DMI CS Planning Department Yamaha Corporation All Rights Reserved

Contents

 Features: Designed for the Stage

Authentic acoustic- and electric-piano sounds
Ease-of-use
Wooden keys
Portable
 Comparison of CP4 and CP40 STAGE
Keyboard
Number of Voices
Number of control sliders
Connectors and Power supply

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Contents

 Assembly of the CP4 STAGE (CP40 STAGE)

Upper and Lower case assemblies
 Upper:
• Character LCD
• PNL, PNR, SLD, AJK, DJK, (DCIN) and DM circuit boards
• PS ERP assembly * CP4 STAGE only
Lower:
 NW GKS keyboard (GHD LKS keyboard)

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Contents

 Service Topics
How to check the CP4/40 STAGE
 Checking the settings
 Data backup, Initializing the settings
 Firmware version update
 Block diagram
 Test Program and DM Test points

How to disassemble the CP4/40 STAGE

1. Accessing the keyboard
2. Accessing the circuit boards
DMI CS Planning Department Yamaha Corporation All Rights Reserved
 Features: Designed for the Stage
 Authentic acoustic- and electric-piano sounds
 Ease-of-use
 Wooden keys
 Portable

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Additions: Auto Power Off
 The CP4/40 STAGE features the Auto Power Off function.
 Default setting: 30 minutes
 How to change the setting:
- Press the [UTILITY] button and select the “01: General”.
- Select “AutoOff” and set the value.
- Press the [STORE] button to end.

 Disabling Auto Power Off (simple method):

This message will appear.

Auto power off

disabled

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Additions: Auto Power Off
 NOTE:
 The power switch is a lock type switch.
 To turn the power on after the Auto Power Off is executed:
1. Press the power switch to the OFF (Standby) position.
2. Press the power switch again to the ON position.

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Comparison of CP4 and CP40 STAGE
 Keyboard
 Number of Voices
 Number of control sliders
 Connectors and Power supply

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Keyboard: NW GKS vs. GHD LKS

 CP4 STAGE and CP40 STAGE are equipped with a

different kind of Graded Hammer (GH) keyboard.
Keyboard CP4 STAGE CP40 STAGE

GH keyboard Type NW GKS GHD LKS

Natural wood -
- White key
(synthetic Ivory Key-tops) (Resin)

- Rubber contact 3 contacts 2 contacts

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Number of Voices
 CP4 STAGE includes the CFX sound.
CP4 STAGE CP40 STAGE
Voices 433 297
- CFX 15 -
- CF 15 15
- S6 15 -
- Rd 15 3
- Wr 6 6
- CP800 8 8
- DX 18 18
- Clav, Organ 67 49
- Strings,Choir, PAD 86 67
- Others 174 117
- Others (Drum) 14 14
DMI CS Planning Department Yamaha Corporation All Rights Reserved
 Number of control sliders
 CP4 STAGE.

CP4 STAGE CP40 STAGE

Parts 3 2
Effects
- Master equalizer 5 bands 3 bands

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Connectors and Power supply

Connectors CP4 STAGE CP40 STAGE

PHONES PHONES
Output L/MONO, R L/MONO,R
L,R (XLR) -
Foot switch SUSTAIN, ASSIGNABLE
Foot Controller 2 jacks 1 jack
MIDI IN, OUT
USB TO HOST, TO DEVICE
AUX IN 1 jack (stereo mini-jack)

Power supply CP4 STAGE CP40 STAGE

Power cord AC adaptor PA-150
(AC IN) (DC IN)

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Assembly of the CP4 STAGE
(CP40 STAGE)
 Upper and Lower case assemblies
 Upper:
 Character LCD
 PNL, PNR, SLD, AJK, DJK, (DCIN) and DM circuit boards
 PS ERP assembly * CP4 STAGE only
 Lower:
 NW GKS keyboard (GHD LKS keyboard)

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Assembly of the CP4 STAGE

Upper case assembly

LCD
PNL PNR SLD

DM AJK
DJK PS ERP

NW GKS keyboard

Lower case assembly

DMI CS Planning Department Yamaha Corporation All Rights Reserved
 Assembly of the CP40 STAGE

Upper case assembly

LCD
PNL PNR SLD

DM AJK
DJK DCIN

GHD LKS keyboard

Lower case assembly

DMI CS Planning Department Yamaha Corporation All Rights Reserved
 Service Topics

How to check the CP4/40 STAGE

 Checking the settings
 Data backup, Initializing the settings
 Firmware version update
 Block diagram
 Test Program and DM Test points

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Checking the settings
 Data backup procedure

1. Prepare: A compatible USB flash memory device

Connect the USB flash memory to the [TO DEVICE] terminal.

2. Call up the save display:

- Press the [FILE] button.
- Select the “01: Save” and then press the [ENTER] button.

3.
3. Set the file name:
- Set the file name and then press the [ENTER] button.

4. Execute: Press the [+1/Yes] button.

DMI CS Planning Department Yamaha Corporation All Rights Reserved
 Checking the settings
 Initializing the settings (There are 2 ways.)
A. Normal mode
1. Call up the Factory Set display:
Press the [UTILITY] button, select the “07: JOB” and “01: FactorySet”.
2. Set the “PowerON Auto” parameter to “off”.

3. Execute: Press the [+1/Yes] button. 2.

B. Test mode
1. Enter the Test Program
2. Select the “042 Factory Set”
3. Execute: Press the [ENTER] button.
DMI CS Planning Department Yamaha Corporation All Rights Reserved
 Checking the settings
 Firmware version update
1. Preparation:
- Check the Firmware version:
Press the [UTILITY] button.
Select the “07: JOB” and “02: Version”.

- Download the Firmware Updater:

1. Download the latest Firmware Updater from Yamaha
website.
2. Copy the program file (xxx.PRG) to a compatible USB flash
memory device.
!No other files should be present in the USB flash memory!

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Checking the settings
 Firmware version update

2. Enter the update mode:

- Connect the USB flash memory to the [TO DEVICE] terminal.
- Hold down the [ ] (play) button, then press the power on.

3. Execute: Press the [ ] (play) button.

4. Reboot:
- Turn off the instrument and remove the USB flash memory.
- Turn the power on and confirm the Firmware version.

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Service Topics

How to check the CP4/40 STAGE

 Checking the settings
 Data backup, Initializing the settings
 Firmware version update
 Block diagram (CP4 STAGE)
 Test Program and DM Test points

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Operation & system control section
Audio signal section
Block diagram Power supply section

 Panel
PNL signal LCD PNR signal
Pitch Encoder S[2, 3]
PB
Bend
PNR Switches S[*]
Modulation
MOD PNL
Wheel
SLD LEDs L[*], D[*]
Master
MVOL
Volume SLD signal
Sliders SLD[0-2] DM Sliders SLD[3-7]
Switches S[*]
LEDs L[*], D[*] E-bus
(IC18)
CPU (IC1)
CPU

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Operation & system control section
Audio signal section
Block diagram Power supply section

 Keyboard
CP4 STAGE CP40 STAGE

E-bus
IC

E-bus
IC

DM
CPU

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Operation & system control section
Audio signal section
Block diagram Power supply section

 Other Interface (USB, MIDI, Foot controller and Foot switch )

DJK
DM
CPU (IC1)

E-bus
(IC18)

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Operation & system control section
Audio signal section
Block diagram Power supply section

 System control & sound processing

ROM/RAM

Wave
CPU ROM/RAM

DA

CPU error detect

DC (To mute output)

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Operation & system control section
Audio signal section
Block diagram Power supply section

 Audio signal

DM

Amp

Amp

Amp
Amp
DA
Amp

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Operation & system control section
Audio signal section
Block diagram Power supply section

 Power supply (CP4 STAGE)

+15V, -15V
AC Amp Distorted or
15V No sound
Power SW DA
IC21 +5D
Power
Reg. PANEL, Keyboard, DJACK
supply
Fuse E-bus IC
IC29
STBY
DCDC +3.3D PB&MW
Standby
ROM, RAM
Control circuit
(Auto power off) IC7
Reg. CPU Not booting up
+1.2D
IC16
Hi Side
USB
SW

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Operation & system control section
Audio signal section
Block diagram Power supply section

 Power supply (CP40 STAGE)

IC400 +9A
PA-150 Reg. Amp
Distorted or
IC21 +5A
Poly SW No sound
Reg. DA
Power SW
IC28 +5D
DCDC PANEL, Keyboard, DJACK
12V IC16
E-bus IC
STBY Hi Side
USB
SW
Standby
Control circuit IC29
(Auto power off) DCDC +3.3D PB&MW
ROM, RAM
IC7
Reg. CPU
Not booting up
+1.2D
DMI CS Planning Department Yamaha Corporation All Rights Reserved
 Service Topics

How to check the CP4/40 STAGE

 Checking the settings
 Data backup, Initializing the settings
 Firmware version update
 Block diagram
 Test Program and DM Test points

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Test Program and DM test points

 Refer to the service manual.

* Similar to the CP series.
Test Program
 Memory check2 (Full address)
 Panel check (switches, LEDs,
LCD, sliders and encoders)
 USB and MIDI check
etc…

DM Test points

 Voltage checks
 Signal output checks

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Service Topics

How to disassemble the CP4/40 STAGE

1. Accessing the keyboard
2. Accessing the circuit boards

DMI CS Planning Department Yamaha Corporation All Rights Reserved

 Thank you for your attention

DMI CS Planning Department Yamaha Corporation All Rights Reserved