of RS485 and 1 line of RS232; = 8 lines of €1; = 2 lines of FE/GE electrical interface. Appearance of lightning protection box is shown in Figure 27. FIGURE 27 LIGHTNING PROTECTION BOX ‘The external interfaces of lightning protection box are shown in Figure 28, FIGURE 28 EXTERNAL INTERFACES OF LIGHTNING PROTECTION BOX E ‘Confidential and Proprietary Information of ZTE CORPORATION 53‘SOR 88200 GUS6O Hard are Description TIE Ono Unm arked interfaces in Figure 28 are spare extension interfaces: Cable Connection External cables of lightning protection box are listed below. = RS232/RS485 monitor cable = Dry contact monitor cable = E1/T1 cable = Ethernet cable Wiring of lightning-protection-box external cables is described in Table 32 ‘TABLE 32 WIRING OF LIGHTNING-PROTECTION-BOX EXTERNAL CABLES Cable Name Interface Name _| Opposite-end Equipment Type S232/RS485 S232/RS485_EM —_| Monitor equipment monitor cable Dry contact monitor | MON IN/OUT_GO Monitor equipment cable E1/T1 cable Bsc_co Transmission equipment Ethemet cable ABIS_1/ABIS_O Transmission equipment BBU_A1/BBU_AO BBU Data cable BBU BBU Data cables connect lightning protection box and ZXSDR 88200 GU360. Appearance of data cables is shown in Figure 29. FIGURE 29 DATA CABLE A Bl C_] (—_] = — = =, () B2 Wiring of data cables is described below, 54 Confidential and Proprietary Information of ZTE CORPORATIONTIER Function Panel Indicator Chapter 4 Attached Equipment = Aend is connected to SA module of ZXSDR B8200 GU360. = B1 end is connected to data-cable interface of the lightning protection box = B1 end is connected to grounding end of the lightning protec tion box. PSU Subrack PSU Subrack PSU module is for AC/DC conversion, which provides the -54 VDC power supply for ZXSDR 88200 GU360. O nore: ‘The input voltage for the PSU subrack to run normally is from 90 V to 250 V AC and the temperature is from -40°C to +65°C. O nore: By standard, the PSU subrack is configured with one PSU module (single power supply). Two PSU modules (dual power supply) are optional. In the manual, figures are taking dual power supply as examples. The panel of the PSU subrack is as shown in Figure 30. FIGURE 30 PANEL OF PSU SUBRACK 2. ~48veTH/-48v 3. Mon 2. 100V-240v~ INPUT. The indicators on the PSU panel are as shown in Table 33. ‘Confidential and Proprietary Information of ETE CORPORATION 55‘SDR 88200 GUI6O Hard are Description THEN ‘TABLE 33 INDICATORS ON PSU PANEL Indicator _| Color Meaning Description RUN Green Running Constantly ON: The indicator power supply is Tunning normally. ALM Red Alarm indicator | Constantly On: The Power supply is abnormal (input over-voltage/input under-voltage/out- put over-volt- age/poner supply over-temperature protection/output under-voltage/ or Power supply fail- ure, etc.) Button The buttons on the PSU panel are as shown in Table 34. ‘TABLE 34 BUTTONS ON PSU PANEL Button Description 1/0 switch Power supply ON/OFF Interface The interfaces on the PSU panel are as shown in Table 35, ‘TABLE 35 INTERFACES ON PSU PANEL Interface Description -48VRTN/-48V -S4V output interface O note: ‘The silkscreen (-48V) indicates the power supply state for common telecommunications. For 2XSDR 88200 GU360, in normal cases, the PSU module outputs -54 V DC. 100V-240V ~ INPUT | 220 V AC input interface MON Monitor interface of the PSU module PSU AC Input Cable Purpose The PSU AC input cable is used to lead the 220 V AC to the PSU module. Appearance The appearance of the PSU AC input cable is as shown in Figure 31 536 Confidential and Proprietary Information of ZTE CORPORATIONTIER Signal Description Connection Relationship Purpose Appearance Signal Description Chapter 4 Attached Equipment FIGURE 31 APPEARANCE OF PSU AC INPUT CABLE ‘The order to solder the cable at End A/B: L - Brown, N - Blue, G - Black or yellow-green End A of the PSU AC input cable is connected to the 100V-240V~ INPUT interface on the PSU module and End B is connected to the 220 V AC power supply system (L is connected to the phase wire, Nis connected to the zero line and G is connected to the grounding cable) PSU Power Monitor Cable ‘The PSU power monitor cable is used to report the running state of the PSU module to ZXSDR B8200 GU360 and then ZXSDR B8200 GU360 reports to the NM. ‘The appearance of the PSU power monitor cable is as shown in Figure FIGURE 32 APPEARANCE OF PSU POWER MONITOR CABLE ‘The signal description of the PSU power monitor cable is as shown in Table 36. ‘TABLE 36 SIGNAL DESCRIPTION OF PSU POWER MONITOR CABLE signal | Mi_p- cnopd | mz_p- GNDD | FAN. GNDD we WR ALM ALM ALM End A 1 2 3 4 6 7 pinout Cable | (White Blue) | (White Orange) | (White Green) spec trum End B 1 14 2 15 3 16 pinout ‘Confidential and Proprietary Information of ETE CORPORATION 572XSOR 88200 GUG6O Hardy are Description TIE Cable Connection Relationship Purpose Appearance Signal Description Cable Connection Relationship End A of the PSU power monitor cable is connected to the MON interface on the PSU module and the connection of End B falls into the following two cases: = without lightening protection subrack: End 8 of the PSU power monitor cable is connected to 84 (dry contact) of the SA panel cable (data cable) "With lightening protection sunrack End 8 of the PSU power monitor cable is connected to the dry contact monitor interface of the lightening protection subrack. PSU DC Output Cable ‘The PSU DC output cable is used to lead the -54 V DC from the PSU module to ZXSDR B8200 GU360. ‘The appearance of the PSU DC output cable is as shown in Figure EE} FIGURE 33 APPEARANCE OF PSU DC OUTPUT CABLE The signal description of the PSU DC output cable is as shown in Table 37. TABLE 37 SIGNAL DESCRIPTION OF PSU DC OUTPUT CABLE Signal End A End B Cable Spectrum ~48V GND AL AL Black -48v 43 Az Black End A of the PSU DC output cable is connected to the -48VRTN/- 48V interface of the PSU module and End 8 is connected to the -48V/-48VRTN interface of the ZXSDR 88200 GU360 PM module. 58 Confidential and Proprietary Information of ZTE CORPORATIONFigures Figure 1 ZXSDR 88200 GU360Cabinet Outer Structure ... 1 Figure 2 ZXSDR B8200 GU360Cabinet Inner Structure... 2 Figure 3 Ventilation and Heat Dissipation 2 Figure 4 PM1 Panel 4 Figure 5 PM3 Panel 4 Figure 6 CC Panel. eT Figure 7 UBPG Panel ed Figure 8 BPC Panel a4 Figure 9 FS Panel . 16 Figure 10 SA Panel - 18 Figure 11 Location of X1~X6 on SA 219 Figure 12 SE Panel - 223 Figure 13 Location of X1~X6 on SE 225 Figure 14 DC Power Cable. eeeetsveseee 30 Figure 15 Input/Output Dry-Contact Interface Cable.......031 Figure 16 RS232/RS485 Interface Cable 233 Figure 17 LMT Cable ceeet 235 Figure 18 GPS Antenna Connection Cable . 36 Figure 19 RRU Interface Cable...... 36 Figure 20 SA Panel Cable... cess 37 Figure 21 SE Panel Cable Physical Appearance... 40 Figure 22 Protection Grounding Cable... 244 Figure 23 75 9 €1 Cable for Abis/Iub ..... 244 Figure 24 120 9 £1/100 9 T1 Cable For Abis/Iub 249 Figure 25 Ethernet Fiber Cable for Abis/Iub eee SL Figure 26 Ethernet Electrical-interface Cable for Abis/IUb ~..-52 Figure 27 Lightning Protection Box sesesssnseeees 5B Figure 28 External Interfaces of Lightning Protection Box ........53 Figure 29 Data Cable 254 Figure 30 Panel of PSU Subrack ........ - 55 Figure 31 Appearance of PSU AC Input Cable . seess ST Figure 32 Appearance of PSU Power Monitor Cable ........s.s57 Figure 33 Appearance of PSU DC Output Cable... 58 Confidential and Proprietary Information of 2TE CORPORATION 59EXSDR 88200 GU36O Hardy are Description TIE This page is intentionally blank, 50 Confidential and Proprietary Information of ZTE CORPORATIONTables Table 1 PM Panel Indicator Description... 5 Table 2 PM Panel Interface 5 Table 3 PM3 Panel Button . - 5 Table 4 CC Panel Indicator Description 7 Table 5 CC Panel Button Description a) Table 6 CC Panel Interface Description....... 10 Table 7 UBPG Panel Indicator Description 12 Table 8 UBPG Panel Button Description ...... 213 Table 9 UBPG Panel Interface Description 213 Table 10 BPC Panel Indicator Description a4 Table 11 BPC Panel Button Description...... 1S Table 12 FS Panel Indicator Description .. 16 Table 13 FS Panel Interface Description .. 17 Table 14 SA Panel Indicator Description .. 18 Table 15 SA Panel Interface Description .. 219 Table 16 Function of Jumpers (X1~X6) .... e100 Table 17 Default Configuration of Jumpers (x1~X6) 122 Table 18 SE Panel Indicator Description .. 224 Table 19 SE Panel Interface Description .. 224 Table 20 Function of Jumpers (X1~X6) .... eee 25 Table 21 Default Configuration of Jumpers (x1~X6) 27 Table 22 Signal Description of DC Power Cable ... 210130 Table 23 Input/Output Dry Contact Cable Signal Description ....32 Table 24 Signal Description of RS232/ RS485 Interface Cable...34 Table 25 Signal Description of LMT Cable 235 Table 26 Signal Description of SA Panel Cable..... 38 Table 27 SE Panel Cable Signal Description eee 1 Table 28 Signal Description of 75 9 €1 Cable (8 lines) 46 Table 29 Signal Description of 75 9 E1 Cable (4 lines) 48 Table 30 Signal Description of 120 9 £1/100 9 T1 Cable ........50 Table 31 Signal Description of Ethernet Electrical-Interface Cable for Abis/lub. 52 Table 32 Wiring of Lightning-protection-box External Cables ....54 Table 33 Indicators on PSU Panel... 56 Confidential and Proprietary Information of ZTE CORPORATION 1EXSDR 88200 GU36O Hardy are Description TIEN 56 56 Table 34 Buttons on PSU Panel .. Table 35 Interfaces on PSU Panel... ee Table 36 Signal Description of PSU Power Monitor Cable..........57 Table 37 Signal Description of PSU DC Output Cable 58 62. Confidential and Proprietary Information of ZTE CORPORATIONGlossary BBU = BaseBand Unit BPC ~ Baseband Processing Board Type C Bsc ~ Base Station Controller BSP = Board Support Package BTS = Base Transceiver Station cc ~ Control and Clock Module DDF = Digital Distribution Frame EMMG = Enhanced MMC FS ~ Fabric Switch Module cps = Global Positioning System GTP. = GPRS Tunneling Protocol PM = Power Module Psu = Power System Unit RNG = Radio Network Controller RRU = Remote Radio Unit SA = Site Alarm Module TNR = Non Insulated Ring Terminals uBPG = Universal Baseband Processing Board for GSM ‘Confidential and Proprietary Information of ZTE CORPORATION 63