Gardobond A 4961
One Step Detergent Iron Phosphate for Manual High Pressure Spray or Steam
Application, Molybdate free
PRIMARY APPLICATION
Oakite Gardobond A 4961 is a liquid one step manual phosphating product formulated to simultaneously clean
and prepare large parts for painting. It is designed for use in manual applications utilizing a high-pressure spray
or steam unit. What makes Oakite Gardobond A 4961 unique is that it can be used without a subsequent rinse.
The coating developed by Oakite Gardobond A 4961 provides increased paint adhesion under todays modern
finishes.
Oakite Gardobond A 4961 has excellent cleaning capabilities. The surfactant package was chosen to remove
typical soils used in the manufacture of large parts. It was proven to have superior cleaning properties
compared to the manually applied detergent iron phosphates available today. Whats more, Gardobond A 4961
is biodegradable.
It has been formulated to overcome the effects of hard water and reduce streaky coatings, both chronic
problems in treating large parts.
Consult your Oakite Technical Sales Specialist for information on Oakite application equipment - steam
generators (portable & stationary), hot/high pressure units, spray wands and associated equipment.
CHEMICAL CHARACTERISTICS
chemical composition ........................................ phosphates, activators, wetting agents, surfactants
physical form ...................................................... pale yellow liquid
odor ................................................................... slight amine
specific gravity .................................................... 1.140 @ 20C (68F) ASTM 1298
bulk density......................................................... 9.5 lb./gal @ 20C (68F)
biodegradable surfactants .................................. yes
color - concentrated ......................................... pale yellow
- as used ................................................. clear
behavior in hard water ........................................ good
pH
- concentrated........................................... 3.3-3.7
- as used................................................... 3.5-4.5 @ 1% by volume
maximum solubility ............................................. complete
APPLICATION PROCEDURE
Oakite Gardobond A 4961 may be applied by a manual high-pressure spray or a steam unit under the following
process parameters:
Concentration .............................0.5 to 2.0% at the nozzle
pH ...............................................3.5 to 4.5
Time .................... as required
Temperature........ dependent on application equipment. Sump solutions max. 140F
Solution Control: Oakite Gardobond A 4961 is controlled using Gardotest Procedure 154.
Sample Size: 25.0 mls
Factor: 0.13
EQUIPMENT
The Chemetall Oakite Electro-Steam Generators, Hot Hi-Pressure Washers, or Pressure Island systems can be
used to steam/hot water clean or phosphatize larger parts using this product. Please contact the Chemetall
Oakite Process Equipment and Engineering Department for specific recommendations.
NOTES ON USE (See Material Safety Data Sheet)
Stainless steel tanks and equipment are recommended, preferably types 316 or 321. Mild steel can be used,
but the life of the equipment will be reduced due to the corrosive nature of acidic phosphate products. Heating
coils and equipment should be constructed of stainless steel.
Avoid contact with or mixing with chlorine-releasing materials.
SAFETY AND HANDLING
Prior to handling and use of Gardobond A 4961, the Material Safety Data Sheet should be read and understood
by all personnel in contact with the product.
KEEP OUT OF REACH OF CHILDREN
STORAGE
Dry indoor storage at temperatures between 40 F and 100F is recommended, away from any incompatible
materials referenced in Material Safety Data Sheets. All containers should be kept tightly closed when not in
use.
DISPOSAL
Any disposal of the materials referenced in this document should be in accordance with all applicable federal,
state and local regulations. Process solutions can contain components other than those present in the materials
as supplied. Analysis of process solutions may be required prior to disposal.
Oakite Products, Inc. warrants that the product or products described herein will conform with its published specifications. The products supplied by Oakite and information related to them are intended for
use by buyers having necessary industrial skill and knowledge. Buyers should undertake sufficient verification and testing to determine the suitability of the Oakite materials for their own particular purpose.
Since buyers conditions of use of products are beyond Oakites control, Oakite does not warrant any recommendations and information for the use of such products. OAKITE DISCLAIMS ALL OTHER
WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE IN CONNECTION WITH THE USE OF ITS
PRODUCTS.
ISO 9001:2000
FM 93653
Corporate Headquarters and Eastern Branch (800) 526-4473 Central Branch (Midwest) (877) 941-3800
Western Branch (800) 331-1197 Oakite Canada Limited (800) 668-4318
Chemetall Mexicana 011 52 55 5656 1490 Chemetall do Brasil Ltda. (5511) 4066 8800
Website: www.oakite.com E-mail: [email protected] Shop online at www.oakitestore.com
F.16932-6/01
Printed in USA
