PROGET Fire doors

“fire protection excellence,

flexibility custom-made“

www.ninz.it
 Features
PROGET Fire doors

THE FIRE DOOR IN A CLASS OF ITS OWN One-leaved doors available in the following classes:
fire doors
PROGET

EIREI
2
60 30
-REI -EI
Sm 30C52
120 REI 60
REI 60 REI 90
REI 90
“Indisputable quality”
-- Especially sturdy door for safe functioning over time
-- Ideal for application to uneven or weak walls
-- Fully isolated frame for true “dry wall installation”
-- Built to order for all kinds of requests
-- Fully galvanized door, including the “hidden” parts
-- Made of hot-galvanized sheet metal, “Sendzimir” pro-
cessed
-- Corrosion protection also provided along cut edges of
the metal sheets
-- Painted with epoxy-polyester thermoset powders in a
180 degrees (Celsius) oven
-- Substantial paint layer (70 microns plus)
-- Optimal corrosion resistance demonstrated by 500 hour
salt-fog test
-- Unaffected by severe climate changes, demonstrated by
2000 hours with +60° to -10° cycles at 75% humidity
-- Finishing with high-quality aesthetics
-- Orange skin anti-scratch structured paint
-- Customizable with wide selection of RAL colors
-- “Practicality of use”
-- Truly sturdy frame that facilitates anchoring to the wall
-- Suitable for all wall types
-- Different installation methods to choose from
-- Significantly reduced installation times
-- Type approvals for multiple installations to different
wall types
-- Ample size range
-- Wide variety of accessories
Two-leaved doors available in the following classes:
“Conformity to standards”
-- In-house Ninz R&D with specialized testing equipment EI230 EI
EI 60
REI
22
6030
- Sm30-EI
REI C52
90 REI 60
REI 60 REI 90
REI 90
-- Fire testing in accordance with UNI 9723 and EN 1634-1
-- Mechanical testing for the marking of accessories
-- marked door accessories studied and sized to meet
standard European requirements
-- Careful selection of materials and manufacturing methods
-- Strict product testing for conformity to declared techni-
cal standards
-- Absolute functional certainty over time
-- Doors “type approved” in compliance with M.D. 21
June 2004
-- Products delivered with the documentation required by
current regulations

“Manufacturing technology”
-- Manufacturing in modern and functional facilities
which employ the latest technologies to maintain high
quality levels and product uniformity
-- The entire production process - from raw materials to
painted and packaged products - takes place inside
Ninz’s own facilities, ensuring a 360 degree door control

Opening direction
Opening direction needs to be indicated while ordering

Left Left RightRight Left Left RightRight

2
Features
PROGET Fire doors

STANDARD ELEMENTS

fire doors
PROGET
which comprise Proget fire doors:

Door leaf
-- Made of “Sendzimir” processed hot-galvanized sheet
metal, press folded and electro welded
-- Perimetral rebate on 3 sides, flat at the bottom
-- Internally reinforced with hot-galvanized steel profiles
-- Heat-insulated treated mineral wool packing that is rig-
idly joined to the sheet metal
-- Internal stiffeners for overhead door closer and panic bar
-- Single thickness of 60 mm

Standard frame
-- Sturdy profile with a sizeable cross section
-- Made of “Sendzimir” processed hot-galvanized sheet
metal
-- Equipped with special assembly brackets
-- Grooves for thermo expansive sealing and rebate sealing
-- Standard installation via anchors for mortar fixing
-- Upon request installation via expansion screws or screws
onto the subframe
-- Lower spacer, mounting template
-- Rests on finished flooring without rebate
-- Strike plates in black plastic for lock bolt and safety bolts
-- Assembly required for doorframes
Thermo expansive sealing
-- Mounted on vertical doorframe profiles and central ver-
tical profiles (for two-leaved doors)
-- Mounted above and below the leaves depending on the
certification

Hinges
-- Nr. 2 three-wing hinges for each leaf
-- of which one ball-bearing hinge with screws for vertical
adjustment of the leaf, marked as per EN 1935, classi-
fied for up to 160 kg load, 200.000 cycles durability, suit-
able for fire door use
-- and one hinge with self-closing spring
Safety bolts
- Nr. 1 or 2 safety bolts applied on hinge side leaf edge

Locking mechanism
-- Reversible locking mechanism with bolt and central latch
for EI260, EI290 and REI 120 doors
-- Three locking point mechanism for one-leaved EI2120 doors
-- marked in conformity with EN 12209 standard
-- Insert with patent key, Euro profile cylinder ready

Handle
- Fire rated handle in black plastic with steel core
- Steel installation plate with cylinder hole
- Backplate in black plastic
- Fastener screws and patent key insert

3
 Features
PROGET Fire doors

INCLUDED ACCESSORIES
fire doors
PROGET

which comprise Proget fire doors:

Closing regulator
-- Standard two-leaved doors include an RC/STD closing
regulator to ensure the correct closing sequence of the
leaves, except those with environmental characteristics
for which the RC2 system is mandatory (to be ordered
with the door).
-- marking in conformity with EN 1158 standard
Locking mechanism for inactive leaf
-- “Flush-bolt” automatic locking of the inactive leaf
-- Lever control for unlocking
Upper coupling system for the inactive leaf
-- Inactive leaf lock activated device which inserts rod into
the upper strike box
-- Upper strike box in pierced steel with steel roller
Lower coupling system for the inactive leaf
-- Vertical rod with steel point which inserts into lower
strike box
-- Lower floor catch (floor-mounted bushing) made of
self-extinguishing black plastic with rebate stopper

Identification plate
-- Metal tag with door identification data, in accordance
with current regulations

Finishing
-- Standard painted with epoxy-polyester thermoset pow-
ders in a 180 degrees oven, orange skin, anti-scratch
finishing
-- Standard pastel turquoise color, lighter tone for the leaf
(NCS4020-B50G), darker tone for the frame (NCS5020-
B50G)

Standard packaging
-- Single leaf wrapped into stretchable polyethylene (PE)
film
-- Single packaging for each doorframe with stretchable
polyethylene (PE) film
-- Palletized on wooden pallets

Door weight class kg/m2 of wall opening

1 leaf EI260, REI 60 37
2 leaves EI260, REI 60 35
1 leaf EI2120, REI 120 42
2 leaves EI290, REI 120 40

NOTE
If the door ever needs to be repainted, follow the precise
instructions on the “Painting” section.

4
Features
PROGET Fire doors

INSTALLATION ONTO OTHER WALL TYPES

fire doors
PROGET
Other types of installation are possible, all of which have been
rigorously certified and approved
- Frame for dry wall installation with expansion screws
- Frame for dry wall installation with screws onto the subframe
- Block frame for in the reveal application
- Embracing frame for lightweight constructions installation

OPTIONAL ACCESSORIES
A wide variety of accessories and surface finishes are available
on request for maximum value enhancement of Proget doors to
your own specific needs. The proper accessories can help resolve:

Safety-related needs
- Doors for panic exits (see panic bars)
- Doors for emergency exits (see emergency exit handles)
- Open doors which must be closed in case of fire (see leaf
holding systems)

Installation and utilization needs

- Frame extensions
- Different kinds of floor mounted catches
- Roofing and drip steel-profile
- Special fastener screws
- Kick and protection plates in stainless steel
- Rectangular windows, standard dimensions or built to order
- Round windows
- One-leaved door with frame on four sides

Access-related control issues

- Electrically-activated lock mechanisms
- Electric handle mechanisms
- Magnetic blocking mechanisms

Performance enhancing
- Sealing
- Cylinders
- Door closers
- Special closing regulators
- Special handles

Customized finishing
- Select finishing from a wide variety of RAL colours
- NDD – Ninz Digital Decor, graphic images applied with
special ink jets and protected by a transparent topcoat.
Infinite varieties of customizable decorations in harmo-
ny with specific door settings
- Stainless steel handles
- Colored handles

Packaging for maximum protection

Sturdy wooden crates protect all doors and related acces-
sories
- For NDD decorated doors
- On construction sites
- During shipping abroad
- For special transport

NOTE
Details on the optional accessories may be found in the
following chapters of this brochure:
- Painting and NDD decorations
- Accessories for metal doors
- Emergency handles and panic bars

5
 Specific optional accessories
PROGET Fire doors

WINDOW WITH FIRE RATED GLASS

fire doors
PROGET

Upon request all one- and two-leaved fire doors may be

equipped with round or rectangular windows with fire
rated stratified glass and respective window frames fixed
with screws. The window frame carters are included for
round window and available as an optional accessory for
the rectangular one.

Limits prescribed by regulations

According to standards UNI 9723 and EN 1634-1, windows
may be smaller but not larger than the test sample size,
and the reverse holds true for the border strip around the
window which may be wider but not thinner.
The following limits correspond with these restrictions.

Borders, window position

“Border measurement“ refers to the distance from the
edge of the window to the wall opening of the door.

Elevation for round windows

NOTE
window size FM H position
For the rectangular windows the frame carters are an op-
Ø 300 minimum 2050 Y=1600 tional accessory
Ø 300 less than 2050 Y=FM H - 450
Ø 400 minimum 2150 Y=1600
Ø 400 from 2050 to 2149 Y=1550
Ø 400 less than 2050 Y=FM H - 500 Round window cross section
Elevation for rectangular windows 54 17
window dimensions L x H FM H position
300 x 400 minimum 2150 Z=1450
300 x 400 from 2050 to 2149 Z=1350
300 x 400 less than 2050 Z=FM H -700
400 x 600 minimum 2150 Z=1250
400 x 600 from 2050 to 2149 Z=1150
400 x 600 less than 2050 Z=FM H - 900 Border Window Ø Border
400 x 1200 minimum 2150 Z=650
400 x 1200 from 2050 to 2149 Z=550
400 x 1200 less than 2050 Z=FM H - 1500
Rectangular window cross section
50 15
b

a a
Y

Border Window LxH Border

NOTE ATTENTION
Position and measurements indicated above are those In case of external installation use windows designed for
standard. this purpose.
Different positions and measurements may be considered For special instructions and recommendations for glazed
as long as they respect the minimum “a” and “b” bor- fire-rated products, see the “Notices” section on the last
der strips and maximal measurements mentioned in the page of the present brochure.
certificate for the window. The window itself may not be
supplied separately except for replacements. It is always
advisable for doors with windows to be equipped with
door closers for controlled closing.

6
Specific optional accessories
PROGET Fire doors

EI WINDOW SPECIFICATIONS BASED

fire doors
PROGET
ON INSTALLATION METHOD

EI ame fram ons

e
ti
k f ing uc
s
oc ac tr
w wei rew

bl mbr cons
ns g
n

sc
ex fixi

e t
ith gh
lig ion

20
r
ta

0
26

29

21
pa
or

ht
model min./max. window border strip dimensions FM L (L1 + L2) x FM H

EI

EI
m
L x H a b
Ø 300 300 300 from 900 to 1340 x from 1950 to 2600

Ø 400 300 300 from 1000 to 1340 x from 1950 to 2600

Ø 300 300 300 from 900 to 1340 x from 1900 to 2640

Ø 400 300 300 from 1000 to 1340 x from 1900 to 2640

from 250 from 250

300 300 from 850 to 1340 x from 1950 to 2600
to 700 to 650

from 250 from 250

300 300 from 850 to 1340 x from 1950 to 2600
to 670 to 620

from 250 from 250

370 300 from 990 to 1340 x from 1900 to 2640
to 600 to 400
from 1250 ( 900 + 350) to 2540 (1270 + 1270) x
Ø 300 300 300
from 1775 to 2600
from 1350 (1000 + 350) to 2540 (1270 + 1270) x
Ø 400 300 300
from 1775 to 2600
from 1475 ( 900 + 575) to 2270 (1150 + 1120) x
Ø 300 300 300
from 1775 to 2300
from 1575 (1000 + 575) to 2270 (1150 + 1120) x
Ø 400 300 300
from 1775 to 2300
from 1800 ( 900 + 900) to 2540 (1270 + 1270) x
Ø 300 300 300
from 1775 to 2600
from 2000 (1000 + 1000) to 2540 (1270 + 1270) x
Ø 400 300 300
from 1775 to 2600
from 1800 ( 900 + 900) to 2270 (1150 + 1120) x
Ø 300 300 300
from 1775 to 2300
from 2000 (1000 + 1000) to 2270 (1150 + 1120) x
Ø 400 300 300
from 1775 to 2300
from 250 from 250 from 1200 ( 850 + 350) to 2540 (1270 + 1270) x
300 300
to 700 to 650 from 1775 to 2600

from 250 from 250 from 1200 ( 850 + 350) to 2540 (1270 + 1270) x
300 300
to 670 to 620 from 1775 to 2600

from 250 from 250 from 1425 ( 850 + 575) to 2270 (1150 + 1120) x
300 300
to 600 to 400 from 1775 to 2300

from 250 from 250 from 1700 ( 850 + 850) to 2540 (1270 + 1270) x
300 300
to 700 to 650 from 1775 to 2600

from 250 from 250 from 1700 ( 850 + 850) to 2540 (1270 + 1270) x
300 300
to 670 to 620 from 1775 to 2600

from 250 from 250 from 1700 ( 850 + 850) to 2270 (1150 + 1120) x
300 300
to 600 to 400 from 1775 to 2300

7
 Specific optional accessories
PROGET Fire doors

REI WINDOW SPECIFICATIONS

fire doors
PROGET

BASED ON INSTALLATION
METHOD

f h
s

e
em erb ew

RE cing wit
0 ram
ra g

r
n

sc

a d
br oar
su fixi

e
ion

20
m
r

ns
ta

I1
I6
t
pa
bf

as
or
model min./max. window border strip dimensions FM L (L1 + L2) x FM H

RE
pl
ex
m
L x H a b
from 900 to 1170 x from 1775 to 2275
Ø 300 300 300
from 1004 to 1340 x from 2050 to 2500
from 1000 to 1170 x from 1775 to 2275
Ø 400 300 300
from 1004 to 1340 x from 2050 to 2500
from 250 from 250
250 300 from 750 to 900 x from 1775 to 2000
to 400 to 600

from 250 from 250

300 300 from 850 to 1000 x from 1775 to 2150
to 400 to 600

from 250 from 250

360 300 from 970 to 1340 x from 1775 to 2670
to 620 to 400

from 250 from 250 from 850 to 1170 x from 1775 to 2275
300 300
to 564 to 443 from 1004 to 1340 x from 2050 to 2500

from 250 from 630 from 750 to 900 x from 1775 to 2000
(*) 250 300
to 400 to 1400 from 779 to 1037 x from 1803 to 2197

from 250 from 500 from 890 to 1162 x from 1775 to 2620
(*) 320 300
to 522 to 1460 from 997 to 1332 x from 2361 to 2670

from 1250 ( 900 + 350) to 2252 (1126 + 1126) x from 1775 to 2275**
Ø 300 300 300
from 1962 ( 996 + 966) to 2540 (1270 + 1270) x from 2050 to 2500**
from 1350 (1000 + 350) to 2252 (1126 + 1126) x from 1775 to 2275**
Ø 400 300 300
from 1966 (1000 + 966) to 2540 (1270 + 1270) x from 2050 to 2500**
from 1800 ( 900 + 900) to 2252 (1126 + 1126) x from 1775 to 2275**
Ø 300 300 300
from 1962 ( 996 + 966) to 2540 (1270 + 1270) x from 2050 to 2500**
from 2000 (1000 + 1000) to 2252 (1126 + 1126) x from 1775 to 2275**
Ø 400 300 300
from 2000 (1000 + 1000) to 2540 (1270 + 1270) x from 2050 to 2500**

from 250 from 250

300 300 from 1200 ( 850 + 350) to 2000 (1000 + 1000) x from 1775 to 2150**
to 400 to 600

from 250 from 250

300 300 from 1700 ( 850 + 850) to 2000 (1000 + 1000) x from 1775 to 2150**
to 400 to 600

from 250 from 250

325 300 from 1250 ( 900 + 350) to 2540 (1270 + 1270) x from 1775 to 2670**
to 620 to 400

from 250 from 250

325 300 from 1800 ( 900 + 900) to 2540 (1270 + 1270) x from 1775 to 2670**
to 620 to 400

from 250 from 250 from 1200 ( 850 + 350) to 2252 (1126 + 1126) x from 1775 to 2275**
300 300
to 564 to 443 from 1962 ( 996 + 966) to 2540 (1270 + 1270) x from 2050 to 2500**

from 250 from 250 from 1700 ( 850 + 850) to 2252 (1126 + 1126) x from 1775 to 2275**
300 300
to 564 to 443 from 1962 ( 996 + 966) to 2540 (1270 + 1270) x from 2050 to 2500**

from 250 from 630 from 1100 ( 750 + 350) to 1800 ( 900 + 900) x from 1775 to 2000
(*) 250 300
to 400 to 1400 from 1539 ( 772 + 767) to 2061 (1028 + 1033) x from 1803 to 2197

from 250 from 500 from 1240 ( 890 + 350) to 2315 (1155 + 1160) x from 1775 to 2620
(*) 320 300
to 515 to 1460 from 1975 ( 989 + 986) to 2540 (1268 + 1272) x from 2361 to 2670

NOTE
(*) Windows only possible for the minimum size of 0,25m2, (**) FM inactive leaf minimum without window with RC/STD
and only on one-leaved doors or the active leaf of two- =350mm. FM inactive leaf minimum without window but
leaved doors. with RC2=370mm.

8
Specific optional accessories
PROGET Fire doors

FRAME EXTENSIONS FOR PROGET DOORS

fire doors
PROGET
IM 1
Frame extension to be mounted in addition to the Proget
frame to serve as embracing frame made of “Sendzimir” Wall opening
processed hot-galvanized sheet metal and painted the
same color as the doorframe with epoxy-polyester pow-
ders. Profile on three sides, upper corners with 45 degree
Doorframe
joint, fixing with screws and plugs in groove (screws and
opening -3mm
plugs not included). 73
on each side

IM 3
Frame extension to be mounted in addition to the Proget
frame to serve as embracing frame, especially for EI290,
EI2120 with installation for expansion screws fixing. Made
of “Sendzimir” processed hot-galvanized sheet metal and
painted the same color as the doorframe with epoxy-pol- Wall opening
yester powders. Profile on three sides, upper corners with
45 degree joint, fixing with screws and plugs (screws and
plugs not included). Doorframe
opening -3mm
73
on each side

IM 4
Frame extension to be screwed to the Proget doorframe
acting as a wall cladding. Made of “Sendzimir” processed
hot-galvanized sheet metal painted the same color as
the doorframe with epoxy-polyester powders. Profile on
three sides, upper corners with 90 degree joint.
Complete with fastener screws. To mount the frame ex- Wall opening
tension, pre-drilled holes are available on the frame. Com-
bine with sealing to conceal the screw heads. Doorframe
opening -3mm
73
on each side

IM 5
Telescopic frame extension to be screwed to the Proget
doorframe acting as a wall cladding for expansion screw
fixing. Consists of two overlapping profiles with a 25mm
adjustable range. Made of “Sendzimir” processed hot-gal-
vanized sheet metal painted the same color as the door- Wall opening
frame with epoxy-polyester powders. Profile on three
sides, upper corners with 90 degree joint. Doorframe
Complete with fastener screws. To mount the frame ex- opening -3mm
tension, pre-drilled holes are available on the frame. Com- on each side 73
bine with sealing to conceal the screw heads.

FRAME ON FOUR SIDES

Upon request one-leaved Proget doors may be supplied

with frames on four sides and leaves with or without low-
er rebate. These type of doors are used mainly for techni-
cal rooms or shafts.
The frame on four sides is not available for the follow-
ing applications: doors installed onto escape routes, two-
leaved doors, doors with environmental characteristics, Leaf with lower rebate
application on lightweight constructions, in combination
with frame extensions.

ATTENTION
With the frame on four sides, the center of the handle will
be 15 mm higher than the standard position. For more de-
tails, see the page “Door cross section - Measurements”.

Leaf without lower rebate

9
 Specific optional accessories
PROGET Fire doors

THREE-POINT LOCKING MECHANISM

fire doors
PROGET

Mandatory for one-leaved EI2120 doors and upon request

for a more reliable closure of one- and two-leaved EI260
and two-leaved EI290 doors. In combination with double
M1 handle and cylinder. The lock is also available for anti-
panic and emergency push versions. Thus the three-point
locking mechanism can be combined with emergency
handles or with EXUS, TWIST, SLASH type BM panic bars
in conformity with marking.

Additional closure points

NOTE
Three point locking mechanism can be combined with M1,
M1C, M1X, M11 and M11X handles only.

STEEL FLOOR CATCH 50 14

Floor-mounted steel floor catch for two-leaved Proget

35
doors. Made of pierced and successively galvanized steel.
Includes rebate stop for the inactive leaf, the strike box
for insertion of the rod, Nr. 3 screws and Nr. 3 plugs.

51
To be used in place of the plastic floor catch for doors that

18
usually remain open and where carts and heavy equip-

26
ment pass on a regular basis.
22
Lower PROGET steel floor catch

RETREATING FLOOR CATCH „N626“

To be applied in combination with two-leaved PROGET

doors, which are usually to be kept open, in substitution
of the standard floor catch. The N626‘s advantage is the
embedding of the floor catch into the floor which is acti-
vated only by the closing of the inactive leaf. Thus when
the doors are open protrusions are avoided guaranteeing
nevertheless a correct closing.

NOTE
For the passing of the cable of the command function
the installation into the floor of a wrinkled cable sleeve
is necessary. The installation of the N626 requires trained
personnel.

10
Specific optional accessories
PROGET Fire doors

FF REBATE SEALING

fire doors
PROGET
FF/CR sealing (for EI2 doors) and FF sealing (for REI doors)
in black extruded profile to cut and to be pressed into
the dedicated groove in the perimetral frame and on the
central joint of two-leaved doors.

THRESHOLD

Fixed threshold in anodized aluminium supplied with rela-

tive rebate sealing. To be installed for single and double
leaved doors onto the floor with screws and plugs (not
supplied).

13
NOTE 30 35

3
This devices is delivered only when the door has been or-
dered with thermal insulating characteristics.
For the installation it is necessary to adapt the threshold
to the frame of the door and to drill a hole for its fixing.
Further it is necessary to finish up the threshold with sili-
cone.

11
 Environmental characteristics
PROGET Fire doors

ENVIRONMENTAL CHARACTERISTICS
fire doors
PROGET

OF FIRE DOORS

The norms EN 14351-1 (external doors) and EN 14351-2

(internal doors) are not applicable for fire rated doors,
nevertheless they may be taken as a reference to
determine the environmental characteristics of the latter.
marking is not mandatory, tests for their classification
are purely provided on a voluntarily basis.

The Proget pricelist lists Kits which add this environmental

characteristic to the door.

Test Report Summary & Expert

Statement
Airborne sound insulation of building ATTENTION
components
For the dimensional limits according to the certificates
Report-No. 12-001195-PR01
(GAS-C02-04-en-01) and homologations of the fire rated doors and regarding
the minimum borders please refer to the specific pages of
Client NINZ s.p.a.
Basis
EN ISO 10140-1: 2010
this brochure.
Corso Trento 2/A EN ISO 10140-2: 2010
EN ISO 717-1: 1995+A1: 2006
38061 ALA EN 14351-1 : 2006
Italy Documentation for test series
11-000271 referring to sound The values for the thermal transmittance W/m²K shown in
insulation measurement of door

Product Fire door, single and double leaf

sets.
the table on the next page are given by the calculation
Designation PROGET REI 120 - PROGET EI² 90 / 120
Translation to 12-001195-PR01
(GAS-C02-04-de-01) dated 10
May 2012.
according to the norm EN ISO 10077-1 done on samples of
Steel frame variants with infill panel
the dimensions 1,23x2,18 for areas ≤ 3,6m² and on samples
Door frame
Instructions for use
Coordinating Width 0.80 m … 1.34 m (single leaf)/1.00 m … 2.66 m This test report serves to dem-
dimensions
(double leaf), height: 2.00 m … 2.67 m onstrate the airborne sound in-
sulation of building elements of the dimensions 2,00x2,18 for areas > 3,6m².
Door leaf Steel door with insulating insert and optional glazed panel For Germany the following ap-
plies:
Door leaf
Width 0.40 m … 1,327 m, Height: 1.99 m … 2.66 m - Rw,R as per DIN 4109:
dimensions

Glazing Variants: single, laminated or insulating glass unit

(Rw corresponds to Rw,P,
Rw,R = Rw,P – 5 dB) All performance values indicated in the table are valid
- Rw,R for Construction Prod-
Rebate seals 1 frame rebate seal ucts List (Bauregelliste) only in presence of the following accessories or enhance-
Floor seals 1 automatic floor seal (drop seal) Validity
The data and results given refer
solely to the tested and de-
ments:
- standard frame to be installed with wall anchors and
scribed test specimen.
Testing to one performance
Weighted sound reduction index Rw characteristic does not allow
Spectrum adaptation terms C and Ctr any statement to be made on
any further characteristic of the mortar or with screws and plugs
present construction regarding
Design variants up to performance and quality .
- embracing frame prepared for the installation onto
Rw (C; Ctr) = 36 (-1, -3) dB Notes on publication

as per Section 4.2

The ift Guidance Sheet "Condi-
tions and Guidance for the Use
lightweight constructions
ift Rosenheim
of ift Test Documents" applies.
The cover sheet can be used - isolation of the frame with the filling of cement or plas-
as an abstract.
10.05.2012 Contents
The report comprises a total of
terboard
12 pages.
1 Object
- installation of rubber seals FF along the entire perimeter
of the door frame including the central rebate for dou-
2 Procedure
3 Detailed results
4 Instructions for use

Dr. Joachim Hessinger, Dipl.-Phys. Johann Baume, Dipl.-Ing. (FH)

ble leaved doors
Head of Testing Department
Building Physics
Operating Testing Officer
Building Acoustics - RC2 closing regulator (instead of RC/STD) for two leaved
doors
Ve-Prü-1302-de / 06-11 / 584

- presence of the automatic door sweep or the fixed low-

er threshold depending upon selected solution.

In case of windows with dimensions larger than those test-

ed (300x400mm), up to a maximum size of 400x600mm
the differing performance value for the thermal transmit-
tance needs to be asked, the performance value for acous-
tic isolation remains unchanged.
For the acoustic isolation performance values, in case of
asymmetric double leaved doors (L1≠L2), select the minor
Rw value of the two (example 1: leaf without windows
and H=2150, L1=1000, L2=500 select 32 dB; example 2:
leaf without windows and H=2150, L1=1200, L2=1000 se-
lect 35 dB).

12
Environmental characteristics
PROGET Fire doors

Performance requirements and reached class with FF or reached class with FF or

block frame for in the reveal applic.

fire doors
PROGET
classification FF/CR rebate sealing and FF/CR rebate sealing and
automatic door sweep fix threshold

standard angular frame

resistance to windload
thermal transmittance

thermal transmittance
acoustic performance
(W/m²K) according to

(W/m²K) according to
air permeability class
air permeability class

water-tightness class
embracing frame

class according to
EN 10077-1:2007

EN 14351-1:2006

EN 10077-1:2007

EN 12211:2001
EN 1026:2001

EN 1027:2001
EN 1026:2001

according to

according to

according to
according to
FM L x H
dimensions class
without ≤ 3,6 m² EI260, REI 60 2 1,37 2 1,35 1A
window ≤ 3,6 m² EI260, REI 60 2 1,51 2 1,50 1A
≤ 3,6 m² EI260 2 1,52 2 1,51 1A
≤ 3,6 m² EI2120, REI 120 2 1,39 2 1,38 1A
≤ 3,6 m² EI2120 2 1,54 2 1,53 1A
≤ 3,6 m² REI 120 2 1,53 2 1,52 1A
800 - 1100 x 2000 - 2250 EI290/120, REI 120 Rw = 36 dB
1101 - 1340 x 2000 - 2250 EI290/120, REI 120 Rw = 35 dB
800 - 1340 x 2251 - 2670 EI290/120, REI 120 Rw = 34 dB
546 - 1150 x 1775 - 2150 ALL C1
with ≤ 3,6 m² EI260, REI 60 2 1,89 2 1,88 1A
window ≤ 3,6 m² EI260, REI 60 2 2,02 2 2,01 1A
300x400 ≤ 3,6 m² EI260 2 2,03 2 2,02 1A
≤ 3,6 m² EI2120, REI 120 2 1,84 2 1,83 1A
≤ 3,6 m² EI2120 2 1,98 2 1,97 1A
≤ 3,6 m² REI 120 2 1,97 2 1,96 1A
800 - 1100 x 2000 - 2250 EI290/120, REI 120 Rw = 36 dB
1101 - 1340 x 2000 - 2250 EI290/120, REI 120 Rw = 35 dB
800 - 1340 x 2251 - 2670 EI290/120, REI 120 Rw = 34 dB
900 - 1150 x 1775 - 2150 ALL C1
without ≤ 3,6 m² EI260, REI 60 3 1,80 3 1,78 2A, 4B
windows > 3,6 m² EI260, REI 60 3 1,45 3 1,44 2A, 4B
≤ 3,6 m² EI260, REI 60 3 1,93 3 1,91 2A, 4B
> 3,6 m² EI260, REI 60 3 1,55 3 1,54 2A, 4B
≤ 3,6 m² EI260 3 1,94 3 1,92 2A, 4B
> 3,6 m² EI260 3 1,56 3 1,55 2A, 4B
≤ 3,6 m² EI290 3 1,95 3 1,94 2A, 4B
> 3,6 m² EI290 3 1,58 3 1,56 2A, 4B
≤ 3,6 m² EI290, REI 120 3 1,80 3 1,79 2A, 4B
> 3,6 m² EI290, REI 120 3 1,47 3 1,46 2A, 4B
≤ 3,6 m² REI 120 3 1,93 3 1,92 2A, 4B
> 3,6 m² REI 120 3 1,56 3 1,55 2A, 4B
(L1 o L2) 500 - 799 x 2000 - 2670 EI290/120, REI 120 Rw = 32 dB
(L1 o L2) 800 - 1100 x 2000 - 2250 EI290/120, REI 120 Rw = 36 dB
(L1 o L2)1101 - 1330 x 2000 - 2250 EI290/120, REI 120 Rw = 35 dB
(L1 o L2) 800 - 1330 x 2251 - 2670 EI290/120, REI 120 Rw = 34 dB
890 - 2300 x 1775 - 2150 ALL C1
with ≤ 3,6 m² EI260, REI 60 3 2,91 3 2,80 2A, 4B
windows > 3,6 m² EI260, REI 60 3 2,14 3 2,08 2A, 4B
300x400 ≤ 3,6 m² EI260, REI 60 3 3,04 3 2,94 2A, 4B
> 3,6 m² EI260, REI 60 3 2,24 3 2,17 2A, 4B
≤ 3,6 m² EI260 3 3,06 3 2,95 2A, 4B
> 3,6 m² EI260 3 2,25 3 2,18 2A, 4B
≤ 3,6 m² EI290 3 2,85 3 2,84 2A, 4B
> 3,6 m² EI290 3 2,13 3 2,12 2A, 4B
≤ 3,6 m² EI290, REI 120 3 2,70 3 2,69 2A, 4B
> 3,6 m² EI290, REI 120 3 2,03 3 2,02 2A, 4B
≤ 3,6 m² REI 120 3 2,83 3 2,82 2A, 4B
> 3,6 m² REI 120 3 2,12 3 2,11 2A, 4B
(L1 o L2) 500 - 799 x 2000 - 2670 EI290/120, REI 120 Rw = 32 dB
(L1 o L2) 800 - 1100 x 2000 - 2250 EI290/120, REI 120 Rw = 36 dB
(L1 o L2)1101 - 1330 x 2000 - 2250 EI290/120, REI 120 Rw = 35 dB
(L1 o L2) 800 - 1330 x 2251 - 2670 EI290/120, REI 120 Rw = 34 dB
1250 * - 2300 x 1775 - 2150 ALL C1

* = only for single leaf with window

13
 Door cross sections - Measurements
PROGET Fire doors

One-leaved doors - Horizontal cross section Doors without lower threshold - Vertical cross section
fire doors
PROGET

+20
Wall opening FM L +10

35 Doorframe opening = FM L -80

Exterior doorframe = FM H +30

Doorframe opening = FM H -40
40

+15
Wall opening FM H +5
100

15

Handle height
70 50

= 1050
Exterior doorframe = FM L +60
FFL

Two-leaved doors - Horizontal cross section

Doorframe opening = FM L -80

Active leaf opening = L1 -81

(*)
L2 L1
+20
Wall opening FM L +10 = L1 + L2

Exterior doorframe = FM L +60

One-leaved doors with frame on 4 sides and One-leaved doors with frame on 4 sides and
leaf with lower rebate - Vertical cross section leaf without lower rebate - Vertical cross section
40

40
Exterior doorframe = FM H +80

Exterior doorframe = FM H +80

= wall opening height - 15

= wall opening height - 15

Order measurement FM H

Order measurement FM H
Wall opening height

Wall opening height

Doorframe opening

Doorframe opening
= FM H -60

= FM H -60
Handle height

Handle height
= 1065

= 1065
35

35
15

15

Leaf thickness NOTE +20 +15

EI260, EI290, EI2120, REI 60, REI 120 60 mm The tolerances FM L +10 , FM H +5 of the indicated meas-
urements make it easier to fill the gap between the wall
and the doorframe with cement mortar.
For dry wall installation, the holes must be precise and
greater tolerance ranges should not be employed.
(*) Proget EI290 two leaved doors feature an additional
isolated central rebate profile, which is applied onto the
active leaf.

14
Standard installation method
PROGET Fire doors

INSTALLATION WITH ANCHORS

fire doors
PROGET
FOR MORTAR FIXING

The standard installation method for Proget doors is to

use the anchors for mortar fixing. Appropriate cuts will
need to be created in the walls (section 80 x 200 mm).
The anchors should be bent and blocked inside the wall.
For fire sealing purposes and a perfect mechanical fit, the
space between the doorframe and the masonry shall al-
ways be filled with concrete mortar.

One-leaved doors
FM L = from 500 to 1035 x FM H = from 1775 to 2200 FM L greater than 1035 and/or FM H greater than 2200

Two-leaved doors
FM L = from 850 to 2070 x FM H = from 1775 to 2200 FM L greater than 2070 and/or FM H greater than 2200

NOTE
For proper installation, the cuts for the anchors should be
80 x 200 mm in size.

15
 Optional installation methods
PROGET Fire doors

DRY WALL INSTALLATION ONTO THE SUBFRAME

fire doors
PROGET

WITH SCREWS

Installation method certified for one- or two-leaved REI 60

and REI 120 doors, in conformity with UNI 9723 standard,
for screw fixing onto metal subframes in the walls.

Subframes need to be ordered separately from the door.

Make sure measurements correspond to the door’s FM L x
FM H measurements.
For the technical characteristics of the subframe, see the
specific page of the section “accessories doors”.
Doorframe opening
The supplied doorframe comes factory heat-insulated with
special materials and includes corner joints and a lower
spacer (except for one-leaved doors with frame on four
sides) to be added on site.

The subframe method allows a “dry wall” installation of

the doors, making an installation onto finished masonry Wall opening
possible.

INSTALLATION FOR EXPANSION SCREWS FIXING

Installation method certified for: one- or two-leaved EI260,

REI 60, REI 120, EI290 two-leaved and EI2120 one-leaved
doors, for expansion screws. Designed for installations
onto blockwork, masonry or homogenous concrete
wall, with density of (1200±400)kg/m3 and a thickness of
(200±50)mm.

The supplied doorframe comes factory heat-insulated with

special materials and includes corner joints and a lower
spacer (except for one-leaved doors with frame on four EI260, REI 60 and REI 120 doors EI290, EI2120 doors
sides) to be added on site.
This method allows for “dry wall” installation of the doors Doorframe opening *
without requiring any additional masonry work. Installa-
tion of the door, therefore, becomes a simple mechanical
operation plus the final adjustments.

NOTE
Wall opening
Please specify clearly whether the door is for subframe
installation or for direct wall installation with expansion
screws.
* concealing with concrete mandatory for EI290 and EI2120
fire-rated doors.

WALL SCREWS

For direct wall installations or installation onto subframes,

special expansion screws should be used without plugs.
Please see the “door accessories” pages for more details.

16
Optional installation methods
PROGET Fire doors

BLOCK FRAME FOR IN THE REVEAL APPLICATION

fire doors
PROGET
Installation method certified for one- and two-leaved
EI260, one-leaved EI2120 or two-leaved EI290 doors.
The supplied frame comes factory heat-insulated with
special materials and includes corner joints and pre-drilled
screw holes on the rebate. Installation for expansion
screws (not supplied).
This method allows for “dry wall” installation of the doors
without requiring any additional masonry work. Installa-
tion of the door, therefore, becomes a simple mechanical
operation plus the final adjustments.

ATTENTION
Acoustic performance values are not valid in case of block
frame for in the reveal application.

DOOR CROSS SECTIONS - MEASUREMENTS

One-leaved doors Doors without lower threshold

Horizontal cross section Vertical cross section

Wall opening = FM L +70

75

Order measurement FM L 30

Exterior doorframe = FM H +30

Wall opening = FM H +35

Order measurement FM H
min. 150

Doorframe opening
= FM H -40

70 Doorframe opening = FM L -80 50

Exterior doorframe = FM L +60 FFL

Two-leaved doors
Horizontal cross section

Order measurement FM L = L1 + L2
Doorframe opening = FM L -80
Active leaf opening = L1 -81

L2 * L1
Exterior doorframe = FM L +60
Wall opening = FM L +70

NOTE (*) Proget EI290 two leaved doors feature an additional

Expansion screws recommended: isolated central rebate profile, which is applied onto the
- for light wall Würth type DBL-(WUS-SK)-Z3-180-10x202 active leaf.
- for heavy wall Spit type L 10 - 102/152

17
 Lightweight construction installation
PROGET Fire doors

LIGHTWEIGHT CONSTRUCTION INSTALLATION

fire doors
PROGET

WITH EMBRACING FRAME

Installation method onto lightweight constructions certi-

fied for one- or two-leaved EI260, REI 60 and REI 120 doors.
The supplied frame comes factory heat-insulated with
special materials and includes corner joints and pre-drilled
screw holes with cover caps.

Door cross section and lightweight construction version:

EI230 EI260 EI290
Lightweight constructions EI260
EI260 fire-rated doorsets can be installed onto every wall
or partition which is of the board covered type with studs
Opening to be created made from metal or timber with a fire resistance equal to
or greater than the EI60 supporting construction.
Doorframe opening
Order required doorframe exterior
min. 75

measurement wall opening opening of doorframe

FM L (width) FM L - 25 mm FM L - 80 mm FM L + 60 mm
FM H (height) FM H - 12 mm FM H - 40 mm FM H + 30 mm

Order measurement FM L x H
NOTE
Lightweight constructions should be done following the
Exterior of doorframe
specific door installation instructions.

Door cross section and plasterboard version:

Plasterboard walls REI 60
REI 30 REI 60 REI 90
Made using galvanized steel frames with “U”-shaped
75x40mm min. guide profiles, “C”-shaped 75x47mm min.
Opening to be created vertical profiles (doubled next to the doorframe), with a
single layer of 12,5mm min. thick fire rated plasterboard
Doorframe opening used as finishing on both sides and on the profiles around
min. 100

the doorframe.

Order Required Doorframe Exterior

measurement wall opening opening of doorframe
FM L (width) FM L - 25 mm FM L - 80 mm FM L + 60 mm
FM H (height) FM H - 12 mm FM H - 40 mm FM H + 30 mm
Order measurement FM L x H

Exterior of doorframe

Plasterboard walls REI 120

Door cross section and plasterboard
REI 30 version: REI 60 REI 90
Made using galvanized steel framing with “U”-shaped
75x40mm min. guide profiles, “C”-shaped 75x47mm min.
Opening to be created vertical profiles (doubled next to the doorframe), with a
double layer of 12,5mm min. thick fire rated plasterboard
Doorframe opening used as finishing on both sides and on the profiles around
the doorframe.
min. 125

Order required doorframe exterior

measurement wall opening opening of doorframe
FM L (width) FM L - 25 mm FM L - 80 mm FM L + 60 mm
FM H (height) FM H - 12 mm FM H - 40 mm FM H + 30 mm
Order measurement FM L x H

Exterior of doorframe

18
Order measurements
PROGET Fire doors

ORDER MEASUREMENTS

fire doors
PROGET
Lightweight construc-
Wall opening Doorframe opening tions wall opening Block frame opening

PTL = FM L - 80 FPC L = FM L - 25 Opening L = FM L + 70

PTH = FM H - 40 FPC H = FM H - 12 Opening H = FM H + 35

NOTE
The wall openings to be created for the embracing fra-
me or the block frame for in the reveal application, do
not correspond to the order measurement and therefore
should follow the above specifications.

One-leaved doors
FM L x FM H PT L x PT H (doorframe opening) fire-rating
standard dimensions frame on 3 sides frame on 4 sides class
EI260, EI2120,
800 x 2000 / 2050 / 2100 / 2150 / 2200 720 x 1960 / 2010 / 2060 / 2110 / 2160 720 x 1940 / 1990 / 2040 / 2090 / 2140
REI 60, REI 120
EI260, EI2120,
900 x 2000 / 2050 / 2100 / 2150 / 2200 820 x 1960 / 2010 / 2060 / 2110 / 2160 820 x 1940 / 1990 / 2040 / 2090 / 2140
REI 60, REI 120
EI260, EI2120,
1000 x 2000 / 2050 / 2100 / 2150 / 2200 920 x 1960 / 2010 / 2060 / 2110 / 2160 920 x 1940 / 1990 / 2040 / 2090 / 2140
REI 60, REI 120
EI260, EI2120,
1100 x 2050 / 2100 / 2150 / 2200 1020 x 2010 / 2060 / 2110 / 2160 1020 x 1990 / 2040 / 2090 / 2140
REI 120
EI260, EI2120,
1200 x 2050 / 2100 / 2150 / 2200 1120 x 2010 / 2060 / 2110 / 2160 1120 x 1990 / 2040 / 2090 / 2140
REI 120
EI260, EI2120,
1300 x 2000 / 2050 / 2100 / 2150 / 2200 1220 x 1960 / 2010 / 2060 / 2110 / 2160 1220 x 1940 / 1990 / 2040 / 2090 / 2140
REI 60, REI 120
EI260, EI2120,
1340 x 2050 / 2100 / 2150 / 2200 1260 x 2010 / 2060 / 2110 / 2160 1260 x 1990 / 2040 / 2090 / 2140
REI 120

semi-standard dimensions
from 670 to 995 x 2000 / 2050 / 2150 from 590 to 915 x 1960 / 2010 / 2110 from 590 to 915 x 1940 / 1990 / 2090 EI260
from 710 to 995 x 2000 / 2050 / 2150 from 630 to 915 x 1960 / 2010 / 2110 from 630 to 915 x 1940 / 1990 / 2090 EI2120
from 546 to 995 x 2000 / 2050 / 2150 from 466 to 915 x 1960 / 2010 / 2110 from 466 to 915 x 1940 / 1990 / 2090 REI 60, REI 120

non standard dimensions

from 670 to 1340 x from 1950 to 2600 from 590 to 1260 x from 1910 to 2560 from 590 to 1260 x from 1890 to 2540 EI260
from 710 to 1340 x from 1900 to 2640 from 630 to 1260 x from 1860 to 2600 from 630 to 1260 x from 1840 to 2580 EI2120
REI 60, REI 120
from 546 to 1340 x from 1775 to 2670 from 466 to 1260 x from 1735 to 2630 from 466 to 1260 x from 1715 to 2610
anchor fixing
REI 60, REI 120
from 600 to 1170 x from 1775 to 2275 from 520 to 1090 x from 1735 to 2235 from 520 to 1090 x from 1715 to 2215
embracing frame
REI 60, REI 120
from 1004 to 1340 x from 2050 to 2500 from 924 to 1260 x from 2010 to 2460 from 924 to 1260 x from 1990 to 2440
embracing frame
REI 60, REI 120
from 600 to 1170 x from 1775 to 2275 from 520 to 1090 x from 1735 to 2235 from 520 to 1090 x from 1715 to 2215 subframe or
expansion screw
REI 60, REI 120
from 1004 to 1340 x from 2050 to 2500 from 924 to 1260 x from 2010 to 2460 from 924 to 1260 x from 1990 to 2440 subframe or
expansion screw

19
 Order measurements - Handle height
PROGET Fire doors

Two-leaved doors FM L x FM H PT L x PT H fire-rating

fire doors
PROGET

standard dimensions doorframe opening class

1150 ( 800 + 350) x 2000 / 2050 / 2100 / 2150 / 2200 1070 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1200 ( 800 + 400) x 2000 / 2050 / 2100 / 2150 / 2200 1120 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1250 ( 800 + 450) x 2000 / 2050 / 2100 / 2150 / 2200 1170 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1250 ( 900 + 350) x 2000 / 2050 / 2100 / 2150 / 2200 1170 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1300 ( 900 + 400) x 2000 / 2050 / 2100 / 2150 / 2200 1220 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1350 ( 900 + 450) x 2000 / 2050 / 2100 / 2150 / 2200 1270 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1350 (1000 + 350) x 2000 / 2050 / 2100 / 2150 / 2200 1270 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1400 (1000 + 400) x 2000 / 2050 / 2100 / 2150 / 2200 1320 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1450 (1000 + 450) x 2000 / 2050 / 2100 / 2150 / 2200 1370 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, REI 60, REI 120
1600 ( 800 + 800) x 2000 / 2050 / 2100 / 2150 / 2200 1520 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, EI290, REI 60, REI 120
1700 ( 900 + 800) x 2000 / 2050 / 2100 / 2150 / 2200 1620 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, EI290, REI 60, REI 120
1800 ( 900 + 900) x 2000 / 2050 / 2100 / 2150 / 2200 1720 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, EI290, REI 60, REI 120
1800 (1000 + 800) x 2000 / 2050 / 2100 / 2150 / 2200 1720 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, EI290, REI 60, REI 120
1900 (1000 + 900) x 2000 / 2050 / 2100 / 2150 / 2200 1820 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, EI290, REI 60, REI 120
2000 (1000 + 1000) x 2000 / 2050 / 2100 / 2150 / 2200 1920 x 1960 / 2010 / 2060 / 2110 / 2160 EI260, EI290, REI 60, REI 120

semi-standard dimensions
from 890 (540 + 350) to 2000 (1000 + 1000) x 2000 / 2050 / 2150 from 810 to 1920 x 1960 / 2010 / 2110 EI260, REI 60, REI 120
from 1175 (600 + 575) to 2000 (1000 + 1000) x 2000 / 2050 / 2150 from 1095 to 1920 x 1960 / 2010 / 2110 EI290

non standard dimensions

from 890 (540 + 350) to 2540 (1270 + 1270) x from 1775 to 2600 from 810 to 2460 x from 1735 to 2560 EI260
from 1175 (600 + 575) to 2540 (1270 + 1270) x from 1775 to 2300 from 1095 to 2460 x from 1735 to 2260 EI290
from 1175 (600 + 575) to 2500 (1250 + 1250) x from 2301 to 2500 from 1095 to 2420 x from 2261 to 2460 EI290
from 1175 (600 + 575) to 2380 (1200 + 1180) x from 2501 to 2630 from 1095 to 2300 x from 2461 to 2590 EI290
from 890 (540 + 350) to 2540 (1270 + 1270) x from 1775 to 2670 from 810 to 2460 x from 1735 to 2630 REI 60, REI 120 anchor fixing
from 890 (540 + 350) to 2298 (1164 + 1134) x from 1775 to 2275 from 810 to 2218 x from 1735 to 2235 REI 60, REI 120 embracing frame
from 1962 (996 + 966) to 2540 (1270 + 1270) x from 2050 to 2500 from 1882 to 2460 x from 2010 to 2460 REI 60, REI 120 embracing frame
REI 60, REI 120
from 890 (540 + 350) to 2298 (1164 + 1134) x from 1775 to 2275 from 810 to 2218 x from 1735 to 2235
subframe or expansion screw
REI 60, REI 120
from 1962 (996 + 966) to 2540 (1270 + 1270) x from 2050 to 2500 from 1882 to 2460 x from 2010 to 2460
subframe or expansion screw

NOTE
The following doors with standard measurements are EI2120 1 leaf: from 1126 to 1340 x from 2301 to 2500
equipped with a CP1 door closer: from 901 to 1340 x from 2501 to 2640
EI290 2 leaves: from 2271 to 2540 x from 2151 to 2300 REI 120 1 leaf: from 1126 to 1340 x from 2301 to 2500
from 1801 to 2500 x from 2301 to 2500 from 901 to 1340 x from 2501 to 2670
from 1801 to 2380 x from 2501 to 2630 2 leaves: from 2251 to 2540 x from 2151 to 2300
from 1801 to 2540 x from 2301 to 2670

HANDLE HEIGHT

One-leaved door Two-leaved door

h = 1050 (FM H ≥ 1750). h = 1050 (FM H ≥ 1750)
Different heights available upon request only Different heights available upon request only

20
Opening measurements - Overall dimensions
PROGET fire doors

OPENING MEASUREMENTS AND OVERALL

fire doors
PROGET
DIMENSIONS WITH 90 DEGREE OPENING

One-leaved doors with panic bar Two-leaved doors with panic bars

Net passage calculation

one-leaved door two-leaved door
panic bar type protrusion one-leaved door two-leaved door with block frame with block frame
EXUS 125 FML - 245 FML - 410 Opening - 315 Opening - 480
TWIST 100 FML - 220 FML - 360 Opening - 290 Opening - 430
SLASH 75 FML - 195 FML - 310 Opening - 265 Opening - 380
FAST TOUCH 75 FML - 195 FML - 310 Opening - 265 Opening - 380
without panic bar - FML - 120 FML - 160 Opening - 190 Opening - 230
z = leaf protrusion relative to the wall FML + 27 EI260, REI 60, REI 120 = L1 + 35, L2 + 75; EI290 = L1 + 67, L2 + 75

OVERALL DIMENSIONS
WITH 180 DEGREE OPENING

One-leaved door Two-leaved door

x = FML - 7 EI260, REI 60, REI 120: x = L1 + 1; EI290: x = L1 + 33; y = L2 + 42
b = max. 130 (only in the presence of a panic bar or M14 handle)

21
 Painting
For NINZ doors
fire doors
PROGET

Painting
This standard door is painted with thermoset powders, anti-scratch orange skin
and semi-glossy finish (except for certain colors). The paint is particularly resistant
and offers a pleasant finish for interior applications. Choose from a wide range
of RAL colors.

COLORS FOR INTERIOR USE Group 01 - standard colors: RAL colors upon request:
WITHOUT PRICE SUPPLEMENT leaf color NCS 4020-B50G RAL RAL RAL RAL
1013 5010 7016 7035
Paint for interior use (group 01) with epoxy-polyester
powders.
Standard colors (without any specification): RAL
turquoise pastel - lighter tone for the leaf (NCS4020-B50G) 9010
and darker for the frame (NCS5020-B50G). frame color NCS 5020-B50G

Other RAL colors are available upon request (to be indi-

cated in the order).

COLORS FOR INTERIOR USE Group 02:

WITH PRICE SUPPLEMENT RAL RAL RAL RAL RAL RAL RAL RAL
1015 5024 6000 7024 7038 8011 9001 9002
Paint for interior use (groups 02 and 03) available in a va-
riety of RAL colors with epoxy-polyester powders. Doors
must be protected from atmospheric agents. Sunlight RAL RAL RAL
fades the colors. 9011 9016 9018

Distinct from other RAL colours, metallic tinted paints RAL

9006, RAL 9007 (group 3) and RAL 9006 E (group 04) pre- Group 03:
sent a finish with a wrinkled structure that requires pre- RAL RAL RAL RAL RAL RAL RAL RAL
approval of a sample. 1001 1003 3000 3003 3020 5012 5015 6005

RAL RAL RAL RAL RAL RAL RAL RAL

7001 7004 7011 7030 7032 7037 7040 7042

RAL RAL RAL RAL RAL RAL

7047 8017 8019 9005 9006* 9007*

*requires pre-approval of a sample.

22
Painting
For NINZ doors

COLORS FOR EXTERIOR USE Group 04:

fire doors
PROGET
WITH PRICE SUPPLEMENTS RAL RAL RAL RAL RAL RAL RAL RAL
1013E 3000E 5010E 6005E 7016E 7024E 7035E 9002E
Paint for exterior use (group 04) with polyester powders
in various RAL colours.
RAL RAL NCS NCS
9006E* 9010E 4020E 5020E

*requires pre-approval of a sample.

COLORS ON REQUEST Group 05:

WITH PRICE SUPPLEMENTS Colors on request only

Paint available for interior and exterior use (group 05)

with epoxy-polyester and polyester (respectively) powders
in the requested RAL colours. Group 05 does not include
special colors, such as metallic, mica, smooth or wrinkled
texture and other sample colours like Pantone, NCS, etc.

SPECIAL PAINTING ON REQUEST Group 06:

WITH PRICE SUPPLEMENTS Colors on request only

Bacterial proof painting

Paint available for interior and exterior (group 06) with
epoxy-polyester and polyester with silver ions additives.
On surface painted with this particular treatment, germs
are hindered to take root and proliferate, offering good
resistance to routine cleaning. Particularly suitable for use
on doors intended for health care facilities, food indus-
tries, schools and child care, etc.

Graffiti proof painting

Paint for exterior (group 06) that allows, through a spe-
cial solvent, to easily remove the graffiti. It provides long-
lasting protection, allowing repeated cleanings without
damaging the finish.

PRECAUTIONS

Installation Re-painting
In case of exterior installation of the doors, in addition to - For re-painting, use the following procedure:
use special paints which are especially designed for this - sand and carefully wipe away any dust from the surfaces
kind of application (see groups 04 and 05), in order to - apply a base coat of semi-gloss acrylic (we recommend
avoid any product degradation, it is important to: the product ACRILFIN SL series 567 made by ELCROM -
- protect the doors from bad weather and water seeping Italy + 20% by weight aliphatic hardener series E872003)
in; - repaint the surfaces with your choice of lacquers or
- avoid direct sun rays and the subsequent warping of the paints.
door leaf, especially in case of darker colors.
For more details, refer to the “Notices” section of this bro-
chure.

Cleaning Retouching
Water and neutral soap are recommended for the regu- Upon request, the company Ninz also provides touch-up
lar cleaning of our products. Do not use common clean- colors for the required RAL colour paint (nitro/synthetic)
ing products (see detergents) and/or other solvents. We in 60 gr. handy bottle with brush cap or in 1,00 kg can.
shall not be held responsible for any problems that arise if
these guidelines are not respected.

23
 NDD® - Ninz Digital Decor
Digital printing for NINZ doors
fire doors
PROGET

Ninz Digital Decor

NDD provides clients
with an infinite number
of graphic possibilities
applicable to the
surfaces of NINZ doors.

DESCRIPTION

NDD - Ninz Digital Decor decorative painting. NDD® - Ninz Digital Decor introduces style and design to
Graphic illustrations are applied directly to the flat sur- metal door products. Ninz doors can be directly printed with
faces of the door leaf after it has been painted with a base either your company’s logo or designs, materials and sym-
coat of polymerized powders. Painting with high-resolu- bols selected from a wide variety of NDD®, or also with your
tion digital print using special ink jets. The application of preferred artwork or customized images. NDD® introduces
an additional layer of transparent coating ensures optimal innovations to doors as an architectural entity; introducing
protection of the decorative paint. NDD® can create added value on socio-cultural, economic
Decorative NDD painting is available for the entire range and emotional dimensions.
of one- and two-leaved Rever, Univer and Proget doors.

awarded with the The www.ninz.it website illustrates an infinity of continu-

ously updated decorations that have been categorized into
eight groups for rapid review. The groups are listed on the
next page.

Laboratory testing executed on NDD® samples result

500 h exposure test in salt fog good performance, no sign of deterioration encountered

500 h humidity resistance test good performance, no deterioration or loss of surface shine

500 h UVA radiation resistance test good performance, no deterioration or loss of surface shine

Abrasion resistance test after 1000 cycles the decoration was unaltered

Solvent resistance test good performance, no deterioration in the decoration or the background paint

24
NDD® - Decoration groups - www.ninz.it
Digital printing for NINZ doors

ARTLINE This group includes a wide selection of famous WOOD This set includes an endless variety of realistic imi-

fire doors
PROGET
artworks drawn from ancient history up to the present tations of classic, exotic, special and colored types of wood.
day. These extraordinary designs endow the environment
with a special atmosphere as an expression of style.

FANTASY NDD is a data bank of exclusive NINZ images STONES This selection includes an endless variety of real-
and creations. istic imitations of marbles, granites and other stones.

PATTERN Contains an infinite number of NDD decora- PUBLICITY Transforms Ninz doors into a publicity tool
tions and textures created on customer request and avail- for the company and its products. Printing of the logo in-
able and useable for a diverse variety of applications. tegrates the door into the company image. A variety of
actual applications are reported here.

PHOTOGRAPHS This group contains original photos of SYMBOLS Given the particular importance of this group,
country sides, objects, animals, environments, etc., with a special department has been created for workplace safe-
the appropriate foto resolution. ty symbols, room description/labeling symbols, the simple
numbering of rooms, etc.

25
 NDD® - Specifications
Digital prints for NINZ doors

DECORATIONS FROM OUR DATABASE WOODEN CRATE PACKAGING

fire doors
PROGET

Doors with decorative NDD painting are supplied with:

-- doorframes in the proposed color

-- door leaf rebate in the base color of the leaf itself
-- hinges in the frame color
-- accessories of the type and finishing according to the Ninz
door price lists and brochures
-- decoration covering the window frame and/or the central
upright, requitre that these are covered with NDD decorat-
ed sheet metal

SPECIAL DECORATIONS The particularity and prestige of NDD decorations requires

a special protection of the doors by packaging them in
New codes and pricing are required for customized deco- special wooden crates with an additional layer of external
rations and decorations that employ colors not listed in nylon wrapping. At the time of ordering, therefore, the
this brochure. In such cases, customers may also be asked additional cost for the wooden crate must be taken into
to indicate where logos and symbols should be positioned consideration. Customers who opt for standard packaging
on the door leaf, via the following forms of support: on pallets must assume full responsibility in case of dam-
age to the product.
-- PC-GENERATED FILE (logos, symbols, designs, etc.) in spe-
cialized “Illustrator” or “Freehand” format. Submit the
file by e-mail or on a CD/DVD-ROM.
-- DIAPOSITIVE with a 36 mm or 6 x 6 image of the picture
uploaded to a PC using a scanner (professional scanner
required). Submit the file (TIF, PDF or JPG format) in
maximum resolution on CD/DVD-ROM.
-- PHOTOGRAPHIC IMAGE made with a digital camera. Sub-
mit the file (TIF, PDF or JPG format) in maximum resolu-
tion on CD/DVD-ROM.

PROTECTION FOR EXTERIORS

The exterior installation of NDD doors requires specific

treatments for preventing the decorations from deterio-
rating over time. The cost supplement covers all door leaf
surfaces except for the leaf rebate.

26
NDD® - Example applications
In different environments

EXAMPLE APPLICATIONS IN TYPICAL SURROUNDINGS

fire doors
PROGET
Airports - Train stations Museums – Historical buildings

Commercial businesses Hospitals – Nursing homes

Sport centers – Stadiums Parking lots

Logistic centers Schools - Universities

Hotels – Residences Offices

27
 Handles
Standard for REVER - UNIVER - PROGET doors

BLACK PLASTIC HANDLES

fire doors
PROGET

By default Rever, Univer and Proget doors include safety

levers coupled with long plates with cylinder holes. Each
handle set includes a patent key insert, a 9 x 9mm square
spindle, fastener screws and spacers.

M1 HANDLE 23 124
The M1-type handles are supplied as standard for fire-
rated Univer, all Proget type doors and, on request, for all

166

72
other types of NINZ doors.
M1 handles are fire rated consisting of a metal core inside
the lever and a galvanized steel cover plate to protect the
Ø20
cylinder hole and have been certified in accordance with
DIN 18273:1997-12.

67
The M1 handle package includes: a pair of black plastic
lever with metal cores and galvanized steel installation
plates, a pair of black plastic cover plates with patent-type M1 plastic handle
cylinder hole adaptable for installation of Euro profile cyl-
inders, a 125 mm long 9 x 9 square spindle, fastener screws
and spacers. The package includes also the hexagonal key
for setting of the hinges and fastening of the spring screw.

28
Handles
For locks with an inter-axis distance of 72 mm

COLORED HANDLES 23 124

fire doors
PROGET
On request, painted resin handles can be provided which
match or provide better contrast with the base color of

166

72
the door.
M1C and M2C handles are fire rated like the M1 han-
dle, and have also been certified in accordance with DIN Ø20
18273:1997-12.
The M1C and M2C handles package consist of: one pair of

67
lever handles (M1C) or the handle/ doorknob combination
(M2C) made of plastic with a metal core and galvanized
steel installation plate, a pair of plastic cover plates with M1C handle colored RAL1023
a Euro profile cylinder hole, a 9x9mm square spindle, fas-
tener screws and spacers.
Colors available:
RAL RAL RAL RAL RAL
1023 7016 7035 9006* 9010
*light aluminum

STAINLESS STEEL HANDLES 23 130

On request, brushed stainless steel AISI 304 levers and cov-

er plates can be provided which endow the product with

166

72
a higher quality while at the same time ensuring optimal
corrosion resistance and a noteworthy robustness of the
entire set. Ø20
In addition, M1X, M2X, M11X and M20X handles are
equipped with a return spring that maintains perfect

67
alignment with the geometry of the door.
They are mounted on a galvanized steel mechanism and
are supplied with fastener screws, spacers and a 9x9mm M1 stainless steel handle
square spindle (where required).

NOTE
Euro profile cylinder to be ordered separately (except for
M11X and M20X handles).
Only M1C, M1X and M11X models are combinable with
the three point locking mechanism.

29
 Handles
For locks with an inter-axis distance of 72 mm

HANDLES
fire doors
PROGET

Rever, Univer and Proget doors may be equipped on re-

quest with handles with special functions other than
those provided by standard handles.

Versions description functioning use

M1, M1R, M1C M1X handle/handle combina-
applications in which
tion with cylinder hole on door opening by
both door opening
both sides. For combination handle or key from
directions are acces-
with lock with an inter-axis both sides
sible without key
distance of 72 mm (015)
M2, M2C M2X handle/doorknob combina-
applications in which
tion with cylinder hole on the doorknob side
only one of the door
both sides. For combination requires the key for
opening directions is
with lock with an inter-axis opening
accessible with a key
distance of 72 mm (015)
M4 M4X doorknob/doorknob combina- both sides require
applications in which
tion with cylinder hole on the key for opening.
both door opening
both sides. For combination The doorknobs serve
directions are acces-
with lock with an inter-axis for pushing or pulling
sible by key only
distance of 72 mm (015) the door
M5 M5X plate/plate combination with applications in techni-
cylinder hole on both sides. cal rooms with doors
both sides require
For combination with lock that usually remain
the key for opening
with an inter-axis distance of closed and require key
72 mm (015) for opening
M9 M9X doorknob/plate combina-
both sides require applications in which
tion with cylinder hole on
the key for opening. both door opening
both sides. For combination
The doorknob serves directions are acces-
with lock with an inter-axis
for pulling the door sible by key only
distance of 72 mm (015)
M11 M11X handle/handle combination
without cylinder hole. For opening is possible applications in which
combination with lock with at any time using the the door never needs
an inter-axis distance of handle to be locked
72 mm (015)
M20 M20X handle/handle and thumbturn closure using
latch combination for interior thumbturn latch from
typical closure for
closure. For combination with inside. Emergency
bathroom doors
lock with star-shaped spindles opening from outside
only (Stel 15) with screwdriver

NOTE
For stainless steel handle the Euro profile cylinder must be
ordered separately (except for M11X and M20X handles).
Only M1, M1C, M1X, M11 and M11X models are combin-
able with the three point locking mechanism.

30
Cylinders
For REVER - UNIVER - PROGET doors

CYLINDERS

fire doors
PROGET
On request Rever, Univer and Proget doors with standard
locks (Std 015), MAC2 system control access locks or three-
point locking mechanisms (3vie PRO) may be supplied
with a Euro profile cylinder with three keys.
They may also be provided in unique coding or group
coded versions, or in combination with unique or group
mastering.

Cylinders for handles

Nickel-plated cylinder equipped with 3 keys

Versions available Lengths available for door leaf thickness

standard cylinder 40/40 60 mm
single coded cylinder 35/35 50 mm
group coded cylinder 30/30 40 mm
sample key coded cylinder
single mastered cylinder
group mastered cylinder

ATTENTION
It is important to specify MAC lock combinations in the
order.

Cylinders with thumbturn latch

Nickel-plated cylinder with chrome-plated thumbturn

latch equipped with 3 keys

Versions available Lengths available for door leaf thickness

standard cylinder with thumbturn latch 40/40 60 mm
group coded cylinder with thumbturn latch 35/35 50 mm
sample key coded cylinder with thumbturn latch 30/30 40 mm
single mastered cylinder with thumbturn latch
group mastered cylinder with thumbturn latch
mastered and emergency cylinder with thumbturn latch

NOTE
Cylinders to be combined with locks of NINZ doors must
meet DIN 18254 standards.
Main, master and/or emergency key (or keys) should be
ordered separately - they are not included with the cyl-
inder.

31
 Cylinders
For REVER - UNIVER - PROGET doors

CYLINDERS FOR PANIC BARS AND MSC HANDLES

fire doors
PROGET

Standard panic bars are supplied with a Euro profile cylin-

der with three keys.
Cylinders with single coding, grouped coding or in combi-
nation with single or grouped mastering.

Cylinders to be combined with MSC handle and

panic bars (except EXUS DC)

Nickel-plated cylinder equipped with 3 keys

Versions available Lengths available for door leaf thickness

standard half cylinder 40/10 60 mm
single coded half cylinder 35/10 50 mm
group coded half cylinder
30/10 40 mm
sample key coded half cylinder
single mastered half cylinder
group mastered half cylinder

ATTENTION
It is important to specify MAC lock combinations in the order.

Cylinders to be combined with EXUS DC panic

bars

Nickel-plated cylinder equipped with 3 keys.

Versions available Lengths available for door leaf thickness

standard cylinder 45/40 60 mm
single coded cylinder 40/40 50 mm
group coded cylinder 35/35 40 mm
sample key coded cylinder
single mastered cylinder
group mastered cylinder

NOTE
Cylinders to be combined with the locks of NINZ doors
must meet DIN 18254 standards.
Main, master and/or emergency key (or keys) should be
ordered separately - they are not included with the cyl-
inder.

32
Cylinders, Keys
For REVER - UNIVER - PROGET doors

CONFIGURED AS NEEDED!
master key opens

fire doors
PROGET
NINZ asks its partners to specify the system in the form of
all the doors
a key plan which, when prepared with care, serves as a
map for optimizing the required intervention times (from
order to installation) while ensuring that the mastering main keys
system meets the specific needs being requested. open groups
of doors
Here are a few of the configurations that are available:

1) Standard
Cylinders with different keys.

2) Single coded
Cylinders with the same keys.

3) Grouped coded
Cylinders from the same group are coded alike.

4) Main/master key systems

Grouped master key system in which each cylinder can be
opened with its own key or with a master key that can
open cylinders from one group but not others; a general Key plan example for master key systems.
master key can open all cylinders from all different groups.
Standard cylinders closed from the interior with a thumb-
turn latch cannot be opened with the main/master key.

5) Frictioned emergency
“Frictioned cylinder” means that the main or master key
can only open doors that have not been closed from in-
side, while the same doors can still be opened with the
emergency key.

6) Encrypted with sample key

Sample key coding allows for cylinders to be coded on the
basis of a sample key supplied by the customer.

KEYS

The order should specify the number of keys to be sup-

plied with the mastered cylinders.

Versions available
normal key opens the single door only
main key opens all doors from the same group
master key opens all the doors that have grouped mastering
emergency key opens all doors
Key

33
 Door closers
For REVER - UNIVER - PROGET doors

DOOR CLOSER
fire doors
PROGET

The door closer regulates the closure of the door so that

the door leaf returns properly to its final closed position
after being released. Regulation is influenced by closure
force, speed and the final impact.
Although Univer and Proget doors are equipped with
spring hinges for automatic closure, the installation of
door closers is recommended for wide and/or heavy doors
and/or in the presence of windows on the leaf.
The door closer product is addressed by EU directive
89/106/CEE, which means it is subject to marking.

CP1 with scissor arm

marked in conformity with EN 1154.
Rever, Univer and Proget doors are available, on request,
with an overhead CP1 door closer with a silver-colored
scissor arm.
The silver-colored CP1-G door closer is available for Proget
doors, for installation on the push side of the door.
The CP1/CP1-G can be used for fire rated doors and is clas-
sified for 180° closure with a force varying from 3 to 4.
Proget doors ordered with CP1 are provided with pre-
drilled installation holes on the door leaf and the frame.
Standard Univer and Proget doors include internal rein-
forcements for the CP1 application.
Optional colors (except CP1-G):
NOTE dark bronze RAL 9016 RAL 9005
Arm protrusion = 290 mm
6

51 51 51 51

CP1 REVER CP1 UNIVER CP1 PROGET (from pull side) CP1-G PROGET (from push side)

CP2 with slide channel

marked in conformity with EN 1154.
On request Rever, Univer and Proget doors are available
with an overhead CP2 door closer with slide channel. Rela-
tive to the CP1, the advantage of this system is the ab-
sence of a protruding of scissor arm.
The CP2 is suited for use on fire rated doors and has been
classified for 180° closure with force level 4.
The silver-colored CP2-G door closer is available for Proget
doors, for installation on the push side of the door, with
force level 3.
Minimum wall opening width of 1200 mm for two leaved
doors with two CP2/CP2-G applied.
Proget doors ordered with CP2 are provided with pre- Optional colors (except CP2-G):
drilled installation holes on the door leaf and the frame.
Standard Univer and Proget doors include internal rein- dark bronze RAL 9016 RAL 9005
forcements for the CP2 application.
5

52 52 52 52

CP2 UNIVER CP2 PROGET CP2 PROGET (from pull side) CP2-G PROGET (from push side)

34
Door closers
For UNIVER - PROGET doors

CP2-EMF with slide channel and

fire doors
PROGET
electro-mechanical hold open device
marked in conformity with EN 1154 and EN 1155.
The CP2–EMF differs from the CP2 in that it has an electro-
mechanical hold-open device that allows the door leaf to
be locked at an angle ranging from 80° to 120°. During
alarms or power outages, the hold-open device is un-
locked and the door is closed by the door closer.
The CP2-EMF can be used on fire doors and has a maxi-
mum opening range of 120°, with a closing force set at 4.
Minimum wall opening width of 1200 mm for two leaved
doors with two CP2-EMF applied.
Proget doors ordered with CP2-EMF are provided with
pre-drilled installation holes on the door leaf and the
frame. Standard Univer and Proget doors include internal

17
reinforcements for the CP2-EMF application.

10
52 52

CP2 EMF UNIVER CP2 EMF PROGET

maximum opening in the absence of obstacles

Model one-leaved door active leaf inactive leaf power supply absorption CE certification standard
CP1 - CP1-G 180° 180° 180° - - 0432-BPR-0054 EN 1154
CP2 175° 175° 175° - - 0432-BPR-0051 EN 1154
CP2-G 120° 120° 120° - - 0432-BPR-0051 EN 1154
0432-BPR-0051 EN 1154
CP2-EMF 120° 120° 120° 24V DC 58,3 mA
0432-BPR-0025 EN 1155
0432-BPR-0051 EN 1154
CP2-EMF-V 120° 120° 120° 48V DC 45,8 mA
0432-BPR-0025 EN 1155

NOTE
For the automatic closing of doors exposed to strong
winds, the use of a door closer with a higher closing force
is recommended.

35
 Closing regulators
For UNIVER - PROGET fire doors

CLOSING REGULATOR
fire doors
PROGET

There are two systems for applying it to the door:

Closing regulators administer the closure of two-leaved - separated from the self-closing system of the spring
doors so that the inactive leaf is overlaid on the active leaf hinge or the door closer
upon final closure. This is why it is mandatory to apply - incorporated into the closure system of the door closer
closing regulators to all two-leaved fire doors. Closing regulators are addressed by EU directive 89/106/
CEE, which means they are subject to marking.

RC/STD
marked in conformity with EN 1158.
The RC/STD closing regulator device is distinct from the
door closer and is a standard element of all Univer and
Proget two-leaved fire doors.
In Proget doors the closing regulator is inserted into the
upper horizontal groove of the frame, while in Univer
doors it is supplied separately with an anchoring rod to
be installed on site. In comparison with other regulators
which are separate from the door closer, the advantage
of the RC/STD regulator is that it is not visible when the
door is closed.
The RC/STD regulator is suited for use on fire doors and is
classified for forces ranging from 3 to 5.

ATTENTION
In case of two-leaved Proget fire-rated doors with envi-
ronmental characteristics it is mandatory to apply the RC2
closing regulator (to be ordered separatley) instead of the UNIVER PROGET
RC/STD.

RC2 system
marked in conformity with EN 1154 and EN 1158.
The self-closing RC2 system for the self closing of two-
leaved doors incorporate two CP2 with force EN 4 with
a slide channel and a regulator integrated in the upper
sliding guide. The entire system is silver colored.
The silver-colored RC2-G system is available for Proget
doors, for installation on the push side of the door, with
force EN 3.
Proget fire doors with environmental characteristics must
be ordered endowed with the RC2 system.
On request, two-leaved Univer and Proget doors are avail-
able with an RC2 regulator instead of the RC/STD.

The RC2/RC2-G system presents clear advantages:

17

10

- no protruding door-closer arms

- regulator concealed in the upper guide (even when the
door is open)
- controlled closure of both leaves 52 52
The RC2 regulator is suited for use on fire doors and is
classified for both door closers with force EN 4; the RC2-G RC2 UNIVER RC2 PROGET (from pull side)
regulator is suited for use on Proget fire doors (installa-
tion form pull side) and is classified for both door closers Optional colors (except RC2-G):
with force EN 3.
dark bronze RAL 9016 RAL 9005
Minimum wall opening width: 1200 mm for the RC2;
1500 mm for the RC2-G. Minimum inactiv leaf width:
370 mm for the RC2; 600 mm for the RC2-G.
Proget doors ordered with RC2 are provided with pre-
drilled holes for the installation of two CP2 door closers
on the leaves and the slide channel on the frame. The in-
stallation holes in Univer doors need to be drilled on site
for anchoring to the internal reinforcement of the leaves. 52

RC2-G PROGET (from push side)

36
Closing regulators
For UNIVER - PROGET fire doors

RC2–EMF1 system

fire doors
PROGET
marked in conformity with EN 1154, EN 1158 and EN 1155.
The RC2–EMF1 system differs from the RC2 in that it has an
electro-mechanical hold-open device that allows the door
leaf to be locked at an angle ranging from approx. 80°
to 130°. The active leaf is held open by the closing regu-
lator system. During alarms or power outages, the hold-
open system is unlocked and the door is closed by the door
closer. The entire system is provided in the standard silver
color.
.
The RC2-EMF1 system presents multiple advantages:
- possibility of holding the leaves open in the desired position
- no visible magnets
- no protruding door closer arms
- regulator concealed in the upper guide (even when the

17

10
door is open)
- controlled closure of both leaves
The RC2-EMF1 system is suited for use on fire rated doors 52 52
and is classified for both door closers with force level EN 4.
Minimum wall opening width of 1200 mm and minimum RC2-EMF1 UNIVER RC2-EMF1 PROGET
of 370 mm for the inactive leaf.
Proget doors ordered with RC2-EMF1 are provided with
pre-drilled installation holes on the door leaf and the
frame. The Univer door series includes internal reinforce-
ments for application of the two door closers.

maximum opening in the absence of obstacles

Model active leaf inactive leaf power supply absorption CE certification standard
RC/STD 180° 180° - - 0425-ICIM-1153 EN 1158
0432-BPR-0051 EN 1154
RC2 175° 175° - -
0432-BPR-0026 EN 1158
0432-BPR-0051 EN 1154
RC2-G 120° 120° - -
0432-BPR-0026 EN 1158
0432-BPR-0051 EN 1154
RC2-EMF1 175° 130° 24V DC 58,3 mA 0432-BPR-0025 EN 1155
0432-BPR-0026 EN 1158
0432-BPR-0051 EN 1154
RC2-EMF1-V 175° 130° 48V DC 45,8 mA 0432-BPR-0025 EN 1155
0432-BPR-0026 EN 1158

NOTE
For the automatic closing of doors exposed to strong
winds, the use of a door closer with a higher closing force
is recommended.

37
 Automatic door sweep
For NINZ doors

AUTOMATIC DOOR SWEEP

fire doors
PROGET

On request, Rever, Univer and Proget doors are available

15
with an automatic door sweep to prevent air drafts from Push
entering through the crack between the leaf and the floor. side
It complements the FF sealing applied to the frame to pro-
vide better acoustic insulation and better air sealing for
the door.

37
It is applied on the push side by using screws to attach it
directly to the sheet metal of the door, after which the
mechanism is completely covered with an anodized alu-
minum profile. On request, it can also be provided in the
same color as the door leaf.
It is applied on site following door installation so that it
can be adjusted to the actual leaf height.

FIELDS OF APPLICATION FOR

THE AUTOMATIC DOOR SWEEP

PROGET fire and multipurpose doors

FM L one-leaved door L1 active leaf L2 inactive leaf seals to be used
from 500 to 520 mm from 500 to 520 mm from 350 to 435 mm L 430 mm
from 521 to 620 mm from 521 to 620 mm from 436 to 535 mm L 530 mm
from 621 to 720 mm from 621 to 720 mm from 536 to 635 mm L 630 mm
from 721 to 820 mm from 721 to 820 mm from 636 to 735 mm L 730 mm
1 leaf/active
or inactive from 821 to 920 mm from 821 to 920 mm from 736 to 835 mm L 830 mm
from 921 to 1020 mm from 921 to 1020 mm from 836 to 935 mm L 930 mm
from 1021 to 1120 mm from 1021 to 1120 mm from 936 to 1035 mm L 1030 mm
from 1121 to 1220 mm from 1121 to 1220 mm from 1036 to 1135 mm L 1130 mm
from 1221 to 1320 mm from 1221 to 1320 mm from 1136 to 1235 mm L 1230 mm
from 1321 to 1340 mm from 1321 to 1330 mm from 1236 to 1330 mm L 1330 mm

38
Roofing - Drip-steel profile - Protective plates
For NINZ doors

ROOFING L = FM L +140 L = FM L +140

175

fire doors
PROGET
Upon request for Univer and Proget doors, to be ordered
together with the door.

110
Conceived for exterior use of metallic doors, the roofing
protects against infiltration of rain from above between
the door edge and the rebate of the frame. The small
potrusion and RAL painting for exterior use in the same
color of the frame complete the design of the door.
To be applied onto the wall, in contact with transom.
Made out of galvanized sheet metal with thickness
10/10 mm, painted with RAL for exterior use (in the frame
color), complete with holes for fixing to the wall (screws
and plugs excluded). Available for doors with FM L from ATTENTION
500 to 2660 mm (supplied in two elements for FM L > The roofing performs the function of a barrier against
2360 mm). vertical rain limited to the upper part of the door. There-
fore the roofing does not protect any eventual window
or ventilation louvers on the door, so for these cases pro-
vide canopies or awnings for a complete protection of the
product.

DRIP-STEEL PROFILE

On request for Univer and Proget one-leaved doors. Nor-

26
mally used to prevent condensation from dripping down
the door leaf and puddling beneath the door. The profile
is made of “Sendzimir” processed galvanized sheet metal
painted the color of the door leaf.

29
It is applied usually on the push side of the leaf on site after
being cut to measure, to be attached with the screws pro-
vided.

Lengths available FM L door leaf

828 mm to 800 mm
928 mm to 900 mm
1028 mm to 1000 mm
1378 mm to 1350 mm

PROTECTIVE PLATES AND KICKPLATES

On request for 1 and 2 leaf Univer and Proget doors, speci-

fying the side of application (pull or push).
Their main function is to protect the parts of the door that
are vulnerable to being scraped by carts, hospital beds,
etc.
They are made of AISI 304 brushed stainless steel sheet
metal with a standard height of 230 mm.
For on-site attachment with two-sided adhesive factory
applied on the back, at the bottom of the door (kick plate)
or at handle height (protective plate). Holes are factory prepared for the passage of the handle panel and cylinder
230
230
230
230

230
230

230
230

Protection plates Kick plates Example of application on the push side

39
 Wall screws - Subframe
For NINZ doors

WALL SCREWS FOR FASTENING WITHOUT PLUGS

fire doors
PROGET

Field of use: installation of Proget insulated or multipur-

pose doorframes to the wall or subframe using screws but

50
60
no plugs. Designed for installation into concrete, full bricks,
half-full bricks, lightened cement and other materials.

80
100
Advantages: saves time and money thanks to direct attach-
ment of the frame to the wall, with no need to enlarge
the holes for plugs. Thanks to the black galvanization, the
screws blend in smoothly with the FC sealing.

Dimensions description
Ø 7,5 x 50 mm for attachment to metal subframes
Ø 7,5 x 60 mm for attachment to concrete and especially thick walls
Ø 7,5 x 80 mm for attachment to walls of average thickness
Ø 7,5 x 100 mm for attachment to walls of lower thickness

NOTE
Holes should be drilled using a Ø6mm stone drill bit.

SUBFRAME

10
Subframe made of 30x15x1,5mm hollow section profiles,
derived from hot-galvanized steel coil, endowed with an-
chors for mortar fixing and removable spacers for the final
installation.

Required wall opening = FM H + 15

Wall opening for the door order FM H
To be ordered separately (mandatory for REI 60 and
REI 120 Proget doors with installation onto subframe with
screws).

10 10

Wall opening for the door order FM L

Required wall opening = FM L + 30 FFL

Horizontal cross section Vertical cross section

40
MAC® Multifunctional Access Control
Controlled opening system

Installation on the door of MAC and MAC FAILSAFE sys-

fire doors
PROGET
tems allows to control access by electric impulse.
The particularity of the MAC and MAC FAILSAFE system
is to integrate all command and control functions in the
lock, which simplifies the electrical works required on site.

Differences between MAC and MAC FAILSAFE systems:

- the MAC systems, in the event of a power failure, al-
low the opening only via key or panic/emergency exit
device. Thus MAC systems are recommended in situa-
tions where the door shall remain closed, even in case
of power failure. Plastic handle with LEDs Stainless steel handle with LEDs
- the MAC FAILSAFE systems guarantee access in the situ-
ation of power failure. Thus MAC FAILSAFE systems are
recommended in situations where free passage must be
assured, even in case of power failure.

The MAC system offers multiple advantages, such as:

- possibility of 12 or 24V AC/DC power supplies, which
avoids problems due to inadequate voltage
- low current absorption:
- at 12V the startup current is 500mA for the first 5-6 sec.,
before changing to a 250mA maintenance current
- at 24V the startup current is 1A for 300 millisec., be-
fore settling to 500mA for 4-5 sec. and finally chang-
ing to a 250mA maintenance current for the remain-
ing 25 sec.
- timer incorporated, time set at 30 sec., eliminating the
need for external timers. Further, in case of delivery with Double electrical contacts between
the door with automatic reset function (reset of the tim- leaf and doorframe
er) for every door opening
- red/green LED on the cover plate to prevent useless forc-
ing of the handle by signaling whether the opening sys-
tem is active or not
- possibility of continuous handle activation (always open 6
when desired) 5
- ready for the connection of a optional remote LED (not 5
supplied) for remote signaling of lock activation/deac-
tivation 4 3 6
- guaranteed access in case of power failure (only for 4
FAILSAFE version)

The MAC and MAC FAILSAFE systems can be delivered 2

installed onto the door with internal wiring through the 1 2
leaf and electrical contacts between the leaf and the door-
3
frame. The KIT includes a flexible cable sleeve and the elec- Diagram of components
trical cables are to be installed externally.

Delivery together with the door features these installed accessories: lock with
NOTE solenoid and electronic chip with timer incorporated (1), double electrical con-
Before the installation of doors with MAC locks it is nec- tacts between leaf and frame (2), internal wiring inside the leaf (3); supplied
essary to prepare the power supply (active door leaf side to be installed: handle and cover plate with red/green LED and connectors (4).
in case of double leaved doors) at a height of approx. Not included: power supply for doorframe contacts (5), opening button and
800mm from the finished floor level and in proximity of command accessories (6).
the wall angle, where the door frame will be mounted. Unlike the delivery together with the door, the KIT (supplied separately from the
The power wires must have a section of 0,75-1,0mm2 and door) offers a flexible cable sleeve between the door leaf and the power supply
must be flexible. instead of the double electrical contacts. In case of a handle the installation of
a cable duct onto the door leaf (not supplied) is necessary for the power supply.

41
 MAC® Multifunctional Access Control
Controlled opening system

MAC1 AND MAC1 FAILSAFE SYSTEM MAC2 AND MAC2 FAILSAFE SYSTEM
fire doors
PROGET

Door opening in case of power failure (LED off) Door opening in case of power failure (LED off)
-- MAC1: from pull side only by key; from push side by -- MAC2: from both sides by key only.
panic bar or emergency handle. -- MAC2 FAILSAFE: from both sides by handle (or key).
-- MAC1 FAILSAFE: from pull side by handle (or key); from
push side by panic bar or emergency handle.

Operating mode Operating mode

The system controls access from the pull side of the door. The system controls access from both sides of the door.
With the lock locked by key, the access consent is possi- With the lock locked by key, the access consent is possi-
ble via electric impulse (button, badge reader, etc.), which ble via electric impulse (button, badge reader, etc.), which
gives power supply in case of MAC1 or it turn off in case gives power supply in case of MAC2 or it turn off in case of
of MAC1 FAILSAFE, while opening is always possible from MAC2 FAILSAFE. Activation of both handles is signaled by
the push side by means of the panic bar or emergency illumination of the “green LED,” with the “red LED” sign-
handle. Activation of the handle is signaled by illumina- aling when the handles are idle. Both LEDs are off when
tion of the “green LED,” while the “red LED” indicates no power is being supplied.
when the handle is idle. Both LEDs are off when no power
is being supplied.

Timed function Timed function

In this mode, the activation time lasts 30 seconds before In this mode, the activation time lasts 30 seconds before
the handle is returned to idle. In case of delivery with the both handles are returned to idle. In case of delivery with
door, if the door is opened within the 30 seconds, the tim- the door, if the door is opened within the 30 seconds, the
er is automatically reset to zero. timer is automatically reset to zero.

Continuous “day time” function Continuous “day time” function

In this mode the handle is continuously enabled by an In this mode both handles are continuously enabled by
electric switch (not supplied) for a longer period (for ex- an electric switch (not supplied) for a longer period (for
ample during the day), which keeps the lock always ena- example during the day), which keeps the lock always en-
bled. The green LED remains switched on (not valid for abled. The green LEDs remain switched on (not valid for
the “Kit” version) and is switched off only for the period the “Kit” version) and are switched off only for the period
between the door’s opening and its fully closure. between the door’s opening and its fully closure.

MAC1 can be combined with any BM type panic bar and M3 MAC2 standard delivery with M1 plastic handle. Upon re-
emergency handles (to be ordered on the side). quest an M1X stainless steel handle can be delivered (to be
ordered on the side).

EX DC BM EX/TW BM SL BM M3 M1

42
MAC® Multifunctional Access Control
Controlled opening system

MAC3 AND MAC3 FAILSAFE SYSTEM NOTE

fire doors
PROGET
Before the installation of doors with MAC locks it is ne-
cessary to prepare the power supply (active door leaf side
Door opening in case of power failure (LED off) in case of double leaved doors) at a height of approx.
-- MAC3: from push side only by key; from pull side by the 800mm from the finished floor level and in proximity of
M3tir/M3Xtir emergency handle.
the wall angle, where the door frame will be mounted.
-- MAC3 FAILSAFE: from push side by handle (or key);
The power wires must have a section of 0,75-1,0mm2 and
from pull side by the M3tir/M3Xtir emergency handle.
must be flexible.

Operating mode
The system controls access from the push side of the door.
With the lock locked by key, the access consent is possi-
ble via electric impulse (button, badge reader, etc.), which
gives power supply in case of MAC3 or it turn off in case of
MAC3 FAILSAFE, while opening is always possible from the
pull side by means of the emergency handle. Activation
of the handle is signaled by illumination of the “green
LED,” while the “red LED” indicates when the handle is
idle. Both LEDs are off when no power is being supplied.

Timed function
In this mode, the activation time lasts 30 seconds before
the handle is returned to idle. In case of delivery with the
door, if the door is opened within the 30 seconds, the tim-
er is automatically reset to zero.

Continuous “day time” function

In this mode the handle is continuously enabled by an
electric switch (not supplied) for a longer period (for ex-
ample during the day), which keeps the lock always ena-
bled. The green LED remains switched on (not valid for
the “Kit” version) and is switched off only for the period
between the door’s opening and its fully closure.

MAC3 standard delivery with M3tir plastic handle. Upon re-

quest an M3Xtir stainless steel handle can be delivered (to
be ordered on the side).

M3tir

43
 Electric handles
Controlled opening system

ELM/MT MULTI-VOLTAGE ELECTRIC HANDLE 19 125

fire doors
PROGET

Controlled door opening system that employs an elec-

tronic device to activate the handle. The latter is equipped
with an internal timer with a 30 seconds time allowance

72
225
for opening the door, after which the electric handle is
deactivated. The handle can be activated for longer time
periods by means of the electrical switch.
The illumination of a green LED and sounding of an acous- Ø20
tic signal (buzzer) indicate handle activation, while a red
LED indicates deactivation.

82
When ordered together with the door, the ELM/mt system
includes:
electric handle, electrical contacts between the leaf and Technical data
the frame, power cable inside the door connected to elec-
power supply 12-24V AC/DC
trical contacts, command panel, lock and fixing screws.
current absorbed at 12 V: 500 mA - at 24 V: 200 mA
If ordered separately from the door, the system includes: startup current at 12 V: 700 mA - at 24 V: 300 mA
electric handle, command panel and fixing screws. minimum operating temperature -5°C

ELM/CISA MULTI-VOLTAGE ELECTRIC HANDLE 141.5 75

Controlled door opening system that employs an electron-

ic device to activate the handle. Equipped with a separate

190
257
timer (for insertion into the switch box) which can be set
for different opening times: from a minimum of 0,1 sec-

72
ond to a maximum of 10 days.
Equipped with green LED that signal activation of the
handle.
38 33
The ELM/cisa system includes: electric handles, 2 meters of
power cable, cable sleeve for the connection between the
leaf and the frame, 8/9 square spindle, fixing screws, ad-
justable timer packaged separately.w Technical data
power supply 12-24V AC/DC
current absorbed: 360 mA - startup: 800 mA
operational temperature -20°C ÷ +80°C

PANIC BARS FOR COMBINATION WITH

ELM/MT OR ELM/CISA ELECTRIC HANDLES

The controlled opening direction is from the pull side of

the door (electric handle side). Locking the lock by key
blocks the electric handle functioning, while opening is
still possible via the panic bar on the push side.
Use: one- or two-leaved doors for anti-panic exits when
access control is desired on the pull side.

Exus

Twist Slash

44
Electric handles - Electromagnetic sensor
Controlled opening system

HANDLES FOR COMBINATION WITH

fire doors
PROGET
ELM/MT OR ELM/CISA ELECTRIC HANDLES

MSC, MSC-X
Use: one- or two-leaved doors when control is desired for
one of the two opening directions. Locking with the key
blocks opening in both directions.
Controlled opening may be for either the push or pull
direction, depending on where the electric handle is ap-
plied.

MSC MCC/S
MCC/S, MCC/S-X
Use: for one- or two-leaved doors where access is to be
controlled from the pull side only (electric handle side).
Locking with the key blocks opening from the push side,
but not from the side where the electric handle is applied.

MCC/T, MCC/T-X
Use: for one- or two-leaved doors where access is to be
controlled from the push side only (electric handle side).
Locking with the key blocks opening from the pull side,
but not from the side where the electric handle is applied.
MCC/T

EMERGENCY HANDLES FOR COMBINATION WITH

ELM/MT ELECTRIC HANDLE

M3, M3X
Use: one- or two-leaved doors for emergency exits when
access control is desired on the pull side.
The controlled opening direction is from the pull side of
the door (electric handle side). Locking the lock by key
blocks the operation of the electric handle, while opening
remains possible via the M3 or M3X emergency handle.

M3 HOT-CIL
HOT-CIL, HOT-CIL-X
Use: for hotel rooms doors.
The controlled opening direction is from the push side of
the door (electric handle side). Opening from push side
is possible with an electric consent at the electric handle.
Opening is always possible from the room side of the door
via the HOT-CIL or HOT-CIL-X emergency handle, also in
case of lock locked by thumbturn latch.

ELECTROMAGNETIC SENSOR 5

The electromagnetic sensor allows to verify the position

4 max.

of the door leaf. To be applied to the door, composed of

two elements: one electromagnetic sensor with two ca-
bles and one magnet.
16

Technical data
maximum voltage 200 V DC / 500 mA with resistive load 60
internal switch contact n.o. (n.c. with magnet aligned)
operational temperature +5 / +40 °C

45
 Door blocking electromagnet
Controlled opening system

DOOR BLOCKING ELECTROMAGNET 01

fire doors
PROGET

This system is for use in special situations when the doors

remain closed and should only be opened with electrical
consent. The electrically powered electromagnet holds the
door closed with a holding force of approximately 300kg,
rendering the action of the handle ineffective. Only elec-
trical commands (badge reader, key button, etc.) or elec-
trical consent from the fire detector system can deactivate 02
the electromagnet making a door opening possible. 03

Operating mode
The door is held closed by the electromagnet (01) and the 04
bolt of the lock. Opening from the outside can happen via
magnetic card (04) using the Badge reader (02) of the card
control system or any other system of choice and by retract-
ing the bolt using the handle or key.
From the inside, the deactivation of the electromagnet is
caused by the unlock button (03) (also remotely) or with
the same system used for the pull side, while the locking
bolt must still be retracted using the handle or key. The
activated electromagnet signals its state with a red LED,
whereas the green LED signals the temporary deactivation. NOTE
Further a relay AC/DC signaling the electromagnetic state Unlocking of the door is only possible if the door is not locked
is supplied. by key.

Technical data
power supply 12/24V DC time delay 0 ÷ 90 sec.
current absorbed 500mA at 12V DC - 250mA at 24V DC electromagnetic compatibility standard EMC - UNI CEI 70011
force up to 300kg. certificate Nr. 0123/02

COMPONENTS INCLUDED WITH THE DOOR BLOCKING

ELECTROMAGNET

For Proget doors

Door blocking electromagnet, withstanding force 300kg,
12/24V DC, fastener plate, anchor with stainless steel fas-
tener backplate.

For Rever/Univer doors

Door blocking electromagnet, withstanding force 300kg,
12/24V DC, fastener plate and angle bar, anchor with PROGET electromagnet REVER/UNIVER electromagnet
stainless steel fastener backplate.

Control system:
- “Access” code keypad
- Card-based control system
- Biometric fingerprint reader
- Unlock button

NOTE
Detailed specifications for the Control system are found
on the “Command accessories” page.

46
Power supply/command accessories
For MAC®- ELM/mt- ELM/cisa- Door blocking electromagnet-controlled opening systems

CONTROL SYSTEMS AND RELATED ACCESSORIES

fire doors
PROGET
“Access” code keypad
Keypad with 10 numeric buttons plus an Enter key, includ-
ing control unit for 1 door, timer incorporated (0,5÷25 sec.)
and flat cable. Up to 500 recordable different codes, com-
posed from 1 to 10 digits.

Technical data
power supply 12 ÷ 18 V AC/DC
output relay „Access“ code keypad

Card-based control system

Card control system, including control unit for 1 door, tim-
er and AC adapter incorporated, badge reader, flat cable,
three blank badges and a coded badge. Management of
access control for multiple doors by P.C.

Technical data
power supply 230 V AC
output 12 V DC, max. 0,5 A

Card-based control system

Biometric fingerprint reader

Biometric reader for reading of fingerprints and transfor-
mation into key codes. Includes an internal unit for regis-
tering, memorizing and cancelling users, external unit for
the reading of fingerprints and an autonomous low volt-
age AC adapter. The power supply for the management
of the door is not included.

Technical data
power supply 230 V AC
output relay
Biometric fingerprint reader

Unlock button
Unlock button with white casing and control light.

Power supply Switching

Can be combined with “Access code keypad”, with “Bio-
metric fingerprint reader” and for the management of:
- max. Nr. 10 MAC® Multifunction Access Control *
- or max. Nr. 5 Electromagnets door blocking
- or max. Nr. 5 ELM/mt Electric handles *
- or max. Nr. 8 ELM/cisa Electric handles *
Unlock button Power supply switching
* provided that they are not commanded simultaneously

Technical data
power supply 230 V AC
output 12 V DC - 3 A

NOTE
It is possible to wire a couple of buffer batteries to the
power supply switching (see “Door-holding systems”).

47
 Door-holding systems
For fire doors and gates

C2 MONO-ZONE CENTRAL UNIT

fire doors

240
PROGET

Certified in accordance with EN 54-2 and EN 54-4 standards.

The central unit designed and built in conformity with UNI
EN 54 standards, which regulate unit for fire alarms and
related accessories which each must conform with EN 54

150
standards.
To use for the management of the door-holding electro-
magnets for fire-rated closures. Control all outputs to-
wards the heat and smoke detectors, the alarm activation/ 48
reset buttons, the external siren and the charge of buffer
batteries. Any breakdown or manlfunction is signaled by
LED on the front panel, and by internal acoustic signal
for specific cases. There are three ways to reset alarm or
breakdown signal: by a button located near the central ATTENTION
unit, or by two other buttons of the front panel, one of According to standard EN 54-4, it is obligatory for the mo-
which can be activated with key only. no-zone central unit to be equipped with:
- Nr. 1 heat/smoke detector RFC certif. EN 54-7
- Nr. 1 pair of buffer batteries
- Nr. 1 external electronic siren certif. EN 54-3
- Nr. 1 alarm activation button certif. EN 54/11
Technical data - Nr. 1 fire/failure alarm deactivation button
model 52002
primary power supply 230V AC, 100mA, 50-60Hz
auxiliary power supply 2 batteries, 12V DC - 1,1 ÷ 1,3 Ah
MANAGES
„I“ current min. 264mA ÷ max. 424mA - max. Nr. 5 RFC heat/smoke detectors
maximum output current battery 300mA - max. Nr. 5 alarm activation buttons
buffer battery charger output 24V DC (27.6V DC) - max. Nr. 2 electronic sirens
- Nr. 4 EM or EMP or EMr electromagnets
protection rating IP30 - Nr. 2 buffer batteries
operational temperature -5°C ÷ +40°C
operational zones single zone (mono-zone)
acoustic alarm internal buzzer
"low battery" signal intermittent internal buzzer
CE certification 0051-CPD-0264
EN 54-2 +A1:2006
conformity with standards
EN 54-4:1997 + A1:2002 + A1:2006

BUFFER BATTERIES

Pair of rechargeable buffer batteries, 12V DC - 1.2Ah

48
Door-holding systems
For fire doors and gates

RFC HEAT AND SMOKE DETECTOR Ø110

fire doors
PROGET
Certified in accordance with EN 54-7 standard.
RFC heat and smoke detector characterized by white ABS
casing. Optical/thermic operation with intervention tem-
perature to be set between 54 and 65°C. To ensure proper

54
functioning, the detectors must be subjected to regular
6-month maintenance checks. Please note that it is inad-
visable to position the sensor where strong air currents
are present.

Technical data
operational voltage 11 ÷ 33V DC, typically 24V DC
consumption at rest, at 24V DC 67μA
absorption of alarm at 24V DC 45mA
operational temperature -20°C ÷ +70°C
conformity with standards EN 54-7

ELECTRONIC SIREN

In red color ABS, includes a volume control function for

installation in internal and external environments. The
connection is made using double clamps (6) for branch-

91
ing. With 28 or 32 selectable tones and a second tone for
two-phase alarms.

Technical data
power supply 9 ÷ 28V DC
Ø91
absorption by alarm at 12V DC 8mA
absorption by alarm at 24V DC 16mA
protection rating IP65
operational temperature -25°C ÷ +70°C
conformity with standard EN 54-3

ALARM ACTIVATION BUTTON

43
In red color ABS with a weight of 110 gr. Pressure on the
plastic front plate activates the electrical contact. Re-
arming of the contact is executed manually using a key
95

(provided).

Technical data
power supply max. 30V DC
99
protection rating IP41
operational temperature max. +65°C
internal exchange contact n.o./n.c.
conformity with standard EN 54-11

49
 Door-holding systems
For fire doors and gates

ELECTROMAGNETS
fire doors
PROGET

EM wall mounted
EM wall electromagnet with white plastic casing,
consisting of a galvanized metal core, both complete with
unlock button. Anchor consisting of a nickel-plated plate
and jointed baseboard.

Technical data EM - EMP

power supply 24V DC
absorption 60mA 75 53
65
force 50kg. 35
CE certification 0407-CPD-011 (IG-098-2004) /04

90
65
conformity with standard EN 1155

EM anchor

EMP floor mounted

EMP floor electromagnets consisting of a galvanized

metal core, both complete with unlock button. Anchor
consisting of a nickel-plated plate and jointed baseboard.

70 53
65
65
114

104

EMP anchor

EMr with release by pulling

EMr electromagnet does not feature an unlock button as

the unlocking is to be done manually by pulling the leaf.
The holding force is 50kg, while the release force may be
set between 4 and 12kg. This avoid damaging the fixure
of the electromagnet on the wall (ripping off the plugs)
in particular when mounted onto plasterboard. Housing
made of stainless steel.

Technical data
electromagnet overall dimensions Ø 90 - H 40 mm
anchor protrusion H 40 or H 80 mm
power supply - absorption 24V DC - 60mA
force - release force 50kg. - settable between 4 and 12kg.
CE certification 0407-CPD-095 (IG-208-2006)
conformity with standard EN 1155

50
Door-holding systems
For fire doors

ELECTROMAGNETIC DOOR HOLD-OPEN DEVICE

fire doors
PROGET
The electromagnetic and wireless door hold-open device,
is powered by batteries (supplied) and activated by the
fire detection alarm system.
To be applied onto the lower corner of the door leaf, on
the push side, allows to hold open the door leaf at any
angle between 65° to 180°. Activated simply by foot by
fixation of the blocking piston against a floor catch.
Automatic release of the door leaf in the event of fire
alarm via acoustic signal of 65 dB with duration of at least
20 seconds.
Adjustable sensitivity to allow correct operation in the en- 195
vironment where installed. 45
Installation of an additional stainless steel kick plate (see

205
dedicated page) on the side of its application is advisable,
to protect the painted surface of the door leaf and to re-
inforce the fixing of the device.

150
Technical data

4,5
2 long-life alkaline batteries (supplied)
power supply
duration of 12 month approx.
activation signal intensity: 65 dB - duration: at least 20 seconds 77
adjustable sensitivity of the activation signal,
62,5
complementary functions programmable automatic night-time release at
pre-set time, weekly automated test
CE certification AE0021
conformity with standard EN 1155

51
 Emergency handles
NINZ
fire doors
PROGET

“safety is in
your hands“

52
PRESENTATION

fire doors
PROGET
Emergency exit devices (emergency handles)
Ninz S.p.A. is a leader in fire doors, and has once again re-
asserted itself as a visionary company with a strong iden-
tity created by its continuous research into the design and
technology of its own products, such as the new line of
emergency exit handles.
The handles are marked and pre-certified according
to European standard EN 179:2008, which entered in ef-
fect January 01, 2010, and which prescribes a several sub-
stantial changes that further extend the requirements for
maximum safety and ease of opening.

The Kit designed for your needs

When ordered separately from the door, the M3, M3X,
M14, M14X, Hot CIL and HOT CIL-X handles are packaged
in functional KITs for display and presentation in the most
appropriate distribution context.
Packaging in KITs ensures customers, installers and there-
fore the final users that they are receiving a complete
anti-panic system with fully corresponding and certi-
fied parts.

Certifications and replacements

Given the importance of maintaining the entire system’s
conformity, special attention has been paid to replace-
ment parts, which have been subjected to testing in ac-
cordance with the EN 179:2008 standard due to their piv-
otal role in maintaining certification.
The only way to ensure that the products maintain their
original characteristics over time is by using original NINZ
replacement parts.
For this reason, the instructions for emergency handles in-
clude additional indications regarding proper installation
and maintenance plus a exploded assembly drawing that
specifies every smallest detail of the certified system with all
of the references required for ordering replacement parts.

53
 M3 emergency handle
Emergency handle for internal locks - EN 179:2008

M3 IN BLACK PLASTIC 23 124

fire doors
PROGET

Description
Lever handle for emergency exit:

166

72
- Reversible for right or left opening
- Applicable to single leaf doors or the active leaf (main
leaf) of two-leaved doors located at emergency exits Ø20
- Suitable for Rever/Univer/Proget doors and other types
of emergency exit doors

67
- Both the levers and the cover plates are made of black
plastic, and the core of the lever and the installation
plate are made of galvanized steel
- The lock is anti-panic/fire rated for European profile cyl-
inders
- Cylinder to pass in nickel-plated brass with 3 keys SUPPLIED TOGETHER WITH THE DOOR
- Suitable for doors with dimensions up to 1350 x
2880mm/leaf, mass up to 300kg/leaf, with ratings up to For single leaf or the active leaf of two-leaved doors:
EI2120 - REI120 and smoke resistance, handle protrusion Included (mounted on the door): anti-panic lock with
of 67mm 65mm entrance and the strike box insert.
Included (in the package): Nr. 2 black plastic lever handles,
Nr. 2 galvanized steel installation plates, Nr. 2 black plas-
Use tic cover plates, Nr. 1 split square spindle, Nr. 1 standard
The M3 lever handle for emergency exits is for use on nickel-plated cylinder to pass with 3 keys, Nr. 1 adhesive
doors designated for emergency situations involving peo- pictogram (green arrow), Nr. 1 instruction/maintenance
ple who are accustomed to using safety exits and their manual.
hardware, and who are therefore unlikely to be in a state Versions available: M3, M3 ELM/mt.
of panic. ELM electric handle: see the dedicated pages

Operating mode
With the lock locked by key, the door can no longer be
opened from the pull side, while the door can still be M3 KIT VERSION
opened using the lever on the push side. (SUPPLIED SEPARATELY FROM THE DOOR)
KIT for single leaf or the active leaf of two-leaved doors:
Specify the leaf thickness in the order.
VERSIONS AVAILABLE KIT contents: Nr. 1 anti-panic lock with 65mm entrance,
Nr. 1 strike box insert, Nr. 2 black plastic lever handles,
Nr. 2 galvanized steel installation plates, Nr. 2 black plas-
tic cover plates, Nr. 1 split square spindle, Nr. 1 standard
nickel-plated cylinder to pass with 3 keys, Nr. 1 adhesive
pictogram (green arrow), Nr. 1 instruction/maintenance
manual.
M3 M3 ELM/mt Versions available: M3

VARIATIONS ON REQUEST

- MAC1 type panic lock, including access control mode

- Panic lock with 3 closing points (for multipurpose PRO-
GET doors only)
- Mastered or coded cylinders

54
M3X emergency handle
Emergency handle for internal locks - EN 179:2008

M3X IN STAINLESS STEEL 23 130

fire doors
PROGET
Description
Lever handle for emergency exit:

166

72
- Reversible for right or left opening
- Applicable to single leaf doors or the active leaf (main
leaf) of two-leaved doors located at emergency exits Ø20
- Suitable for Rever/Univer/Proget doors and other types
of emergency exit doors

67
- The levers as well as the cover plates are made of AISI
304 brushed stainless steel, and the installation plates
are made of galvanized steel
- The lock is anti-panic/fire rated for Euro profile cylinders
- Cylinder to pass in nickel-plated brass with 3 keys
- Suitable for doors with dimensions up to 1350 x SUPPLIED TOGETHER WITH THE DOOR
2880mm/leaf, mass up to 300kg/leaf, with fire resist-
ance up to EI2120 - REI120 and smoke resistance, handle For single leaf or the active leaf of two-leaved doors:
protrusion of 67mm Included (mounted on the door): anti-panic lock with
65mm entrance and the strike box insert.
Included (in the package): Nr. 2 lever handles in brushed
stainless steel, Nr. 2 galvanized steel installation plates,
Use Nr. 2 cover plates in brushed stainless steel, Nr. 1 split
The M3X emergency exit handle are to be applied on square spindle, Nr. 1 standard nickel-plated cylinder to
doors designated for emergency situations in which the pass with 3 keys, fastener screws, Nr. 1 adhesive pictogram
people involved are accustomed to using safety exits and (green arrow), Nr. 1 instruction/maintenance manual.
their opening devices, and therefore who are very unlike- Versions available: M3X, M3X ELM/mt.
ly to be in a state of panic. ELM electric handle: see the dedicated pages

Operating mode
With the lock locked by key, the door can no longer
be opened from the pull side, but the door can still be M3X KIT VERSION
opened from the push side using the handle. (SUPPLIED SEPARATELY FROM THE DOOR)

KIT for single leaf or the active leaf of two-leaved doors:

VERSIONS AVAILABLE Specify the leaf thickness in the order.
KIT contents: Nr. 1 anti-panic lock with 65mm entrance,
Nr. 1 strike box insert, Nr. 2 lever handles in brushed stain-
less steel, Nr. 2 galvanized steel installation plates, Nr. 2
cover plates in brushed stainless steel, Nr. 1 split square
spindle, Nr. 1 standard nickel-plated cylinder to pass with
3 keys, fastener screws, Nr. 1 adhesive pictogram (green
arrow), Nr. 1 instruction/maintenance manual.
M3X M3X ELM/mt
Versions available: M3X

VARIATIONS ON REQUEST

- MAC1 panic lock, including access control system

- Panic lock with 3 closing points (for multipurpose PRO-
GET doors only)
- Mastered or coded cylinders

55
 Certifications
Emergency handle for internal locks - EN 179:2008

M3, M3X CERTIFICATIONS

ATTESTATO
ATTESTAT DI CONFORMITÀ
CONFORMIT
TÀ
fire doors

!
PROGET

Suitable for one-leaved doors or the active leaf of two- DIRETTIVA 89 /1 0 6/CE E

CERTIFICATE OF CONFORMITY
!
leaved doors with dimensions up to 1350x2880mm/leaf CERT CONFORMI
MITY 0425

DIRECTIVE 89 /1 0 6/CE E
and a mass up to 300kg/leaf. Questo certificato è rilasciato in conformità a quanto prescritto dall’Art.6 par.2 lettera b) del DPR 21 aprile 1993, n°246 (Direttiva 89/106/CEE)
!

ed attesta la conformità del prodotto di seguito identificato agli Art.1, Art.2 ed allegato A del DPR 21 aprile 1993, n°246 (Direttiva 89/106/CEE)
This certificate is issued in accordance with the requirements defined in Article 6 par.2 lett. B) of DPR 21th April 1993, n° 246 (89/106/CE Directive) and
certifies the compliance of the product to art. 1, art. 2 and annex A of DPR 21th April 1993, n° 246 (89/106/CE Directive)
!
!

ATTESTAT O N° 2147 - CPD - 2010 CERTIFICATE N°

Organismo notificato Notified Body

M3, M3X DEVICE FOR ICIM S.p.A. - Piazza Don Mapelli, 75 – 20099 SESTO SAN GIOVANNI Identification number: 0425
Denomination
EMERGENCY EXITS Dati Fabbricante Manufacturer details
Sede legale NINZ S.p.A. Corso Trento, 2/A 38061 ALA (TN) ITALY Head office
Ninz S.p.A. Corso Trento, 2/A Unità operativa Production unit
Manufacturer
I-38061 ALA (TN)/ITALY Dati prodotto Product datails
Year application trademark 10 Tipologia DISPOSITIVI PER USCITE DI EMERGENZA AZIONATI MEDIANTE MANIGLIA A Type
LEVA O PIASTRA A SPINTA
Nr. and year of the standard EN 179:2008 EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD
Denominazione Dispositivo di emergenza serie “M3” “M3X” Denomination
Certifying body 0425 Serrature antipanico art. AP16/18, 3201001.018, SCA 1 3201001.019/020,
MAC 1 3201001.041/042
certificate Nr. 2147-CPD-2010 Coppia di deviatori art. 4201010

Classification 377B1442AA Riscontro serratura art. 2401006, 2401005, 2401015, 2401014, 2401035,
3412001
Aste verticali art. 3305013
Comandi art. 3101001.009 (M3), 3101017.003 (M3X)

1st Category of use very frequent Sistema di attestazione della conformità 1 System of attestation of conformity
Norma di riferimento EN 179:2008 Standard reference
2nd Durability 200.000 cycles Classificazione 3 7 7 B 1 4 4 2 A A Classification
3rd Door mass over 200 kg Eventuali estensioni Nessuna / None Extensions
4th Suitable for fire/smoke rated doors
Eventuali condizioni di Condition of
5th Safety, suitable for evacuation routes subordine della Nessuna / None subordination of CE
Certificazione CE certification
6th High corrosion resistance 240 h
7th Material safety 1000 N Il presente attestato è valido esclusivamente per il prodotto indicato. Eventuali varianti da apportare devono essere approvate da ICIM SpA
The present certificate is valid only for the product described above. Every change has to be approved by ICIM S.p.A.
8th Handle protrusion up to 100 mm !

9th Activation type with lever handle Data di emissione Emissione corrente Data di scadenza ICIM S.p.A.
Issue date Current issue Expiring date
10th Suitable for one- or two-leaved doors ! !
Il Presidente
Ing. Tullio Badino
12/03/2010 !
12/03/2010! !
11/03/2020
!

56
HOT-CIL emergency handle
Emergency handle for internal locks - EN 179:2008

HOT-CIL IN BLACK PLASTIC

fire doors
PROGET
Description
Lever handle and fixed doorknob for emergency exits, es-
pecially for hotel rooms:
- Reversible for right or left opening
- Normally applied on single leaf doors or the active leaf
of two-leaved doors if the inactive leaf normally re-
mains closed and can only be opened manually with the
latch bolt (019)
- Suitable for Rever/Univer/Proget doors and other types
of emergency exit pull doors 46 23 124
- The lever, doorknob and even the cover plates are made
of black plastic, while the core of the lever and the in-

52
stallation plates are made of galvanized steel

166

72
- The lock is anti-panic/fire rated pull type for Euro profile
cylinders
- Mastered cylinder to pass with thumbturn latch on the Ø20
pull side made of nickel-plated brass with 3 keys
- Suitable for doors with dimensions up to 1350 x

67
40
2880mm/leaf, mass up to 300kg/leaf, with fire rating
8.5

EI2120 - REI120 and smoke resistance, handle protrusion

of 67mm

Use
The HOT-CIL emergency exit handle is to be applied on SUPPLIED TOGETHER WITH THE DOOR
doors designated for emergency situations in which the
people involved are accustomed to using safety exits and For the single leaf or active leaf of two-leaved doors (the in-
their opening devices, and who are therefore very unlike- active leaf normally remains closed and can only be opened
ly to be in a state of panic. manually using the bolt lock (019)):
Included (mounted on the door): the anti-panic lock with
Operating mode 65mm entrance and the strike box insert.
The door can be opened from the push side by key only, Included (in the package): Nr. 1 lever handle and Nr. 1
while it can be opened at any time from the pull side by fixed doorknob in black plastic, Nr. 2 galvanized steel in-
pressing the handle, even when the lock is locked using stallation plates, Nr. 2 black plastic cover plates, Nr. 1
the key. The lock has two bolts that protrude when the square spindle, Nr. 1 mastered cylinder with thumbturn
key or the thumbturn latch is turned. latch on the pull side made of nickel-plated brass with 3
keys, fastener screws, Nr. 1 adhesive pictogram (green ar-
row), Nr. 1 set of instructions for installation/maintenance.
VERSIONS AVAILABLE Versions available: HOT-CIL, HOT-CIL ELM/mt.
ELM electric handle: see the dedicated pages.

HOT-CIL KIT VERSION

(SUPPLIED SEPARATELY FROM THE DOOR)
HOT-CIL HOT-CIL ELM/mt
KIT for single leaf or the active leaf of two-leaved doors (the
inactive leaf normally remains closed and can only be
opened manually using the bolt lock (019)):
Specify the leaf thickness in the order.
KIT contents: Nr. 1 anti-panic lock with 65mm entrance,
Nr. 1 strike box insert, Nr. 1 lever handle and Nr. 1 fixed
doorknob in black plastic, Nr. 2 galvanized steel installa-
tion plates, Nr. 2 black plastic cover plates, Nr. 1 square
spindle, Nr. 1 mastered cylinder with thumbturn latch on
the pull side made of nickel-plated brass with 3 keys, fas-
tener screws, Nr. 1 adhesive pictogram (green arrow), Nr. 1
set of instructions for installation/maintenance.
Versions available: HOT-CIL

57
 HOT-CIL-X emergency handle
Emergency handle for internal locks - EN 179:2008

HOT-CIL-X IN STAINLESS STEEL

fire doors
PROGET

Description
Lever handle and fixed doorknob for emergency exits, es-
pecially for hotel rooms:
- Lever handle and fixed doorknob for emergency exits,
especially for hotel rooms:
- Reversible for right or left opening
- Normally applied on single leaf doors or the active leaf
of two-leaved doors if the inactive leaf normally re-
mains closed and can only be opened manually with the
latch bolt (019) 46 23 130
- Suitable for Rever/Univer/Proget doors and other types
of emergency exit pull doors
- The lever, doorknob and cover plates are made of AISI

49

166

72
304 brushed stainless steel, while the installation plates
are made of galvanized steel
- The lock is anti-panic/fire rated for Euro profile cylinders Ø20
- Mastered cylinder to pass with thumbturn latch on the
pull side made of nickel-plated brass with 3 keys

46

67
- Suitable for doors with dimensions up to 1350x 2880mm/

8.5
leaf, mass up to 300kg/leaf, fire rated to EI²120 - REI120
and smoke resistance, handle protrusion of 67mm

Use
The HOT-CIL-X emergency exit handle is for use on doors SUPPLIED TOGETHER WITH THE DOOR
designated for emergency situations in which the people
involved are accustomed to using safety exits and their For the single leaf or active leaf of two-leaved doors (the in-
opening devices, and who are therefore very unlikely to active leaf normally remains closed and can only be opened
be in a state of panic. manually using the bolt lock (019)):
Included (mounted on the door): the anti-panic lock with
Operating mode 65mm entrance and the strike plate insert.
The door can be opened from the push side by key only, Included (in the package): Nr. 1 lever handle and Nr. 1
while it can be opened at any time from the pull side by fixed doorknob in brushed stainless steel, Nr. 2 galvanized
pressing the handle, even when the lock is locked using steel installation plates, Nr. 2 cover plates in brushed stain-
the key. The lock has two bolts that protrude when the less steel, Nr. 1 square spindle, Nr. 1 mastered cylinder with
key or the thumbturn latch is turned. thumbturn latch on the pull side made of nickel-plated
brass with 3 keys, fastener screws, Nr. 1 adhesive picto-
gram (green arrow), Nr. 1 set of instructions for installa-
tion/maintenance.
VERSIONS AVAILABLE Versions available: HOT-CIL-X, HOT-CIL-X ELM/mt.
ELM electric handle: see the dedicated pages.

HOT-CIL-X KIT VERSION

(SUPPLIED SEPARATELY FROM THE DOOR)
HOT-CIL-X HOT-CIL-X ELM/mt
KIT for single leaf or the active leaf of two-leaved doors (the
inactive leaf normally remains closed and can only be
opened manually using the bolt lock (019)):
Specify the leaf thickness in the order.
KIT contents: Nr. 1 anti-panic lock with 65mm entrance,
Nr. 1 strike plate insert, Nr. 1 lever handle and Nr. 1 fixed
doorknob in brushed stainless steel, Nr. 2 galvanized steel
installation plates, Nr. 2 cover plates in brushed stainless
steel, Nr. 1 square spindle, Nr. 1 mastered cylinder with
thumbturn latch on the pull side made of nickel-plated brass
with 3 keys, fastener screws, Nr. 1 adhesive pictogram (green
arrow), Nr. 1 set of instructions for installation/maintenance.
Versions available: HOT-CIL-X

58
Certifications
Emergency handle for internal locks - EN 179:2008

HOT-CIL, HOT-CIL-X CERTIFICATION

fire doors
PROGET
Suitable for one-leaved doors or two-leaved doors with
the second leaf semi-fixed and not equipped with emer-
gency or anti-panic devices, with dimensions up to 1350x
2880mm/leaf, mass up to 300kg/leaf.

HOT-CIL, HOT-CIL-X
Denomination
EMERGENCY EXIT DEVICE
Ninz S.p.A. Corso Trento, 2/A
Manufacturer
I-38061 ALA (TN)/ITALY
Year application trademark 10
Nr. and year of the standard EN 179:2008
Certifying body 0425
certificate Nr. 0425-CPR-2149
Classification 377B1442AD

1st Category of use very frequent

2nd Durability 200.000 cycles
3rd Door mass over 200 kg
4th Suitable for fire/smoke rated doors
5th Safety, suitable for evacuation routes
6th High corrosion resistance 240 h
7th Material safety 1000 N
8th Handle protrusion up to 100 mm
9th Activation type with lever handle
10th Suited for one-leaved doors, pull opening

59
 M14 emergency handle
Emergency handle for insertion in lock - EN 179:2008

M14 IN BLACK PLASTIC 23 124 46 23 124

fire doors
PROGET

Description
Lever handle for emergency exit:
-- Reversible for right or left opening

166

166
-- For application to the inactive leaf of two-leaved doors
located at emergency exits Ø20
-- Suitable for Rever/Univer/Proget doors and other types Ø20
of emergency exit doors

67

67
-- The lever and cover plate are both made of black plas-

9

tic, while the core of the lever and the installation plate
are made of galvanized steel (with external installation version for Univer/Proget door version for Rever door
plate in case of Rever door)
-- The safety lock is anti-panic fire rated, activates the ver-
tical rods and ensures automatic closure SUPPLIED TOGETHER WITH THE DOOR
-- Suitable for doors with dimensions up to 1350x 2880mm/ For the inactive leaf of two-leaved doors:
leaf, mass up to 300kg/leaf, with fire rating EI2120 - Included (mounted on the door): anti-panic safety lock with 80mm
REI120 and smoke resistance, handle protrusion of 67mm entrance, vertical rods, upper locking device, upper strike plate.
Included (in the package): Nr. 1 black plastic lever handle with gal-
Use vanized steel installation plate and blank black plastic cover plate
The M14 emergency exit handle is to be applied to doors (with external installation plate for Rever doors), Nr. 1 square
designated for emergency situations in which the people spindle, Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm (for fire
involved are accustomed to using safety exits and their doors only), fastener screws, Nr. 1 adhesive pictogram (green ar-
opening devices, and who are therefore highly unlikely to row), Nr. 1 set of instructions for installation/maintenance.
be in a state of panic.
The active (main) leaf must also be equipped with an anti-
panic or emergency device. M14 KIT VERSION (SUPPLIED SEPARATELY FROM THE DOOR)
KIT for the inactive leaf of two-leaved doors:
Operating mode Please specify the door type - REVER, UNIVER or PROGET - in the order.
The M14 emergency device is always used in combination KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 1
with a second device for safety or emergency exits that is black plastic lever handle with galvanized steel installation plate and
applied to the active (main) leaf, and for this reason does blank black plastic cover plate (with external installation plate for
not include external opening door furnitures. Rever doors), Nr. 1 square spindle, Nr. 1 upper locking device (for Rever
From the push side, opening is possible at any time by and Univer multipurpose only), Nr. 1 carrier arm (excluding Rever and
pushing on the handle, which causes the vertical rods to Univer multipurpose doors), fastener screws, Nr. 1 adhesive pictogram
(green arrow), Nr. 1 set of instructions for installation/maintenance.
retract and at the same time pulls back the bolt of the ac-
tive leaf’s lock, unlatching both doors.

60
M14X emergency handle
Emergency handle for internal locks - EN 179:2008

M14X IN STAINLESS STEEL 23 130 46 23 130

fire doors
PROGET
Description
Lever handle for emergency exit:
- Reversible for right or left opening

166

166
- For application to the inactive leaf of two-leaved doors
located at emergency exits
- Suitable for Rever/Univer/Proget doors and other types Ø20 Ø20
of emergency exit doors
- The lever and cover plate are both made of AISI 304

8,5

8,5
67

67
brushed stainless steel, while the installation plate is
made of galvanized steel (with external installation version for Univer/Proget door version for Rever door
plate in case of Rever door)
- The safety lock is anti-panic/fire rated, activates the ver-
tical rods and ensures automatic closure SUPPLIED TOGETHER WITH THE DOOR
- Suitable for doors with dimensions up to 1350x2880mm/
leaf, mass up to 300kg/leaf, with fire rating EI2120 - For the inactive leaf of two-leaved doors:
REI120 and smoke resistance, handle protrusion of 67mm Included (mounted on the door): anti-panic safety lock with 80mm
entrance, vertical rods, upper locking device, upper strike plate.
Included (in the package): Nr. 1 lever handle in brushed stainless steel
Use
with galvanized steel installation plate and blank cover plate in
The M14X emergency exit handle is to be applied on doors
brushed stainless steel (with external installation plate for Rever
designated for emergency situations in which the people doors), Nr. 1 square spindle, Nr. 1 floor-mounted door catch, Nr. 1 car-
involved are accustomed to using safety exits and their rier arm (for fire doors only), fastener screws, Nr. 1 adhesive pictogram
opening devices, and who are therefore highly unlikely to (green arrow), Nr. 1 set of instructions for installation/maintenance.
be in a state of panic.
The active (main) leaf must also be equipped with an anti-
panic or emergency device. M14X KIT VERSION (SUPPLIED SEPARATELY FROM THE DOOR)
Operating mode KIT for the inactive leaf of two-leaved doors:
Please specify the door type - REVER, UNIVER or PROGET - in the order.
The M14X emergency device is always used in combina-
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 1 lever
tion with a second device for safety or emergency exits
handle in brushed stainless steel with galvanized steel installation plate
that is applied to the active leaf, and for this reason does and blank cover plate in brushed stainless steel (with external installation
not include external opening door furnitures. plate for Rever doors), Nr. 1 square spindle, Nr. 1 upper locking device (for
From the push side, opening is possible at any time by Rever and Univer multipurpose only), Nr. 1 carrier arm (excluding Rever
pushing on the handle, which causes the vertical rods to and Univer multipurpose doors), fastener screws, Nr. 1 adhesive picto-
retract and at the same time pulls back the bolt of the ac- gram (green arrow), Nr. 1 set of instructions for installation/maintenance.
tive leaf’s lock, unlatching both doors.

M14, M14X CERTIFICATION

Suited for the inactive leaf of two-leaved doors with di-
mensions up to 1350x2880mm/leaf, mass up to 300kg/leaf.

M14, M14X EMERGENCY EXIT

Denomination
DEVICE
Ninz S.p.A. Corso Trento, 2/A
Manufacturer
I-38061 ALA (TN)/ITALY
Year application trademark 10
Nr. and year of the standard EN 179:2008
Certifying body 0425
certificate Nr. 2148-CPD-2010
Classification 377B1442AC

1st Category of use very frequent

2nd Durability 200.000 cycles
3rd Door mass over 200 kg
4th Suitable for fire/smoke rated doors
5th Safety, suitable for evacuation routes
6th High corrosion resistance 240 h
7th Material safety 1000 N
8th Handle protrusion up to 100 mm
9th Activation type with lever handle
10th Suited for door: two-leaved, on the inactive leaf only

61
 PROGET
fire doors

62
Presentation
EXUS® panic bars

PRESENTATION

fire doors
PROGET
EXUS® panic bars
Ninz S.p.A. is a leader in fire doors, and has once again reas- With the new EXUS® panic bar, NINZ S.p.A. demon-
serted itself as a visionary company with a strong identity strates its willingness to believe in market develop-
created by its continuous research into the design and tech- ment by investing in designs and company image in
nology of its own products, such as the new line of EXUS® order to endow its own products with added value
panic bars. while maintaining highly competitive quality-price
The EXUS® panic bars are marked and according to Euro- ratios.
pean standard EN 1125:2008, which entered in effect Janu-
ary 01, 2010, and which prescribes a serious of substantial
changes that further extend the requirements for maximum
safety and ease of opening.

The KIT designed for your needs

When ordered separately from the door, the EXUS® series
of panic bars is provided in elegant and functional KITs
packaged for presentation in the most appropriate for-
mat for distribution.
Packaging in KITs ensures customers, installers and there-
fore the final users that they are receiving a complete an- Black PLASTIC handle Brushed STAINLESS STEEL handle
ti-panic system with fully corresponding parts which are
all certified.

NOTE
Finishing By default external door furniture is provided with the
Attention to detail and proportions are highlighted by se- same finishing as the panic bar.
lect materials and finishing.
In addition to the black PLASTIC version combined with
anodized ALUMINUM bars, new combinations include
the all brushed STAINLESS STEEL version and the pol-
ished chromed ALUMINUM version combined with the
anodized ALUMINUM bar. Many other color and surface
combinations are possible for equally aesthetic solutions.
The particular aesthetics of soft forms is one of the exclu-
sive advantages of EXUS® panic bars, representing the
fruit of designs generated in collaboration with Studio
MM Design, which has been working with the company
for many years.

Certifications and replacements

Given the importance of maintaining the entire system’s
conformity, special attention has been paid to replace-
ment parts, which have been subjected to testing in ac-
cordance with the EN 1125:2008 standard due to their piv-
otal role in maintaining certification.
The only way to ensure that the products maintain their
original characteristics over time is by using original NINZ
replacement parts.
For this reason, the instructions for EXUS® panic bars in-
clude additional indications regarding proper installation
and maintenance plus a exploded assembly drawing that
specifies every smallest detail of the certified system with all
of the references required for ordering replacement parts.

63
 EXUS® - Features, certifications
Panic bar

FEATURES
fire doors
PROGET

- Newly designed product with state of the art techno-

logical concept
- Available several in color and surface combinations:
brushed stainless steel for the lever arms and the bar, or
aluminum with polished chrome lever arms and ano-
dized aluminum bar, and finally the classic ever-green
combination - black plastic lever arms with anodized alu-
minum bar
- Certified for internal lock with 40 or 65mm entrances for
single leaves or active leaves, with 30 or 80mm entrance
for inactive leaves and with square spindle rotation of EXUS® is a registered trademark owned by Ninz S.p.A.
up to 45°
- Possibility of locking by key on the bar side as well
- Reversible for Right or Left mounting Also suited for doors with fire ratings:
- Protrusion 125mm
REI 30 REI 60EI2120 REI 90
smoke resistant
- Proposed together with the door or separately in a com-
plete KIT packaged in a black/yellow box
- Label applied to the packaging to identify the product‘s
characteristics
- Wide range of customizations: colored bar, colored or
stainless steel handles, lock with access control mecha-
nisms, special coded or mastered cylinders
40
200
95

125 38
max. 1237
(for hinged gates max. 1587)

CERTIFICATION

Suited for one-leaved doors or the active and inac-

tive leaves of two-leaved doors with dimensions up to
1350x2880mm/leaf, mass up to 300kg/leaf.

Denomination EXUS PANIC BAR

Ninz S.p.A. Corso Trento, 2/A
Manufacturer
I-38061 ALA (TN)/ITALY
Year application trademark 08
Nr. and year of the standard EN 1125:2008
Certifying body 0425
certificate Nr. 0425 CPD 1228
Classification 377B1321AA

1st Category of use very frequent

2nd Durability 200.000 cycles
3rd Door mass over 200 kg
4th Suitable for fire/smoke rated doors
5th Safety, suitable for evacuation routes
6th High corrosion resistance 96 h
7th Material safety 1000 N
8th Bar protrusion up to 150 mm
9th Activation type with push bar
10th Suited for one- or two-leaved doors

64
EXUS® LP BLACK PLASTIC
Panic bar for internal locks - EN 1125:2008

EXUS® LP IN BLACK PLASTIC EXUS LP (SUPPLIED WITH THE DOOR)

fire doors
PROGET
For single leaf or the active leaf of two-leaved doors:
Included (mounted on the door): the anti-panic lock with 65mm entrance
and the strike box lock insert
Included (in the package): Nr. 2 mechanisms, Nr. 2 black plastic carter cov-
ers, Nr. 2 black plastic lever arms, Nr. 1 anodized aluminum bar, Nr. 1 black
plastic external door furniture, Nr. 1 half-cylinder with 3 keys, Nr. 1 cylinder
to pass with 3 keys (DC version only), Nr. 1 drilling template, Nr. 1 adhesive
pictogram (green arrow), Nr. 1 set of installation/maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, B (for Proget doors only), DC BM,
DC BSP, DC BS, DC ELM, ELM
Description ELM electric handle: see the dedicated pages
The EXUS LP panic bar consists of an anodized aluminum
horizontal bar that inserts into the lever arms attached to For the inactive leaf of two-leaved doors:
the mechanisms which activate the lock. Included (mounted on the door): anti-panic safety lock with 80mm en-
-- Reversible for right or left opening trance, the upper re-latch device, the upper strike plate and the vertical
-- For application to single leaf and two-leaved doors rods
-- Suited for Rever/Univer/Proget doors and other types of Included (in the package): Nr. 2 mechanisms, Nr. 2 black plastic carter cov-
panic exit doors ers, Nr. 2 black plastic lever arms, Nr. 1 anodized aluminum bar, Nr. 1 floor-
-- The horizontal bar is made of extruded anodized alu- mounted floor catch, Nr. 1 carrier arm (for fire doors only), Nr. 1 drilling
minum with an elliptical cross-section measuring template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installation/
40x20mm and a length of 1150mm
maintenance instructions
-- Two black plastic lever arms with galvanized steel core
Versions available: A
-- The two mechanisms are made of galvanized steel with
black plastic carter covers, one of which has an EXIT label
that identifies the lock side EXUS LP KIT
-- The lock is anti-panic/fire rated for Euro profile cylinders (SUPPLIED SEPARATELY FROM THE DOOR)
-- The door furnitures and related cover plates are made of
black plastic, while the installation plate is made of gal- KIT for single leaf or the active leaf of two-leaved doors:
vanized steel Please specify leaf thickness and door type - REVER, UNIVER or PROGET
-- DC version with cylinder to pass - in the order
KIT contents: Nr. 1 anti-panic lock with 65mm entrance, Nr. 1 strike box
lock insert, Nr. 2 mechanisms, Nr. 2 black plastic carter covers, Nr. 2 black
VERSIONS AVAILABLE plastic lever arms, Nr. 1 anodized aluminum bar, Nr. 1 black plastic external
door furniture, Nr. 1 half-cylinder with 3 keys, Nr. 1 cylinder to pass with
3 keys (DC version only), Nr. 1 drilling template, Nr. 1 adhesive pictogram
(green arrow), Nr. 1 set of installation/maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, DC BM, DC BSP, DC BS

KIT for the inactive leaf of two-leaved doors, suited for REV-
BM BSP BS BMC ER, UNIVER and PROGET fire and multipurpose doors (pro-
duced after 01.01.2005): specify door type on the order form
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
anisms, Nr. 2 black plastic carter covers, Nr. 2 black plastic lever arms, Nr. 1
anodized aluminum bar, Nr. 1 upper re-latch device, Nr. 1 floor-mounted
floor catch, Nr.  1 carrier arm (excluding REVER and UNIVER MULTIPUR-
POSE), Nr. 1 drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1
set of installation/maintenance instructions
BC B A DC BM Versions available: A

KIT for the inactive leaf of two-leaved doors and suited for
other types of multipurpose doors and for substitution of
non CE marked panic bars (PROGET doors):
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
anisms, Nr. 2 black plastic carter covers, Nr. 2 black plastic lever arms, Nr. 1
anodized aluminum bar, Nr. 1 upper re-latch device, Nr. 1 upper strike plate,
DC BSP DC BS DC ELM ELM vertical rods, Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm, Nr. 1 drilling
template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installation/
maintenance instructions
VARIATIONS ON REQUEST (see dedicated page)
Versions available: A
-- Aluminum bar painted in RAL colors
-- External BM, BSP, BS, BMC and BC door furnitures in brushed
stainless steel
-- External BM and BSP door furnitures painted in RAL colors
-- MAC1 panic lock with access control system, combinable with
the BM and DC BM versions
-- Mastered or coded cylinders
-- Microswitch and cable sleeve for signaling when the door is open
65
 EXUS® LA ALUMINUM
Panic bar for internal locks - EN 1125:2008

EXUS® LA IN ALUMINUM EXUS LA (SUPPLIED WITH THE DOOR)

fire doors
PROGET

For single leaf or the active leaf of two-leaved doors:

Included (mounted on the door): the anti-panic lock with 65mm entrance
and the strike box lock insert
Included (in the package): Nr. 2 mechanisms, Nr. 2 polished chrome alu-
minum carter covers, Nr.  2 polished chrome aluminum lever arms, Nr.  1
anodized aluminum bar, Nr. 1 stainless steel external door furniture, Nr. 1
half-cylinder with 3 keys, Nr.  1 cylinder to pass with 3 keys (DC version
only), Nr. 1 drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1
set of installation/maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, B (for Proget doors only), DC BM,
DC BSP, DC BS, DC ELM, ELM
Description
ELM electric handle: see the dedicated pages
The EXUS LA panic bar consists of an anodized aluminum
horizontal bar that inserts into lever arms attached to the
mechanisms which activate the lock. For the inactive leaf of two-leaved doors:
Included (mounted on the door): anti-panic safety lock with 80mm en-
-- Reversible for right or left opening trance, the upper re-latch device, the upper strike plate and the vertical
-- For application to single leaf and two-leaved doors rods
-- Suited for Rever/Univer/Proget doors and other types of Included (in the package): Nr. 2 mechanisms, Nr. 2 polished chrome alu-
panic exit doors minum carter covers, Nr.  2 polished chrome aluminum lever arms, Nr.  1
-- The horizontal bar is made of extruded anodized aluminum anodized aluminum bar, Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm
with an elliptical cross-section measuring 40x20mm and a (for fire doors only), Nr. 1 drilling template, Nr. 1 adhesive pictogram (green
length of 1150mm arrow), Nr. 1 set of installation/maintenance instructions
-- The two lever arms are made of an aluminum alloy with a Versions available: A
polished chrome finish
-- The two mechanisms are made of galvanized steel with
aluminum alloy carter covers with a polished chrome finish,
one of which has an EXIT label to identify the lock side EXUS LA KIT
-- The lock is anti-panic/fire rated for Euro profile cylinders (SUPPLIED SEPARATELY FROM THE DOOR)
-- The door furnitures and related cover plates are made of
AISI 304 brushed stainless steel, while the installation plate KIT for single leaf or the active leaf of two-leaved doors:
is made of galvanized steel Please specify leaf thickness and door type - REVER, UNIVER or PROGET -
-- The arms and carter covers are finished with tri-valent in the order
chrome in compliance with the ROSH regulation
KIT contents: Nr. 1 anti-panic lock with 65mm entrance, Nr. 1 strike box
-- DC version with cylinder to pass
lock insert, Nr. 2 mechanisms, Nr. 2 polished chrome aluminum carter cov-
ers, Nr. 2 polished chrome aluminum lever arms, Nr. 1 anodized aluminum
bar, Nr. 1 stainless steel external door furniture, Nr. 1 half-cylinder with 3
VERSIONS AVAILABLE keys, Nr.  1 cylinder to pass with 3 keys (DC version only), Nr.  1 drilling
template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installation/
maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, DC BM, DC BSP, DC BS

KIT for the inactive leaf of two-leaved doors, suited for REV-
ER, UNIVER and PROGET fire and multipurpose doors (pro-
BM BSP BS BMC duced after 01.01.2005): specify door type on the order form
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
anisms, Nr.  2 polished chrome aluminum carter covers, Nr.  2 polished
chrome aluminum lever arms, Nr. 1 anodized aluminum bar, Nr. 1 upper
re-latch device, Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm (excluding
REVER and UNIVER MULTIPURPOSE), Nr. 1 drilling template, Nr. 1 adhesive
pictogram (green arrow), Nr. 1 set of installation/maintenance instructions

Versions available: A
BC B A DC BM
KIT for the inactive leaf of two-leaved doors and suited for
other types of multipurpose doors and for substitution of
non CE marked panic bars (PROGET doors):
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
anisms, Nr.  2 polished chromed aluminum carter covers, Nr.  2 chromed
aluminum lever arms, Nr. 1 anodized aluminum bar, Nr. 1 upper re-latch
device, Nr.  1 upper strike plate, vertical rods, Nr.  1 floor-mounted floor
DC BSP DC BS DC ELM ELM catch, Nr. 1 carrier arm, Nr. 1 drilling template, Nr. 1 adhesive pictogram
(green arrow), Nr. 1 set of installation/maintenance instructions
Versions available: A
VARIATIONS ON REQUEST (see dedicated page)
-- Aluminum bar painted in RAL colors
-- MAC1 panic lock with access control system, combinable with the NOTE
BM and DC BM versions It is not advisable to use the anti-panic bar EXUS LA for marine
-- Mastered or coded cylinders environments or in particularly humid areas. For these situa-
-- Microswitch and cable sleeve for signaling when the door is open tions the use of the anti-panic bar EXUS LX is recommended.
66
EXUS® LX STAINLESS STEEL
Panic bar for internal locks - EN 1125:2008

EXUS® LX IN STAINLESS STEEL EXUS LX (SUPPLIED WITH THE DOOR)

fire doors
PROGET
For single leaf or the active leaf of two-leaved doors:
Included (mounted on the door): the anti-panic lock with 65mm entrance
and the strike box lock insert
Included (in the package): Nr. 2 stainless steel mechanisms, Nr. 2 stainless
steel carter covers, Nr. 2 stainless steel lever arms, Nr. 1 stainless steel bar,
Nr. 1 stainless steel external door furniture, Nr. 1 half-cylinder with 3 keys,
Nr. 1 cylinder to pass with 3 keys (DC version only), Nr. 1 drilling template,
Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installation/mainte-
nance instructions
Versions available: BM, BSP, BS, BMC, BC, B (for Proget doors only), DC BM,
Description DC BSP, DC BS, DC ELM, ELM
The entire EXUS LX panic bar is made of stainless steel, ELM electric handle: see the dedicated pages
and consists of a horizontal bar that inserts into lever arms
attached to the mechanisms which activate the lock. For the inactive leaf of two-leaved doors:
Included (mounted on the door): anti-panic safety lock with 80mm en-
-- Maximum corrosion resistance and noteworthy robustness trance, the upper re-latch device, the upper strike plate and the vertical
of the entire set rods
-- Optimal aesthetic appearance
Included (in the package): Nr. 2 stainless steel mechanisms, Nr. 2 stainless
-- Reversible for right or left opening
steel carter covers, Nr. 2 stainless steel lever arms, Nr. 1 stainless steel bar,
-- For application to single leaf and two-leaved doors
-- Suited for Rever/Univer/Proget doors and other types of Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm (for fire doors only), Nr. 1
panic exit doors drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of in-
-- The horizontal bar is made of AISI 304 brushed stainless stallation/maintenance instructions
steel with an elliptical cross-section measuring 40x20mm, Versions available: A
length of 1150mm
-- The two lever arms are made of AISI 304 brushed stainless
steel
-- The two mechanisms are made of AISI 304 stainless steel EXUS LX KIT
-- The two carter covers are made of AISI 304 brushed stainless (SUPPLIED SEPARATELY FROM THE DOOR)
steel, and one is labeled with EXIT to identify the lock side
-- The lock is anti-panic/fire rated for Euro profile cylinders KIT for single leaf or the active leaf of two-leaved doors:
-- The door furnitures and related cover plates are made of Please specify leaf thickness and door type - REVER, UNIVER or PROGET -
AISI 304 brushed stainless steel, while the installation plate in the order
is made of galvanized steel
KIT contents: Nr. 1 anti-panic lock with 65mm entrance, Nr. 1 strike box
-- DC version with cylinder to pass
lock insert, Nr. 2 stainless steel mechanisms, Nr. 2 stainless steel carter cov-
ers, Nr. 2 stainless steel lever arms, Nr. 1 stainless steel bar, Nr. 1 stainless
steel external door furniture, Nr. 1 half-cylinder with 3 keys, Nr. 1 cylinder
VERSIONS AVAILABLE to pass with 3 keys (DC version only), Nr. 1 drilling template, Nr. 1 adhesive
pictogram (green arrow), Nr. 1 set of installation/maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, DC BM, DC BSP, DC BS

KIT for the inactive leaf of two-leaved doors, suited for REV-
ER, UNIVER and PROGET fire and multipurpose doors (pro-

duced after 01.01.2005): specify door type on the order form
BM BSP BS BMC KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 stain-
less steel mechanisms, Nr.  2 stainless steel carter covers, Nr.  2 stainless
steel lever arms, Nr. 1 stainless steel bar, Nr. 1 upper re-latch device, Nr. 1
floor-mounted floor catch, Nr. 1 carrier arm (excluding REVER and UNIVER
MULTIPURPOSE), Nr. 1 drilling template, Nr. 1 adhesive pictogram (green
arrow), Nr. 1 set of installation/maintenance instructions
Versions available: A
BC B A DC BM KIT for the inactive leaf of two-leaved doors and suited for
other types of multipurpose doors and for substitution of
non CE marked panic bars (PROGET doors):
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 stain-
less steel mechanisms, Nr.  2 stainless steel carter covers, Nr.  2 stainless
steel lever arms, Nr. 1 stainless steel bar, Nr. 1 upper re-latch device, Nr. 1
upper strike plate, vertical rods, Nr. 1 floor-mounted floor catch, Nr. 1 car-
DC BSP DC BS DC ELM ELM rier arm, Nr. 1 drilling template, Nr. 1 adhesive pictogram (green arrow),
Nr. 1 set of installation/maintenance instructions
Versions available: A
VARIATIONS ON REQUEST (see dedicated page)
-- MAC1 panic lock with access control system, combinable with the
BM and DC BM versions
-- Mastered or coded cylinders
-- Microswitch and cable sleeve for signaling when the door is open

67
 PROGET
fire doors

68
Presentation
TWIST panic bars

PRESENTATION

fire doors
PROGET
TWIST panic bars
TWIST panic bars are marked in accordance with Euro- With the new packaging of the TWIST panic bar, NINZ S.p.A.
pean standard EN 1125:2008, which entered in effect January demonstrates its intent to believe in market development by
01, 2010, and which prescribes a series of substantial changes investing in designs and company image in order to endow
that further extend the requirements for maximum safety its own products with added value while maintaining highly
and ease of opening. competitive quality-price ratios.

The KIT designed for your needs

When ordered separately from the door, the TWIST series
of panic bars is provided in elegant and functional KITs
packaged for presentation in the most appropriate format NOTE
for distribution. The TWIST exit device se-
Packaging in KITs ensures customers, installers and there- ries is combined with a
fore the final users that they are receiving a complete anti- black PLASTIC handle.
panic system with fully corresponding parts that are all
certified.

Finishing Black PLASTIC handle

The TWIST panic bar series is proposed in a black PLASTIC
version combined with an anodized ALUMINUM bar. On
request, the bar and the door furniture may be painted an
RAL colors, opening up an infinite variety of aesthetic solu-
tions.

Certifications and replacements

Given the importance of maintaining the entire system’s
conformity, special attention has been paid to replace-
ment parts, which have been subjected to testing in ac-
cordance with the EN 1125:2008 standard due to their piv-
otal role in maintaining certification.
The only way to ensure that the products maintain their
original characteristics over time is by using original NINZ
replacement parts.
For this reason, the instructions for TWIST panic bars in-
clude additional indications regarding proper installation
and maintenance plus a explosion assembly drawing that
specifies every smallest detail of the certified system with all
of the references required for ordering replacement parts.

69
 TWIST - Features, certifications
Panic bar

FEATURES
fire doors
PROGET

- The classic line of panic bars, an ever-green, available in

the standard combination with black plastic arms/caps
and anodized aluminum bar
- Certified for internal locks with a 65mm entrance for sin-
gle leaves or active leaves, and with an 80mm entrance
for inactive leaves
- Reversible for mounting on Right or Left doors
- Protrusion 100mm
- Proposed together with the door or separately in a com-
plete KIT packaged in a single black/green box
- Packaging is labeled to identify product characteristics
- Wide range of customizations: colored bar, colored or Also suited for doors with fire ratings:
stainless steel handles, locks with access control systems,
special coded or mastered cylinders REI 30 REI 60EI2120 REI 90
smoke resistant
40
85
200

100 38
max. 1238
(for hinged gates max. 1588)

CERTIFICATION

Suited for one-leaved doors or the active and inac-

tive leaves of two-leaved doors with dimensions up to
1350x2880mm/leaf, mass up to 300kg/leaf.

Denomination TWIST PANIC BAR

Ninz S.p.A. Corso Trento, 2/A
Manufacturer
I-38061 ALA (TN)/ITALY
Year application trademark 08
Nr. and year of the standard EN 1125:2008
Certifying body 0425
certificate Nr. 0425 CPD 1228
Classification 377B1321AA

1st Category of use very frequent

2nd Durability 200.000 cycles
3rd Door mass over 200 kg
4th Suitable for fire/smoke rated doors
5th Safety, suitable for evacuation routes
6th High corrosion resistance 96 h
7th Material safety 1000 N
8th Bar protrusion up to 150 mm
9th Activation type with push bar
10th Suitable for one- or two-leaved doors

70
TWIST
Panic bar for internal locks - EN 1125:2008

TWIST IN BLACK PLASTIC TWIST (SUPPLIED WITH THE DOOR)

fire doors
PROGET
For single leaf or the active leaf of two-leaved doors:
Included (mounted on the door): the anti-panic lock with 65mm entrance
and the strike box lock insert
Included (in the package): Nr. 2 mechanisms, Nr. 2 black plastic carter cov-
ers, Nr. 2 black plastic lever arms, Nr. 1 anodized aluminum bar, Nr. 1 black
plastic external door furniture, Nr. 1 half-cylinder with 3 keys, Nr. 1 drilling
template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installation/
maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, B (for Proget doors only),
ELM
Description ELM electric handle: see the dedicated pages
The TWIST plastic panic bar consists of an anodized alu-
minum horizontal bar that inserts into the lever arms at- For the inactive leaf of two-leaved doors:
tached to the mechanisms used to activate the lock. Included (mounted on the door): anti-panic safety lock with 80mm en-
trance, the upper re-latch device, the upper strike plate and the vertical
-- Reversible for right or left opening rods
-- For application to single leaf and two-leaved doors Included (in the package): Nr. 2 mechanisms, Nr. 2 black plastic carter cov-
-- Suited for Rever/Univer/Proget doors and other types of ers, Nr. 2 black plastic lever arms, Nr. 1 anodized aluminum bar, Nr. 1 floor-
panic exit doors mounted door catch, Nr. 1 carrier arm (for fire doors only), Nr. 1 drilling
-- The horizontal bar is made of extruded anodized alu- template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installation/
minum with an elliptical cross-section measuring maintenance instructions
40x20mm and a length of 1150mm Versions available: A
-- Two black plastic lever arms with galvanized steel core
-- The two mechanisms are made of galvanized steel with
black plastic carter covers, one of which has an EXIT label TWIST KIT
that identifies the lock side
-- The lock is anti-panic/fire resistance for Euro profile cyl- (SUPPLIED SEPARATELY FROM THE DOOR)
inders
-- The door furnitures and the cover plates are made of KIT for single leaf or the active leaf of two-leaved doors:
black plastic, while the installation plate is made of gal- Please specify leaf thickness and door type - REVER, UNIVER or PROGET
vanized steel - in the order
KIT contents: Nr. 1 anti-panic lock with 65mm entrance, Nr. 1 strike box
lock insert, Nr. 2 mechanisms, Nr. 2 black plastic carter covers, Nr. 2 black
VERSIONS AVAILABLE plastic lever arms, Nr. 1 anodized aluminum bar, Nr. 1 black plastic external
door furniture, Nr. 1 half-cylinder with 3 keys, Nr. 1 drilling template, Nr. 1
adhesive pictogram (green arrow), Nr.  1 set of installation/maintenance
instructions
Versions available: BM, BSP, BS, BMC, BC

KIT for the inactive leaf of two-leaved doors, suited for REV-
ER, UNIVER and PROGET fire and multipurpose doors (pro-
BM BSP BS BMC duced after 01.01.2005): specify door type on the order form
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
anisms, Nr. 2 black plastic carter covers, Nr. 2 black plastic lever arms, Nr. 1
anodized aluminum bar, Nr. 1 upper re-latch device, Nr. 1 floor-mounted
floor catch, Nr.  1 carrier arm (excluding REVER and UNIVER MULTIPUR-
POSE), Nr. 1 drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1
set of installation/maintenance instructions
BC B A ELM Versions available: A

KIT for the inactive leaf of two-leaved doors and suited for
other types of multipurpose doors and for substitution of
VARIATIONS ON REQUEST (see dedicated page) non CE marked panic bars (PROGET doors):
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
-- Aluminum bar painted in RAL colors anisms, Nr. 2 black plastic carter covers, Nr. 2 black plastic lever arms, Nr. 1
-- External BM, BSP, BS, BMC and BC commands in brushed anodized aluminum bar, Nr. 1 upper re-latch device, Nr. 1 upper strike plate,
stainless steel vertical rods, Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm, Nr. 1 drilling
-- External BM and BSP commands painted in RAL colors template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installation/
-- MAC1 panic lock with access control mode, combinable maintenance instructions
with the BM version Versions available: A
-- Mastered or encrypted cylinders
-- Microswitch and cable sleeve for signaling when the
door is open

71
 PROGET
fire doors

72
Presentation
SLASH panic bars

PRESENTATION

fire doors
PROGET
SLASH panic bars
Ninz S.p.A. is a leader in fire doors, and has once again reas- With the expansion of the line and the new packaging of the
serted itself as a visionary company with a strong identity SLASH panic bar, NINZ S.p.A. demonstrates its faith in market
created by its continuous research into the design and tech- development by investing in designs and company image in
nology of its own products, such as the new line of SLASH order to endow its fire doors and the series of accessories
panic bars. with added value while continuing to maintain highly com-
All SLASH handles are marked and pre-certified accord- petitive quality-price ratios.
ing to European standard EN 1125:2008, which entered in ef-
fect January 01, 2010, to prescribe a serious of substantial
changes that further extend the requirements for maximum
safety and ease of opening.

The KIT designed for your needs

When ordered separately from the door, the SLASH se-
ries of panic bars is provided in elegant and functional KITs
packaged for presentation in the most appropriate distribu-
tion format.
Packaging in KITs ensures customers, installers and there-
fore the final users that they are receiving a complete anti-
panic system with fully corresponding parts that are all
certified. Black PLASTIC handle Brushed STAINLESS STEEL handle

Finishing
In addition to the black PLASTIC version combined with NOTE
anodized ALUMINUM bars, new combinations include By default external door furniture is provided with the
the brushed STAINLESS STEEL version and the pol- same finishing as the panic bar.
ished chromed ALUMINUM version combined with the
anodized ALUMINUM bar. Many other color and sur-
face combinations are possible for equally aesthetic solu-
tions.

Certifications and replacements

Given the importance of maintaining the entire system’s
conformity, special attention has been paid to replace-
ment parts, which have been subjected to testing in ac-
cordance with the EN 1125:2008 standard due to their piv-
otal role in maintaining certification.
The only way to ensure that the products maintain their
original characteristics over time is by using original
NINZ replacement parts.
For this reason, the instructions for SLASH panic bars in-
clude additional indications regarding proper installation
and maintenance plus a blow-up drawing that specifies
every smallest detail of the certified system with all of the
references required for ordering replacement parts.

73
 SLASH - Features, certifications
Panic bar

FEATURES
fire doors
PROGET

- Panic bar that stands out from the others due to its parti-
cular design and the rounded shapes of the carters. This
characteristic not only improves aesthetic appeal, but it
also eliminates any risk of injury during use
- Available in different color and surface combinations, in
brushed stainless steel for the cover carters and the bar,
or with polished chromed aluminum carters and anodi-
zed aluminum bar, and then there is always the classic
combination that is still in fashion - black plastic carters
with anodized aluminum bar
- Certified for internal locks with a 65mm entrance for sin-
gle leaves or active leaves, and with an 80mm entrance Also suited for doors with classifications up to:
for inactive leaves
- Reversible for Right or Left mounting REI 30 REI 60EI2120 REI 90
smoke resistant
- Protrusion 75mm
- Proposed together with the door or separately in a com-
plete KIT packaged in a single black/orange box
- Label applied to the packaging to identify the product’s
characteristics
- Wide range of customizations: colored bar, colored or
stainless steel handles, lock with access control mechani-
sms, special encrypted or mastered cylinders

•
60

• W
75 27 110
40

max. 1354
(for hinged gates max. 1704) 55
reduced
version
(AR) ALU max. 400, S.STEEL max. 434

CERTIFICATION

Suited for one-leaved doors or the active and inacti-

ve leaves of two-leaved doors with dimensions up to
1350x2880mm/leaf, mass up to 300kg/leaf.

Denomination SLASH PANIC BAR

Ninz S.p.A. Corso Trento, 2/A
Manufacturer
I-38061 ALA (TN)/ITALY
Year application trademark 08
Nr. and year of the standard EN 1125:2008
Certifying body 0425
CE certificate Nr. 1308-CPD-2007
Classification 377B1322BA

1st Category of use very frequent

2nd Durability 200.000 cycles
3rd Door mass over 200 kg
4th Suitable for fire/smoke rated doors
5th Safety, suitable for evacuation routes
6th High corrosion resistance 96 h
7th Material safety 1000 N
8th Bar protrusion up to 100 mm
9th Activation type with touch bar
10th Suitable for one- or two-leaved doors

74
SLASH BLACK PLASTIC
Panic bar for internal locks - EN 1125:2008

SLASH IN BLACK PLASTIC SLASH (SUPPLIED WITH THE DOOR)

fire doors
PROGET
For single leaf or the active leaf of two-leaved doors:
Included (mounted on the door): the anti-panic lock with 65mm entrance
and the strike box lock insert
Included (in the package): Nr.  2 mechanisms, Nr.  2 black plastic carter
covers, Nr.  1 anodized aluminum bar with connection tube and spacer,
Nr. 1 hole cover in RAL 9006 colored plastic with base plate (for REVER
and UNIVER doors), Nr. 1 black plastic external door furniture, Nr. 1 half-
cylinder with 3 keys, Nr. 1 drilling template, Nr. 1 adhesive pictogram (green
arrow), Nr. 1 set of installation/maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, B (for Proget doors only), ELM
ELM electric handle: see the dedicated pages
Description
The SLASH panic bar consists of an anodized aluminum For the inactive leaf of two-leaved doors:
horizontal bar and an internal connection tube that inserts Included (mounted on the door): anti-panic safety lock with 80mm en-
into the mechanisms which activate the lock. trance, the upper re-latch device, the upper strike plate and the vertical
rods
-- Reversible for right or left opening Included (in the package): Nr. 2 mechanisms, Nr. 2 black plastic carter cov-
-- For application to single leaf and two-leaved doors ers, Nr. 1 anodized aluminum bar with connection tube and spacer, Nr. 1
-- Suited for Rever/Univer/Proget doors and other types of floor-mounted floor catch, Nr. 1 carrier arm (for fire doors only), Nr. 1 drill-
panic exit doors ing template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installa-
-- The horizontal bar is made of extruded anodized alu- tion/maintenance instructions
minum with an elliptical cross-section measuring Versions available: A, AR (reduced) for inactive leaves with FM L2 width
40x20mm and a length of 1150mm, equipped with a ≤ 500mm
connection tube
-- The two mechanisms are made of galvanized steel with
black plastic carter covers, one of which has a green la- SLASH KIT
bel that identifies the lock side
-- The lock is anti-panic/fire rated for Euro profile cylinders
(SUPPLIED SEPARATELY FROM THE DOOR)
-- The door furnitures and the cover plates are made of KIT for single leaf or the active leaf of two-leaved doors:
black plastic, while the installation plate is made of gal- Please specify leaf thickness and door type - REVER, UNIVER or PROGET
vanized steel - in the order
KIT contents: Nr. 1 anti-panic lock with 65mm entrance, Nr. 1 strike box
lock insert, Nr. 2 mechanisms, Nr. 2 black plastic carter covers, Nr. 1 ano-
VERSIONS AVAILABLE dized aluminum bar with connection tube and spacer, Nr.  1 hole cover
in RAL 9006 colored plastic with base plate, Nr. 1 black plastic external
door furniture, Nr. 1 half-cylinder with 3 keys, Nr. 1 drilling template, Nr. 1
adhesive pictogram (green arrow), Nr.  1 set of installation/maintenance
instructions
Versions available: BM, BSP, BS, BMC, BC

BM BSP BS BMC KIT for the inactive leaf of two-leaved doors, suited for REV-
ER, UNIVER and PROGET fire and multipurpose doors (pro-
duced after 01.01.2005): specify door type on the order form
KIT contents: Nr.  1 anti-panic safety lock with 80mm entrance, Nr.  2
mechanisms, Nr.  2 black plastic carter covers, Nr.  1 anodized aluminum
bar with connection tube and spacer, Nr.  1 upper re-latch device, Nr.  1
floor-mounted floor catch, Nr. 1 carrier arm (excluding REVER and UNIVER
MULTIPURPOSE), Nr. 1 drilling template, Nr. 1 adhesive pictogram (green
BC B A AR ELM arrow), Nr. 1 set of installation/maintenance instructions
Versions available: A, AR (reduced) for use with inactive leaves with FM L2
width ≤ 500mm
VARIATIONS ON REQUEST (see dedicated page)
KIT for the inactive leaf of two-leaved doors and suited for
other types of multipurpose doors and for substitution of
-- Aluminum bar painted in RAL colors non CE marked panic bars (PROGET doors):
-- External BM, BSP, BS, BMC and BC commands in brushed KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
stainless steel anisms, Nr. 2 black plastic carter covers, Nr. 1 anodized aluminum bar with
-- External BM and BSP commands painted in RAL colors connection tube and spacer, Nr. 1 upper re-latch device, Nr. 1 upper strike
-- MAC1 panic lock with access control mode, combinable plate, vertical rods, Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm, Nr. 1
with BM versions drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of in-
-- Mastered or encoded cylinders stallation/maintenance instructions
-- Microswitch and cable sleeve for signaling when the Versions available: A, AR (reduced) for use with inactive leaves with FM L2
door is open width ≤ 500mm

75
 SLASH ALU ALUMINUM
Panic bar for internal locks - EN 1125:2008

SLASH IN ALUMINUM SLASH ALU (SUPPLIED WITH THE DOOR)

fire doors
PROGET

For single leaf or the active leaf of two-leaved doors:

Included (mounted on the door): the anti-panic lock with 65mm entrance
and the strike box lock insert
Included (in the package): Nr. 2 mechanisms, Nr. 2 polished chrome alu-
minum carter covers, Nr. 1 anodized aluminum bar with connection tube
and spacer, Nr. 1 hole cover in black plastic with base plate (for REVER
and UNIVER doors), Nr. 1 stainless steel external door furniture, Nr. 1 half-
cylinder with 3 keys, Nr. 1 drilling template, Nr. 1 adhesive pictogram (green
arrow), Nr. 1 set of installation/maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, B (for Proget doors only), ELM
ELM electric handle: see the dedicated pages
Description
The SLASH ALU panic bar consists of an anodized alu-
For the inactive leaf of two-leaved doors:
minum horizontal bar and an internal connection tube
Included (mounted on the door): anti-panic safety lock with 80mm en-
that inserts into the mechanisms which activate the lock.
trance, the upper re-latch device, the upper strike plate and the vertical
rods
-- Reversible for right or left opening
-- For application to single leaf and two-leaved doors Included (in the package): Nr. 2 mechanisms, Nr. 2 polished chrome alu-
-- Suited for Rever/Univer/Proget doors and other types of minum carter covers, Nr. 1 anodized aluminum bar with connection tube
panic exit doors and spacer, Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm (for fire doors
-- The horizontal bar is made of extruded anodized aluminum only), Nr. 1 drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1
with an elliptical cross-section measuring 40x20mm and a set of installation/maintenance instructions
length of 1150mm, equipped with a connection tube Versions available: A, AR (reduced) for inactive leaves with FM L2 width
-- The two mechanisms are made of galvanized steel with ≤ 500mm
aluminum alloy carter covers with polished chrome finish-
ing, one of which has a green label to identify the lock SLASH ALU KIT
side (SUPPLIED SEPARATELY FROM THE DOOR)
-- The lock is anti-panic/fire rated for Euro profile cylinders
-- The external door furnitures and related cover plates are KIT for single leaf or the active leaf of two-leaved doors:
made of AISI 304 brushed stainless steel, while the instal- Please specify leaf thickness and door type - REVER, UNIVER or PROGET
lation plate is made of galvanized steel - in the order
-- The carters are finished with tri-valent chrome in compli- KIT contents: Nr. 1 anti-panic lock with 65mm entrance, Nr. 1 strike box
ance with the ROSH regulation lock insert, Nr. 2 mechanisms, Nr. 2 polished chrome aluminum carter cov-
ers, Nr. 1 anodized aluminum bar with connection tube and spacer, Nr. 1
hole cover in black plastic with base plate, Nr. 1 stainless steel external
NOTE door furniture, Nr. 1 half-cylinder with 3 keys, Nr. 1 drilling template, Nr. 1
It is not advisable to use the anti-panic bar SLASH ALU for ma- adhesive pictogram (green arrow), Nr.  1 set of installation/maintenance
rine environments or in particularly humid areas. For these situ- instructions
ations the use of the anti-panic bar SLASH S.S. is recommended. Versions available: BM, BSP, BS, BMC, BC

KIT for the inactive leaf of two-leaved doors, suited for REV-
VERSIONS AVAILABLE ER, UNIVER and PROGET fire and multipurpose doors (pro-
duced after 01.01.2005): specify door type on the order form
KIT contents: Nr. 1 anti-panic safety lock with 80 mm entrance, Nr. 2
mechanisms, Nr. 2 polished chrome aluminum carter covers, Nr. 1 anodized
aluminum bar with connection tube and spacer, Nr. 1 upper re-latch device,
Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm (excluding REVER and
UNIVER MULTIPURPOSE), Nr. 1 drilling template, Nr. 1 adhesive pictogram
(green arrow), Nr. 1 set of installation/maintenance instructions
BM BSP BS BMC
Versions available: A, AR (reduced) for use with inactive leaves with FM L2
width ≤ 500mm

KIT for the inactive leaf of two-leaved doors and suited for
other types of multipurpose doors and for substitution of
non CE marked panic bars (PROGET doors):
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
BC B A AR ELM anisms, Nr.  2 polished chromed aluminum carter covers, Nr.  1 anodized
aluminum bar with connection tube and spacer, Nr. 1 upper re-latch device,
Nr. 1 upper strike plate, vertical rods, Nr. 1 floor-mounted floor catch, Nr. 1
carrier arm, Nr. 1 drilling template, Nr. 1 adhesive pictogram (green arrow),
VARIATIONS ON REQUEST (see dedicated page) Nr. 1 set of installation/maintenance instructions
Versions available: A, AR (reduced) for use with inactive leaves with FM L2
-- Aluminum bar painted in RAL colors width ≤ 500mm
-- MAC1 panic lock with access control system, combinable
with BM versions
-- Mastered or encoded cylinders
-- Microswitch and cable sleeve for signaling when the
door is open
76
SLASH STAINLESS STEEL
Panic bar for internal locks - EN 1125:2008

SLASH IN STAINLESS STEEL SLASH STAINLESS STEEL (SUPPLIED WITH THE DOOR)

fire doors
PROGET
For single leaf or the active leaf of two-leaved doors:
Included (mounted on the door): the anti-panic lock with 65mm entrance
and the strike box lock insert
Included (in the package): Nr. 2 mechanisms, Nr. 2 stainless steel carter
covers, Nr.  1 stainless steel bar with connection tube and spacer, Nr.  1
hole cover in black-colored plastic with base plate (for REVER and UNIVER
doors), Nr. 1 stainless steel external door furniture, Nr. 1 half-cylinder with
3 keys, Nr. 1 drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1
set of installation/maintenance instructions
Versions available: BM, BSP, BS, BMC, BC, B (for Proget doors only), ELM
Description ELM electric handle: see the dedicated pages
The SLASH STAINLESS STEEL panic bar consists of a stainless
steel horizontal bar and an internal connection tube that For the inactive leaf of two-leaved doors:
inserts into the mechanisms which activate the lock. Included (mounted on the door): anti-panic safety lock with 80mm en-
trance, the upper re-latch device, the upper strike plate and the vertical
-- Optimal corrosion and shock resistance rods
-- State of the art aesthetics Included (in the package): Nr. 2 mechanisms, Nr. 2 stainless steel carter
-- Secure attachment of carters covers, Nr. 1 stainless steel bar with connection tube and spacer, Nr. 1 floor-
-- Reversible for right or left opening mounted floor catch, Nr. 1 carrier arm (for fire doors only), Nr. 1 drilling
-- For application to single leaf and two-leaved doors template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of installation/
-- Suited for Rever/Univer/Proget doors and other types of maintenance instructions
panic exit doors Versions available: A, AR (reduced) for inactive leaves with FM L2 width
-- The horizontal bar is made of AISI 304 brushed stain- ≤ 500mm
less steel with a 40x20mm elliptical cross-section and a
length of 1150mm, equipped with a connection tube
-- The two mechanisms are made of galvanized steel with SLASH STAINLESS STEEL KIT
AISI 304 stainless steel cover plates, one of which has a
(SUPPLIED SEPARATELY FROM THE DOOR)
green label that identifies the lock side
-- The lock is anti-panic/fire rated for Euro profile cylinders
KIT for single leaf or the active leaf of two-leaved doors:
-- The external door furnitures and related cover plates are
Please specify leaf thickness and door type - REVER, UNIVER or PROGET
made of AISI 304 brushed stainless steel, while the instal-
- in the order
lation plate is made of galvanized steel
KIT contents: Nr. 1 anti-panic lock with 65mm entrance, Nr. 1 strike box
lock insert, Nr. 2 mechanisms, Nr. 2 stainless steel carter covers, Nr. 1 stain-
less steel bar with connection tube and spacer, Nr. 1 hole cover in black
VERSIONS AVAILABLE plastic with base plate, Nr. 1 stainless steel door furniture, Nr. 1 half-cyl-
inder with 3 keys, Nr. 1 drilling template, Nr. 1 adhesive pictogram (green
arrow), Nr. 1 set of installation/maintenance instructions
Versions available: BM, BSP, BS, BMC, BC

KIT for the inactive leaf of two-leaved doors, suited for REV-
ER, UNIVER and PROGET fire and multipurpose doors (pro-
duced after 01.01.2005): specify door type on the order form
BM BSP BS BMC
KIT contents: Nr. 1 anti-panic safety lock with 80mm entrance, Nr. 2 mech-
anisms, Nr. 2 stainless steel carter covers, Nr. 1 stainless steel bar with con-
nection tube and spacer, Nr. 1 upper re-latch device, Nr. 1 floor-mounted
floor catch, Nr.  1 carrier arm (excluding REVER and UNIVER MULTIPUR-
POSE), Nr. 1 drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1
set of installation/maintenance instructions
Versions available: A, AR (reduced) for use with inactive leaves with FM L2
BC B A AR ELM width ≤ 500mm

KIT for the inactive leaf of two-leaved doors and suited for
other types of multipurpose doors and for substitution of
VARIATIONS ON REQUEST (see dedicated page) non CE marked panic bars (PROGET doors):
KIT contents: Nr.  1 anti-panic safety lock with 80mm entrance, Nr.  2
-- MAC1 panic lock with access control system, combinable mechanisms, Nr. 2 stainless steel cover plates, Nr. 1 stainless steel bar with
with BM versions connection tube and spacer, Nr. 1 upper re-latch device, Nr. 1 upper strike
-- Mastered or coded cylinders plate, vertical rods, Nr. 1 floor-mounted floor catch, Nr. 1 carrier arm, Nr. 1
-- Microswitch and cable sleeve for signaling when the drilling template, Nr. 1 adhesive pictogram (green arrow), Nr. 1 set of in-
door is open stallation/maintenance instructions
Versions available: A, AR (reduced) for use with inactive leaves with FM L2
width ≤ 500mm

77
 General information
Panic bars - System components

COMPONENTS OF THE CERTIFIED SYSTEM

fire doors
PROGET

All NINZ panic bars are supplied in complete KITs to ensure on the leaf and/or doorframe.
conformity with EN 1125:2008 standards and certifi- The purpose of the following examples is to help clarify
cation of the product. When supplied together with the what panic bars must include to comply with certified
door, several of these components are already mounted samples.

Certified components of the EXUS system for one-leaved doors:

1. panic bar (1a. mechanisms, 1b. carters, 1c. carrier arms,
1d. horizontal bar, 1e. adhesive pictogram)
2a. panic safe lock for single or active leaf
3. strike box lock
4. external operation
9a. square spindle
10. half cylinder or
cylinder to pass

Certified components of the EXUS system for inactive leaf

of two-leaved doors:
1. panic bar (1a. mechanisms, 1b. carters,
1c. carrier arms, 1d. horizontal
bar, 1e. adhesive pictogram)
2b. panic safe lock for inactive leaf
5. upper bolt device
6. strike box with roller
7. floor catch set
8. vertical rods (8a. upper, 8b. lower)
9b. square spindle
11. carrier arm (mandatory in case of
fire-rated doors only)

78
Variations on request
For panic bars

STAINLESS STEEL EXTERNAL DOOR FURNITURE

fire doors
PROGET
For all black plastic exit devices (except for those desig-
ned for glazed doors), brushed stainless steel external BM,
BSP, BS BMC and BC commands are available on request.

BM stainless steel BSP stainless steel

COLORED PLASTIC EXTERNAL DOOR FURNITURE

For all black plastic exit devices (except for those designed
for glazed doors), painted plastic external BM and BSP
commands are available on request.

Colors available:
RAL RAL RAL RAL RAL
1023 7016 7035 9006* 9010 *light aluminum

BM colored RAL1023 BSP colored RAL1023

PAINTED HORIZONTAL BAR

For all exit devices (except for those with a stainless steel
bar), the aluminum horizontal bar may be painted in the
RAL color of your choice.

VERSION „E“ WITH MICROSWITCH

All exit devices may be equipped with a microswitch incor-

porated in the hinge side mechanism for signaling when
the door is open. The cable and cable sleeve for the elec-
trical connection between the exit device and the wall are
included.

MAC1® AND MAC1® FAILSAFE

ACCESS CONTROL SYSTEMS

For all exit devices with type BM external door furniture

(except for those designed for glazed doors), the panic
lock is also available with the access control function. De-
livery together with the door includes the following: the
MAC1 or MAC1 FAILSAFE lock, external command with
LED, internal cabling of the leaf and the electric contacts
between the door leaf and door frame. In case of delivery
as a Kit with panic bar instead of the internal cabling and
the electric contacts a power supply cable and a flexible Handle for MAC1 and
cable sleeve will be supplied. MAC1 FAILSAFE locks with LEDs

MAC1 and MAC1 FAILSAFE:

- powered at 12-24 V AC/DC For sizes, information and technical data consult the de-
- 250 mA absorption with startup at 500 mA at 12V or max. 1A at 24V dicated pages
- timer incorporated, time set at 30 seconds
- possibility for continuous handle activation (open setting)

79
 Dimensional drawings
For panic bar components

Article Nr. Description

fire doors
PROGET

3201001.016 Lock for one-leaved doors and active leaves (AP 16/18)
3201001.024 Safety lock for inactive leaves (AP 020 P)
3201001.008 Safety lock for inactive leaves of UNIVER multipurpose and REVER (AP 020 U)
3201001.041 MAC1 Left lock
3201001.042 MAC1 Right lock
2401001.001 Lower floor catch for inactive leaf of PROGET and other multipurpose doors
3105019.001 Lower floor catch for inactive leaf of UNIVER
3105020.001 Lower floor catch for inactive leaf of REVER
2401006.001 Strike plate insert for one-leaved PROGET and other multipurpose doors
3105080.001 Upper re-latch device for inactive leaf of PROGET and other multipurpose doors
3105024.001 Upper re-latch device for inactive leaf of UNIVER and REVER
2401046.001 Upper strike box for inactive leaf of PROGET and other multipurpose doors
3305001.001 Carrier arm for inactive leaf

85 98
65 4 77
9 9

37
72
111

185
185
33

265
209

235

239
24

17
17

34

Lock for one-leaved doors and active leaves Safety lock for inactive leaf of PROGET and UNIVER fire-rated doors

96 85 25 (37 for Failsafe version)

4 75 65
9 9
37
37

72

185

209

235
185

265
239

19
17

24
30

Safety lock for inactive leaf of UNIVER multipurpose and REVER MAC lock (LX example)

80
Dimensional drawings
For panic bar components

12

fire doors
37 5

PROGET
13

22

15
Ø18

40
70

40

13
10
35 51 26

Lower floor catch for inactive leaf of PROGET and other multipurpose doors Upper re-latch device for inactive leaf of PROGET and other multipurpose doors

Ø63
38

14
Lower floor catch for inactive leaf of UNIVER Upper re-latch device for inactive leaf of UNIVER and REVER

18
52
12

18

56 36 20
29

32

13
51

21

Lower floor catch for inactive leaf of REVER Upper strike box for inactive leaf of PROGET and other multipurpose doors

220
63

59

55

Ø18

14

Ø20

34 15
21

20
10-20

Strike box lock insert for one-leaved doors of PROGET and other multipurpose doors Carrier arm for inactive leaf

81
 5002009/2 - C10
EDITION 1-2016
date of print: 22. April 2016

Ninz S.p.A. | Corso Trento 2/A | I-38061 Ala (TN)

Tel. +39 0464 678 300 | Fax +39 0464 679 025
[email protected] | www.ninz.it