Scribd
Upload
110 views1 page

Welding Rods for Industrial Use

This document provides information on TIGFIL 70S-6 solid wire for gas tungsten arc welding of C-Mn steel. It can be used for a variety of applications including root pass pipe welding, thin sheet metal welding, and pressure vessel construction. The wire has a uniform copper coating and allows for a controllable weld pool. It meets various international and national standards and is suitable for welding in all positions when using argon as a shielding gas.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views1 page

Welding Rods for Industrial Use

This document provides information on TIGFIL 70S-6 solid wire for gas tungsten arc welding of C-Mn steel. It can be used for a variety of applications including root pass pipe welding, thin sheet metal welding, and pressure vessel construction. The wire has a uniform copper coating and allows for a controllable weld pool. It meets various international and national standards and is suitable for welding in all positions when using argon as a shielding gas.

Uploaded by

satnam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TIGFIL 70S-6 GTAW C-Mn Steel

C-Mn STEEL SOLID FILLER ROD

CLASSIFICATION : EN ISO 636-A AWS A/SFA 5.18 CSA W48 APPROVALS :


W 42 5 W3Si1 ER 70S-6 B-G 49A 3 C1 S6 CWB

KEY FEATURES :
• C-Mn steel filler rod • Controllable weld pool
• Uniform copper coating • Radiographic quality weld

WELDING POSITION : DCEN

Shielding Gas: Ar Gas Flow Rate, LPM : 8-15

TYPICAL APPLICATIONS :
• Root pass pipe welding • Application in high pressure piping for
• Thin sheet metal, Auto body shipbuilding, petro chemical and nuclear
• Farm implements, Steel casings power plant
• Collision repair, Pressure vessels

STORAGE / HANDLING :
Keep dry during storage and handling

CHEMICAL COMPOSITION OF BARE SOLID WIRE, Wt% :


C Mn Si S P Cu*
Specification 0.06-0.14 1.40-1.60 0.80-1.0 0.025 max 0.025 max 0.50 max
* Including Cu in the coating

MECHANICAL PROPERTIES OF ALL WELD METAL :


UTS, MPa YS at 0.2% offset, EL% CVN Impact at
Condition
MPa -50°C, J
Specification As Welded 500-640 420 min 22 min 27 min

PACKING DATA :
Ø x L, mm Primary Box, Kg No. of Primary Boxes Net Wt. of Carton, Kg
1.6 x 1000 5 4 20
2.0 x 1000 5 4 20
2.5 x 1000 5 4 20

PASSION FOR WELDING SINCE 1951 www.adorwelding.com

You might also like