Modular multistage pumps
SIHImulti
Type MSL, MSM
Description
SIHImulti pumps are horizontal multistage centrifugal pumps
of ring-section design, which meet the technical
requirements of ISO 5199 / EN 25199.
The advanced modular design reduces the number of parts
whilst maximising interchangeability.
Optimal selection of impeller diameter and diffuser size for
each ensures that the pump closely match the required duty
conditions.
Applications
Construction
Pumps of the SIHImulti range meet the specific requirements
of many applications, such as:
Different hydraulic impeller and diffuser sizes can be
installed in a standardised casing, thus enabling the pump
to be designed exactly for the working point required. The
first stage of each pump size is equipped with an suction
impeller.
Axial thrust is hydraulically balanced by a patented balance
drum system with a self-adjusting throttling device. Residual
thrust is absorbed by a generously-sized angular-contact
ball bearing. The balancing line is returned to the suction
casing or in the upstream vessel. Standard suction casing
construction is with axial or radial inlet nozzles.
A mechanical shaft seal is located on the drive side only. It
can consist of a packed gland (cooled or uncooled, with
external flushing connection), (cooled or uncooled) singleacting mechanical seal or (uncooled) double-acting
mechanical seal.
The pump rotor is supported on the drive side by greaselubricated anti-friction bearings and on the suction side by a
self-adjusting sleeve bearing lubricated by the pumped
liquid.
The pump is normally driven from the discharge side. As
option the pump can be driven from the suction side in
which case an antifriction inboard/outboard bearing is
provided.
The casing components are sealed by O-rings. The pump
casings are held together by external tie rods. The pump
feet are mounted to the suction and discharge casings in
such a manner that the suction casing (for suction casings
with radial branch) and discharge casing can be swung to
suit the installation conditions.
All pump sizes can be provided with one or more dummy
stages, if required.
Waterworks, and water supply
Boiler feed
Pressure boosting
Irrigation
High pressure cleaning
Heating
Condensate systems
Reverse osmosis
Chemical and Process
and many more ...
Technical Data
Flowrate
Head
Speed
Temperature
Pressure Rating
Shaft seal
Direction of rotation
max. 450 m/h
max. 630 m
max. 3600 rpm
-10 to +180C *
max. 63 bar
- packed gland
- mechanical seal
counter-clockwise, when
viewed from discharge side
* 200C as special design for example pump feet are
mounted concentric in accordance to ISO 9905
133.23301.58.01 E
Options
Special materials
Monitoring Systems
PUMP TECHNOLOGY SIHImulti
MSL, MSM
05/2015
SIHImulti
MSM
MSL
Suction Impeller
First stage impeller ensures reliable
operation with low NPSH conditions.
Suction Position
Discharge Position
Adaptable design allows for either radial or
axial suction.
Adaptable design allows different
radial positions to be selected.
Product Lubricated Sleeve Bearing
Modular Design
Self-aligning bearing for higher reliability
Modular geometry of impellers/diffusers permits
optimal hydraulic design matching all duty
conditions.
SIHImulti
New Design of Balance Drum System
This new, patented design combines a balance drum with a
self-adjusting throttling device. The benefits include:
greatly reduced re-circulation flow in the balance line
same balance drum system for different number of stages
high efficiency, lower power consumption
lesser wear rate as this system does not rely on tight,
wear-sensitive clearances to control the re-circulation flow
Shaft Sealing
uncooled and cooled single-acting mechanical seal
uncooled double acting mechanical seal
uncooled or cooled packed gland
more ... for less ...
Reduced life-cycle cost
- Enhanced efficiency with the balance drum system
- Only one shaft seal
- Lower power consumption
- High reliability
Ease of maintenance
- Simple dismantling and assembly
Minimised wear
- Reduced usage of spare parts
Global service network
- Established local Service Centres around the world
SIHImulti
Range Coverage 50 Hz
n = 1450 rpm
MSM
MSL
n = 2950 rpm
MSM
MSL
SIHImulti
Range Coverage 60 Hz
n = 1750 rpm
MSM
MSL
n = 3550 rpm
MSM
MSL
SIHImulti
Nozzle Position (viewed from drive end)
Discharge Casing
radial horizontal left
radial top
radial horizontal right
every combination of suction and discharge casing is possible
Suction casing
axial
radial horizontal left
radial top
radial horizontal right
Flange Dimensions
ISO/EN/DIN
Pump Size
Nominal Size DN (mm)
suction side
axial
radial
discharge
side
032
80
50
32
050
100
80
50
065
125
100
65
100
150
125
100
125
200
150
125
150
200
200
150
ANSI
Pump size
Nominal Size DN (inch)
suction side
axial
radial
discharge
side
032
050
065
100
125
150
Flange Shape/Nominal Pressure PN
Casing Material
Cast Iron, Ductile Iron
Chrome Steel, Stainless Steel
suction side
discharge side
suction side
discharge side
DIN EN 1092 - 2,
PN 16, PN 25
DIN EN 1092 - 2,
PN 40
DIN 2546,
PN 63
DIN EN 1092 -2,
PN 16, PN 25,
DIN 2543,
PN 16
DIN 2544
PN 25
DIN 2545,
PN 40
DIN 2546,
PN 63
Flange Shape/Nominal Pressure PN
Casing Material
Cast Iron, Ductile Iron
Chrome Steel, Stainless Steel
suction side
discharge side
suction side
discharge side
ANSI B 16.1,
250 FF
ANSI B 16.1,
250 RF
ANSI B 16.5,
300 RF
ANSI B 16.5,
300 RF, 600 RF
SIHImulti
Shaft Sealing
Mechanical seal arrangement
uncooled, balanced
cooled, balanced
uncooled, unbalanced
uncooled, double back-to-back
uncooled, balanced STERLINGGNZ seal
Packed gland arrangement
uncooled
with jacket-cooling
with external flushing
SIHImulti
Sectional Drawing MSL, MSM with axial Inlet
Size 032 and 050
Size 065 and 100
SIHImulti
Sectional Drawing MSL, MSM with axial Inlet
Size 125
Size 150
SIHImulti
Sectional Drawing MSL, MSM with radial Inlet
Size 032 and 050
Size 065 and 100
10
SIHImulti
Sectional Drawing MSL, MSM with radial Inlet
Size 125
Size 150
11
SIHImulti
Sectional Drawing MSL, MSM with radial Inlet (drive on suction side)
Size 032 and 050
Size 065 and 100
12
SIHImulti
Sectional Drawing MSL, MSM with radial Inlet (drive on suction side)
Size 125
Size 150
13
SIHImulti
Material Design
Type MSL
Pos.
Item
Material of Construction
OR
106
Suction Casing
107
Discharge Casing
108
Stage Casing
230
Impeller
OS
OV
OU
1R
SC
GG-25
GGG-40
EN-GJL 250
EN-JS 1030
GG-25
GGG-40
EN-GJL 250
EN-JS 1030
GG-25
GGG-40
EN-GJL 250
EN-JS 1030
GG-25
Bronze
GG-25
EN-GJL-HB 195
2.1050
EN-GJL-HB 195
231
Suction Impeller
171
Diffuser
210
Shaft
524
Shaft Protection
Sleeve
523
Shaft Sleeve
603.1
603.2
Balance Drum
System
1.4122
542.1
Throttle Bush
1.4021
542.2
Throttle Bush
1.4088
433
Mechanical Seal
various Material Options
461
Packed Gland
various Material Options
GG-25
4R
1.4408
1.4408
1.4408
1.4408
GG-25
EN-GJL-HB 195
1.4409
EN-GJL-HB 195
GG-25
Bronze
GG-25
EN-GJL-HB 195
2.1050
EN-GJL-HB 195
1.4408
1.4408
1.4408
1.4021
1.4462
1.4122
1.4460
1.4571
1.4460
1.4462
Type MSM
Pos.
Item
0X
106
Suction Casing
107
Discharge Casing
108
Stage Casing
230
Impeller
SA
1S
1V
Material of Construction
1R
TA
TB
GG-25
GGG-40
GG-25
EN-GJL 250
EN-JS 1030
EN-GJL 250
171
Diffuser
TF
1.4008
1.4008
GGG-40
EN-JS 1030
Suction Impeller
TE
GGG-40
EN-JS 1030
231
TD
1.4008
GG-25
Bronze
GG-25
EN-GJL-HB 195
2.1050
EN-GJL-HB 195
GG-25
EN-GJL-HB
195
GG-25
EN-GJL-HB 195
1.4408
1.4408
GG-25
Bronze
GG-25
EN-GJL-HB 195
2.1050
EN-GJL-HB 195
210
Shaft
524
Shaft Protection
Sleeve
523
Shaft Sleeve
603.1
603.2
Balance Drum
System
1.4122
542.1
Throttle Bush
1.4021
542.2
Throttle Bush
1.4088
433
Mechanical Seal
various Material Options
461
Packed Gland
various Material Options
1.4021
1.4122
1.4571
14
1.4409
GG-25
EN-GJL-HB
195
1.4408
1.4408
SIHImulti
Operating Limits
Allowable Casing Pressure, Test Pressure
Type MSL
max. allowable Pressure (bar)
as a function of Liquid Temperature
Size
material of construction
Cast Iron
-10C up to
120 C
032
up to
150
Test
Pressure
1)
(bar)
Ductile Iron
< 140C
< 180 C
- 40C up to
120C
Stainless Steel
< 180C
< 20C up to
100C
< 140 C
< 180C
16
40
15
38
14
34
16
40
15
37
13
32
12
30
11
28
21
52
Type MSM
max. allowable Pressure (bar)
as a function of Liquid Temperature
Size
material of construction
Ductile Iron
Cast Iron
-10C up to
120 C
032
up to
150
1)
< 140C
Test
Pressure
(bar)
1)
< 180 C
- 10C up to
120C
< 140C
Stainless Steel
< 180C
-40C up to
120 C
< 140C
< 180C
16
63
15
58
14
56
16
63
15
62,5
14
60
16
63
15,7
62,5
15,5
60
21
82
consider mechanical seal pressure/temperature
S = suction casing, D = discharge casing
Max. Speed and Number of Stages
Type MSL
Size
032
Type MSM
Hydraulic
A
B
050
065
A, B
A, C
B, D
100
A, C
B, D
125
A, C
B, D
150
A, C
B, D
max. Speed
rpm
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450
1750
2950
3550
1450
1750
2950
3550
1450
1750
1450
1750
max. Number of
Stages
15
13
9
14
12
8
15
8
6
12
5
3
13
6
4
10
3
2
12
4
3
11
8
3
2
12
10
3
2
7
5
9
6
Size
032
Hydraulic
A
B
050
065
A, B
A, C
B, D
100
A, C
B, D
125
A, C
B, D
150
A, C
B, D
15
max. Speed
rpm
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450/1750
2950
3550
1450
1750
2950
3550
1450
1750
2950
3550
1450
1750
1450
1750
max. Number
of Stages
18
18
13
18
18
13
16
13
9
13
8
5
16
10
7
16
5
3
16
6
4
12
12
4
3
12
12
5
4
10
8
10
9
SIHImulti
Dimensional Drawing MSL with axial Inlet
Dimensions in mm, casing tolerance per DIN 1686/GTB 17 to be applied on dimensions of unmachined parts
Size
Pump dimensions
Feet dimensions
DN2 DN1
032
050
065
100
125
150
032
050
065
100
125
150
Size
1)
080
100
125
150
150
200
TS
TD
h1
h2
m2
m3
n1
n2
d2
l6
d11)
38
37
24
36
39
33
51,5
39
165
185
230
285
320
365
175
200
250
320
365
450
70
70
88
88
97
115
20
20
25
25
30
30
30
30
35
35
40
70
45
45
60
60
75
110
335
335
380
380
410
490
300
300
320
320
350
410
14
14
19
19
24
30
380
385
490
485
609
660
28
28
40
40
70
55
f
410
415
510
520
649
660
032
050
Stages
m4
2
3
4
5
6
7
8
9
10
11
12
13
14
15
150
195
240
285
330
375
420
465
510
555
600
645
690
735
120
165
210
255
300
345
390
435
480
525
570
615
660
705
175
230
285
340
395
450
505
560
615
670
725
780
835
890
m4
065
a1
135 260
190 330
245 400
300 470
355 540
410 610
465 680
520 750
575 820
630 890
685 960
740 1030
795
850
m4
100
a1
125
m4
180 305 225
250 390 310
320 475 395
390 560 480
460 645 565
530 730 650
600 815 735
670 900 820
740 985 905
810 1070 990
880 1155 1075
950 1240 1160
150
m4
m4
380
490
600
710
820
930
1040
1150
1260
1370
1480
340
450
560
670
780
890
1000
1110
1220
1330
1440
380
505
630
755
880
1005
1130
1255
270
395
520
645
770
895
1020
1145
k6 - tolerance fit
16
Shaft end
l1
60
31 8
60
31 8
110 43 12
110 43 12
166 74,5 20
167 59 16
SIHImulti
Dimensional Drawing MSL mit radial Inlet
Dimensions in mm, casing tolerance per DIN 1686/GTB 17 to be applied on dimensions of unmachined parts
Size
Pump dimensions
Feet dimensions
DN2 DN1
032
050
065
100
125
150
032
050
065
100
125
150
Size
1)
2)
050
080
100
125
150
200
TS
410
415
510
520
649
660
032
TD
h1
23
24 165
32
36 185
36
39 230
35
33 285
36,5 51,5 320
41
39 365
050
h2
m2
m3
n1
n2
d2
l6
d11)
175
200
250
320
365
450
70
70
88
88
97
115
20
20
25
25
30
30
30
30
35
35
40
70
45
45
60
60
75
110
335
335
380
380
410
490
300
300
320
320
350
410
14
14
19
19
24
30
380
385
490
485
609
660
28
28
40
40
70
55
065
100
125
150
Stages
m4
m4
m4
m4
m4
m4
22)
115
120
155
135
215
180
265
225
295
375
325
325
3
4
5
6
7
8
9
10
11
12
13
14
15
160
205
250
295
340
385
430
475
520
565
610
655
700
165
210
255
300
345
390
435
480
525
570
615
660
705
210
265
320
375
430
485
540
595
650
705
760
815
870
190
245
300
355
410
465
520
575
630
685
740
795
850
285
355
425
495
565
635
705
775
845
915
985
250 350 310
320 435 395
390 520 480
460 605 565
530 690 650
600 775 735
670 860 820
740 945 905
810 1030 990
880 1115 1075
950
405
515
625
735
845
955
1065
1175
1285
1395
485
595
705
815
925
1035
1145
1255
1365
1475
450 450
575 575
700 700
825 825
950 950
1075 1075
1200 1200
k6 - tolerance fit
Suction casing radial top only possible with 3 or more stages.
17
Shaft end
l1
60
31
8
60
31
8
110 43 12
110 43 12
166 74,5 20
167 59 16
SIHImulti
Dimensional Drawing MSM with axial Inlet
Dimensions in mm, casing tolerance per DIN 1686/GTB 17 to be applied on dimensions of unmachined parts
Size
Pump dimensions
Feet dimensions
DN2 DN1
032
050
065
100
125
150
032
050
065
100
125
150
Size
1)
080
100
125
150
150
200
TS
TD
h1
h2
m2
m3
n1
n2
d2
l6
d11)
38
37
24
36
39
33
51,5
39
165
185
230
285
320
365
175
200
250
320
365
450
70
70
88
88
97
115
20
20
25
25
30
30
30
30
35
35
40
70
45
45
60
60
75
110
335
335
380
380
410
490
300
300
320
320
350
410
14
14
19
19
24
30
380
385
490
485
609
660
28
28
40
40
70
55
f
410
415
510
520
649
660
032
050
065
100
125
150
Stages
m4
m4
a1
m4
a1
m4
m4
m4
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
150
195
240
285
330
375
420
465
510
555
600
645
690
735
780
825
870
120
165
210
255
300
345
390
435
480
525
570
615
660
705
750
795
840
175
230
285
340
395
450
505
560
615
670
725
780
835
890
945
135
190
245
300
355
410
465
520
575
630
685
740
795
850
905
260
330
400
470
540
610
680
750
820
890
960
1030
1100
1170
1240
180
250
320
390
460
530
600
670
740
810
880
950
1020
1090
1160
305
390
475
560
645
730
815
900
985
1070
1155
1240
1325
1410
1495
225
310
395
480
565
650
735
820
905
990
1075
1160
1245
1330
1415
380
490
600
710
820
930
1040
1150
1260
1370
1480
340
450
560
670
780
890
1000
1110
1220
1330
1440
380
505
630
755
880
1005
1130
1255
1380
270
395
520
645
770
895
1020
1145
1270
k6 - tolerance fit
18
Shaft end
l1
60
31 8
60
31 8
110 43 12
110 43 12
166 74,5 20
167 59 16
SIHImulti
Dimensional Drawing MSM with radial Inlet
Dimensions in mm, casing tolerance per DIN 1686/GTB 17 to be applied on dimensions of unmachined parts
Size
Pump dimensions
Feet dimensions
DN2 DN1
032
050
065
100
125
150
032
050
065
100
125
150
Size
1)
2)
050
080
100
125
200
200
TS
410
415
510
520
649
660
032
TD
h1
23
24 165
32
36 185
36
39 230
35
33 285
36,5 51,5 320
41
39 365
050
Shaft end
1)
h2
m2
m3
n1
n2
d2
l6
d1
175
200
250
320
365
450
70
70
88
88
97
115
20
20
25
25
30
30
30
30
35
35
40
70
45
45
60
60
75
110
335
335
380
380
410
490
300
300
320
320
350
410
14
14
19
19
24
30
380
385
490
485
609
660
28
28
40
40
70
55
065
100
125
150
Stages
m4
m4
m4
m4
m4
m4
22)
115
120
155
135
215
180
265
225
295
375
325
325
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
160
205
250
295
340
385
430
475
520
565
610
655
700
745
790
835
165
210
255
300
345
390
435
480
525
570
615
660
705
750
795
840
210
265
320
375
430
485
540
595
650
705
760
815
870
925
190 285 250 350
245 355 320 435
300 425 390 520
355 495 460 605
410 565 530 690
465 635 600 775
520 705 670 860
575 775 740 945
630 845 810 1030
685 915 880 1115
740 985 950 1200
795 1055 1020 1285
850 1125 1090 1370
905 1195 1160 1455
310
395
480
565
650
735
820
905
990
1075
1160
1245
1330
1415
405
515
625
735
845
955
1065
1175
1285
1395
485
595
705
815
925
1035
1145
1255
1365
1475
450
575
700
825
950
1075
1200
1325
1450
1575
450
575
700
825
950
1075
1200
1325
1450
1575
k6 - tolerance fit
Suction casing radial top only possible with 3 and more stages.
19
l1
60
31
8
60
31
8
110 43 12
110 43 12
166 74,5 20
167 59 16
SIHImulti
Dimensional Drawing MSL and MSM with radial Inlet (drive on suction side)
Dimensions in mm, casing tolerance per DIN 1686/GTB 17 to be applied on dimensions of unmachined parts
Size
Pump dimensions
Feet dimensions
DN2 DN1
032
050
065
100
1253)
1503)
032
050
065
100
125
150
Size
2)
3)
f1
350
355
397
410
483
493
032
TS
m4
22)
115
160
205
250
295
340
385
430
475
520
565
610
655
700
745
790
835
120
165
210
255
300
345
390
435
480
525
570
615
660
705
750
795
840
155
210
265
320
375
430
485
540
595
650
705
760
815
870
925
TD
h1
390 23
24 165
410 32
36 185
504 36
39 230
501 35
33 365
644 36,5 51,5 320
655 41
39 365
050
Stages
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1)
050
080
100
125
150
200
m4
065
e
m4
h2
m2
m3
n1
n2
d2
l4
d1
175
200
250
450
365
450
70
70
88
88
97
115
20
20
25
25
30
30
30
30
35
35
40
40
45
45
60
110
75
110
335
335
380
380
410
490
300
300
320
320
350
410
14
14
19
19
24
30
415
460
559
471
604
655
28
28
40
40
70
55
100
e
135 215 180 265
190 285 250 350
245 355 320 435
300 425 390 520
355 495 460 605
410 565 530 690
465 635 600 775
520 705 670 860
575 775 740 945
630 845 810 1030
685 915 880 1115
740 985 950 1200
795 1055 1020 1285
850 1125 1090 1370
905 1195 1160 1455
Shaft end
1)
125
m4
m4
330
415
500
585
670
755
840
925
1010
1095
1180
1265
1350
1435
1520
295
405
515
625
735
845
955
1065
1175
1285
1395
375
485
595
705
815
925
1035
1145
1255
1365
1475
k6 - tolerance fit
Suction casing radial top only possible with 3 and more stages.
with oel lubrication
20
150
e
m4
325 325
450 450
575 575
700 700
825 825
950 950
1075 1075
1200 1200
1325 1325
l1
60
31
8
60
31
8
110 43 12
113 43 12
166 74,5 20
167 59 16
SIHImulti
Connections
MSL with axial Inlet (Size 032 up to 100)
Pos.
MSL with radial Inlet (Size 032 up to 100)
Connection
Size
Dimension
032
065
050
100
I 1)
Pressure gauge
G1/2
G1/2
II 1)
Pressure gauge
G1/2
G1/2
III 1)
Vent
G1/4
G1/4
VII 1) Drain
G1/4
G1/2
IX 1)
Drain
G3/8
G3/4
Xa
Flushing connection
G1/4
G1/4
XIa
Cooling inlet seal chamber
G3/8
G1/2
XIb
Cooling outlet seal chamber
G3/8
G1/2
XII
Connection for circulation
G1/4
G1/4
XX
Grease luibrication
M6
M6
XXX
Thrust impulse measuring
possible
1) tapped
and plugged
MSM with axial Inlet (Size 032 up to 100)
Pos.
MSM with radial Inlet (Size 032 up to 100)
Connection
I 1)
Pressure Gauge
G1/2
G1/2
II 1)
Pressure Gauge
G1/2
G1/2
III 1)
Vent
G1/4
G1/4
VII 1) Drain
G1/4
G1/2
IX 1)
Drain
G3/8
G3/4
XIa
Cooling Inlet - seal chamber
G3/8
G1/2
XIb
Cooling Outlet - seal chamber
G3/8
G1/2
XII
Connection for Circulation
G1/4
G1/4
XX
Grease Luibrication
M6
M6
XXX
Thrust Impulse Measuring
possible
1) tapped
21
Size
Dimension
032
065
050
100
and plugged
SIHImulti
Connections
MSL/MSM with axial Inlet (Size 125 and 150)
Pos.
MSL/MSM with radial Inlet (Size 125 and 150)
MSL/MSM with drive end on suction side (Size 125 and 150)
Connection
I 1)
Pressure gauge
G1/2
G1/2
IIa 1)
Pressure gauge
G1/2
G1/2
IIIa
Vent mechanical seal
G1/2
G1/2
IIIb
Vent bearing
G1/2
G1/2
VII 1) Drain
G3/4
G3/4
IX 1)
Leck outlet
G1/2
G1/2
XIa
Cooling inlet seal
chamber
G1/2
G1/2
XIb
Cooling outlet seal
chamber
G1/2
G1/2
XIc
Cooling inlet bearing
Pipe
12
Pipe
12
XId
Cooling outlet bearing
Pipe
12
Pipe
12
XII
Connection for
circulation
G1/4
G1/4
XVI1) Oil outlet
G3/8
G3/8
XVIIa Oil level sight glas
G1/2
G1/2
XVIIb Constant level oiler
G1/4
G1/4
Connection for balancing
flow
G3/4
G3/4
Connection for
thermometer
G1/2
G1/2
XXII
XXIV1)
1) tapped
22
Size
Dimension
125
150
and plugged
SIHImulti
Material Description
Material-No.
Manufacturing standard
equivalent or comparable standard
DIN-material code
EN-designation
US-material code
ISO
Japan
old
new
ASTM-Standards
UNS
JIS
EN-JL 1040
GG-25
EN-GJL 250
EN-GJL 250
A 278 Class 30
EN-JL 2030
GG-25
EN-GJL-HB 195
EN-GJL-HB 195
A 48 Class 25/30
EN-JS 1030
GGG-40
EN-GJS-400-15
EN-GJS-400-15
A 536 Gr. 60-40-18
2.1050
G-CuSn 10
1.4008
G-X8CrNi 13
1.4088
G-X7CrNiMo 12-1
G-X7CrNiMo 12-1
G-X170Cr18
G-X170Cr18
1.4021
X20Cr 13
X20Cr 13
X20Cr 13
1.4122
X35CrMo 17
X39CrMo 17-1
X39CrMo 17-1
1.4408
G-X6CrNiMo 18 10
G-X5CrNiMo 19-11-2
G-X5CrNiMo
19-121-2
1.4460
X4CrNiMo 27 5 2
X3CrNiMoN 27-5-2
X3CrNiMoN 27-5-2
1.4462
X2CrNiMoN 22 5 3
X2CrNiMoN 22-5-3
1.4571
X6CrNiMoTi 17 12 2
X6CrNiMoTi 17-12-2
F 12401
185/Gr. 250
F 11701/F 12101 185/Gr. 300
components
G 5501, FC 300
Casing
G 5501, FC 250/300
Impeller/Diffuser
Casing
B 427 C91600
C 91600
A 217 Gr. CA 15
J 91 150
Impeller/Diffuser
G 5121, C1 SCS 1
Casing
Throttle Bush
A 276 Type 420
S 42 000
683-13-4
G 4303,Grl SUS 403
Shaft, Throttle Bush
Balance Drum,
Shaft Sleeve
A 351, 743, 744 CF 8M
J 92 800
X2CrNiMoN 22-5-3
A 276-S 31803
S 31 803
X6CrNiMoTi 17-12-2
193 Gr. B 8 M
S 31 600
683-13-9
SCS 14
Impeller/Diffuser,
Casing
G 4303, Grl SUS 329
Shaft, Throttle Bush
G 4303, Grl SUS 316
Shaft Sleeve
Balance Drum
683-1-21
Materials are produced to EN/DIN specifications. For other equivalent or comparable standards are mentioned only for information.
ASTM
DIN
EN
ISO
UNS
American Society for Testing and Materials
Deutsches Institut fr Normung e.V.
European Standard
International Standardisation Organisation
Unified Numbering System (USA)
23
SIHImulti
HALBERG Maschinenbau GmbH
Halbergstr. 1, 67061 Ludwigshafen, Germany
Tel. +49 (0) 621 56 12 - 0
Fax +49 (0) 621 56 12 - 209
www.halberg.com
24
