Scribd
Upload
744 views1 page

Solax Smart Meter Setup Guide

The document provides step-by-step instructions for connecting a Solax smart meter with a CT sensor to monitor the energy production of a photovoltaic system. The instructions include connecting the meter and CT sensor wires to the main electrical panel and inverter, preparing and crimping an RJ45 cable to connect the meter to the inverter, and enabling the limiter function on the inverter.

Uploaded by

Wynner Stone
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
744 views1 page

Solax Smart Meter Setup Guide

The document provides step-by-step instructions for connecting a Solax smart meter with a CT sensor to monitor the energy production of a photovoltaic system. The instructions include connecting the meter and CT sensor wires to the main electrical panel and inverter, preparing and crimping an RJ45 cable to connect the meter to the inverter, and enabling the limiter function on the inverter.

Uploaded by

Wynner Stone
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STEP BY STEP INSTRUCTION

(SOLAX SMART METER WITH CT SENSOR)

1. Connect terminal 1 to terminal 2. 2. Connect terminal 1,2 to Line side main breaker
Connect terminal 3 to terminal 4. Connect terminal 3 ,4 to Neutral side main breaker
(use AWG 10 cable) (use AWG 10 cable)

L N

Main Breaker

Load Side

3. Connect black ct-sensor wire to terminal 5. 4. Clamp CT sensor on main service cable. Arrow must be pointing outside the
Connect white ct-sensor wire to terminal 6. grid.

ct sensor clip here


arrow
pointing
outward
L N

load side

5. Prepare RJ45 cable 6. Crimp the end using standard RJ45


7. Plug to the inverter meter port
color code designation.

8. Screw the other end of the RJ45 cable 9. Set the limiter function of the inverter.
to the smart meter.
On the inverter main menu press enter
meter terminal 7: white-brown choose "settings"
meter terminal 8: brown password: 2014

Expot control: ENABLE


VALUE: 00000

You might also like