ISO 

105 consists of the following parts, under the general title Textiles  — Tests for colour fastness:
General principles:

 — Part A01: General principles of testing

 — Part A02: Grey scale for assessing change in colour
 — Part A03: Grey scale for assessing staining
 — Part A04: Method for the instrumental assessment of the degree of staining of adjacent
fabrics
 — Part A05: Instrumental assessment of change in colour for determination of grey scale
rating
 — Part A06: Instrumental determination of 1/1 standard depth of colour
 — Part A08: Vocabulary used in colour measurement
 — Part A11: Determination of colour fastness grades by digital imaging techniques (under
development)

Colour fastness to light and weathering:

 — Part B01: Colour fastness to light: Daylight

 — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
 — Part B03: Colour fastness to weathering: Outdoor exposure
 — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
 — Part B05: Detection and assessment of photochromism
 — Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc
fading lamp test
 — Part B07: Colour fastness to light of textiles wetted with artificial perspiration
 — Part B08: Quality control of blue wool reference materials 1 to 7
 — Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation (under
development)

Colour fastness to washing and laundering:

 — Part C06: Colour fastness to domestic and commercial laundering

 — Part C07: Colour fastness to wet scrubbing of pigment printed textiles
 — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate
reference detergent incorporating a low temperature bleach activator
 — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach
response using a non-phosphate reference detergent incorporating a low temperature bleach
activator
 — Part C10: Colour fastness to washing with soap or soap and soda
 — Part C12: Colour fastness to industrial laundering

Colour fastness to dry cleaning:

 — Part D01: Colour fastness to dry cleaning using perchloroethylene solvent

 — Part D02: Colour fastness to rubbing: Organic solvents

Colour fastness to aqueous agents:

 — Part E01: Colour fastness to water

 — Part E02: Colour fastness to sea water
 — Part E03: Colour fastness to chlorinated water (swimming-pool water)
 — Part E04: Colour fastness to perspiration
 — Part E05: Colour fastness to spotting: Acid
 — Part E06: Colour fastness to spotting: Alkali
 — Part E07: Colour fastness to spotting: Water
  — Part E08: Colour fastness to hot water
 — Part E09: Colour fastness to potting
 — Part E10: Colour fastness to decatizing
 — Part E11: Colour fastness to steaming
 — Part E12: Colour fastness to milling: Alkaline milling
 — Part E13: Colour fastness to acid-felting: Severe
 — Part E14: Colour fastness to acid-felting: Mild
 — Part E16: Colour fastness to water spotting on upholstery fabrics

Standard adjacent fabrics:

 — Part F01: Specification for wool adjacent fabric

 — Part F02: Specification for cotton and viscose adjacent fabrics
 — Part F03: Specification for polyamide adjacent fabric
 — Part F04: Specification for polyester adjacent fabric
 — Part F05: Specification for acrylic adjacent fabric
 — Part F06: Specification for silk adjacent fabric
 — Part F07: Specification for secondary acetate adjacent fabric
 — Part F09: Specification for cotton rubbing cloth
 — Part F10: Specification for adjacent fabric: Multifibre

Colour fastness to atmospheric contaminants:

 — Part G01: Colour fastness to nitrogen oxides

 — Part G02: Colour fastness to burnt-gas fumes
 — Part G03: Colour fastness to ozone in the atmosphere
 — Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities

Measurement of colour and colour differences:

 — Part J01: General principles for measurement of surface colour

 — Part J02: Instrumental assessment of relative whiteness
 — Part J03: Calculation of colour differences
 — Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen
with change in illuminant (CMCCON02)

Colour fastness to bleaching agencies:

 — Part N01: Colour fastness to bleaching: Hypochlorite

 — Part N02: Colour fastness to bleaching: Peroxide
 — Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
 — Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
 — Part N05: Colour fastness to stoving

Colour fastness to heat treatments:

 — Part P01: Colour fastness to dry heat (excluding pressing)

 — Part P02: Colour fastness to pleating: Steam pleating

Colour fastness to vulcanization:

 — Part S01: Colour fastness to vulcanization: Hot air

 — Part S02: Colour fastness to vulcanization: Sulfur monochloride
 — Part S03: Colour fastness to vulcanization: Open steam
Miscellaneous tests:

 — Part X01: Colour fastness to carbonizing: Aluminium chloride

 — Part X02: Colour fastness to carbonizing: Sulfuric acid
 — Part X04: Colour fastness to mercerizing
 — Part X05: Colour fastness to organic solvents
 — Part X06: Colour fastness to soda boiling
 — Part X07: Colour fastness to cross-dyeing: Wool
 — Part X08: Colour fastness to degumming
 — Part X09: Colour fastness to formaldehyde
 — Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
 — Part X11: Colour fastness to hot pressing
 — Part X12: Colour fastness to rubbing
 — Part X13: Colour fastness of wool dyes to processes using chemical means for creasing,
pleating and setting
 — Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
 — Part X16: Colour fastness to rubbing—Small areas
 — Part X18: Assessment of the potential to phenolic yellowing of materials

Colorant characteristics:

 — Part Z01: Colour fastness to metals in the dye-bath: Chromium salts

 — Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
 — Part Z03: Intercompatibility of basic dyes for acrylic fibres
 — Part Z04: Dispersibility of disperse dyes
 — Part Z05: Determination of the dusting behaviour of dyes
 — Part Z06: Evaluation of dye and pigment migration
 — Part Z07: Determination of application solubility and solution stability of water-soluble dyes
 — Part Z08: Determination of solubility and solution stability of reactive dyes in the presence
of electrolytes
 — Part Z09: Determination of cold water solubility of water-soluble dyes
 — Part Z10: Determination of relative colour strength of dyes in solution
 — Part Z11: Evaluation of speckiness of colorant dispersions