Scribd
Upload
310 views1 page

MR - HLX1 Data Sheet

The document introduces the MR-HLX1 hydraulic drifter. It provides technical specifications for the drifter including its main dimensions, percussion rate, operating pressure, accumulators, shank lubrication system, recommended oil, rotation mechanism, and motor details. The drifter has a hole diameter drilling range of 22-45mm and a power class of 6.5kW. It can rotate continuously up to 180rpm or intermittently up to 350rpm.

Uploaded by

Mars ROCK DRILL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
310 views1 page

MR - HLX1 Data Sheet

The document introduces the MR-HLX1 hydraulic drifter. It provides technical specifications for the drifter including its main dimensions, percussion rate, operating pressure, accumulators, shank lubrication system, recommended oil, rotation mechanism, and motor details. The drifter has a hole diameter drilling range of 22-45mm and a power class of 6.5kW. It can rotate continuously up to 180rpm or intermittently up to 350rpm.

Uploaded by

Mars ROCK DRILL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Proudly introducing our MR-HLX1 hydraulic drifter

MR-HLX1 Technical overview


MAIN DIMENSIONS ACCUMULATORS
Hole diameter drilling 22 - 45 mm Accumulator gas Nitrogen N2
Power class 6.5 kW High pressure (HP) 50 bar
Percussion rate 70 - 88 Hz Low pressure (LP) 4 bar
Operating pressure Filling valve Vg8 DIN7756
Percussion SHANK LUBRICATION
Rotation (max. continuous) Air flow 250 Nl/min
Rotation (max. intermittent) Pressure 3 - 5 bar
100 - 180 bar Oil consumption 50 - 100 g/h
100 bar (OMM32) OIL RECOMMENDATION
Oil operating temperature +40°C up to +60°C
70 bar (OMM50)
140 bar
Rotation motor type OMM 32, OMM 50
Drill steels H25 drifter rods
Shanks Male R23, R25, R28
Weight 53 kg

ROTATION MECHANISM
Motor Orbit type
Motor type 1 OMM 32
Torque (at 140 bar) 100 Nm
Rotation speed 0 - 350 rpm - Manufactured upon request
Flow (at max. speed) 20 l/min - Lead time 40 business days
- Guarantee on failure due to defective manufacturing processes or materials*
Motor Orbit type - Tested on MARS ROCK DRILL´s percussion testing device**and in field work.
Motor type 2 OMM 50 - 1000 hours guarantee ***
Torque (at 140 bar) 160 Nm *Based on previous analisys to determine cause of failure, guarantee does not cover failure due to missuse or overwork.
**Tested at our facilities to check all the sistems working -see MARS ROCK DRILL Warranty policy for further information-.
Rotation speed 0 - 225 rpm *** Based on MARS ROCK DRILL´s Warranty Policy for hydraulic drifters

Flow (at max. speed) 20 l/min

You might also like