APEX UNIPARTS GROUP

KLUANG [HQ] | JOHOR BAHRU | KUALA LUMPUR | SABAH | SARAWAK | THAILAND | INDONESIA

PRODUCT CATALOG Edition 2017 - 2018

Your Key Partner in Palm Oil/Biogas/General Industrial Supplies

Page | 1
 KS SE3 – SEK / SEL SERIES
Back Pull Out End Suction Pump
~ Max. Capacity : 245 m3/hr
~ Max. Head : 102 m

KS SE3 – SES Series KS SR Series

Self-Priming Pump Centrifugal Pump
~ Max. Capacity : 400 m3/hr ~ Max. Capacity : 500 m3/hr
~ Max. Head : 100 m ~ Max. Head : 145 m

KS SG Series
Chemical Process Pump KS TO Series
~ Max. Capacity : 500 m3/hr Thermal Oil Pump
~ Max. Head : 90 m ~ Max. Temp. : 350 Deg C

OSP Oil Skimmer Pump

~ Max. Capacity : 5.5 m3/hr
~ Max. Head : 12.2 m

Mixed Flow Pump KS-MF Series

~ Max. Capacity : up to 900 m3/hr
~ Max. Head : 33 m

KDP Dosing Pump

~ Max. Capacity : VSP Vertical Sump Pump
Simplex – 30 l/hr ~ Max. Capacity : 180 m3/hr
Duplex – 60 l/hr ~ Max. Head : 42 m
~ Max. Pressure : 35kg/cm2

DP4 Diaphragm Pump

~ Max. Capacity : 6,000 gal/hr
~ Max. Head : 20 ft

KEWCRACKER KCM
~ Type : Vertical Feed
& Discharge Nut Cracker
~ Capacity : KCM 4T, 6 T, & 8T

Page | 2
 APC®
SPROCKETS
CONVEYOR CHAIN

Material :
Cast Steel (CS)

BENZLERS KEY FEATURES

 Dry Connection
PALM OIL CHAIN Motor Adaptor
~ Size : 4”, 6”, & 8” pitch  Prolonged Motor
~ Chain Type : Solid Pin, Hollow Pin, Life
Extended at every 2nd or 3rd outer link plates  Patented Motor
& solid pin combine with hollow pin at Adaptor
every 2nd or 3rd outer link plates.
~ Breaking : Min. 15,000lbf up to 100,000lbf Load

GEARBOXES

Series G
Series M
I/P Power : Up to 90 kw Digester Drive
Series G I/P Power : Up to 72 kw
O/P Power : Up to 11,000 Nm Series K
Screw Press Drive O/P Power : Up to 25,000 Nm I/P Power : up to 90 kw
I/P Power : Up to 138.70 kw
O/P Power : 12,300 Nm
O/P Power : Up to 72,000 Nm

Page | 3
 SIHI PUMPS

HEGA
APPLICATION: BOILER FEEDWATER PUMP CEHA
- Max. Capacity : 145 m3/hr APPLICATION: OIL TRANSFER PUMP
- Max. Head : 390 m - Max. Capacity : 35 m3/hr
- Max. Head : 354 m

LPHA/LPHC
LPHX APPLICATION: LIQUID RING
APPLICATION: LIQUID RING VACUUM PUMP
VACUUM PUMP - Max. Capacity : 700 m3/hr
- Max. Capacity : 700 m3/hr - Max. Operating Pressure : 1013 mbar
- Max. Operating Pressure : 1013 mbar

ULNC
APPLICATION: VACUUM DEARATOR PUMP
3
- Max. Capacity : 300 m /hr
- Max. Head : 95 m

MSL/MSC/MSM Series
MSL/MSC/MSM Series Axial
APPLICATION: BOILER FEEDWATER PUMP
Radial Horizontal Right
3
- Max. Capacity : 450 m /hr APPLICATION: BOILER FEEDWATER PUMP
- Max. Head : 630 m - Max. Capacity : 450 m3/hr
- Max. Head : 630 m

Page | 4
 KD Series Metering Pump
- Max. Capacity : 2,700 lit/hr
- Max. Pressure : 10 bar

SP Series
Solenoid Metering Pumps
- Max. Capacity : 12 lit/hr
- Max. Pressure : 16 bar
HTCR Oil Drum Skimmer
WATER – FREE – OIL
- CAPACITY : up to 5m3/hr
- MAX. TEMP : 90°C KP Series
Plunger Type Metering
POLY MINIMAX Oil Drum Skimmer Pumps
WATER – FREE – OIL - Max. Capacity : 180 lit/hr
- CAPACITY : up to 5m3/hr - Max. Pressure : 225 bar
- MAX. TEMP : 60°C

AX / KS Series
Metering Pump
- Max. Capacity : 62 lit/hr
- Max. Pressure : 15bar

Vacuum Oil Dryer

- Capacity : 12 mt/hr or 15 mt/hr
- Operation Temp. : 85°C

Sand Cyclone Desanding

System (Module Unit)
- Model : AP206 – 30M
(Single)
- Model : AP206T – 30M
(Double)

Page | 5
APEX MIXERTECH®
Submersible Mixer for Anaerobic Pond
~ Motor Power (Kw) : 5Kw / 7.5Kw / 11Kw
~ Speed : 480 rpm
~ Liquid Temp. (Max) : 40°C
~ Flow Max : 70 M at Velocity = 0.1 m/s
~ Material : Hot Dip Galvanic Iron (HDGI) structure, SS304
for Motor Casing, Propeller, Shaft & Jet Ring
~ c/w Control Panel & Pontoon

BEFORE mixing AFTER 3 months mixing

APEX MIXERTECH®
Low Speed Surface Aerators

Model : AJ 5.5 / AJ 7.5 / AJ 11 / AJ 15

~ IP55 Flange Mount Motor : 5.5Kw / 7.5Kw / 11Kw / 15Kw

~ Gear Motor : BENZLERS or equivalent
~ Shaft : Hot Dip Galvanized Steel
~ Jacking Plate : High Tensile Steel
~ Float & Rotor : Fiberglass-reinforced polyester (FRP)
and filled with PU expanded foam

Page | 6
 AIROMATIC® MANUAL
OVERIDE
~ High Performance Butterfly Valve
~ Type : Wafer, Lug, Flange, Buttweld
~ Working Pressure : ANSI 150/300/600
~ Working Temp : -100°C ~ +650°C

AIROMATIC® SOLENOID
VALVE

/ HQ
~ Electric Actuator
/ AIROMATIC®
~ Control Power Supply :
~ Pneumatic Actuator YTC POSITIONER
220VAC/1ph/50hz/60hz, ±10%
~ Type : Single & Double Acting ~ Built – In Thermal Protection
~ Working Temp. : -20°C ~+ 80°C
~ Mounting : ISO 5211, Namur Std.~
Working Temp. : 100oC ~ +
650oC
YSK® VALVES

YSK® 1 PC BODY CF8 YSK® 2PC BODY BALL VALVE YSK® 3 PC BODY CF8 YSK® 3 PC BODY CF8 BALL VALVE
BALL VALVE
CAST IRON / SS304 BALL VALVE MOUNTING PAD
(DIAMOND TYPE)

YSK® WCB BLOW DOWN VALVE YSK® CAST IRON WAFER YSK® GLOBE VALVE YSK® CAST IRON
FLANGES DRILLED TO PN40 TYPE BUTTERFLY VALVE CAST IRON / CAST STEEL YSK® WCB SAFETY VALVE
SAFETY RELIEF VALVE
(PN16) (PN16 / PN40) (PN 16 / PN 40)

YSK® CAST IRON SINGLE DOOR

YSK® WCB
YSK® CAST IRON Y- STRAINER YSK® FORGED STEEL CHECK VALVE
DISCO CHECK VALVE PN 40
FLANGED END GLOBE VALVE (WAFER TYPE)
(WAFER TYPE)
(PN 16)

Page | 7
 RANGE OF FLOWMETERS

APPLICATION : OIL DESPATCH / CRUDE APPLICATION : EFFLUENT / LIQUID

PALM OIL / EDIBLE OIL YSK® - ELECTROMAGNETIC FLOWMETER
YSK® OVAL TYPE & DOUBLE ROTATOR C/W USA PHILEMON CONVERTER
TYPE FLOWMETER c/w STRAINER or T-Pot (Electric & Battery Type)
(Totalizer and Reset Counter)

APPLICATION : COLD WATER

KENT HELIX 4000 FLOWMETER
APPLICATION :
APPLICATION : LIQUIDS / PASTES / PALM OIL / SLUDGE WATER
YSK® VA FLOWMETER
SULLAGES / BULK SOLIDS
Type: Vertical / Horizontal
OPEN CHANNEL FLOWMETER
Model : M FMU40

APPLICATION :
VIRTUALLY ALL LIQUIDS APPLICATION : FOOD INDUSTRY /
YSK® CLAMP ON TYPE FLOWMETER PKO (LIQUID) / ETC
Measure Range : 2” ~ 28”
YSK® CORIOLIS MASS FLOWMETER

APPLICATION : DIESEL
APPLICATION :
PIUSI FLOWMETER
CONDUCTIVE LIQUID / WATER
PADDLE WHEEL FLOWMETER Model : K33 & K44

Page | 8
MIXERTECH®
Side Entry Mixer
- SERIES 5000
- Capacity : 500 mt – 5,000 mt Tank
- Ideal for Palm Oil related Industries

MMP®
Magnet & Ferrous Trap
~ Type : Plate, Lifting, Feeder, Conveyor
~ Power Pulse Controller

Vibratory Feeder (USA)

~ Capacity : 5 to 12 tons

VIBROSIEVE®
Screen Separator
~ Size : 48” & 60”
~ Single Deck & Double Deck
~ Model : VSC 1200, VSC 1500
Level Switch (Switzerland)
~ Model/Type : A 01041 (Side Mounted)
: A 01140 (Vertical Mounted)
~ Operating Temp. : 0 – 300oC
~ Rod Length : 1.5m or 3m
~ Application :
A 01041 (Side Mounted) - For High or Low Alarm duties
A 01140 (Vertical Mounted) - For limit/alarm function or pump control

Page | 9
 LIFE ENCHANCEMENT PRODUCTS

APPLICATION : BOILER STATION

APPLICATION : BOILER STATION
APPLICATION : FFB, SFB, BOILER ASH, APEX DIAMOND™ CONE
APEX ZICRON CONE
FIBER CONVEYOR AND OTHER Hardness: 70 HRC (200% harder than others)
Heat Resistance: Up to 1,400 °C
CONVEYOR STATION Max. Temperature: 500 °C
Weight: 24 Kg
APEX DIAMOND™ PLATE Weight: 23 Kg
Hardness: 55 HRC
Size: 2” for 4” chains
Size: 2 ½’’ for 6” chains

APPLICATION : AUSTENITIC FERRITIC ELECTRODE

APEX DIAMOND™ FOR HIGH STRENGTH & CRACK RESISTANCE
CLADDED WORM SCREW
ME – 22 ELECTRODES
Running Hours :
Assurance of extra ±400 Hr

APPLICATION : APPLICATION :
FERRO NICKEL ELECTRODE FOR WELDING ALL GRADES QUALITY TOUGH ABRASIVE RESISTANT
OF CAST IRON FOR MACHINABLE DEPOSIT OVERLAY ELECTRODE
ME – 33 ELECTRODES ME – 57 ELECTRODES

Size (mm): 4.00

Page | 10
 LIFE ENCHANCEMENT PRODUCTS

APPLICATION : DEAERATORS / HEAT

EXHANGERS / WATER BOXES
CERAMIC COAT
Temp. Resistance: 160 °C
Hardness: 90D
WATER SOFTENER OVERHEAD WATER TANK
CORROSION

APPLICATION : ERODED AND CORRODED

VALVES, TANKS, ETC.
APPLICATION : BOILERS, CHIMNEY,
CERAMIC PUTTY
HIGH TEMP. EXHAUST, STEAM
Temp. Resistance: 160 °C
THERMAL COAT
Hardness: 90D

ZICRON
1400ºC 6 MONTHS AFTER
APPLICATION ZICRON 1400ºC
APPLICATION

APPLICATION : WORN OUT SHAFTS, BEARING

HOUSING. TANKS LEAKS AND CRACKS
M APPLICATION : BOILER CHIMNEY,
TITANIUM PUTTY THERMAL POWER PLANTS, HEAT
Temp. Resistance: 170 °C EXCHANGERS, BOILERS, BOILER FURNACES
Hardness: 88D ZICRON 1400°C
Temp. Resistance: 1400 °C

APEX DIAMOND

APPLICATION : POWER PLANT, APPLICATION : OIL EXPELLER WORMS, SCREW

COAL MINING AND PALM OIL CONVEYORS, CEMENT DIE RINGS, ETC.
INDUCED DRAFT FAN MAILHARD BV
Hardness: 70 ~ 72 HRC

Page | 11
 HEADQUARTERS (KLUANG) :
APEX UNIPARTS SDN BHD.
26, Jalan 18 Industrial Estate, Taman Sri Kluang,
86000 Kluang, Johor, Malaysia
Tel : +607-772 4100 / 772 5200
Fax : +607-772 2900
Email : [email protected]

JOHOR BHARU : KUALA LUMPUR :

APEX UNIPARTS SDN BHD. APEX UNIPARTS (K.L) SDN BHD.
12, Jalan Undan 16, Taman Perling , 10, Jalan Anggerik Mokara 31/49, Kota Kemuning,
81200 Johor Bahru , Johor, Malaysia Seksyen 31, 40460 Shah Alam, Selangor, Malaysia
Tel : +607-772 4100 / 772 5200 Tel : +603-5122 5200
H/P : +6019-776 8100 Fax : +603-5122 2500
Email : [email protected] Email : [email protected]

SABAH : SARAWAK :
APEX UNIPARTS SDN BHD. APEX UNIPARTS SDN BHD.
Lot 89, MDLD 6997, 1st Floor, Bandar Sri Perdana, Sublot No. 18 of Parent Lot 277, Block 32, Kemena
Lorong 2, 91100 Lahad Datu, Sabah, Malaysia Land District, 97000 Bintulu, Sarawak, Malaysia
Tel : +6089-860 585 Tel : +6086-318 100
Fax : +6089-862 595 Fax : +6086-312 100
Email : [email protected] Email : [email protected]

THAILAND : INDONESIA :
(REPRESENTATIVE OFFICE) PT. APEX UNIPARTS INDONESIA
289/256 Rathpattana Rd., Saphansung, Pergudangan Multi Guna Daan Mogot,
Bangkok 10240 Green Sedayu Bizpark Daan Mogot,
Tel : +66 92 261 1073 Blok DM 16 No 58,
Email : [email protected] Jl. Daan Mogot Raya KM 18 Kel. Kalideres, Kec. Kalideres,
Jakarta Barat, 11840 Indonesia
[email protected]
HP: + 62 812 80 764 019
Email : [email protected]
[email protected]
Website : www.apexuniparts.com.my
Facebook : https://www.facebook.com/apexuniparts.com.my/

Your Key Partner in Palm Oil/Biogas/General Industrial Supplies

Page | 12