Scribd
Upload
234 views1 page

Vikings

This document summarizes information about various filter elements and Viking filter housings. It lists the materials that Viking housings are made of, including carbon steel with epoxy and powder coatings. It also provides part numbers and specifications for different filter elements and Viking models, including micron ratings, flow rates, pressure ratings, port sizes, and dimensions.

Uploaded by

Anggi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
234 views1 page

Vikings

This document summarizes information about various filter elements and Viking filter housings. It lists the materials that Viking housings are made of, including carbon steel with epoxy and powder coatings. It also provides part numbers and specifications for different filter elements and Viking models, including micron ratings, flow rates, pressure ratings, port sizes, and dimensions.

Uploaded by

Anggi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Vikings

Made of carbon steel


Epoxy coating inside and out
Powder coated for weatherability
Swing lid for easy access
Gauge ports for improved monitoring

Elements
E-1300-02 E-1300-10 E-1300-30
PART # 30066 PART # 30008 PART # 30009
CELLULOSE CELLULOSE CELLULOSE
MICRON
10
MICRON
30
MICRON

E-1300MG-03 E-1300MG-05 E-1300MG-10


PART # 30204 PART # 30203 PART # 30202
MICROGLASS MICROGLASS MICROGLASS
VIKING 1 VIKING 1F VIKING 2 VIKING 2F VIKING 3F VIKING 4F
10
MICRON MICRON MICRON
Part # 40186 Part # 40187 Part # 40188 Part # 40189 Part # 40190 Part # 40191
120 GPM MAX FLOW 120 GPM MAX FLOW 150 GPM MAX FLOW 150 GPM MAX FLOW 300 GPM MAX FLOW 500 GPM MAX FLOW
E-1300HS-10 E-1300HS-30 E-1300WM-144 150 PSI MAX 150 PSI MAX 150 PSI MAX 150 PSI MAX 150 PSI MAX 150 PSI MAX
PART # 30034 PART # 30037 PART # 30210 WORKING WORKING WORKING WORKING WORKING WORKING
HYDROSORB HYDROSORB WIRE MESH PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE PRESSURE
2” NPT IN/OUT FLANGED IN/OUT 2” NPT IN/OUT FLANGED IN/OUT FLANGED IN/OUT FLANGED IN/OUT
10
MICRON
30
MICRON
144
MICRON
USES 1 FILTER 2” RFSO FLANGE USES 2 FILTER 2” RFSO FLANGE 3” RFSO FLANGE 4” RFSO FLANGE
ELEMENT ELEMENTS
USES 1 FILTER USES 2 FILTER USES 4 FILTER USES 8 FILTER
11.63” WIDTH FROM ELEMENT 11.63” WIDTH FROM ELEMENTS ELEMENTS ELEMENTS
INLET TO OUTLET* INLET TO OUTLET*
Differential Pressure Gauges 31.56” LENGTH
13.5” WIDTH FROM
INLET TO OUTLET* 49.69” LENGTH
13.5” WIDTH
FROM FLANGE TO
24” WIDTH FROM
FLANGE TO
28” WIDTH FROM
FLANGE TO
FROM TOP TO FROM TOP TO FLANGE* FLANGE* FLANGE*
PART # 90601 PART # 90602 PART # 90603 BOTTOM*
31.56” LENGTH
BOTTOM*
FOR VIKING 1, FOR VIKING 4F FOR VIKING 1, FROM TOP TO 49.69” LENGTH 56.25” LENGTH 78.5” LENGTH FROM
BOTTOM* FROM TOP TO FROM TOP TO TOP TO BOTTOM*
1F, 2, 2F, 3F 1F, 2, 2F, 3F, 4F BOTTOM* BOTTOM*

 844.447.7663  www.cim-tek.com NOT FOR USE WITH AVIATION APPLICATIONS *ADDITIONAL INFORMATION AND MEASUREMENTS AVAILABLE UPON REQUEST.
REV. A 07.08.2020

You might also like