NPTEL Syllabus
Process Integration - Video
course
COURSE OUTLINE
Process integration, a part of Process Intensification, is a fairly
new term that emerged in 80's and has been extensively used
NPTEL
in the 90's to describe certain systems oriented activities http://nptel.ac.in
related primarily to process design.
It has incorrectly been interpreted as Heat Integration by a lot of
people, probably caused by the fact that Heat Recovery
Chemical
studies inspired by Pinch Concept initiated the field and is still
core elements of Process Integration.
Engineering
It appears to be a rather dynamic field, with new method and
application areas emerging constantly.
The Process Integration is defined as "systematic and general Pre-requisites:
methods for designing integrated production systems, ranging
from individual processes to total sites, with special emphasis Knowledge of basic process
on the efficient use of energy and reducing environmental design of process equipment.
effects".
Coordinators:
This definition brings Process Integration very close to Process
Synthesis, which is another systems oriented technology. Dr. B. Mohanty
Process Integration and synthesis belongs to process systems Department of Chemical
engineering. EngineeringIIT Roorkee
Process Integration has evolved from a heat recovery
methodology in the 80's to become what a number of leading
industrial companies in 90's regarded as a "major strategic
design and planning technology".
With this technology, it is possible to significantly reduce the
operating cost of existing plants, while new processes often
can be designed with reduction in both investment cost and
operating cost.
Contents:
Introduction to process integration, role of thermodynamics in
process design, targeting of energy, area, number of units, and
cost, super targeting, concept of pinch technology and its
application.
Heat exchanger networks analysis, Maximum Energy
Recovery (MER) networks for multiple utilities and multiple
pinches, design of heat exchanger network.
Heat integrated distillation columns, evaporators, dryers, and
reactors.
Waste and waste water minimisation, flue gas emission
targeting, heat and power integration. Case studies.
COURSE DETAIL
S.No Topics No. of
Hours
1 Introduction to process Intensification and 2
Process Integration(PI).
Areas of application and techniques
available for PI, onion diagram.
2 Pinch Technology-an overview: 2
Introduction, Basic concepts, How it is
different from energy auditing, Roles of
thermodynamic laws, problems addressed
by Pinch Technology.
3 Key steps of Pinch Technology: 1
Concept of Tmin , Data Extraction,
Targeting, Designing, Optimization-
Supertargeting
4 Basic Elements of Pinch Technology: 2
Grid Diagram, Composite curve, Problem
Table Algorithm, Grand Composite Curve.
5 Targeting of Heat Exchanger Network: 4
Energy Targeting, Area Targeting, Number
of units targeting, Shell Targeting and Cost
targeting.
6 Designing of HEN: 10
1. Pinch Design Methods, Heuristic
rules, stream splitting, design of
maximum energy recovery(MER).
2. Use of multiple utilities and concept of
utility pinches, Design for multiple
utilities pinches, Concept of threshold
problems and design strategy.
3. Network evolution and evaluation-
identification of loops and paths, loop
breaking and path relaxation.
7 Design tools to achieve targets, Driving 2
force plot, remaining problem analysis,
diverse pinch concepts, MCp ratio
heuristics.
8 Targeting and designing of HENs with 3
different Tmin values, Variation of cost of
utility, fixed cost, TAC, number of shells and
total area with Tmin Capital-Energy trade-
offs.
1. Process modifications-Plus/Minus 9
principles, Heat Engines and
appropriate placement of heat
engines relative to pinch.
2. Heat pumps, Appropriate placement
of heat pumps relative to pinch.
3. Steam Rankin Cycle design, Gas
turbine cycle design, Integration of
Steam and Gas turbine with process.
4. Refrigeration systems, Stand alone
and integrated evaporators.
5. Heat integrations and proper
placement of Reactors for batch
Processes as well as continuous
processes.
9 Retrofit of distillation systems. 3
10 Case studies 2
Total 40
References:
1. Shenoy U. V.; "Heat Exchanger Network Synthesis", Gulf
Publishing company.
2. Smith R.; "Chemical Process Design", McGraw-Hill .
3. Linnhoff B., Townsend D. W., Boland D, Hewitt G. F.,
Thomas B. E. A., Guy A. R., and Marsland R. H.; "A User
Guide on Process Integration for the Efficient Uses of
Energy", Inst. Of Chemical Engineers .
A joint venture by IISc and IITs, funded by MHRD, Govt of India http://nptel.ac.in
