Industrial
Hydraulics
Electric Drives
and Controls
Linear Motion and
Assembly Technologies
Always a cut above.
Intelligent solutions for
cutting machine tools
The Drive & Control Company
Pneumatics
Service
Automation
Mobile
Hydraulics
The requirements for machine tools
are constantly increasing
The process know-how of Rexroth
increases your performance
Increase the productivity and efficiency of your solutions now. Because at Rexroth you receive cross-technology solutions
from hydraulics, pneumatics, electric control and drive technology, as well as linear and assembly technology from a single
source. The advantage: Rexroth advises you objectively on which technology is best suited for which process. You not only
receive best-in-class components, but also a modular system with matched systems and interfaces. In addition, we also
provide you with a broad range of engineering competence with simulation and project planning know-how. This range
of products and services is rounded off with a comprehensive after-sales program that keeps production running. And last
but not least, the worldwide presence of Rexroth is a decisive advantage for your machines.
More speed
through highly dynamic linear motors, linear
guides and high-speed spindle drives.
More flexibility
through cross-technology consulting and
solutions optimized for the specific application.
More precision
through high-precision electromechanical and
electrohydraulic positioning axes precisely
guided with profile rail guides and equipped
with either a pneumatic or hydraulic counterbalance.
More protection and safety
for people and machines through electrical
drive technology with integrated safety functions. Safety fence technology enable safe
working conditions. Air purge and seal protect
sensors, glass scales and spindles from contaminants.
More availability
through cross-technology, global service with
industry-specific know-how, preventative
maintenance concepts, including e-mail connection and teleservice.
Inquiry
Industry-specific consulting
Feasibility studies
Offer preparation
Project support
Simultaneous
Engineering
Consulting, planning and
idea-finding
Conducting of simulations
Verification of innovative
projects
Project Planning
Engineering
Interface tests
Pre-delivery checking
Technical documentation
Commissioning
Field service
Service Hotline
Online support
Training
Series Production
(After-Sales-Support)
Teleservice
Spare parts management
Maintenance
Retrofitting
Maintenance schedules/
service concepts
Process optimization
In addition, Rexroth also realizes cross-technology
solutions for the following applications:
The solutions for practical use come from Rexroth
Those who work with Rexroth receive standardized drive and control solutions for high productivity, flexibility
and optimized process reliability. In particular, the open system architecture of the electrical controllers ensures
continuous communication from the command to the operating level to the drive. For this purpose we offer
best-in-class components in a broad range of technologies for excellent performance matched to each other and
produced according to the strictest quality guidelines.
Torque motors optimized for accurate positioning of heavy loads.
Workpieces are centered and reliably clamped with hydraulic
circuits. The correct positioning
of the workpiece is checked with
a pneumatic contact monitoring
device.
Solutions for machining centers
and lathes:
Ethernet
Operation +
visualization
control
Field bus
Read/write
workpiece data
I/O peripherals
Main spindle
Tool-holding
Driving
Sercos
Tool feed
Positioning
Air purge
and seal
Guiding
Counterbalance
Safety/loading door
Open/close
Hydraulic
Safety technology
Electric
Hydraulic
Pneumatic
EcoSafe
VarioFlow
Safety fence
Interlinking
Pneumatic
Electric
Rotary table
Pneumatic
Round cycle machines
Water jet cutting/Deburring systems
Milling machines
Interlinking systems
Solutions especially for lathes
Ethernet
Control
Main spindle
Rexroth offers scaleable control
systems with a uniform, userfriendly user interface. The support
of the common communication
standards and field buses enables
seamless integration.
Highly dynamic modular motors
drive the spindles and can be
protected against the effects of
aggressive media with sealing air.
Rexroth provides ready-to-install,
tested chucking circuits For chucking the tools.
Tool feed
For top precision Rexroth offers
electrohydraulic and electromechanical solutions, each with the suitable mounting channel guidance.
With vertical axes these systems can
be expanded with pneumatic and
hydraulic counterbalance systems.
Sealing air for glass scales and rotary transducers ensure consistently
high production quality.
Headstock
I/O peripherals
Operation +
visualization
control
Field bus
Sercos
Headstock
Setting clamping
pressure
Read/write
workpiece data
Safety door
The safety door is opened and
closed either hydraulically or pneumatically. Movements are reliably
monitored with the safety door
open by the safety functions integrated in the electric drive.
Main spindle
Workpiece-holding
Positioning
Chucking
Positioning
Guiding
Compensating
Highly dynamic modular motors
drive the spindles and can be protected against the effects of aggressive media with sealing air. The
clamping pressure is conveniently
set with a motor-adjusted clamping
pressure valve. The correct positioning of the workpiece is ensured
with a pneumatic contact monitoring device.
Tool turret
Hydraulic
Electric
Checking
Sealing air
Pneumatic
Hydraulic
Safety door
Workpiece position
checking
Tool feed
Driving
Hydraulic
Power supply/infeed
Hydraulic
Gantry/Handling
Grinding and gear machines
Solutions for machining centers:
Rotary table
Transfer lines
Open/close
Safety technology
Tool turret
Swiveling
Power supply/infeed
Hydraulic
Electric
Pneumatic
Torque motors optimized for a
high torque swivel the tool revolver.
The necessary locking can be realized with hydraulic or pneumatic
system solutions.
Bosch Rexroth AG
97814 Lohr am Main, Germany
[email protected]
www.boschrexroth.com
Printed in Germany
RE 00 089/06.03
