MIG/MAG

TORCHES
MIG/MAG torches
Simplify
your life

The 3 main considerations for choosing a MIG torch are:

• Reliability : Weldline torches have been designed to meet the rigorous demands of today’s
welding environment, giving quality and reliability.
• Standardisation of the wear parts: Weldline torches are compatible with the most
common wear parts sold in Europe.
• Flexibility: Weldline torches are equipped with a very flexible coaxial cable and a knuckle
joint witch reduces the strain on the operative

Air cooled torches:

Name Duty cycle General use Max wire Ø
at 60% (mm)
WMT 15A 180 A Thin plates, automotive industry 1.0
WMT 25A 230 A Thin plates, light fabrication 1.2
WMT 36A 340 A Vessel manufacture, steel structures 1.6

Water cooled torches:

Name Duty cycle General use Max wire Ø
at 100% (mm)
WMT 500W 500 A Heavy duty, high production 2.4

WELDLINE is a SPS (Air Liquide Welding Group) trademark PROFESSIONAL WELDING PRODUCTS BY
WMT 15 A
MIG-MAG Welding torch

Applications:
Car body, limited access welding, etc.

Advantages for clients:

 Easy manoeuvrability
2570-28

2004-630
(pivoted handle)

Technical specifications:  European standard

Cooling: Air connections

2004-628
60% duty cycle:
- 180 A with C1 (EN 439): CO2
- 150 A with M21 (EN 439): Ar + CO2 Ordering information:
Voltage class: L-113 V
Compliance standard: EN 60974 -7 WMT 15A 3m: CAT. N° W 000 010 600
Usable wires: WMT 15A 4m: CAT. N° W 000 010 601
- 0.6 to 1.0-mm diameter steel wire
Gas flow rate: 10 to 18 l/min
Main wear parts:
Original equipment: Contact tube for 0.8-mm
dia. steel wire, 12.5-mm dia. conical nozzle and
wear conduit for 0.6 to 0.8-mm dia. steel wire  Wear parts compatible with the most
common standard in Europe.

CAT. N° Description
W 000 010 786 Conical nozzle 12.5 dia. WMT 15A
2004
-615
W 000 010 787 Conical nozzle 10.0 dia. WMT 15A
W 000 010 788 Cylindrical nozzle 16.0 dia. WMT 15A

CAT. N° Description CAT. N° Description

0807-59

W 000 010 820 Contact tube M6x25 0.6 Cu WMT 15A W 000 010 730 Wear conduit, steel spirals 0.6-0.8 3M
W 000 010 821 Contact tube M6x25 0.8 Cu WMT 15A W 000 010 731 Wear conduit, steel spirals 0.6-0.8 4M
W 000 010 822 Contact tube M6x25 1.0 Cu WMT 15A W 000 010 733 Wear conduit, steel spirals 1.0-1.2 3M
W 000 010 823 Contact tube M6x25 0.6 CuCrZr WMT 15A W 000 010 734 Wear conduit, steel spirals 1.0-1.2 4M
W 000 010 824 Contact tube M6x25 0.8 CuCrZr WMT 15A
W 000 010 825 Contact tube M6x25 1.0 CuCrZr WMT 15A

Tel. : + 33 134 213 223 - Web : www.weldline-alw.com WELDLINE is a SPS (Air Liquide Welding Group) trademark 11-1
Ed.2
SPS reserves itself the right to embody modifications without prior notice.
The illustrations, descriptions and characteristics are given for information only and do not PROFESSIONAL WELDING PRODUCTS BY
engage the responsibility of the constructor.
 WMT 25A
MIG-MAG Welding torch

Applications:
Blacksmith work, thin steel and fabrication, etc.

Advantages for clients:

 Easy manoeuvrability

2003-384

2004-630
(pivoted handle)

Technical specifications:  European standard

Cooling: Air
connections

2004-628
60% duty cycle:
- 230 A with C1 (EN 439): CO2,
Ordering information:
- 200 A with M21 (EN 439): Ar + CO2
Voltage class: L-113 V
WMT 25A 3m: CAT. N° W 000 010 602
Compliance standard: EN 60974 -7
Usable wires: WMT 25A 4m: CAT. N° W 000 010 603
- 0.8 to 1.2-mm diameter steel wire WMT 25A 5m: CAT. N° W 000 010 604
- 1.0 to 1.2-mm diameter aluminium wire
Gas flow rate: 10 to 18 l/min
Main wear parts:
Original equipment: Contact tube for 1.0-mm
dia. steel wire, 14.0-mm dia. conical nozzle and  Wear parts compatible with the most
wear conduit for 1.0 to 1.2-mm dia. steel wire
common standard in Europe.

CAT. N° Description
W 000 010 720 Contact tube support M6x35
2004
-618

CAT. N° Description
Conical nozzle
W 000 010 790
14.0 dia. WMT 25A
Conical nozzle
W 000 010 791
12.0 dia. WMT 25A
Cylindrical nozzle
W 000 010 792
17.0 dia. WMT 25A
CAT. N° Description
0807-59

W 000 010 730 Wear conduit, steel spirals 0.6-0.8 3M

W 000 010 731 Wear conduit, steel spirals 0.6-0.8 4M
W 000 010 732 Wear conduit, steel spirals 0.6-0.8 5M
W 000 010 733 Wear conduit, steel spirals 1.0-1.2 3M
W 000 010 734 Wear conduit, steel spirals 1.0-1.2 4M
W 000 010 735 Wear conduit, steel spirals 1.0-1.2 5M
CAT. N° Description
W 000 010 736 Wear conduit, Teflon 1.0-1.2 3M
W 000 010 826 Contact tube M6x28 0.8 Cu
W 000 010 737 Wear conduit, Teflon 1.0-1.2 4M
W 000 010 827 Contact tube M6x28 1.0 Cu
W 000 010 738 Wear conduit, Teflon 1.0-1.2 5M
W 000 010 828 Contact tube M6x28 1.2 Cu
W 000 010 830 Contact tube M6x28 0.8 CuCrZr
W 000 010 831 Contact tube M6x28 1.0 CuCrZr
W 000 010 832 Contact tube M6x28 1.2 CuCrZr
W 000 010 850 Contact tube M6x28 1.0 Al wire
W 000 010 851 Contact tube M6x28 1.2 Al wire

11-2 Tel. : + 33 134 213 223 - Web : www.weldline-alw.com WELDLINE is a SPS (Air Liquide Welding Group) trademark
Ed.2
SPS reserves itself the right to embody modifications without prior notice.
The illustrations, descriptions and characteristics are given for information only and do not PROFESSIONAL WELDING PRODUCTS BY
engage the responsibility of the constructor.
WMT 36A
MIG-MAG Welding torch

Applications:
Pressure vessels, mechanical welding, structural steel work,
etc.

Advantages for clients:

2000-514

2004-630
 Easy manoeuvrability
(pivoted handle)
Technical specifications:
Cooling: Air
 European standard
connections

2004-628
60% duty cycle:
- 360 A with C1 (EN 439): CO2,
- 330 A with M21 (EN 439): Ar + CO2 Ordering information:
Voltage class: L-113 V
Compliance standard: EN 60974 -7 WMT 36A 3m: CAT. N° W 000 010 605
Usable wires: WMT 36A 4m: CAT. N° W 000 010 606
- 0.8 to 1.6-mm diameter steel wire
- 1.0 to 1.6-mm diameter aluminium wire
WMT 36A 5m: CAT. N° W 000 010 607
Gas flow rate: 10 to 18 l/min
Main wear parts:
Original equipment: Contact tube for 1.2-mm
dia. steel wire, 16.0-mm dia. conical nozzle and  Wear parts compatible with the most
wear conduit for 1.0 to 1.2-mm dia. steel wire
common standard in Europe.
CAT. N° Description
W 000 010 780 Insulating diffuser WMT 36A
W 000 010 781 High-temperature insulating diffuser WMT 36A 2004-6
21
W 000 010 782 Ceramic insulating diffuser WMT 36A

CAT. N° Description
Conical nozzle
0807-59

W 000 010 794

16.0 dia. WMT 36A
Conical nozzle
W 000 010 795
14.0 dia. WMT 36A
Cylindrical nozzle
W 000 010 796
20 dia. WMT 36A
CAT. N° Description
W 000 010 730 Wear conduit, steel spirals 0.6-0.8 3M
CAT. N° Description
W 000 010 731 Wear conduit, steel spirals 0.6-0.8 4M
Contact tube support
W 000 010 722 W 000 010 732 Wear conduit, steel spirals 0.6-0.8 5M
M8x28
W 000 010 733 Wear conduit, steel spirals 1.0-1.2 3M
W 000 010 734 Wear conduit, steel spirals 1.0-1.2 4M
CAT. N° Description
W 000 010 735 Wear conduit, steel spirals 1.0-1.2 5M
W000010834 Contact tube M6x30 0.8 Cu
W000010835 Contact tube M6x30 1.0 Cu W 000 010 867 Wear conduit, steel spirals 1.6 3M
W000010836 Contact tube M6x30 1.2 Cu W 000 010 868 Wear conduit, steel spirals 1.6 4M
W000010837 Contact tube M6x30 1.6 Cu W 000 010 869 Wear conduit, steel spirals 1.6 5M
W000010840 Contact tube M6x30 0.8 CuCrZr W 000 010 736 Wear conduit, Teflon 1.0-1.2 3M
W000010841 Contact tube M6x30 1.0 CuCrZr W 000 010 737 Wear conduit, Teflon 1.0-1.2 4M
W000010842 Contact tube M6x30 1.2 CuCrZr
W 000 010 738 Wear conduit, Teflon 1.0-1.2 5M
W000010843 Contact tube M6x30 1.6 CuCrZr
W 000 010 745 Wear conduit, Teflon 1.6 3M
W000010853 Contact tube M6x30 1.0 Al wire
W000010854 Contact tube M6x30 1.2 Al wire W 000 010 746 Wear conduit, Teflon 1.6 4M
W000010855 Contact tube M6x30 1.6 Al wire W 000 010 747 Wear conduit, Teflon 1.6 5M

Tel. : + 33 134 213 223 - Web : www.weldline-alw.com WELDLINE is a SPS (Air Liquide Welding Group) trademark 11-3
Ed.2
SPS reserves itself the right to embody modifications without prior notice.
The illustrations, descriptions and characteristics are given for information only and do not PROFESSIONAL WELDING PRODUCTS BY
engage the responsibility of the constructor.
 WMT 500W
MIG-MAG Welding torch
1415-76

Applications:
Pressure vessels, structural steel work,
heavy duty applications, etc.

Advantages for clients:

2004-630
 Easy manoeuvrability
(pivoted handle)

Technical specifications:
 European standard
Cooling: Water connections

2004-628
100% duty cycle:
- 500 A with C1 (EN 439): CO2,
- 450 A with M21 (EN 439): Ar + CO2 Ordering information:
Voltage class: L-113 V WMT 500W 3m: CAT. N° W 000 010 608
Compliance standard: EN 60974 -7
Usable wires: WMT 500W 4m: CAT. N° W 000 010 609
- 0.8 to 2.4-mm diameter steel wire WMT 500W 5m: CAT. N° W 000 010 610
- 1.0 to 2.4-mm diameter aluminium wire
Gas flow rate: 10 to 25 l/min Main wear parts:
Original equipment: Contact tube for 1.2-mm
dia. steel wire, 16.5-mm dia. conical nozzle and  Wear parts compatible with the most
wear conduit for 1.0 to 1.2-mm dia. steel wire common standard in Europe.

CAT. N° Description CAT. N° Description

Conical nozzle W 000 010 748 Insulating washer 2004
W 000 010 797 -624
16.5 dia. WMT 500W
Conical nozzle
W 000 010 798
14.5 dia. WMT 500W
Cylindrical nozzle
W 000 010 799
20.0 dia. WMT 500W
0807-59

CAT. N° Description
W 000 010 730 WC* steel spirals 0.6-0.8 3M
W 000 010 731 WC* steel spirals 0.6-0.8 4M
W 000 010 732 WC* steel spirals 0.6-0.8 5M
W 000 010 733 WC* steel spirals 1.0-1.2 3M
CAT. N° Description W 000 010 734 WC* steel spirals 1.0-1.2 4M
W 000 010 724 CT* support M8x25 W 000 010 735 WC* steel spirals 1.0-1.2 5M
W 000 010 739 WC* steel spirals 1.6 3M WMT water
CAT. N° Description W 000 010 740 WC* steel spirals 1.6 4M WMT water
W 000 010 783 Insulating diffuseur WMT 500W W 000 010 741 WC* steel spirals 1.6 5M WMT water
W 000 010 784 High-temperature insulating diffuser WMT 500W W 000 010 742 WC* steel spirals 2.0-2.4 3M WMT water
W 000 010 785 Ceramic insulating diffuseur WMT 500W W 000 010 743 WC* steel spirals 2.0-2.4 4M WMT water
W 000 010 744 WC* steel spirals 2.0-2.4 5M WMT water
CAT. N° Description CAT. N° Description W 000 010 736 WC* Teflon 1.0-1.2 3M
W 000 010 834 CT* M8x30 0.8 Cu W 000 010 843 CT* M8x30 1.6 CuCrZr W 000 010 737 WC* Teflon 1.0-1.2 4M
W 000 010 835 CT* M8x30 1.0 Cu W 000 010 844 CT* M8x30 2.0 CuCrZr W 000 010 738 WC* Teflon 1.0-1.2 5M
W 000 010 836 CT* M8x30 1.2 Cu W 000 010 845 CT* M8x30 2.4 CuCrZr W 000 010 745 WC* Teflon 1.6 3M
W 000 010 837 CT* M8x30 1.6 Cu W 000 010 853 CT* M8x30 1.0 Al wire W 000 010 746 WC* Teflon 1.6 4M
W 000 010 838 CT* M8x30 2.0 Cu W 000 010 854 CT* M8x30 1.2 Al wire W 000 010 747 WC* Teflon 1.6 5M
W 000 010 839 CT* M8x30 2.4 Cu W 000 010 855 CT* M8x30 1.6 Al wire W 000 010 817 WC* Teflon 2.0-2.4 3M
W 000 010 840 CT* M8x30 0;8 CuCrZr W 000 010 856 CT* M8x30 2.0 Al wire W 000 010 818 WC* Teflon 2.0-2.4 4M
W 000 010 841 CT* M8x30 1.0 CuCrZr W 000 010 857 CT* M8x30 2.4 Al wire W 000 010 819 WC* Teflon 2.0-2.4 5M
W 000 010 842 CT* M8x30 1.2 CuCrZr *CT : Contact Tube *WC: Wear Conduit

11-4 Tel. : + 33 134 213 223 - Web : www.weldline-alw.com WELDLINE is a SPS (Air Liquide Welding Group) trademark
Ed.2
SPS reserves itself the right to embody modifications without prior notice.
The illustrations, descriptions and characteristics are given for information only and do not PROFESSIONAL WELDING PRODUCTS BY
engage the responsibility of the constructor.