John Deere 6620 Parts Catalog

1A2
Full download: http://manualplace.com/download/john-deere-6620-parts-catalog/
6620 COMBINE

HP1469 -UN-01JAN94

JOHN DEERE 6620 COMBINE WITH 653 ROW-CROP HEAD

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

6620 COMBINE PC1666 (23-OCT-90) 10-1

PN=1
This is the cut pages sample. Download all 1265 page(s) at: ManualPlace.com
 1A3 6620 COMBINE

NOTE

IN ADDITION TO TITAN COMBINES, PARTS INFORMATION FOR TITAN II COMBINES IS ALSO LOCATED IN THIS
CATALOG. SERIAL NUMBER (610301- ) INDICATES TITAN II PARTS.

FOR 200 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 200 SERIES PLATFORM PARTS
CATALOG - PC-1558.

FOR 900 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 900 SERIES PLATFORM PARTS
CATALOG - PC-2104

FOR 40 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 40 SERIES CORN HEAD PARTS
CATALOG - PC-1223.

FOR 50 SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50 SERIES ROW-CROP
HEAD PARTS CATALOG - PC-1549.

FOR 50A SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50A SERIES ROW-CROP
HEAD PARTS CATALOG - PC-1747.

FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP
PARTS CATALOG - PC-1189 (200 SERIES) OR PC-2210 (900 SERIES)

IMPORTANT

THIS PARTS CATALOG CONTAINS PARTS INFORMATION FOR THE 6620 COMBINE. MACHINE VINTAGE
IS DETERMINED BY THE COMBINE SERIAL NUMBER OR THE PRODUCT IDENTIFICATION NUMBER (PIN).
IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.

10-2 6620 COMBINE PC1666 (23-OCT-90)

PN=2
 1A4 6620 COMBINE

SERIAL NUMBER AND PRODUCT IDENTIFICATION NUMBER (PIN) PLATES

USE ALL NUMBERS, LETTERS AND SPACES SHOWN ON THE SERIAL NUMBER PLATE OR THE PRODUCT
IDENTIFICATION NUMBER PLATE IN WARRANTY CORRESPONDENCE.

COMBINES ( -551900)

ON THESE COMBINES, THE SERIAL NUMBER PLATE IS LOCATED ON THE REAR LEFT-HAND UPRIGHT.

AN EXAMPLE OF THE SERIAL NUMBER ON THIS PLATE IS:

E6620551900H

E - EQUIPMENT
6620 - COMBINE MODEL
551900 - COMBINE SEPARATOR SERIAL NUMBER
H - MANUFACTURING UNIT (HARVESTER WORKS)

COMBINES (551901- )

ON THESE COMBINES, THE PRODUCT IDENTIFICATION PLATE (PIN) IS LOCATED NEAR THE RIGHT-HAND
SIDE OF THE TOOL BOX. AN EXAMPLE OF THE TWO-LINES ON THIS PIN PLATE IS:

H06620X551901
COMBINE

(FIRST LINE)
H0 - MANUFACTURING UNIT (HARVESTER WORKS)
6620 - MODEL IDENTIFIER
X - CONFIGURATION CODE/MODEL IDENTIFIER SUFFIX
551901 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN

(SECOND LINE)
COMBINE - TYPE OF PRODUCT

6620 COMBINE PC1666 (23-OCT-90) 10-3

PN=3
 1A5 6620 COMBINE

ENGINE SERIAL NUMBER

THE ENGINE SERIAL NUMBER PLATE IS LOCATED ON THE RIGHT-HAND SIDE OF THE ENGINE BLOCK.

ENGINES ( -227599)

AN EXAMPLE OF THE ONE-LINE, SIXTEEN-DIGIT NUMBER ON THIS SERIAL NUMBER PLATE IS:

6466TH01227599RG

6 - NUMBER OF CYLINDERS
466 - CUBIC INCH DISPLACEMENT
T - FUEL TYPE (TURBOCHARGED DIESEL)
H - MANUFACTURING UNIT OF MACHINE (HARVESTER WORKS)
01 - ENGINE VERSION
227599 - ENGINE SERIAL NUMBER
RG - MANUFACTURING UNIT OF ENGINE (JOHN DEERE ENGINE WORKS)

ENGINES (227600- )

AN EXAMPLE OF THE TWO-LINE NUMBER ON THIS SERIAL NUMBER PLATE IS:

RG6466A227600
6466TH05

(FIRST LINE)
RG - MANUFACTURING UNIT (JOHN DEERE ENGINE WORKS)
6 - NUMBER OF CYLINDERS
466 - CUBIC INCH DISPLACEMENT
A - CONFIGURATION CODE/MODEL IDENTIFIER SUFFIX
227600 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN

(SECOND LINE)
6 - NUMBER OF CYLINDERS
466 - CUBIC INCH DISPLACEMENT
T - FUEL TYPE (TURBOCHARGED DIESEL)
H - MANUFACTURING UNIT OF MACHINE (HARVESTER WORKS)
05 - ENGINE VERSION

PARTS LISTING INFORMATION

SERIAL NUMBER OR PRODUCT IDENTIFICATION NUMBER (PIN) INFORMATION SHOWS ON WHICH MACHINES A
PART MAY BE USED. FOR EXAMPLE:

- THE PART CAN BE USED ON ALL MACHINES.

-000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED.

000000- THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED.

000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS
LISTED.

WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER WAS MADE, BUT THE
EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRINTED.

10-4 6620 COMBINE PC1666 (23-OCT-90)

PN=4
 1A6 6620 COMBINE

DIRECTION ARROW

ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFT-
HAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS

A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A
SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS

KIT INFORMATION WILL BE FOUND IMMEDIATELY FOLLOWING THE STORY IN WHICH IT IS USED.
THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUT AND WITH ALL OTHER
PARTS SHOWN IN PHANTOM FOR RELATIONSHIP.

JDM REMANUFACTURED COMPONENTS

THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL
EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED
COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE
PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION

BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE
IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP
SCREWS ARE SAE GRADE 5 OR LOWER.

COMPLETE GOODS LISTINGS

COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON
REPLACEMENT PARTS ORDER.

SI UNITS OF MEASURE

METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS

THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS:

DIAL-A-MATIC™ TORQ-GARD SUPREME®

HARVESTRAK™ QUIK-TATCH™
POSI-TORQ™

CHANGE INDICATOR LINE

(MICROFICHE CATALOGS ONLY)

CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND
MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME
PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

6620 COMBINE PC1666 (23-OCT-90) 10-5

PN=5
 1A7 6620 COMBINE

SECTIONAL INDEX

SECTION

GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

BASIC ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

FUEL AND AIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

POWER TRAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

STEERING AND BRAKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

SEPARATOR SHELL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

OPERATOR’S STATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

HEADERS - REFER TO INDIVIDUAL HEADER PARTS CATALOGS . . . . . . . . . . . . . . . . . . . . . 100

FEEDER HOUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

SEPARATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

GRAIN TANK AND UNLOADING AUGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

MAJOR DRIVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

SIDEHILL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

HEADER HEIGHT CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

DECALS, BELTS AND CHAINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

NUMERICAL INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

10-6 6620 COMBINE PC1666 (23-OCT-90)

PN=6
 1A8 6620 COMBINE
ALPHABETICAL INDEX

GRID PAGE GRID PAGE

A 8C17 AUGER, SWIVEL, HORIZONTAL UNLOADING .................. 130 - 33
8C20 AUGER, UNLOADING, LUBE BANK SYSTEM.................... 130 - 36
2D2 ACCESSORIES, INSTRUMENT PANEL .............................. 40 - 43 2B14 AUGER, UNLOADING, WIRING HARNESS ........................ 40 - 3
2C3 ACCUMULATOR PRESSURE GAUGE ................................ 40 - 20 7I6 AUGER, UPPER TAILINGS .................................................. 120 - 176
4I7 ACCUMULATOR,PRESSURE CONTROL VALVE .............. 70 - 121 8C13 AUGER, VERTICAL, LOWER GEAR CASE ........................ 130 - 29
1F7 ADAPTER, ENGINE COOLANT HEATER............................ 20 - 97 8C11 AUGER,CROSS,DRIVE TIGHTENERS,GRAIN TANK ........ 130 - 27
4C11 ADJUSTABLE REAR AXLE, HEAVY-DUTY 7H12 AUGER,LOADING,DIP AND POUR ELEV.GR.TANK .......... 120 - 156
(FOUR-WHEEL DRIVE) .................................................... 60 - 27 7F3 AUGERS, HOUSING, SHOE GRAIN SUPPLY .................... 120 - 95
1G12 AIR CLEANER ...................................................................... 30 - 19 7F7 AUGERS, SHOE GRAIN SUPPLY, DRIVE SHAFT ............ 120 - 99
1G13 AIR CLEANER TO MANIFOLD ............................................ 30 - 20 7F5 AUGERS, SUPPLY, SHOE GRAIN ...................................... 120 - 97
5E15 AIR CONDITIONER EVAPORATOR .................................... 90 - 59 8F2 AUTO.HDR.HEIGHT CONTROL WIRING HARNESS.......... 160 - 11
5E15 AIR CONDITIONER EXPANSION VALVE............................ 90 - 59 8E19 AUTO.HEADER HEIGHT CONTROL CHECK BLOCK ........ 160 - 1
5E3 AIR CONDITIONER HI PRESSURE SWITCH .................... 90 - 45 8E24 AUTOMATIC HDR.HGT.CTL.DROP RATE VALVE ............ 160 - 7
5E11 AIR CONDITIONER LINES .................................................. 90 - 55 8E24 AUTOMATIC HDR.HGT.CTL.FULL FLOW PLUG ................ 160 - 7
5E12 AIR CONDITIONER LINES .................................................. 90 - 56 8E24 AUTOMATIC HDR.HGT.CTL.HYDRAULIC OIL LINE .......... 160 - 7
5E15 AIR CONDITIONER LINES .................................................. 90 - 59 8F2 AUTOMATIC HEADER HEIGHT CONTROL LINKAGE ...... 160 - 11
5E1 AIR CONDITIONING - KIT, O-RING .................................... 90 - 43 8F6 AUTOMATIC HEADER HEIGHT CONTROL SWITCH ........ 160 - 15
5D23 AIR CONDITIONING COMPRESSOR .................................. 90 - 40 8E19 AUTOMATIC HEADER HEIGHT CONTROL VALVE .......... 160 - 1
7G3 AIR DUCTS, CLEANING FAN .............................................. 120 - 121 4C19 AXLE MOUNTING AND T-WEIGHTS, REAR ...................... 60 - 36
5D20 AIR FILTER, CAB.................................................................. 90 - 37 3B25 AXLE SPACERS.................................................................... 50 - 11
1G10 AIR INTAKE TUBES (PRECLNR.TO AIR CLNR.) .............. 30 - 16 4D3 AXLE SPINDLE HOUSINGS,REAR-(HEAVY-DUTY) .......... 60 - 44
1G11 AIR INTAKE TUBES (PRECLNR.TO AIR CLNR.) .............. 30 - 17 4D2 AXLE SPINDLES, REAR ...................................................... 60 - 43
1G13 AIR INTAKE TUBES (6466DH-01) ...................................... 30 - 20 3B23 AXLE, DRIVE WHEEL .......................................................... 50 - 9
1G14 AIR INTAKE TUBES (6466TH-01)........................................ 30 - 21 3B24 AXLE, DRIVE WHEEL (SH) .................................................. 50 - 10
5D18 AIR LOUVER AND PANEL .................................................. 90 - 35 3C17 AXLE, FINAL DRIVE ............................................................ 50 - 29
7F12 AIRFOIL CHAFFER, NON-ADJUSTABLE ............................ 120 - 104 3C21 AXLE, FINAL DRIVE (SH) .................................................... 50 - 33
2E6 ALTERNATOR (72 AMP) ...................................................... 40 - 74 4C22 AXLE, REAR (ADJUSTABLE) .............................................. 60 - 39
2E12 ALTERNATOR ADJUSTING STRAP .................................... 40 - 80 4C21 AXLE, REAR (FIXED) .......................................................... 60 - 38
2E12 ALTERNATOR BRACKET .................................................... 40 - 80 4C24 AXLE, REAR (HEAVY-DUTY AND FOUR-WHL DR.).......... 60 - 41
2E10 ALTERNATOR SHEAVE AND BELT.................................... 40 - 78 4C16 AXLE, REAR, TRASH SHIELD ............................................ 60 - 33
2E8 ALTERNATOR, 90 AMP........................................................ 40 - 76 4C23 AXLE,REAR (HVY-DUTY AND FOUR-WHL DR.)................ 60 - 40
2E11 ALTERNATOR, 90 AMP........................................................ 40 - 79
2E4 AM PUSH-BUTTON RADIO .................................................. 40 - 71
2E4 AM-FM PUSH-BUTTON RADIO............................................ 40 - 71 B
8F5 AMPLIFIER, DIAL-A-MATIC HDR.HGT.CONTROL.............. 160 - 14
2D12 ANTENNA, PUSH BUTTON RADIO .................................... 40 - 55 8B21 BAFFLE, GRAIN TANK SUMP ............................................ 130 - 12
2D12 ANTENNA, TAPE PLAYER .................................................. 40 - 55 7D21 BAR, SHEAR, CYLINDER .................................................... 120 - 62
7D16 ARM, BEATER DRIVE (DUAL-RANGE CYLINDER 2C7 BATTERY CABLES .............................................................. 40 - 24
DRIVE)(100 PER CENT BEATER SPEED) .................... 120 - 57 2C7 BATTERY MOUNTINGS ...................................................... 40 - 24
7C5 ARM, CONCAVE ADJUSTING SHAFT ................................ 120 - 19 3C16 BEARING CAP, FINAL DRIVE ............................................ 50 - 28
7D1 ARM, DUAL-RANGE CYLINDER DRIVE TIGHTENER ...... 120 - 40 3C20 BEARING CAP, FINAL DRIVE (SH) .................................... 50 - 32
7C23 ARM, LOCKOUT, DUAL-RANGE CYLINDER DRIVE.......... 120 - 37 3H17 BEARING, CAM LOBE MOTOR .......................................... 50 - 166
3D16 ARM, PROPULSION-DRIVE ................................................ 50 - 55 3E13 BEARING, HYDRO. DR. PUMP (SUNDSTRAND) .............. 50 - 79
4D4 ARM, STEERING (FOUR-WHEEL DRIVE) .......................... 60 - 45 3E15 BEARING, HYDRO. DRIVE PUMP (EATON) ...................... 50 - 81
6E22 ARM,F.H.VAR.DR.MIDDLE BELT TGHTNR-SH .................. 110 - 89 3E14 BEARING, HYDROSTATIC DRIVE (SUNDSTRAND) .......... 50 - 80
6E20 ARM,IDLER,FDR.HSE.LOWER BELT TGHTNR-SH ............ 110 - 87 3H10 BEARINGS, CAM LOBE MOTOR ........................................ 50 - 158
2E14 ARMATURE, STARTER (DH) .............................................. 40 - 82 3G12 BEARINGS, CRAWLER ........................................................ 50 - 131
5D6 ARMREST (PERSONAL POSTURE SEAT) ........................ 90 - 22 3G14 BEARINGS, CRAWLER ........................................................ 50 - 133
1D14 ARMS, ROCKER (DH) .......................................................... 20 - 53 3G16 BEARINGS, CRAWLER DRIVE ............................................ 50 - 135
3H22 ARMS, STEERING, CAM LOBE MOTOR ............................ 50 - 172 3C17 BEARINGS, FINAL DRIVE.................................................... 50 - 29
5D10 ASH TRAY ............................................................................ 90 - 26 3C18 BEARINGS, FINAL DRIVE.................................................... 50 - 30
1G15 ASPIRATOR .......................................................................... 30 - 22 3C21 BEARINGS, FINAL DRIVE (SH) .......................................... 50 - 33
1G16 ASPIRATOR .......................................................................... 30 - 23 3C22 BEARINGS, FINAL DRIVE (SH) .......................................... 50 - 34
8C15 AUGER AND HOUSING, VERTICAL, GRAIN TANK .......... 130 - 31 3C23 BEARINGS, FINAL DRIVE (SH) .......................................... 50 - 35
8C21 AUGER DRIVE GEAR CASE,HORIZONTAL UNLDG. ........ 130 - 37 3E23 BEARINGS, HYDRO. DR. PUMP (SUNDSTRAND) ............ 50 - 89
2B15 AUGER LIGHT, UNLOADING .............................................. 40 - 5 1C20 BEARINGS, MAIN.................................................................. 20 - 33
4G5 AUGER SWING HYDRAULIC HOSES,UNLOADING .......... 70 - 66 7I3 BEARINGS, TAILINGS ELEVATOR CONVEYOR................ 120 - 172
4G7 AUGER SWING HYDRAULIC HOSES,UNLOADING .......... 70 - 68 7I4 BEARINGS, TAILINGS ELEVATOR CONVEYOR................ 120 - 173
8B18 AUGER SWIVEL SHROUD,HORIZONTAL UNLOADING.... 130 - 9 3C8 BEARINGS, TRANSMISSION .............................................. 50 - 19
8C2 AUGER, CROSS, FRONT, GRAIN TANK ............................ 130 - 17 3C10 BEARINGS, TRANSMISSION .............................................. 50 - 21
8C3 AUGER, CROSS, REAR, GRAIN TANK .............................. 130 - 18 3E24 BEARINGS,HYDRO. DRIVE PUMP (EATON) .................... 50 - 90
8C23 AUGER, HORIZONTAL UNLOADING .................................. 130 - 39 8G5 BEATER AND CYLINDER TACHOMETER.......................... 170 - 18
7G21 AUGER, LOADING ................................................................ 120 - 139 7D9 BEATER AND TACHOMETER DRIVE ................................ 120 - 49
7H19 AUGER, LOWER TAILINGS ................................................ 120 - 163 7D10 BEATER AND TACHOMETER DRIVE ................................ 120 - 50
7H20 AUGER, LOWER TAILINGS ................................................ 120 - 164 7D12 BEATER BEARING LUBE BANK SYSTEM-RH SIDE ........ 120 - 52
7G7 AUGER, LOWER, CLEAN GRAIN........................................ 120 - 125 7D13 BEATER BEARING LUBE BANK, LH-HYDRO. .................. 120 - 53
7H2 AUGER, LOWER, DIP AND POUR ELEVATOR ................ 120 - 145 7D14 BEATER BEARING LUBE BANK,LH (POSI)........................ 120 - 55
6620 COMBINE PC1666 (18-APR-00) 10-7
PN=7
 1A9 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

7D9 BEATER BELT ...................................................................... 120 - 49 8D11 BELTS, PRIMARY COUNTERSHAFT SHEAVES
7D10 BEATER BELT ...................................................................... 120 - 50 (DUAL-RANGE CYLINDER DRIVE) ................................ 140 - 12
8G5 BEATER BELT ...................................................................... 170 - 18 8G17 BELTS,DRIVE,ENGINE TO PRIMARY CTRSHAFT............. 170 - 32
7D15 BEATER DRIVE .................................................................... 120 - 56 8F19 BELTS,DRIVE,FEEDER HOUSE (VARIABLE DR.) ............ 170 - 7
7D17 BEATER DRIVE .................................................................... 120 - 58 8G8 BELTS,DRIVE,SHOE GRAIN SUPPLY AUGERS ................ 170 - 22
7D18 BEATER DRIVE (DUAL-RANGE CYLINDER DRIVE) ........ 120 - 59 8F16 BELTS,HYDROSTATIC GROUND DRIVE............................ 170 - 4
7D16 BEATER DRIVE, DUAL-RANGE CYLINDER DRIVE 5D18 BEZEL, AIR LOUVER .......................................................... 90 - 35
(100 PER CENT BEATER SPEED) ................................ 120 - 57 7E25 BLADE, STRAW SPREADER .............................................. 120 - 91
7B21 BEATER GRATE .................................................................. 120 - 9 2D10 BLADE, WINDSHIELD WIPER ............................................ 40 - 53
7D17 BEATER IDLER .................................................................... 120 - 58 7E16 BLADES AND ROTOR, STRAW CHOPPER ...................... 120 - 82
7D17 BEATER IDLER MOUNTINGS.............................................. 120 - 58 7E17 BLADES AND ROTOR, STRAW CHOPPER ...................... 120 - 83
8G5 BEATER SHEAVE ................................................................ 170 - 18 8E8 BLOCK SOLENOID, MAIN VALVE - SIDEHILL .................. 150 - 13
1G9 BELL CRANK AND THROTTLE LINKAGE .......................... 30 - 15 6F19 BLOCK, CABLE, HEADER LEVELING (L.H.)-SH ................ 110 - 112
8G4 BELT AND SHEAVES TORQ-SENSING CTRSHAFT. ........ 170 - 17 1B16 BLOCK, CYLINDER (DH)...................................................... 20 - 4
8D20 BELT GUIDES, SEPARATOR DRIVE .................................. 140 - 22 1B18 BLOCK, CYLINDER (DH)...................................................... 20 - 6
8D20 BELT GUIDES, UNLOADING AUGER DRIVE .................... 140 - 22 1C1 BLOCK, CYLINDER (TH 01) ................................................ 20 - 14
7D10 BELT TACHOMETER DRIVE .............................................. 120 - 50 1C3 BLOCK, CYLINDER (TH 01) ................................................ 20 - 16
3D21 BELT TENSIONING MECHANISM,HYDROSTATIC DR ...... 50 - 61 1C11 BLOCK, CYLINDER (TH 05) ................................................ 20 - 24
7H11 BELT TIGHTENER, DIP AND POUR ELEVATOR .............. 120 - 155 1B20 BLOCK, ENGINE SHORT (DH) ............................................ 20 - 8
5D23 BELT, AIR CONDITIONING COMPRESSOR ...................... 90 - 40 1B24 BLOCK, ENGINE SHORT (DH) ............................................ 20 - 12
2E10 BELT, ALTERNATOR............................................................ 40 - 78 1C5 BLOCK, ENGINE SHORT (TH 01) ...................................... 20 - 18
7B17 BELT, BEATER...................................................................... 120 - 5 1C9 BLOCK, ENGINE SHORT (TH 01) ...................................... 20 - 22
7D9 BELT, BEATER...................................................................... 120 - 49 1C13 BLOCK, ENGINE SHORT (TH 05) ...................................... 20 - 26
7D10 BELT, BEATER...................................................................... 120 - 50 3G22 BLOCK, MOTOR CYLINDER (FOUR-WHEEL DRIVE)........ 50 - 142
8G5 BELT, BEATER...................................................................... 170 - 18 6F20 BLOCK,CABLE,HEADER LEVELING,L.H.-SH...................... 110 - 113
7D16 BELT, BEATER DRIVE (DUAL-RANGE CYLINDER 8E19 BLOCK,CHECK,AUTO.HEADER HEIGHT CONTROL ........ 160 - 1
DRIVE)(100 PER CENT BEATER SPEED) .................... 120 - 57 2C7 BLOWER SWITCH ................................................................ 40 - 24
5E4 BELT, COMPRESSOR .......................................................... 90 - 46 2D7 BLOWER SWITCH ................................................................ 40 - 49
7C10 BELT, CYLINDER DRIVE INTERMEDIATE SHAFT 2D7 BLOWER, CAB ROOF WIRING .......................................... 40 - 49
(DUAL-RANGE CYLINDER DRIVE) ................................ 120 - 24 5D22 BLOWER, PRESSURIZER.................................................... 90 - 39
8G5 BELT, CYLINDER TACHOMETER ...................................... 170 - 18 1D9 BOLTS, HEAD (DH) .............................................................. 20 - 48
8G18 BELT, DRIVE, SECONDARY COUNTERSHAFT ................ 170 - 33 1D11 BOLTS, HEAD (TH) .............................................................. 20 - 50
6E13 BELT, FEEDER HOUSE LOWER SHEAVE-SH .................. 110 - 79 7G14 BOOT, CLEAN GRAIN ELEVATOR HOUSING .................. 120 - 132
6E15 BELT, FEEDER HOUSE LOWER SHEAVES-SH ................ 110 - 81 4B11 BOOT, PARKING BRAKE CONTROL .................................. 60 - 2
1F8 BELT, FLAT ROTARY SCREEN .......................................... 20 - 98 4B12 BOOT, PARKING BRAKE CONTROL .................................. 60 - 3
7G23 BELT, GEAR CASE, LOADING AUGER.............................. 120 - 141 6E3 BOTTOM SHEETS, FEEDER HOUSE - SIDEHILL ............ 110 - 69
4H4 BELT, HYDROSTATIC REEL PUMP.................................... 70 - 91 6E7 BOTTOM, FALSE, FEEDER HOUSE-SH ............................ 110 - 73
7B17 BELT, RASP-BAR CYLINDER .............................................. 120 - 5 2C21 BOX, CONTROL, LOW SHAFT SPEED MONITORING
7E21 BELT, REAR, STRAW CHOPPER ...................................... 120 - 87 (AHHC) .............................................................................. 40 - 38
8F13 BELT, ROTARY SCREEN .................................................... 170 - 1 8E16 BOX, LEVELING CONTROL ................................................ 150 - 23
7E19 BELT, STRAW CHOPPER DRIVE ...................................... 120 - 85 5B23 BOX, TOOL............................................................................ 80 - 15
7E4 BELT, STRAW SPREADER DRIVE .................................... 120 - 69 7G14 BRACE, CLEAN GRAIN ELEVATOR HOUSING ................ 120 - 132
7D9 BELT, TACHOMETER DRIVE .............................................. 120 - 49 6F14 BRACE, FEEDER HOUSE (R.H.)-SH .................................. 110 - 107
7C9 BELT,CYLINDER DRIVE INTERMEDIATE SHAFT.............. 120 - 23 6C14 BRACE, FEEDER HOUSE MIDDLE BELT .......................... 110 - 27
7G17 BELT,DR.,CTRSHAFT.,CLEAN GRAIN ELEVATOR............ 120 - 135 5B19 BRACES, CROSS, SEPARATOR ........................................ 80 - 10
8F18 BELT,DRIVE,HYDRAULIC REEL LIFT ................................ 170 - 6 7C18 BRACES, SUPPORT CYLINDER INTERMEDIATE
6C20 BELT,FDR.HSE.LOWER SHAFT (VARIABLE DR) .............. 110 - 33 DRIVE (DUAL-RANGE CYLINDER DRIVE) .................... 120 - 32
6E14 BELT,FEEDER HOUSE LOWER COUNTERSHAFT-SH .... 110 - 80 7C13 BRACES, SUPPORT, CYLINDER DRIVE ............................ 120 - 27
6E14 BELT,FEEDER HOUSE LOWER SHEAVES-SH ................ 110 - 80 6C12 BRACES,IDLER,MID.,FDR.HSE.,L.H.(VAR.DR.) .................. 110 - 25
3D6 BELT,POSI-TORQ DRIVE WHEEL CLUTCH SHEAVE ...... 50 - 43 6C13 BRACES,IDLER,MID.,FDR.HSE.,L.H.,VAR.DR.-
3D19 BELT,PROPULSION DR.CTRSHAFT SHV,HYDRO.DR ...... 50 - 59 SH ...................................................................................... 110 - 26
3D13 BELT,PROPULSION-DRIVE CTRSHAFT-POSI-TORQ........ 50 - 51 2E12 BRACKET, ALTERNATOR.................................................... 40 - 80
7F7 BELT,SHOE GRAIN SUPPLY AUGERS DR.SHAFT .......... 120 - 99 7G12 BRACKET, CLEAN GRAIN ELEVATOR HOUSING ............ 120 - 130
8G10 BELTS, CLEAN GRAIN ELEVATOR .................................... 170 - 25 6C4 BRACKET, FEEDER CONVEYOR DRIVE (FIXED) ............ 110 - 17
8G9 BELTS, DRIVE, CLEANING FAN ........................................ 170 - 23 6F17 BRACKET, FEEDER CONVEYOR DRIVE-SH .................... 110 - 110
8F24 BELTS, DRIVE, FEEDER HOUSE (LONG) ........................ 170 - 12 6F14 BRACKET, FEEDER HOUSE (R.H.)-SH .............................. 110 - 107
8G3 BELTS, DRIVE, FEEDER HOUSE (REG FIXED 6F1 BRACKET, FEEDER HOUSE LOWER SHAFT-SH ............ 110 - 93
LESS REVERSER) .......................................................... 170 - 16 1G4 BRACKET, FUEL SHUT-OFF (TH) ...................................... 30 - 10
8G1 BELTS, DRIVE, FEEDER HOUSE (REG. FIXED) .............. 170 - 14 2C4 BRACKET, HARNESS, REAR CAB .................................... 40 - 21
8G2 BELTS, DRIVE, FEEDER HOUSE (SIDEHILL).................... 170 - 15 6F19 BRACKET, HEADER LEVELING (L.H.)-SH ........................ 110 - 112
8F17 BELTS, DRIVE, POSI-TORQ GROUND .............................. 170 - 5 6F20 BRACKET, HEADER LEVELING, L.H.-SH .......................... 110 - 113
8D3 BELTS, ENGINE POWERSHAFT ........................................ 140 - 3 8E5 BRACKET, LEVELING CYLINDER PIVOT-SH .................... 150 - 10
8F15 BELTS, ENGINE R.H. SIDE.................................................. 170 - 3 4I7 BRACKET, MOUNTING,PRESSURE CONTR. VALVE........ 70 - 121
8F25 BELTS, FEEDER HOUSE DRIVE (LONG RICE) ................ 170 - 13 2E4 BRACKET, RADIO ................................................................ 40 - 71
8G10 BELTS, LOADING AUGER .................................................. 170 - 25 6E22 BRACKET,F.H.VAR.DR.MIDDLE BELT TGHTNR-SH.......... 110 - 89
8D10 BELTS, PRIMARY COUNTERSHAFT SHEAVES ................ 140 - 11 2C19 BRACKET,FDR.HSE.LOWER SHAFT SPD.SENSOR ........ 40 - 36
6E7 BRACKET,FDR.HSE.SIDE SHEETS-FRAME-SH ................ 110 - 73
10-8 6620 COMBINE PC1666 (18-APR-00)
PN=8
 1A10 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

6F4 BRACKET,FEEDER CONVEYOR IDLER SHAFT-SH.......... 110 - 96 1D2 CAMSHAFT GEAR (DH) ...................................................... 20 - 40
6E5 BRACKET,FEEDER HOUSE BOTTOM SHEETS-SH .......... 110 - 71 1D3 CAMSHAFT GEAR (TH) ...................................................... 20 - 41
6E15 BRACKET,FEEDER HOUSE LOWER SHEAVES-SH.......... 110 - 81 3H17 CAP, CAM LOBE MOTOR.................................................... 50 - 166
6F10 BRACKET,FEEDER HOUSE R.H. SHIELD-SH.................... 110 - 102 1F7 CAP, ENGINE COOLANT HEATER .................................... 20 - 97
6E2 BRACKET,FEEDER HOUSE TOP SHEETS-SH.................. 110 - 67 1G15 CAP, EXHAUST RAIN .......................................................... 30 - 22
7F19 BRACKETS, CHAFFER FRAME .......................................... 120 - 111 1G16 CAP, EXHAUST RAIN .......................................................... 30 - 23
4B11 BRAKE CONTROLS, PARKING .......................................... 60 - 2 4D15 CAP, HYDRAULIC OIL RESERVOIR .................................. 70 - 2
4B12 BRAKE CONTROLS, PARKING .......................................... 60 - 3 3G24 CARRIER, FIRST PLANET (FOUR-WHEEL DR.)................ 50 - 144
4B14 BRAKE LINES ...................................................................... 60 - 5 1H7 CENTER HOUSING, TURBOCHARGER (SCHWITZER) .... 30 - 43
4B16 BRAKE MASTER CYLINDER .............................................. 60 - 7 1H3 CENTER HOUSING, TURBOCHARGER(AIRESEARCH).... 30 - 38
4B13 BRAKE PEDALS AND LINKAGE.......................................... 60 - 4 1H5 CENTER HOUSING, TURBOCHARGER(AIRESEARCH).... 30 - 40
5C21 BRAKE PLATE ...................................................................... 90 - 11 3F15 CENTER SECTION, HYDRO, DRIVE (EATON) .................. 50 - 106
3G23 BRAKE PLATES (FOUR-WHEEL DRIVE)............................ 50 - 143 3F14 CENTER SECTION, HYDROSTATIC DRIVE
4B20 BRAKE SHOES AND DRUM ................................................ 60 - 11 (SUNDSTRAND)................................................................ 50 - 105
4B17 BRAKE SLAVE CYLINDER .................................................. 60 - 8 7F10 CHAFFER .............................................................................. 120 - 102
2C10 BREAKER, CIRCUIT ............................................................ 40 - 27 7F12 CHAFFER .............................................................................. 120 - 104
3E22 BRGS,TRUNNIONS,HYDRO.DR.PUMP SWASHPLATE .... 50 - 88 7F17 CHAFFER FRAME ................................................................ 120 - 109
2D2 BUZZER, WARNING ............................................................ 40 - 43 7F19 CHAFFER FRAME BRACKETS............................................ 120 - 111
2C7 BUZZER, WATER TEMPERATURE, SENDING UNIT ........ 40 - 24 7F19 CHAFFER FRAME BRACKETS AND SWINGERS.............. 120 - 111
1D22 BYPASS VALVE, OIL COOLER (DH) .................................. 20 - 61 7F17 CHAFFER FRAME COVER .................................................. 120 - 109
1D23 BYPASS VALVE, OIL COOLER (TH 01) ............................ 20 - 62 7F19 CHAFFER FRAME SWINGERS............................................ 120 - 111
1E4 BYPASS VALVE, OIL COOLER (TH 01) ............................ 20 - 67 7H5 CHAIN TIGHTENERS,DIP AND POUR ELEV.LOWER ...... 120 - 149
1E7 BYPASS VALVE, OIL COOLER (TH 05) ............................ 20 - 71 7H7 CHAIN TIGHTENERS,DIP AND POUR UPPER ELEV........ 120 - 151
7C7 CHAIN, CONCAVE ADJUSTING CONTROLS .................... 120 - 21
7G16 CHAIN, CONVEYOR, CLEAN GRAIN ELEVATOR ............ 120 - 134
C 6F6 CHAIN, CONVEYOR, FEEDER-SH ...................................... 110 - 98
7F22 CHAIN, CRANK SHOE.......................................................... 120 - 115
5D11 CAB ........................................................................................ 90 - 27 6C4 CHAIN, DRIVE, FEEDER CONVEYOR (FIXED) ................ 110 - 17
5D20 CAB AIR FILTER .................................................................. 90 - 37 6F17 CHAIN, DRIVE, FEEDER CONVEYOR-SH.......................... 110 - 110
5D14 CAB COVERS ...................................................................... 90 - 31 6C2 CHAIN, FEEDER CONVEYOR ............................................ 110 - 15
5D14 CAB DOORS ........................................................................ 90 - 31 6D14 CHAIN, FEEDER HOUSE LESS REVERSER UPPER
5D14 CAB HANDLE ........................................................................ 90 - 31 SPROCKETS .................................................................... 110 - 52
5D15 CAB ROOF AND SUPPORTS .............................................. 90 - 32 6F1 CHAIN, FEEDER HOUSE LOWER SHAFT-SH .................. 110 - 93
5D17 CAB ROOF HEADLINER ...................................................... 90 - 34 6E13 CHAIN, FEEDER HOUSE LOWER SPROCKET-SH .......... 110 - 79
2D7 CAB ROOF WIRING BLOWER ............................................ 40 - 49 6F8 CHAIN, FEEDER HOUSE UPPER SHAFT-SH .................... 110 - 100
2D7 CAB ROOF WIRING HARNESS .......................................... 40 - 49 6D3 CHAIN, FEEDER HOUSE UPPER SPROCKETS................ 110 - 40
5D1 CAB SEAL ............................................................................ 90 - 17 6D12 CHAIN, FEEDER HOUSE UPPER SPROCKETS (WIT
5D14 CAB SHIELDS ...................................................................... 90 - 31 H REVERSER) .................................................................. 110 - 50
5D12 CAB WINDOWS .................................................................... 90 - 29 7E5 CHAIN, STRAW WALKER .................................................... 120 - 71
2C4 CAB, REAR, HARNESS BRACKET .................................... 40 - 21 7I3 CHAIN, TAILINGS ELEVATOR CONVEYOR ...................... 120 - 172
3D24 CABLE AND LEVER, HYDRO. DRIVE CONTROL.............. 50 - 65 7I4 CHAIN, TAILINGS ELEVATOR CONVEYOR ...................... 120 - 173
6C18 CABLE AND LINKAGE, REVERSER CONTROL ................ 110 - 31 7H9 CHAIN,CONVEYOR,DIP AND POUR ELEVATOR .............. 120 - 153
3E3 CABLE MOUNTING, HYDRO. DR. CONTROL 8G9 CHAINS, DRIVE, STRAW WALKER .................................... 170 - 23
(SUNDSTRAND AND EATON) ........................................ 50 - 68 8F20 CHAINS, FEEDER HOUSE (LONG) .................................... 170 - 8
3E2 CABLE MOUNTING, HYDRO. DRIVE CONTROL .............. 50 - 67 6F14 CHAINS, FEEDER HOUSE (R.H.)-SH ................................ 110 - 107
1G9 CABLE SUPPORTS AND THROTTLE LINKAGE ................ 30 - 15 8F22 CHAINS, FEEDER HOUSE (SIDEHILL) .............................. 170 - 10
1G2 CABLE, FUEL SHUT-OFF CONTROL ................................ 30 - 8 8F21 CHAINS, FEEDER HOUSE (VARIABLE DRIVE) ................ 170 - 9
1G3 CABLE, FUEL SHUT-OFF CONTROL ................................ 30 - 9 8F23 CHAINS, FEEDER HOUSE-SH ............................................ 170 - 11
4F15 CABLE, VARIABLE CYLINDER CONTROL ........................ 70 - 51 5C19 CHANNEL SUPPORTS ........................................................ 90 - 9
2E21 CABLE, WIRING.................................................................... 40 - 90 8C4 CHANNELS, GRAIN TANK .................................................. 130 - 19
3B21 CABLES AND MOUNTINGS, GEARSHIFT.......................... 50 - 7 3F17 CHARGE PRESSURE RELIEF VALVE BLOCK
2C7 CABLES, BATTERY .............................................................. 40 - 24 (EATON) ............................................................................ 50 - 109
6F19 CABLES, HEADER LEVELING (L.H.)-SH ............................ 110 - 112 3E11 CHARGE PUMP MOUNTING, HYDROSTATIC DRIVE ...... 50 - 77
6F18 CABLES, HEADER LEVELING - SIDEHILL ........................ 110 - 111 3E12 CHARGE PUMP MOUNTING, HYDROSTATIC DRIVE
6F20 CABLES, HEADER LEVELING, L.H.-SH.............................. 110 - 113 (EATON) ............................................................................ 50 - 78
3H10 CAM LOBE MOTOR AND SEALS........................................ 50 - 158 3E9 CHARGE PUMP, HYDROSTATIC DRIVE............................ 50 - 75
3H17 CAM LOBE MOTOR BEARING ............................................ 50 - 166 8E19 CHECK BLOCK, AUTO.HEADER HEIGHT CONTROL ...... 160 - 1
3H10 CAM LOBE MOTOR BEARINGS.......................................... 50 - 158 1H14 CHECK VALVE, FUEL (TH).................................................. 30 - 50
3H21 CAM LOBE MOTOR DESTROKE PUMP ............................ 50 - 171 3H15 CHECK VALVES, CAM LOBE MOTOR .............................. 50 - 164
3H10 CAM LOBE MOTOR OUTER COVER ................................ 50 - 158 7E7 CHOPPER HOUSING, STRAW ............................................ 120 - 73
3H17 CAM LOBE MOTOR QUILL .................................................. 50 - 166 7E8 CHOPPER HOUSING, STRAW ............................................ 120 - 74
3H10 CAM LOBE MOTOR SHAFT ................................................ 50 - 158 7E20 CHOPPER, STRAW, KNIFE AND SUPPORT .................... 120 - 86
3H19 CAM LOBE MOTOR YOKE, PIVOTS AND CAPS .............. 50 - 168 7E11 CHOPPER, STRAW, PLATE AND FINS.............................. 120 - 77
3B16 CAM, GEARSHIFT LEVER (POSI-TORQ) .......................... 50 - 2 7E12 CHOPPER, STRAW, PLATE AND FINS.............................. 120 - 78
3C6 CAM, SHIFTER...................................................................... 50 - 17 8F8 CIRCUIT BOX, DIAL-A-MATIC CONVERSION .................... 160 - 18
1D2 CAMSHAFT (DH) .................................................................. 20 - 40 2C23 CIRCUIT BOX, DIAL-A-MATIC HEADER
1D3 CAMSHAFT (TH) .................................................................. 20 - 41 HEIGHT CONTROL .......................................................... 40 - 40
6620 COMBINE PC1666 (18-APR-00) 10-9
PN=9
 1A11 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

2C1 CIRCUIT BOX, HARVESTRAK ............................................ 40 - 18 1H22 CONNECTORS, FUEL INJECTION PUMP HOUSING
2C10 CIRCUIT BREAKER AND RELAY PANEL .......................... 40 - 27 (TH).................................................................................... 30 - 60
2D5 CIRCUIT BREAKER, ELECTRIC CLUTCH .......................... 40 - 47 2F5 CONNECTORS, SUPPLEMENTARY TERMINALS.............. 40 - 96
2D5 CIRCUIT BREAKER, HARVESTRAK.................................... 40 - 47 8G24 CONSOLE COVER DECALS................................................ 170 - 39
6F1 CLAMP, FEEDER HOUSE LOWER SHAFT-SH.................. 110 - 93 5D9 CONSOLE COVERS ............................................................ 90 - 25
2C4 CLAMPS, HARNESS, REAR CAB........................................ 40 - 21 5D9 CONSOLE PANEL ................................................................ 90 - 25
8G10 CLEAN GRAIN ELEVATOR DRIVE...................................... 170 - 25 5C25 CONSOLE, SEAT, FRAME, AND SEALS ............................ 90 - 15
7G17 CLEAN GRAIN ELEVATOR DRIVE COUNTERSHAFT ...... 120 - 135 2C1 CONSOLE,GRAIN LOSS (HARVESTRAK) .......................... 40 - 18
7G19 CLEAN GRAIN ELEVATOR DRIVE TIGHTENER................ 120 - 137 8E16 CONTROL BOX, LEVELING ................................................ 150 - 23
7G11 CLEAN GRAIN ELEVATOR HOUSING ................................ 120 - 129 2C21 CONTROL BOX, LOW SHAFT SPEED MONITORING
7G12 CLEAN GRAIN ELEVATOR HOUSING ................................ 120 - 130 (AHHC) .............................................................................. 40 - 38
7G14 CLEAN GRAIN ELEVATOR HOUSING BOOT .................... 120 - 132 2C23 CONTROL BOX,LOW SHAFT SPD. MONITORING
8G10 CLEAN GRAIN ELEVATOR SHEAVES AND BELTS.......... 170 - 25 (DIAL-A-MATIC) ................................................................ 40 - 40
7G7 CLEAN GRAIN LOWER AUGER AND HOUSING .............. 120 - 125 3D24 CONTROL CABLE AND LEVER, HYDRO. DRIVE.............. 50 - 65
7G9 CLEAN GRAIN LOWER AUGER HOUSING........................ 120 - 127 6C18 CONTROL CABLE AND LINKAGE, REVERSER ................ 110 - 31
7F24 CLEANING FAN .................................................................... 120 - 117 3E2 CONTROL CABLE MOUNTING HYDRO. DRIVE ................ 50 - 67
7G3 CLEANING FAN AIR DUCTS .............................................. 120 - 121 3E3 CONTROL CABLE MOUNTING, HYDRO. DR.
8G9 CLEANING FAN DRIVE BELTS .......................................... 170 - 23 (SUNDSTRAND AND EATON) ........................................ 50 - 68
8G9 CLEANING FAN DRIVE SHEAVES...................................... 170 - 23 3F13 CONTROL HANDLE,HYDRO.DR.DISPLACEMENT
7G2 CLEANING FAN HOUSING .................................................. 120 - 119 (SUNDSTRAND)................................................................ 50 - 104
2C6 CLEANING FAN MAGNETIC SENSOR................................ 40 - 23 1G7 CONTROL HOUSING, THROTTLE LINKAGE .................... 30 - 13
7G5 CLEANING FAN SPEED CONTROL.................................... 120 - 123 4G25 CONTROL LEVER, HYDRAULIC REEL LIFT...................... 70 - 87
2C1 CLEANING SHOE SENSOR ................................................ 40 - 18 4G25 CONTROL LEVER, PLATFORM LIFT.................................. 70 - 87
6E24 CLEVIS,F.H.VAR.DRIVE SHEAVE CONTROL-SH .............. 110 - 91 1G7 CONTROL LEVER, THROTTLE LINKAGE .......................... 30 - 13
6E20 CLEVIS,FDR.HSE.LOWER BELT TIGHTENER-SH ............ 110 - 87 8F3 CONTROL LINKAGE ............................................................ 160 - 12
6E5 CLIP, FEEDER HOUSE BOTTOM SHEETS-SH ................ 110 - 71 2C1 CONTROL PANEL, HARVESTRAK COMBINE
6F12 CLIP, FEEDER HOUSE LEFT-HAND SHIELD-SH .............. 110 - 104 MONITOR .......................................................................... 40 - 18
6E2 CLIP, FEEDER HOUSE TOP SHEETS-SH ........................ 110 - 67 4F6 CONTROL PLUG, FLOW ...................................................... 70 - 42
6E7 CLIP,FEEDER HOUSE SIDE SHEETS-FRAME-SH ............ 110 - 73 8F6 CONTROL SWITCH, AUTOMATIC HEADER HEIGHT ...... 160 - 15
6D24 CLOSURE, INNER, FEEDER HOUSE-SH .......................... 110 - 63 3H1 CONTROL VALVE (FOUR-WHEEL DRIVE) ........................ 50 - 146
6D24 CLOSURE, OUTER, FEEDER HOUSE-SH.......................... 110 - 63 3H24 CONTROL VALVE (FOUR-WHEEL DRIVE) ........................ 50 - 174
5C21 CLUTCH COVER .................................................................. 90 - 11 4G2 CONTROL VALVE KIT, SECONDARY ................................ 70 - 63
3D2 CLUTCH MASTER CYLINDER ............................................ 50 - 39 4G4 CONTROL VALVE KIT, SECONDARY ................................ 70 - 65
3D4 CLUTCH OIL LINE ................................................................ 50 - 41 4H2 CONTROL VALVE LINKAGE, REEL SPEED ...................... 70 - 89
3C25 CLUTCH PEDAL AND LINKAGE.......................................... 50 - 37 3H2 CONTROL VALVE SOLENOID (FOUR-WHEEL DR.) ........ 50 - 147
3D6 CLUTCH SHEAVE, DRIVE WHEEL, POSI-TORQ .............. 50 - 43 3H25 CONTROL VALVE SOLENOID (FOUR-WHEEL DR.) ........ 50 - 176
3D3 CLUTCH SLAVE CYLINDER ................................................ 50 - 40 3F11 CONTROL VALVE, HYDRO. DR. DISPLACEMENT
3D10 CLUTCH, DRIVE WHEEL .................................................... 50 - 47 (EATON) ............................................................................ 50 - 102
2B19 CLUTCH, HEADER ELECTROMAGNETIC .......................... 40 - 9 3F6 CONTROL VALVE, HYDRO. DRIVE DISPLACEMENT
2E16 COIL, STARTER (DH) .......................................................... 40 - 84 (SUNDSTRAND)................................................................ 50 - 97
1G5 COLD WEATHER STARTING AID ...................................... 30 - 11 3F7 CONTROL VALVE, HYDRO. DRIVE DISPLACEMENT
4B22 COLUMN AND WHEEL, STEERING .................................... 60 - 13 (SUNDSTRAND)................................................................ 50 - 98
2E15 COMMUTATOR END FRAME, STARTER .......................... 40 - 83 3F9 CONTROL VALVE, HYDRO. DRIVE DISPLACEMENT
5C3 COMPARTMENT MIDDLE DOOR, ENGINE ........................ 80 - 20 (SUNDSTRAND)................................................................ 50 - 100
5E6 COMPRESSOR CLUTCH AND SERVICE VALVE .............. 90 - 49 4H15 CONTROL VALVE, HYDROSTATIC DR. REEL FLOW ...... 70 - 103
5E9 COMPRESSOR HARDWARE KIT ........................................ 90 - 53 4E8 CONTROL VALVE, MAIN HYD. POPPETS-HYDRO........... 70 - 19
5E2 COMPRESSOR HARNESS .................................................. 90 - 44 4E11 CONTROL VALVE, MAIN HYD. POPPETS-HYDRO........... 70 - 22
5E7 COMPRESSOR KIT .............................................................. 90 - 50 4E8 CONTROL VALVE, MAIN HYD. SPRINGS-HYDRO. .......... 70 - 19
5E4 COMPRESSOR MOUNTING AND SUPPORTS .................. 90 - 46 4E11 CONTROL VALVE, MAIN HYD. SPRINGS-HYDRO. .......... 70 - 22
5E5 COMPRESSOR MOUNTING AND SUPPORTS .................. 90 - 47 4E9 CONTROL VALVE, MAIN POPPETS (HYDRO-SH) ............ 70 - 20
5E7 COMPRESSOR PARTS ........................................................ 90 - 50 4E9 CONTROL VALVE, MAIN SPRINGS (HYDRO-SH) ............ 70 - 20
5E2 COMPRESSOR RELAY ........................................................ 90 - 44 4I7 CONTROL VALVE, PRESSURE .......................................... 70 - 121
2C7 COMPRESSOR WIRING HARNESS .................................... 40 - 24 4F18 CONTROL VALVE, SECONDARY........................................ 70 - 55
5D23 COMPRESSOR, AIR CONDITIONING ................................ 90 - 40 4F19 CONTROL VALVE, SECONDARY........................................ 70 - 56
7C7 CONCAVE ADJUSTING CONTROLS .................................. 120 - 21 4F21 CONTROL VALVE, SECONDARY........................................ 70 - 58
7C5 CONCAVE ADJUSTING SHAFT .......................................... 120 - 19 3H4 CONTROL VALVES, FLOW (FOUR-WHEEL DRIVE) ........ 50 - 149
7B21 CONCAVE, OPEN-BAR ........................................................ 120 - 9 3I2 CONTROL VALVES,FLOW (FOUR-WHEEL DRIVE) .......... 50 - 179
7C2 CONCAVE, SPIKE-TOOTH .................................................. 120 - 15 1G2 CONTROL, FUEL SHUT-OFF .............................................. 30 - 8
5E12 CONDENSER, RECEIVER, AIR CONDITIONER 1G3 CONTROL, FUEL SHUT-OFF .............................................. 30 - 9
LINES ................................................................................ 90 - 56 7G5 CONTROL, SPEED, CLEANING FAN.................................. 120 - 123
5E11 CONDENSER,RECEIVER,AIR CONDITIONER LINES........ 90 - 55 4F15 CONTROL, VARIABLE CYLINDER ...................................... 70 - 51
1B14 CONDITIONER, COOLANT .................................................. 20 - 2 7C7 CONTROLS, CONCAVE ADJUSTING ................................ 120 - 21
1C22 CONNECTING RODS (DH) .................................................. 20 - 35 4B11 CONTROLS, PARKING BRAKE .......................................... 60 - 2
1C23 CONNECTING RODS (DH) .................................................. 20 - 36 4B12 CONTROLS, PARKING BRAKE .......................................... 60 - 3
1C21 CONNECTING RODS (TH) .................................................. 20 - 34 3D11 CONTROLS, POSI-TORQ GROUND SPEED...................... 50 - 49
1C24 CONNECTING RODS (TH) .................................................. 20 - 37 7I10 CONTROLS, SEPARATOR DRIVE ...................................... 120 - 181
2F1 CONNECTOR, ELECTRICAL, SERVICE KIT ...................... 40 - 92 4H12 CONVERSION HOSES AND COUPLERS .......................... 70 - 100
10-10 6620 COMBINE PC1666 (18-APR-00)
PN=10
 1A12 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

8F8 CONVERSION, DIAL-A-MATIC HEADER HEIGHT 1D1 CRANKSHAFT OIL SEAL HOUSING .................................. 20 - 39
CONTROL ........................................................................ 160 - 18 1C19 CRANKSHAFT PULLEY........................................................ 20 - 32
7G16 CONVEYOR CHAIN, CLEAN GRAIN ELEVATOR .............. 120 - 134 7E2 CRANKSHAFT, STRAW WALKER FRONT ........................ 120 - 67
6F6 CONVEYOR CHAIN, FEEDER-SH ...................................... 110 - 98 7E4 CRANKSHAFT, STRAW WALKER REAR............................ 120 - 69
1B14 COOLANT CONDITIONER.................................................... 20 - 2 1C18 CRANKSHAFT, UNDERSIZE MAIN BEARING (DH) .......... 20 - 31
1F6 COOLANT HEATER, ENGINE.............................................. 20 - 96 3G12 CRAWLER BEARINGS.......................................................... 50 - 131
1E10 COOLER, ENGINE OIL ........................................................ 20 - 74 3G14 CRAWLER BEARINGS.......................................................... 50 - 133
1F7 CORD, ENGINE COOLANT HEATER.................................. 20 - 97 3G16 CRAWLER DRIVE BEARINGS ............................................ 50 - 135
5E11 CORE, VALVE ...................................................................... 90 - 55 3G16 CRAWLER DRIVE SHIELD .................................................. 50 - 135
5B25 CORNER FRAME .................................................................. 80 - 17 3G16 CRAWLER DRIVE SPROCKET............................................ 50 - 135
8G18 COUNTERSHAFT DRIVE...................................................... 170 - 33 3G11 CRAWLER FRAME, R.H. AND L.H. .................................... 50 - 129
8D16 COUNTERSHAFT DRIVE IDLER, SECONDARY ................ 140 - 17 3G12 CRAWLER IDLER.................................................................. 50 - 131
3D13 COUNTERSHAFT SHEAVE, PROPULSION-DRIVE............ 50 - 51 3G11 CRAWLER ROLLERS .......................................................... 50 - 129
8D10 COUNTERSHAFT SHEAVES, PRIMARY ............................ 140 - 11 3G12 CRAWLER SHAFT ................................................................ 50 - 131
8D11 COUNTERSHAFT SHEAVES, PRIMARY (DUAL- 3G14 CRAWLER SHAFTS .............................................................. 50 - 133
RANGE CYLINDER DRIVE) ............................................ 140 - 12 3G10 CRAWLER SHOES .............................................................. 50 - 128
6E15 COUNTERSHAFT, LOWER, FEEDER HOUSE-SH ............ 110 - 81 3G14 CRAWLER TIGHTENER ...................................................... 50 - 133
8D5 COUNTERSHAFT, PRIMARY AND MOUNTINGS .............. 140 - 5 3G10 CRAWLER TRACKS.............................................................. 50 - 128
3D16 COUNTERSHAFT, PROPULSION-DRIVE............................ 50 - 55 3G10 CRAWLER TRACKS AND SHOES ...................................... 50 - 128
8D14 COUNTERSHAFT, SECONDARY ........................................ 140 - 15 8C11 CROSS AUGER DRIVE TIGHTENERS,GRAIN TANK ........ 130 - 27
3C8 COUNTERSHAFT, TRANSMISSION .................................... 50 - 19 8G16 CROSS AUGER DRIVES...................................................... 170 - 31
8B24 COUNTERSHAFT, UNLOADING AUGER ............................ 130 - 15 8C2 CROSS AUGER, FRONT, GRAIN TANK ............................ 130 - 17
7G17 COUNTERSHAFT,DRIVE,CLEAN GRAIN ELEVATOR........ 120 - 135 8C3 CROSS AUGER, REAR, GRAIN TANK .............................. 130 - 18
7H10 COUNTERSHAFT,DRIVE,DIP AND POUR ELEVATOR...... 120 - 154 5B19 CROSS BRACES, SEPARATOR.......................................... 80 - 10
6E14 COUNTERSHAFT,FEEDER HOUSE LOWER-SH .............. 110 - 80 7D5 CTRSHAFT,CYL.DRIVE BRG.HSG.LUBE BANK-RH .......... 120 - 44
6E16 COUNTERSHAFT,FEEDER HOUSE UPPER-SH ................ 110 - 82 7E15 CURTAIN AND SHIELDS, STRAW CHOPPER .................. 120 - 81
8F18 COUNTERSHAFT,PRIMARY TO HYD.REEL LIFT .............. 170 - 6 7D22 CURTAINS, SEPARATOR .................................................... 120 - 63
3D17 COUNTERSHAFT,PROPULSION DRIVE-POSI-TORQ........ 50 - 56 5D5 CUSHIONS, SEAT (PERSONAL POSTURE) ...................... 90 - 21
7H2 COUNTERSHAFT,UPPER,DIP AND POUR ELEVATOR .... 120 - 145 3E17 CYL. BLOCK, HYDRO. DR. PUMP(SUNDSTRAND) .......... 50 - 83
6C24 COUNTERSHAFT,UPPER,FDR.HSE.-VARIABLE DR. ........ 110 - 37 3E18 CYL. BLOCK, HYDRO. DR. PUMP(SUNDSTRAND) .......... 50 - 84
3E8 COUPLER, HYDROSTATIC DRIVE MOTOR ...................... 50 - 74 3E20 CYL. BLOCK, HYDRO. DRIVE PUMP (EATON) ................ 50 - 86
6B14 COUPLER, QUIK-TATCH (L.H.) .......................................... 110 - 2 7D5 CYL.DR.CTRSHAFT.BRG.HSG.LUBE BANK-RH ................ 120 - 44
6B15 COUPLER, QUIK-TATCH (R.H.) .......................................... 110 - 3 7D4 CYL.SHAFT BRG.HSG.LUBE BANK (R.H.) ........................ 120 - 43
4H10 COUPLERS AND HOSES FOR COMBINES ...................... 70 - 98 7D7 CYL.SHAFT BRG.LUBE BANK SYS.,L.H.(POSI) ................ 120 - 47
2C9 COVER PLATES,ELEC.,ENGINE COMPT.FIREWALL ........ 40 - 26 1B16 CYLINDER BLOCK (DH) ...................................................... 20 - 4
7F17 COVER, CHAFFER FRAME ................................................ 120 - 109 1B18 CYLINDER BLOCK (DH) ...................................................... 20 - 6
5C21 COVER, CLUTCH.................................................................. 90 - 11 1C1 CYLINDER BLOCK (TH 01).................................................. 20 - 14
7C20 COVER, DUAL-RANGE AND CYLINDER GEAR 1C3 CYLINDER BLOCK (TH 01).................................................. 20 - 16
CASE ................................................................................ 120 - 34 1C11 CYLINDER BLOCK (TH 05).................................................. 20 - 24
3G24 COVER, FIRST PLANET (FOUR-WHEEL DR.) .................. 50 - 144 3G22 CYLINDER BLOCK, MOTOR (FOUR-WHEEL DRIVE)........ 50 - 142
3E15 COVER, FRONT, HYDRO. DRIVE PUMP (EATON) .......... 50 - 81 7D20 CYLINDER COVER DEFLECTOR ........................................ 120 - 61
3E14 COVER, FRONT, HYDROSTATIC DRIVE 7D20 CYLINDER COVERS ............................................................ 120 - 61
(SUNDSTRAND)................................................................ 50 - 80 5B10 CYLINDER DOOR SEALS .................................................... 80 - 1
3E13 COVER, FRONT, HYDROSTATIC DRIVE PUMP 7C9 CYLINDER DRIVE INTERMEDIATE SHAFT........................ 120 - 23
(SUNDSTRAND)................................................................ 50 - 79 7C10 CYLINDER DRIVE INTERMEDIATE SHAFT
3H15 COVER, INNER .................................................................... 50 - 164 (DUAL-RANGE CYLINDER DRIVE) ................................ 120 - 24
3H10 COVER, OUTER, CAM LOBE MOTOR................................ 50 - 158 7C13 CYLINDER DRIVE SUPPORT BRACES.............................. 120 - 27
1D13 COVER, ROCKER ARM (DH) .............................................. 20 - 52 7C15 CYLINDER DRIVE TIGHTENER .......................................... 120 - 29
2E19 COVER, STARTER SOLENOID (DH) .................................. 40 - 87 1D9 CYLINDER HEAD (DH) ........................................................ 20 - 48
1D4 COVER, TACHOMETER DRIVE GEAR .............................. 20 - 42 1D11 CYLINDER HEAD (TH) ........................................................ 20 - 50
1C25 COVER, TIMING GEAR ........................................................ 20 - 38 1D9 CYLINDER HEAD GASKET (DH) ........................................ 20 - 48
5D16 COVERS AND INNER ROOF .............................................. 90 - 33 1D11 CYLINDER HEAD GASKET (TH) ........................................ 20 - 50
5D14 COVERS, CAB ...................................................................... 90 - 31 1F1 CYLINDER HEAD GASKET KIT (TH) .................................. 20 - 90
5D9 COVERS, CONSOLE ............................................................ 90 - 25 1E23 CYLINDER HEAD GASKET SET (DH) ................................ 20 - 88
7D20 COVERS, CYLINDER............................................................ 120 - 61 4I4 CYLINDER KIT, HEADER LIFT HYDRAULIC...................... 70 - 118
8C5 COVERS, GRAIN TANK FRONT AND REAR, 4I5 CYLINDER KIT, HEADER LIFT HYDRAULIC-SH................ 70 - 119
ADJUSTABLE.................................................................... 130 - 20 1B14 CYLINDER LINER PACKING LUBRICANT.......................... 20 - 2
8C6 COVERS, GRASS SEED UNLOADING AUGER ................ 130 - 21 1C22 CYLINDER LINERS (DH) ...................................................... 20 - 35
8C4 COVERS,GRAIN TANK INNER UNLOADING AUGER ...... 130 - 19 1C23 CYLINDER LINERS (DH) ...................................................... 20 - 36
1G9 CRANK, BELL........................................................................ 30 - 15 1C21 CYLINDER LINERS (TH) ...................................................... 20 - 34
1G13 CRANKCASE VENT TUBE .................................................. 30 - 20 1C24 CYLINDER LINERS (TH) ...................................................... 20 - 37
1D13 CRANKCASE VENTILATOR TUBE (DH) ............................ 20 - 52 8E5 CYLINDER PIVOT BRACKET, LEVELING-SH .................... 150 - 10
1C19 CRANKSHAFT ...................................................................... 20 - 32 7D3 CYLINDER SHAFT BRG.HSG.LUBE BANK-RH SIDE ........ 120 - 42
7F22 CRANKSHAFT DRIVE TIGHTENER, SHOE ........................ 120 - 115 7D6 CYLINDER SHAFT BRG.LUBE BANK,LH (HYDRO) .......... 120 - 45
1C17 CRANKSHAFT KIT, UNDERSIZE 7D21 CYLINDER SHEAR BAR ...................................................... 120 - 62
CONNECTING ROD JOURNAL (DH) .............................. 20 - 30 7C4 CYLINDER SPEED TACHOMETER .................................... 120 - 17
1D1 CRANKSHAFT OIL SEAL .................................................... 20 - 39 8G5 CYLINDER TACHOMETER AND BEATER.......................... 170 - 18
6620 COMBINE PC1666 (18-APR-00) 10-11
PN=11
 1A13 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

8G5 CYLINDER TACHOMETER BELT ........................................ 170 - 18 7H11 DIP AND POUR ELEVATOR BELT TIGHTENER................ 120 - 155
8G5 CYLINDER TACHOMETER SHEAVE .................................. 170 - 18 7H9 DIP AND POUR ELEVATOR CONVEYOR CHAIN ............ 120 - 153
4B16 CYLINDER, BRAKE MASTER .............................................. 60 - 7 7H10 DIP AND POUR ELEVATOR DRIVE COUNTERSHAFT .... 120 - 154
4B17 CYLINDER, BRAKE SLAVE.................................................. 60 - 8 8G12 DIP AND POUR ELEVATOR DRIVE SHEAVES ................ 170 - 27
3D2 CYLINDER, CLUTCH MASTER ............................................ 50 - 39 8G12 DIP AND POUR ELEVATOR DRIVE SPROCKETS ............ 170 - 27
3D3 CYLINDER, CLUTCH SLAVE .............................................. 50 - 40 7H2 DIP AND POUR ELEVATOR LOWER AUGER .................. 120 - 145
4I3 CYLINDER, HEADER LIFT HYDRAULIC-SH ...................... 70 - 117 7H4 DIP AND POUR ELEVATOR LOWER HOUSING .............. 120 - 147
4I2 CYLINDER, HYDRAULIC, HEADER LIFT ............................ 70 - 116 8G12 DIP AND POUR ELEVATOR TIGHTENERS........................ 170 - 27
7C18 CYLINDER, INTERMEDIATE DRIVE SUPPORT 7H15 DIP AND POUR ELEVATOR TOP HOOD .......................... 120 - 159
BRACES (DUAL-RANGE CYLINDER DRIVE) ................ 120 - 32 7H16 DIP AND POUR ELEVATOR TOP SHIELD ........................ 120 - 160
8D25 CYLINDER, LEVELING (SH) ................................................ 150 - 5 7H7 DIP AND POUR ELEVATOR UPPER CHAIN IDLERS ...... 120 - 151
8D23 CYLINDER, LEVELING-SH .................................................. 150 - 3 7H2 DIP AND POUR ELEVATOR UPPER COUNTERSHAFT .. 120 - 145
8D11 CYLINDER, PRIMARY COUNTERSHAFT SHEAVES 1D5 DIPSTICK TUBE (DH) .......................................................... 20 - 44
(DUAL-RANGE CYLINDER DRIVE) ................................ 140 - 12 1D7 DIPSTICK TUBE (TH) .......................................................... 20 - 46
7B17 CYLINDER, RASP-BAR ........................................................ 120 - 5 1D5 DIPSTICK, ENGINE OIL (DH) .............................................. 20 - 44
7B18 CYLINDER, RASP-BAR (DUAL-RANGE CYLINDER 1D7 DIPSTICK, ENGINE OIL (TH) .............................................. 20 - 46
DRIVE) .............................................................................. 120 - 6 8F13 DISK, ROTARY SCREEN .................................................... 170 - 1
7B23 CYLINDER, SPIKE-TOOTH .................................................. 120 - 11 3F11 DISPLACEMENT CONTROL VALVE, HYDRO. DR.
7B24 CYLINDER, SPIKE-TOOTH (DUAL-RANGE (EATON) ............................................................................ 50 - 102
CYLINDER DRIVE) .......................................................... 120 - 13 3F7 DISPLACEMENT CONTROL VALVE, HYDRO. DRIVE
4H24 CYLINDER,HYD.,VARIABLE DRIVE FDR.HSE-SH ............ 70 - 112 (SUNDSTRAND)................................................................ 50 - 98
4G10 CYLINDER,HYDRAULIC,UNLOADING AUGER SWING .... 70 - 71 3F9 DISPLACEMENT CONTROL VALVE, HYDRO. DRIVE
4C14 CYLINDER,STEERING (FOUR-WHEEL DRIVE).................. 60 - 30 (SUNDSTRAND)................................................................ 50 - 100
4C12 CYLINDER,STEERING-ADJUSTABLE REAR AXLE............ 60 - 28 3F6 DISPLACEMENT CONTROL VALVE, HYDRO. DRIVE
4C12 CYLINDER,STEERING-FIXED REAR AXLE ........................ 60 - 28 (SUNSTRAND) .................................................................. 50 - 97
4C14 CYLINDER,STEERING-HVY.DUTY REAR AXLE 1F11 DISPLACER, ROTARY SCREEN DRIVE BELT .................. 20 - 101
(FOUR-WHEEL DRIVE) .................................................... 60 - 30 8E10 DIVIDER MOUNTING, FLOW - SIDEHILL .......................... 150 - 16
4G11 CYLINDER,UNLOADING AUGER SWING HYDRAULIC .... 70 - 72 8E11 DIVIDER MOUNTING, FLOW - SIDEHILL .......................... 150 - 17
4G13 CYLINDER,UNLOADING AUGER SWING HYDRAULIC .... 70 - 74 8E10 DIVIDER VALVE, FLOW - SIDEHILL .................................. 150 - 16
4G15 CYLINDER,UNLOADING AUGER SWING HYDRAULIC .... 70 - 76 8E11 DIVIDER VALVE, FLOW - SIDEHILL .................................. 150 - 17
2D8 DOME LIGHT ........................................................................ 40 - 51
7G11 DOOR, CLEAN GRAIN ELEVATOR .................................... 120 - 129
D 7G14 DOOR, CLEAN GRAIN ELEVATOR HOUSING .................. 120 - 132
7G9 DOOR, CLEAN GRAIN LOWER AUGER ............................ 120 - 127
8G25 DECAL, PANEL .................................................................... 170 - 40 5C2 DOOR, ENGINE COMPARTMENT ...................................... 80 - 19
8G24 DECALS, CONSOLE COVER .............................................. 170 - 39 5C3 DOOR, ENGINE COMPARTMENT MIDDLE ........................ 80 - 20
8G22 DECALS, FRONT AND REAR.............................................. 170 - 37 6E2 DOOR, FRONT, FEEDER HOUSE TOP SHEETS-SH ........ 110 - 67
8G24 DECALS, INSTRUMENT PANEL.......................................... 170 - 39 8B12 DOOR, GRAIN TANK............................................................ 130 - 3
8G19 DECALS, RIGHT-HAND AND LEFT-HAND.......................... 170 - 34 8B14 DOOR, GRAIN TANK............................................................ 130 - 5
8H1 DECALS, SEPARATOR ........................................................ 170 - 41 8B20 DOOR, GRAIN TANK............................................................ 130 - 11
8D18 DECLUTCHING IDLER.......................................................... 140 - 19 5C21 DOOR, INSPECTION, OPERATOR’S PLATFORM.............. 90 - 11
7D20 DEFLECTOR, CYLINDER COVER ...................................... 120 - 61 5D9 DOOR, PANEL ...................................................................... 90 - 25
6D24 DEFLECTOR, FEEDER HOUSE-SH .................................... 110 - 63 5C8 DOOR, ROTARY SCREEN .................................................. 80 - 25
3H21 DESTROKE PUMP, CAM LOBE MOTOR............................ 50 - 171 7B15 DOOR, STONE TRAP .......................................................... 120 - 3
8F7 DIAL-A-MATIC HDR.HGT.CONTROL SWITCH.................... 160 - 17 7B21 DOOR, STONE TRAP .......................................................... 120 - 9
8F5 DIAL-A-MATIC HDR.HGT.CONTROL,AMPLIFIER .............. 160 - 14 5C23 DOOR, TAILINGS ELEVATOR ............................................ 90 - 13
2C23 DIAL-A-MATIC HEADER HEIGHT CONTROL .................... 40 - 40 7H25 DOOR, TAILINGS ELEVATOR ............................................ 120 - 169
8F3 DIAL-A-MATIC HEADER HEIGHT CONTROL .................... 160 - 12 7I1 DOOR, TAILINGS ELEVATOR ............................................ 120 - 170
8F8 DIAL-A-MATIC HEADER HEIGHT CONTROL 6E2 DOOR,CENTER,FEEDER HOUSE TOP SHEETS-SH ........ 110 - 67
CONVERSION .................................................................. 160 - 18 6E2 DOOR,REAR,FEEDER HOUSE TOP SHEETS-SH ............ 110 - 67
2C23 DIAL-A-MATIC HEADER HEIGHT CONTROL, 5D14 DOORS, CAB ........................................................................ 90 - 31
CIRCUIT BOX .................................................................. 40 - 40 5B10 DOORS, CYLINDER, SEPARATOR .................................... 80 - 1
3C6 DIFFERENTIAL GASKET ...................................................... 50 - 17 6D25 DOORS, FEEDER HOUSE - SIDEHILL .............................. 110 - 65
3C11 DIFFERENTIAL GEARS AND SHAFTS .............................. 50 - 22 8G18 DR.,PRIMARY CTRSHFT TO SECONDARY CTRSHFT .... 170 - 33
3C13 DIFFERENTIAL GEARS AND SHAFTS .............................. 50 - 24 5E15 DRAIN TUBES, EVAPORATOR .......................................... 90 - 59
3C5 DIFFERENTIAL HOUSING.................................................... 50 - 16 1F17 DRIVE BELT TIGHTENER,RADIATOR FAN........................ 20 - 107
3C6 DIFFERENTIAL HOUSING COVER .................................... 50 - 17 1F13 DRIVE BELT TIGHTENER,ROTARY SCREEN.................... 20 - 103
3C5 DIFFERENTIAL SHIFTER FORKS ...................................... 50 - 16 8F18 DRIVE BELT,HYDRAULIC REEL LIFT ................................ 170 - 6
2E6 DIODE RING, ALTERNATOR, 72 AMP................................ 40 - 74 6C5 DRIVE CHAIN GUIDES, FEEDER CONVEYOR.................. 110 - 18
2E8 DIODE TRIO ASSEMBLY,ALTERNATOR,90 AMP.............. 40 - 76 6C4 DRIVE CHAIN, FEEDER CONVEYOR (FIXED) .................. 110 - 17
7H9 DIP AND POUR ELEV.CONV. UPPER SPROCKETS ........ 120 - 153 6F17 DRIVE CHAIN, FEEDER CONVEYOR-SH .......................... 110 - 110
7H12 DIP AND POUR ELEV.GR.TANK LOADING AUGER ........ 120 - 156 7G17 DRIVE COUNTERSHAFT,CLEAN GRAIN ELEVATOR ...... 120 - 135
7H5 DIP AND POUR ELEV.LOWER CHAIN TIGHTENERS ...... 120 - 149 8D19 DRIVE IDLER, FEEDER HOUSE ........................................ 140 - 21
7H7 DIP AND POUR ELEV.UPPER CHAIN TIGHTENERS........ 120 - 151 8D16 DRIVE IDLER, SECONDARY COUNTERSHAFT ................ 140 - 17
7H13 DIP AND POUR ELEVATOR AUGER EXTENSION............ 120 - 157 3E8 DRIVE MOTOR COUPLER, HYDROSTATIC ...................... 50 - 74
7H13 DIP AND POUR ELEVATOR AUGER HOUSING................ 120 - 157 3E8 DRIVE MOTOR MOUNTING, HYDROSTATIC .................... 50 - 74
7H13 DIP AND POUR ELEVATOR AUGER SHIELD.................... 120 - 157 4H7 DRIVE REEL HYDRAULIC HOSES .................................... 70 - 94
10-12 6620 COMBINE PC1666 (18-APR-00)
PN=12
 1A14 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

6D19 DRIVE SHAFT, HEADER - SIDEHILL.................................. 110 - 57 1F7 ENGINE COOLANT HEATER .............................................. 20 - 97
6D20 DRIVE SHAFT, HEADER-SIDEHILL .................................... 110 - 59 1B13 ENGINE OIL .......................................................................... 20 - 1
7F7 DRIVE SHAFT, SHOE GRAIN SUPPLY AUGERS.............. 120 - 99 1E10 ENGINE OIL COOLER .......................................................... 20 - 74
8F18 DRIVE SHEAVES,HYDRAULIC REEL LIFT ........................ 170 - 6 1D5 ENGINE OIL DIPSTICK (DH) .............................................. 20 - 44
7F9 DRIVE TGHTNR.,SHOE GR.SUPPLY AUGERS ................ 120 - 101 1D7 ENGINE OIL DIPSTICK (TH)................................................ 20 - 46
7G19 DRIVE TIGHTENER, CLEAN GRAIN ELEVATOR .............. 120 - 137 1E8 ENGINE OIL FILTER (DH).................................................... 20 - 72
7C15 DRIVE TIGHTENER, CYLINDER.......................................... 120 - 29 1F18 ENGINE OIL PRESSURE GAUGE LINE ............................ 20 - 108
8C11 DRIVE TIGHTENERS,CROSS AUGER,GRAIN TANK ........ 130 - 27 1D17 ENGINE OIL PUMP (DH)...................................................... 20 - 56
3B22 DRIVE WHEEL AND SPACERS .......................................... 50 - 8 1D19 ENGINE OIL PUMP (DH)...................................................... 20 - 58
3B23 DRIVE WHEEL AXLE............................................................ 50 - 9 1D23 ENGINE OIL PUMP (TH 01) ................................................ 20 - 62
3B24 DRIVE WHEEL AXLE (SH) .................................................. 50 - 10 1E1 ENGINE OIL PUMP (TH 01) ................................................ 20 - 64
3D10 DRIVE WHEEL CLUTCH ...................................................... 50 - 47 1E5 ENGINE OIL PUMP (TH 05) ................................................ 20 - 68
3D8 DRIVE WHEEL CLUTCH HOUSING .................................... 50 - 45 1C15 ENGINE OVERHAUL KIT...................................................... 20 - 28
3D8 DRIVE WHEEL CLUTCH THROW-OUT CONTROLS ........ 50 - 45 8D3 ENGINE POWERSHAFT ...................................................... 140 - 3
3D10 DRIVE WHEEL SHAFT ........................................................ 50 - 47 8F15 ENGINE R.H. SIDE BELT TIGHTENERS ............................ 170 - 3
7D15 DRIVE, BEATER.................................................................... 120 - 56 8F15 ENGINE R.H. SIDE BELTS .................................................. 170 - 3
7D17 DRIVE, BEATER.................................................................... 120 - 58 8F15 ENGINE R.H. SIDE SHEAVES ............................................ 170 - 3
7D18 DRIVE, BEATER (DUAL-RANGE CYLINDER 1F4 ENGINE RAIL EXTENSION .................................................. 20 - 94
DRIVE) .............................................................................. 120 - 59 1F1 ENGINE REBUILD GASKET KIT (TH) ................................ 20 - 90
7D16 DRIVE, BEATER, DUAL-RANGE CYLINDER DRIVE 1E23 ENGINE REBUILD GASKET SET (DH) .............................. 20 - 88
(100 PER CENT BEATER SPEED) ................................ 120 - 57 1B20 ENGINE SHORT BLOCK (DH) ............................................ 20 - 8
8G10 DRIVE, CLEAN GRAIN ELEVATOR .................................... 170 - 25 1B24 ENGINE SHORT BLOCK (DH) ............................................ 20 - 12
6D8 DRIVE, FIXED ...................................................................... 110 - 45 1C5 ENGINE SHORT BLOCK (TH 01) ........................................ 20 - 18
8G10 DRIVE, LOADING AUGER.................................................... 170 - 25 1C9 ENGINE SHORT BLOCK (TH 01) ........................................ 20 - 22
7C17 DRIVE, SLOW SPEED CYLINDER ...................................... 120 - 31 1C13 ENGINE SHORT BLOCK (TH 05) ........................................ 20 - 26
8G16 DRIVES, CROSS AUGER .................................................... 170 - 31 1B15 ENGINE SHORT BLOCK SERIAL NUMBER PLATE .......... 20 - 3
8G7 DRIVES, STRAW CHOPPER .............................................. 170 - 21 1F4 ENGINE SUPPORTS ............................................................ 20 - 94
8G7 DRIVES, STRAW SPREADER ............................................ 170 - 21 1D15 ENGINE TEMPERATURE SENDER (DH)............................ 20 - 54
8G14 DRIVES, TAILINGS ELEVATOR AND AUGER.................... 170 - 29 1D15 ENGINE TEMPERATURE SWITCH (DH) ............................ 20 - 54
8G16 DRIVES, UNLOADING AUGER ............................................ 170 - 31 8G17 ENGINE TO PRIMARY CTRSHAFT.DRIVE BELTS ............ 170 - 32
8G16 DRIVES, VERTICAL UNLOADING AUGER ........................ 170 - 31 1B14 ENGINE VALVE STEM LUBRICANT.................................... 20 - 2
8E24 DROP RATE VALVE,AUTO.HDR.HGT.CONTROL .............. 160 - 7 2D2 ETHER START SWITCH ...................................................... 40 - 43
4B20 DRUM, BRAKE SHOES ........................................................ 60 - 11 5E15 EVAPORATOR ...................................................................... 90 - 59
6C1 DRUM, FEEDER CONVEYOR.............................................. 110 - 14 5E15 EVAPORATOR DRAIN TUBES ............................................ 90 - 59
6F4 DRUM, FEEDER-SH.............................................................. 110 - 96 1E22 EXHAUST MANIFOLD (TH) .................................................. 20 - 87
7D18 DUAL-RANGE CYLINDER DRIVE (BEATER DRIVE) ........ 120 - 59 1E21 EXHAUST MANIFOLD GASKETS (DH) .............................. 20 - 86
7C24 DUAL-RANGE CYLINDER DRIVE GEAR CASE 1E22 EXHAUST MANIFOLD GASKETS (TH)................................ 20 - 87
SHIELD .............................................................................. 120 - 39 1E21 EXHAUST MANIFOLDS (DH) .............................................. 20 - 86
7C23 DUAL-RANGE CYLINDER DRIVE LOCKOUT ARM............ 120 - 37 1G15 EXHAUST PIPE .................................................................... 30 - 22
7C22 DUAL-RANGE CYLINDER DRIVE PINION GEARS ............ 120 - 36 1G16 EXHAUST PIPE .................................................................... 30 - 23
7D1 DUAL-RANGE CYLINDER DRIVE TIGHTENER.................. 120 - 40 1D9 EXHAUST VALVES (DH) ...................................................... 20 - 48
7D16 DUAL-RANGE CYLINDER DRIVE, BEATER DRIVE 1D11 EXHAUST VALVES (TH) ...................................................... 20 - 50
(100 PER CENT BEATER SPEED) ................................ 120 - 57 5E15 EXPANSION VALVE, AIR CONDITIONER .......................... 90 - 59
7C20 DUAL-RANGE CYLINDER GEAR CASE ............................ 120 - 34 7H13 EXTENSION, DIP AND POUR ELEVATOR ........................ 120 - 157
7G3 DUCTS, AIR, CLEANING FAN ............................................ 120 - 121 1F4 EXTENSION, ENGINE RAIL ................................................ 20 - 94
8B20 EXTENSIONS, GRAIN TANK .............................................. 130 - 11
6F1 EYEBOLT, FEEDER HOUSE LOWER SHAFT-SH.............. 110 - 93
E 6E2 EYEBOLT, FEEDER HOUSE TOP SHEETS-SH ................ 110 - 67
6F4 EYEBOLT,FEEDER CONVEYOR IDLER SHAFT-SH .......... 110 - 96
2D5 ELECTRIC CLUTCH CIRCUIT BREAKER .......................... 40 - 47 7C18 EYEBOLTS, CYLINDER INTERMEDIATE DRIVE
2D2 ELECTRIC CLUTCH SWITCH .............................................. 40 - 43 SUPPORT (DUAL-RANGE CYLINDER DRIVE) .............. 120 - 32
8F3 ELECTRIC HARNESS .......................................................... 160 - 12
2F1 ELECTRICAL CONNECTOR SERVICE KIT ........................ 40 - 92
2B19 ELECTROMAGNETIC CLUTCH, HEADER .......................... 40 - 9 F
1G12 ELEMENT, AIR CLEANER.................................................... 30 - 19
7G12 ELEVATOR, CLEAN GRAIN HOUSING .............................. 120 - 130 6B24 FALSE BOTTOM,FEEDER HOUSE,LONG .......................... 110 - 12
7G11 ELEVATOR, HOUSING, CLEAN GRAIN.............................. 120 - 129 6B22 FALSE BOTTOM,FEEDER HOUSE,REGULAR .................. 110 - 10
7H25 ELEVATOR, HOUSING, TAILINGS ...................................... 120 - 169 7G2 FAN PROTECTOR SHIELD .................................................. 120 - 119
2E15 END FRAME, STARTER COMMUTATOR .......................... 40 - 83 1E17 FAN PULLEY (DH) ................................................................ 20 - 81
5C3 ENGINE COMPARTMENT MIDDLE DOOR ........................ 80 - 20 5B25 FAN SHROUD ...................................................................... 80 - 17
5C5 ENGINE COMPARTMENT PANEL, FRONT ........................ 80 - 22 2E6 FAN, ALTERNATOR, 72 AMP .............................................. 40 - 74
5B25 ENGINE COMPARTMENT REAR SHEET .......................... 80 - 17 2E8 FAN, ALTERNATOR, 90 AMP .............................................. 40 - 76
5C2 ENGINE COMPARTMENT UPPER DOOR .......................... 80 - 19 7F24 FAN, CLEANING .................................................................. 120 - 117
5C6 ENGINE COMPARTMENT WALKWAY ................................ 80 - 23 7G5 FAN, CLEANING, SPEED CONTROL.................................. 120 - 123
2C7 ENGINE COMPARTMENT WIRING HARNESS .................. 40 - 24 7G2 FAN, HOUSING, CLEANING ................................................ 120 - 119
2C9 ENGINE COMPT.FIREWALL ELEC.COVER PLATES ........ 40 - 26 1F16 FAN, RADIATOR .................................................................. 20 - 106
1F6 ENGINE COOLANT HEATER .............................................. 20 - 96
6620 COMBINE PC1666 (18-APR-00) 10-13
PN=13
 1A15 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

6C13 FDR.HSE.,MID.BELT IDLER BRACES,L.H.,VAR. 8F19 FEEDER HOUSE DRIVE SHEAVES (VAR.DR.) ................ 170 - 7
DR.-SH .............................................................................. 110 - 26 8F25 FEEDER HOUSE DRIVE TIGHTENERS-LONG RICE ........ 170 - 13
6D16 FDR.HSE.DRIVE TGHTNR.-FIXED DR.-REG. .................... 110 - 54 5B10 FEEDER HOUSE FEED PLATE .......................................... 80 - 1
6D17 FDR.HSE.DRIVE TGHTNR-FIXED DR.(LONG) .................. 110 - 55 6E10 FEEDER HOUSE FRAME - SIDEHILL ................................ 110 - 76
6C21 FDR.HSE.GEARBOX MOUNTING ASSEMBLY-SH ............ 110 - 34 6B24 FEEDER HOUSE FRAME, LONG ........................................ 110 - 12
6D18 FDR.HSE.LOWER BELT TGHTNR-FIXED DR.-LONG ........ 110 - 56 6B22 FEEDER HOUSE FRAME, REGULAR ................................ 110 - 10
6D18 FDR.HSE.LOWER BELT TGHTNR-FIXED DR.-REG. ........ 110 - 56 6B17 FEEDER HOUSE FRONT SHEETS .................................... 110 - 5
6F2 FDR.HSE.LOWER CENTER SHAFT-SIDEHILL .................. 110 - 94 6D22 FEEDER HOUSE FRONT SHEETS - SIDEHILL ................ 110 - 61
6D5 FDR.HSE.LOWER SHAFT-FIXED DR.(REG-LONG) .......... 110 - 42 6D24 FEEDER HOUSE FRONT SHEETS-SH .............................. 110 - 63
6C20 FDR.HSE.LOWER SHEAVE MOUNTINGS-VAR.DR. .......... 110 - 33 4H19 FEEDER HOUSE HYDRAULIC HOSE ................................ 70 - 107
6D5 FDR.HSE.LOWER SHEAVE-FIXED DR.(REG-LONG) ........ 110 - 42 8F24 FEEDER HOUSE IDLER (LONG) ........................................ 170 - 12
6C13 FDR.HSE.MID.BELT IDLER,L.H.,VAR.DR.-SH .................... 110 - 26 8G3 FEEDER HOUSE IDLERS (REG FIXED LESS
6C12 FDR.HSE.MID.IDLER BRACES,L.H.(VAR.DR.).................... 110 - 25 REVERSER) ...................................................................... 170 - 16
6C12 FDR.HSE.MIDDLE BELT IDLER,L.H.(VAR.DR.) .................. 110 - 25 8G1 FEEDER HOUSE IDLERS (REG. FIXED)............................ 170 - 14
6E23 FDR.HSE.SHEAVE CONTROL LINKAGE-SH...................... 110 - 90 8G2 FEEDER HOUSE IDLERS (SIDEHILL) ................................ 170 - 15
6E23 FDR.HSE.SHEAVE CONTROL SUPPORT-SH .................... 110 - 90 8F19 FEEDER HOUSE IDLERS (VARIABLE DRIVE) .................. 170 - 7
6C24 FDR.HSE.UPPER COUNTERSHAFT SUPTS-VAR.DR. ...... 110 - 37 6C11 FEEDER HOUSE L.H. FRONT SHIELDS-SH...................... 110 - 24
6C24 FDR.HSE.UPPER COUNTERSHAFT-VARIABLE DR. ........ 110 - 37 6C11 FEEDER HOUSE L.H. REAR SHIELDS-SH ........................ 110 - 24
6E21 FDR.HSE.VAR.DR.MIDDLE BELT TGHTENER-SH ............ 110 - 88 6F12 FEEDER HOUSE LEFT-HAND SHIELD-SH ........................ 110 - 104
6E22 FDR.HSE.VAR.DR.MIDDLE BELT TGHTNR-SH.................. 110 - 89 6D14 FEEDER HOUSE LESS REVERSER UPPER
4H24 FDR.HSE.VARIABLE DRIVE HYD.CYLINDER - SH............ 70 - 112 SPROCKET ...................................................................... 110 - 52
4H18 FDR.HSE.VARIABLE DRIVE HYDRAULIC HOSE .............. 70 - 106 6D14 FEEDER HOUSE LESS REVERSER UPPER SHAFT ........ 110 - 52
5B10 FEED PLATE, FEEDER HOUSE.......................................... 80 - 1 6E18 FEEDER HOUSE LOWER BELT TIGHTENER - SH .......... 110 - 85
6C3 FEEDER CONV. DRIVE CHAIN (VARIABLE DR.) .............. 110 - 16 6E20 FEEDER HOUSE LOWER BELT TIGHTENER-SH ............ 110 - 87
6C3 FEEDER CONV.IDLER BRKT. (VARIABLE DRIVE)............ 110 - 16 6F2 FEEDER HOUSE LOWER CENTER PADDLES - SH ........ 110 - 94
6C2 FEEDER CONVEYOR CHAIN .............................................. 110 - 15 6E14 FEEDER HOUSE LOWER COUNTERSHAFT-SH .............. 110 - 80
6F6 FEEDER CONVEYOR CHAIN-SH ........................................ 110 - 98 6E15 FEEDER HOUSE LOWER COUNTERSHAFT-SH .............. 110 - 81
6C4 FEEDER CONVEYOR DRIVE BRACKET (FIXED).............. 110 - 17 6D8 FEEDER HOUSE LOWER MOUNTINGS ............................ 110 - 45
6F17 FEEDER CONVEYOR DRIVE BRACKET-SH...................... 110 - 110 6E25 FEEDER HOUSE LOWER PADDLES - SIDEHILL.............. 110 - 92
6C4 FEEDER CONVEYOR DRIVE CHAIN (FIXED).................... 110 - 17 6F1 FEEDER HOUSE LOWER PADDLES-SH............................ 110 - 93
6C5 FEEDER CONVEYOR DRIVE CHAIN GUIDES .................. 110 - 18 6D8 FEEDER HOUSE LOWER SHAFT ...................................... 110 - 45
6F17 FEEDER CONVEYOR DRIVE CHAIN-SH............................ 110 - 110 6D6 FEEDER HOUSE LOWER SHAFT (REG FIXED LESS
6C4 FEEDER CONVEYOR DRIVE IDLER (FIXED) .................... 110 - 17 REVERSER) ...................................................................... 110 - 43
6F17 FEEDER CONVEYOR DRIVE IDLER-SH ............................ 110 - 110 6E11 FEEDER HOUSE LOWER SHAFT - SIDEHILL .................. 110 - 77
6C1 FEEDER CONVEYOR DRUM .............................................. 110 - 14 2C17 FEEDER HOUSE LOWER SHAFT SPEED SENSOR ........ 40 - 34
6C3 FEEDER CONVEYOR IDLER (VARIABLE DRIVE) ............ 110 - 16 2C18 FEEDER HOUSE LOWER SHAFT SPEED SENSOR-SH .. 40 - 35
6C1 FEEDER CONVEYOR IDLER SHAFT.................................. 110 - 14 2C19 FEEDER HOUSE LOWER SHAFT SPEED SENSOR-SH .. 40 - 36
6F4 FEEDER CONVEYOR IDLER SHAFT-SH............................ 110 - 96 6C20 FEEDER HOUSE LOWER SHAFT(VARIABLE DRIVE) ...... 110 - 33
6F4 FEEDER DRUM-SH .............................................................. 110 - 96 6E13 FEEDER HOUSE LOWER SHAFT-SH ................................ 110 - 79
6B20 FEEDER HOUSE BOTTOM SHEETS .................................. 110 - 8 6E25 FEEDER HOUSE LOWER SHAFT-SH ................................ 110 - 92
6E3 FEEDER HOUSE BOTTOM SHEETS - SIDEHILL .............. 110 - 69 6F1 FEEDER HOUSE LOWER SHAFT-SH ................................ 110 - 93
6E5 FEEDER HOUSE BOTTOM SHEETS-SH ............................ 110 - 71 6D8 FEEDER HOUSE LOWER SHEAVE .................................... 110 - 45
6F14 FEEDER HOUSE BRACE (R.H.)-SH.................................... 110 - 107 6D6 FEEDER HOUSE LOWER SHEAVE (REG FIXED
6F14 FEEDER HOUSE BRACKET (R.H.)-SH .............................. 110 - 107 LESS REVERSER) .......................................................... 110 - 43
6F3 FEEDER HOUSE CENTER PADDLES - SIDEHILL ............ 110 - 95 6E13 FEEDER HOUSE LOWER SHEAVE-SH.............................. 110 - 79
6F3 FEEDER HOUSE CENTER SHAFTS-SIDEHILL.................. 110 - 95 6C20 FEEDER HOUSE LOWER SHEAVE-VARIABLE DRIVE .... 110 - 33
8F20 FEEDER HOUSE CHAINS (LONG)...................................... 170 - 8 6E14 FEEDER HOUSE LOWER SHEAVES-SH............................ 110 - 80
6F14 FEEDER HOUSE CHAINS (R.H.)-SH .................................. 110 - 107 6E15 FEEDER HOUSE LOWER SHEAVES-SH............................ 110 - 81
8F22 FEEDER HOUSE CHAINS (SIDEHILL) ................................ 170 - 10 6F1 FEEDER HOUSE LOWER SPROCKET-SH ........................ 110 - 93
8F21 FEEDER HOUSE CHAINS (VARIABLE DRIVE).................. 170 - 9 6E25 FEEDER HOUSE LOWER SPROCKET-SIDEHILL.............. 110 - 92
8F23 FEEDER HOUSE CHAINS-SH ............................................ 170 - 11 6C14 FEEDER HOUSE MIDDLE BELT BRACE............................ 110 - 27
6D25 FEEDER HOUSE DOORS - SIDEHILL ................................ 110 - 65 6C14 FEEDER HOUSE MIDDLE BELT IDLERS .......................... 110 - 27
8F25 FEEDER HOUSE DRIVE BELTS (LONG RICE) ................ 170 - 13 6F9 FEEDER HOUSE R.H. SHIELD - SIDEHILL........................ 110 - 101
8F24 FEEDER HOUSE DRIVE BELTS (LONG)............................ 170 - 12 6E10 FEEDER HOUSE REAR TOP SHEETS - SIDEHILL .......... 110 - 76
8G3 FEEDER HOUSE DRIVE BELTS (REG FIXED LESS 6C16 FEEDER HOUSE REVERSER GEAR BOX ........................ 110 - 29
REVERSER) ...................................................................... 170 - 16 6F10 FEEDER HOUSE RIGHT-HAND SHIELD-SH ...................... 110 - 102
8G1 FEEDER HOUSE DRIVE BELTS (REG. FIXED) ................ 170 - 14 6F14 FEEDER HOUSE SHAFT (R.H.)-SH .................................... 110 - 107
8G2 FEEDER HOUSE DRIVE BELTS (SIDEHILL)...................... 170 - 15 6C9 FEEDER HOUSE SHIELD, L.H. (LONG) ............................ 110 - 22
8F19 FEEDER HOUSE DRIVE BELTS (VARIABLE DR.) ............ 170 - 7 6C8 FEEDER HOUSE SHIELD,L.H. (REGULAR FIXED)............ 110 - 21
8D19 FEEDER HOUSE DRIVE IDLER .......................................... 140 - 21 6C6 FEEDER HOUSE SHIELD,R.H.(VARIABLE DRIVE)............ 110 - 19
8F25 FEEDER HOUSE DRIVE IDLERS (LONG RICE) ................ 170 - 13 6C10 FEEDER HOUSE SHIELDS (L.H.) ...................................... 110 - 23
8F25 FEEDER HOUSE DRIVE SHEAVES (LONG RICE) ............ 170 - 13 6E3 FEEDER HOUSE SIDE SHEETS - SIDEHILL .................... 110 - 69
8F24 FEEDER HOUSE DRIVE SHEAVES (LONG)...................... 170 - 12 6E7 FEEDER HOUSE SIDE SHEETS AND FRAME-SH ............ 110 - 73
8G3 FEEDER HOUSE DRIVE SHEAVES (REG FIXED 6E9 FEEDER HOUSE SIDE SHEETS AND FRAME-SH ............ 110 - 75
LESS REVERSER) .......................................................... 170 - 16 6B24 FEEDER HOUSE SIDE SHEETS, LONG ............................ 110 - 12
8G1 FEEDER HOUSE DRIVE SHEAVES (REG. FIXED) .......... 170 - 14 6B22 FEEDER HOUSE SIDE SHEETS,REGULAR ...................... 110 - 10
8G2 FEEDER HOUSE DRIVE SHEAVES (SIDEHILL) ................ 170 - 15 2C12 FEEDER HOUSE SPEED MONITORING HARNESS.......... 40 - 29
10-14 6620 COMBINE PC1666 (18-APR-00)
PN=14
 1A16 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

6F13 FEEDER HOUSE SPROCKET (RH) - SIDEHILL ................ 110 - 105 3C17 FINAL DRIVE BEARINGS .................................................... 50 - 29
8F20 FEEDER HOUSE SPROCKETS (LONG) ............................ 170 - 8 3C18 FINAL DRIVE BEARINGS .................................................... 50 - 30
6F14 FEEDER HOUSE SPROCKETS (R.H.)-SH.......................... 110 - 107 3C21 FINAL DRIVE BEARINGS (SH) ............................................ 50 - 33
8F22 FEEDER HOUSE SPROCKETS (SIDEHILL) ...................... 170 - 10 3C22 FINAL DRIVE BEARINGS (SH) ............................................ 50 - 34
8F21 FEEDER HOUSE SPROCKETS (VARIABLE DRIVE) ........ 170 - 9 3C23 FINAL DRIVE BEARINGS (SH) ............................................ 50 - 35
8F23 FEEDER HOUSE SPROCKETS-SH .................................... 170 - 11 3C17 FINAL DRIVE GEAR ............................................................ 50 - 29
8F24 FEEDER HOUSE TIGHTENERS (LONG) ............................ 170 - 12 3C21 FINAL DRIVE GEAR (SH) .................................................... 50 - 33
6F14 FEEDER HOUSE TIGHTENERS (R.H.)-SH ........................ 110 - 107 3C16 FINAL DRIVE HOUSING ...................................................... 50 - 28
8G3 FEEDER HOUSE TIGHTENERS (REG FIXED LESS 3C20 FINAL DRIVE HOUSING (SH).............................................. 50 - 32
REFERSER) ...................................................................... 170 - 16 3C18 FINAL DRIVE PINION .......................................................... 50 - 30
8G1 FEEDER HOUSE TIGHTENERS (REG. FIXED) ................ 170 - 14 3C22 FINAL DRIVE PINION (SH) .................................................. 50 - 34
6F13 FEEDER HOUSE TIGHTENERS (RH) - SIDEHILL ............ 110 - 105 3C23 FINAL DRIVE PIVOT (SH).................................................... 50 - 35
8G2 FEEDER HOUSE TIGHTENERS (SIDEHILL) ...................... 170 - 15 3C18 FINAL DRIVE SHAFT............................................................ 50 - 30
8F19 FEEDER HOUSE TIGHTENERS (VAR. DR.) ...................... 170 - 7 3C22 FINAL DRIVE SHAFT (SH) .................................................. 50 - 34
6B19 FEEDER HOUSE TOP DOOR LEVER ................................ 110 - 7 3C23 FINAL DRIVE SHAFT (SH) .................................................. 50 - 35
6D25 FEEDER HOUSE TOP SHEET - SIDEHILL ........................ 110 - 65 2C1 FINGERS, TRASH (HARVESTRAK) .................................... 40 - 18
6B19 FEEDER HOUSE TOP SHEETS .......................................... 110 - 7 7E12 FINS AND PLATE, STRAW CHOPPER .............................. 120 - 78
6E2 FEEDER HOUSE TOP SHEETS-SH.................................... 110 - 67 7E11 FINS, PLATE, STRAW CHOPPER ...................................... 120 - 77
6E16 FEEDER HOUSE UPPER COUNTERSHAFT-SH................ 110 - 82 5B25 FIREWALL ............................................................................ 80 - 17
6F7 FEEDER HOUSE UPPER PADDLES - SIDEHILL .............. 110 - 99 3G24 FIRST PLANET CARRIER (FOUR-WHEEL DR.) ................ 50 - 144
6D3 FEEDER HOUSE UPPER SHAFT........................................ 110 - 40 3G24 FIRST PLANET COVER (FOUR-WHEEL DR.) .................... 50 - 144
6D9 FEEDER HOUSE UPPER SHAFT (FIXED DRIVE) ............ 110 - 47 3G24 FIRST PLANET PINION (FOUR-WHEEL DR.) .................... 50 - 144
6D11 FEEDER HOUSE UPPER SHAFT (LONG RICE)................ 110 - 49 7D4 FITTING,CYL.SHAFT BRG.HSG.LUBE BANK-RH .............. 120 - 43
6D12 FEEDER HOUSE UPPER SHAFT (WITH REVERSER)...... 110 - 50 6E24 FITTING,F.H.VAR.DRIVE SHEAVE CONTROL-SH ............ 110 - 91
6D2 FEEDER HOUSE UPPER SHAFT AND SPROCKETS ...... 110 - 39 6E15 FITTING,FEEDER HOUSE LOWER SHEAVES-SH ............ 110 - 81
6F8 FEEDER HOUSE UPPER SHAFT-SH ................................ 110 - 100 6E20 FITTING,GREASE,FDR.HSE.LOWER BELT TGHTNR........ 110 - 87
6F7 FEEDER HOUSE UPPER SHAFT-SIDEHILL ...................... 110 - 99 3G1 FITTINGS AND HOSES, HYDROSTATIC DRIVE................ 50 - 118
6D11 FEEDER HOUSE UPPER SHEAVE (LONG RICE) ............ 110 - 49 6D18 FIXED DR.-FDR.HSE.LOWER BELT TGHTNR.-REG ........ 110 - 56
6D9 FEEDER HOUSE UPPER SHEAVES (FIXED DRIVE)........ 110 - 47 6D18 FIXED DR.-FDR.HSE.LOWER BELT TGHTNR-LONG ........ 110 - 56
6E16 FEEDER HOUSE UPPER SHEAVES-SH ............................ 110 - 82 6D5 FIXED DR.-FDR.HSE.LOWER SHAFT-REG-LONG ............ 110 - 42
6F8 FEEDER HOUSE UPPER SPROCKET-SH ........................ 110 - 100 6D6 FIXED DRIVE LESS REVERSER, FEEDER HOUSE,
6D3 FEEDER HOUSE UPPER SPROCKETS ............................ 110 - 40 LOWER SHAFT ................................................................ 110 - 43
6D12 FEEDER HOUSE UPPER SPROCKETS (WITH REVER 6D6 FIXED DRIVE LESS REVERSER, FEEDER HOUSE,
SER) .................................................................................. 110 - 50 LOWER SHEAVE.............................................................. 110 - 43
6E24 FEEDER HOUSE VAR.DR.SHEAVE CONTROL-SH .......... 110 - 91 6D17 FIXED DRIVE-FDR.HSE.DRIVE TGHTNR.(LONG).............. 110 - 55
4H21 FEEDER HOUSE VARIABLE DRIVE HYD.HOSES-SH ...... 70 - 109 6D16 FIXED DRIVE-FDR.HSE.DRIVE TGHTNR.(REG.) .............. 110 - 54
2C15 FEEDER HSE.LOWER SHAFT SPD.SENSOR-REG........... 40 - 32 6D5 FIXED DRIVE-FDR.HSE.LOWER SHV.(REG-LONG) .......... 110 - 42
2C16 FEEDER HSE.LOWER SHAFT SPEED SENSOR-LONG .. 40 - 33 6D9 FIXED DRIVE-FEEDER HOUSE UPPER SHAFT................ 110 - 47
6C10 FEEDER HSE.SHIELDS-L.H.-FIXED DR.LG.RICE .............. 110 - 23 6D9 FIXED DRIVE-FEEDER HOUSE UPPER SHEAVES .......... 110 - 47
6C7 FEEDER HSE.SHIELDS,L.H. (VARIABLE DRIVE) .............. 110 - 20 2C12 FLASHER, SIGNAL .............................................................. 40 - 29
3C3 FENDERS (DUAL-RANGE CYLINDER DRIVE) 1F8 FLAT ROTARY SCREEN ...................................................... 20 - 98
(HEAVY-DUTY FINAL DRIVE) ........................................ 50 - 14 8B20 FLIP-UPS, GRAIN TANK ...................................................... 130 - 11
3C3 FENDERS (DUAL-RANGE CYLINDER DRIVE) 5C21 FLOORBOARD, OPERATOR’S PLATFORM........................ 90 - 11
(REGULAR FINAL DRIVE) .............................................. 50 - 14 5C23 FLOORMAT, L.H. REAR ...................................................... 90 - 13
3C2 FENDERS (EXTRA HEAVY-DUTY FINAL DRIVE).............. 50 - 13 5C21 FLOORMAT, OPERATOR’S PLATFORM ............................ 90 - 11
3C4 FENDERS (EXTRA HEAVY-DUTY FINAL DRIVE) 4F6 FLOW CONTROL PLUG ...................................................... 70 - 42
(DUAL-RANGE CYLINDER DRIVE) ................................ 50 - 15 4H15 FLOW CONTROL VALVE, HYDROSTATIC DR. REEL ...... 70 - 103
3C1 FENDERS (HEAVY-DUTY FINAL DRIVE) .......................... 50 - 12 3H4 FLOW CONTROL VALVES (FOUR-WHEEL DRIVE) .......... 50 - 149
3C1 FENDERS (REGULAR FINAL DRIVE) ................................ 50 - 12 3I2 FLOW CONTROL VALVES (FOUR-WHEEL DRIVE) .......... 50 - 179
2C14 FIELD LIGHTS ...................................................................... 40 - 31 8E10 FLOW DIVIDER MOUNTING - SIDEHILL ............................ 150 - 16
5D20 FILTER AND HOUSING, CAB AIR ...................................... 90 - 37 8E11 FLOW DIVIDER MOUNTING - SIDEHILL ............................ 150 - 17
5D20 FILTER, CAB AIR.................................................................. 90 - 37 8E10 FLOW DIVIDER VALVE - SIDEHILL .................................... 150 - 16
1E8 FILTER, ENGINE OIL (DH) .................................................. 20 - 72 8E11 FLOW DIVIDER VALVE - SIDEHILL .................................... 150 - 17
1F24 FILTER, FUEL ...................................................................... 30 - 5 1C19 FLYWHEEL ............................................................................ 20 - 32
1H12 FILTER, FUEL ...................................................................... 30 - 48 3C5 FORKS, SHIFTER, DIFFERENTIAL .................................... 50 - 16
1G17 FILTER, FUEL (DH) .............................................................. 30 - 25 3H5 FOUR-WHEEL DRIVE (SUNDSTRAND) .............................. 50 - 151
1G1 FILTER, FUEL (EXPORT) .................................................... 30 - 7 2D3 FOUR-WHEEL DRIVE SWITCH .......................................... 40 - 45
1H10 FILTER, FUEL (TH 01).......................................................... 30 - 46 5C3 FRAME AND DOOR,ENGINE COMPT.MIDDLE .................. 80 - 20
1H11 FILTER, FUEL (TH 05).......................................................... 30 - 47 5B14 FRAME AND SEPARATOR L.H. SIDE SHEETS ................ 80 - 5
1H15 FILTER, FUEL (TH 05).......................................................... 30 - 52 6E7 FRAME AND SIDE SHEETS, FEEDER HOUSE-SH .......... 110 - 73
4D15 FILTER, HYDRAULIC RESERVOIR .................................... 70 - 2 7F17 FRAME, CHAFFER .............................................................. 120 - 109
3I4 FILTER, OIL RETURN LINES .............................................. 50 - 181 5B25 FRAME, CORNER ................................................................ 80 - 17
3C15 FINAL DRIVE ........................................................................ 50 - 27 3G11 FRAME, CRAWLER, R.H. AND L.H..................................... 50 - 129
3C17 FINAL DRIVE AXLE .............................................................. 50 - 29 6E10 FRAME, FEEDER HOUSE - SIDEHILL................................ 110 - 76
3C21 FINAL DRIVE AXLE (SH)...................................................... 50 - 33 6E9 FRAME, FEEDER HOUSE-SH ............................................ 110 - 75
3C16 FINAL DRIVE BEARING CAP .............................................. 50 - 28 6B24 FRAME, FEEDER HOUSE, LONG ...................................... 110 - 12
3C20 FINAL DRIVE BEARING CAP (SH)...................................... 50 - 32 6B22 FRAME, FEEDER HOUSE, REGULAR ................................ 110 - 10
6620 COMBINE PC1666 (18-APR-00) 10-15
PN=15
 1A17 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

5C21 FRAME, OPERATOR’S PLATFORM .................................... 90 - 11 1E23 GASKET SET, CYLINDER HEAD (DH)................................ 20 - 88
4C20 FRAME, REAR AXLE (FOUR-WHEEL DR.) ........................ 60 - 37 1E23 GASKET SET, ENGINE REBUILD (DH) .............................. 20 - 88
5B11 FRAME, SEPARATOR RIGHT-HAND .................................. 80 - 2 1D9 GASKET, CYLINDER HEAD (DH)........................................ 20 - 48
7F15 FRAME, SIEVE...................................................................... 120 - 107 1D11 GASKET, CYLINDER HEAD (TH) ........................................ 20 - 50
8C5 FRONT AND REAR GRAIN TANK AUGER COVERS, 3C6 GASKET, DIFFERENTIAL .................................................... 50 - 17
ADJUSTABLE.................................................................... 130 - 20 1E19 GASKET, INTAKE MANIFOLD (DH) .................................... 20 - 83
3E15 FRONT COVER, HYDRO. DRIVE PUMP (EATON) ............ 50 - 81 1E20 GASKET, INTAKE MANIFOLD (TH) .................................... 20 - 84
3E14 FRONT COVER, HYDROSTATIC DRIVE 1E13 GASKET, OIL PAN................................................................ 20 - 77
(SUNDSTRAND)................................................................ 50 - 80 1E14 GASKET, OIL PAN................................................................ 20 - 78
3E13 FRONT COVER, HYDROSTATIC DRIVE PUMP 1E16 GASKET, OIL PAN................................................................ 20 - 80
(SUNDSTRAND)................................................................ 50 - 79 1E11 GASKET, OIL PAN (DH) ...................................................... 20 - 75
8C2 FRONT CROSS AUGER, GRAIN TANK.............................. 130 - 17 1D13 GASKET, ROCKER ARM COVER (DH) .............................. 20 - 52
5C5 FRONT ENGINE COMPARTMENT PANEL ........................ 80 - 22 1C25 GASKET, TIMING GEAR COVER ........................................ 20 - 38
1C25 FRONT OIL SEAL ................................................................ 20 - 38 3C6 GASKET, TRANSMISSION .................................................. 50 - 17
6D22 FRONT SHEETS, FEEDER HOUSE - SIDEHILL ................ 110 - 61 1E17 GASKET, WATER PUMP (DH) ............................................ 20 - 81
5B10 FRONT SHEETS, SEPARATOR .......................................... 80 - 1 3F13 GASKET,HYDRO.DR.DISPLACEMENT CTL.VALVE
1H14 FUEL CHECK VALVE (TH) .................................................. 30 - 50 (SUNDSTRAND)................................................................ 50 - 104
1F24 FUEL FILTER ........................................................................ 30 - 5 1E21 GASKETS, EXHAUST MANIFOLD (DH) .............................. 20 - 86
1H12 FUEL FILTER ........................................................................ 30 - 48 1E22 GASKETS, EXHAUST MANIFOLD (TH) .............................. 20 - 87
1G17 FUEL FILTER (DH) .............................................................. 30 - 25 2C3 GAUGE, ACCUMULATOR PRESSURE .............................. 40 - 20
1G1 FUEL FILTER (EXPORT) ...................................................... 30 - 7 2D5 GAUGE, FUEL ...................................................................... 40 - 47
1H10 FUEL FILTER (TH 01) .......................................................... 30 - 46 2D5 GAUGE, OIL PRESSURE .................................................... 40 - 47
1H11 FUEL FILTER (TH 05) .......................................................... 30 - 47 2D5 GAUGE, WATER TEMPERATURE ...................................... 40 - 47
1H15 FUEL FILTER (TH 05) .......................................................... 30 - 52 2C7 GAUGE, WATER TEMPERATURE, SENDING UNIT .......... 40 - 24
1H13 FUEL FILTER KIT ................................................................ 30 - 49 2D5 GAUGES, INSTRUMENT PANEL ........................................ 40 - 47
2D5 FUEL GAUGE........................................................................ 40 - 47 6C16 GEAR BOX, REVERSER ...................................................... 110 - 29
2C6 FUEL GAUGE SENDING UNIT ............................................ 40 - 23 7C24 GEAR CASE SHIELD, DUAL-RANGE CYLINDER
1G24 FUEL INJECTION NOZZLE (DH) ........................................ 30 - 34 DRIVE ................................................................................ 120 - 39
1I1 FUEL INJECTION NOZZLE (TH).......................................... 30 - 64 7C20 GEAR CASE, CYLINDER, DUAL-RANGE............................ 120 - 34
1G18 FUEL INJECTION NOZZLES (DH) ...................................... 30 - 26 7G23 GEAR CASE, LOADING AUGER ........................................ 120 - 141
1H17 FUEL INJECTION NOZZLES (TH 01).................................. 30 - 54 8C13 GEAR CASE, LOWER, VERTICAL AUGER ........................ 130 - 29
1H19 FUEL INJECTION NOZZLES (TH 05).................................. 30 - 56 8C21 GEAR CASE,DRIVE,HORIZONTAL UNLDG.AUGER .......... 130 - 37
1G18 FUEL INJECTION PIPES (DH) ............................................ 30 - 26 8C21 GEAR CASE,HORIZONTAL UNLDG.AUGER DRIVE.......... 130 - 37
1H17 FUEL INJECTION PIPES (TH 01)........................................ 30 - 54 1D4 GEAR COVER, TACHOMETER DRIVE .............................. 20 - 42
1G20 FUEL INJECTION PUMP (DH) ............................................ 30 - 28 1D2 GEAR, CAMSHAFT (DH) ...................................................... 20 - 40
1H17 FUEL INJECTION PUMP (TH 01) ........................................ 30 - 54 1D3 GEAR, CAMSHAFT (TH) ...................................................... 20 - 41
1H21 FUEL INJECTION PUMP (TH 05) ........................................ 30 - 59 3C17 GEAR, FINAL DRIVE ............................................................ 50 - 29
1G21 FUEL INJECTION PUMP FITTINGS AND LINKAGE 3C21 GEAR, FINAL DRIVE (SH) .................................................. 50 - 33
(DH) .................................................................................. 30 - 30 1C19 GEAR, STARTER .................................................................. 20 - 32
1H24 FUEL INJECTION PUMP GOVERNOR LEVERS AND 6C21 GEARBOX MOUNTING ASSEMBLY, FDR.HSE.-SH .......... 110 - 34
CONTROLS (TH) .............................................................. 30 - 62 3C11 GEARS, DIFFERENTIAL ...................................................... 50 - 22
1H22 FUEL INJECTION PUMP HOUSING CONNECTORS 3C13 GEARS, DIFFERENTIAL ...................................................... 50 - 24
(TH).................................................................................... 30 - 60 7C22 GEARS, PINION, DUAL-RANGE CYLINDER DRIVE .......... 120 - 36
1F24 FUEL LINES .......................................................................... 30 - 5 3C8 GEARS, TRANSMISSION .................................................... 50 - 19
1F25 FUEL LINES (EXPORT)........................................................ 30 - 6 3C10 GEARS, TRANSMISSION .................................................... 50 - 21
1H15 FUEL PIPES (TH 05) ............................................................ 30 - 52 3B21 GEARSHIFT CABLES AND MOUNTINGS .......................... 50 - 7
1H19 FUEL PIPES (TH 05) ............................................................ 30 - 56 3B16 GEARSHIFT LEVER AND CAM (POSI-TORQ) .................. 50 - 2
1F24 FUEL PUMP .......................................................................... 30 - 5 3B17 GEARSHIFT LEVER ASSEMBLY-HYDROSTATIC DR. ...... 50 - 3
1H1 FUEL PUMP (DH).................................................................. 30 - 36 3B19 GEARSHIFT RANGE SHIFTER AND SUPPORT ................ 50 - 5
1G4 FUEL SHUT-OFF BRACKET (TH)........................................ 30 - 10 4D15 GLASS, LEVEL SIGHT, HYDRAULIC RESERVOIR............ 70 - 2
1G2 FUEL SHUT-OFF CONTROL................................................ 30 - 8 1H24 GOVERNOR LEVERS AND CONTROLS, FUEL
1G3 FUEL SHUT-OFF CONTROL................................................ 30 - 9 INJECTION PUMP (TH).................................................... 30 - 62
1F22 FUEL TANK .......................................................................... 30 - 3 2C1 GRAIN LOSS CONSOLE, HARVESTRAK .......................... 40 - 18
1F22 FUEL TANK SUPPORT ........................................................ 30 - 3 8B12 GRAIN TANK ........................................................................ 130 - 3
1G23 FUEL TRANSFER PUMP (DH) ............................................ 30 - 32 8B14 GRAIN TANK ........................................................................ 130 - 5
1I4 FUEL TRANSFER PUMP (ROBERT BOSCH) .................... 30 - 67 8C11 GRAIN TANK CROSS AUGER DRIVE TIGHTENERS........ 130 - 27
1H17 FUEL TRANSFER PUMP (TH 01)........................................ 30 - 54 8B20 GRAIN TANK DOOR ............................................................ 130 - 11
1H21 FUEL TRANSFER PUMP (TH 05)........................................ 30 - 59 8B20 GRAIN TANK EXTENSIONS ................................................ 130 - 11
1I3 FUEL TRANSFER PUMP (TH) ............................................ 30 - 66 8B20 GRAIN TANK FLIP-UPS ...................................................... 130 - 11
8E24 FULL FLOW PLUG, AUTOMATIC HDR.HGT.CTL............... 160 - 7 8C2 GRAIN TANK FRONT CROSS AUGER .............................. 130 - 17
8E17 FUSE AND SWITCHES, SIDEHILL LEVELING .................. 150 - 24 8C4 GRAIN TANK INNER UNLOADING AUGER COVERS ...... 130 - 19
2B17 GRAIN TANK LIGHT ............................................................ 40 - 7
8C3 GRAIN TANK REAR CROSS AUGER ................................ 130 - 18
G 8B16 GRAIN TANK SKIRTS .......................................................... 130 - 7
8B21 GRAIN TANK SUMP BAFFLE .............................................. 130 - 12
1F1 GASKET KIT, CYLINDER HEAD (TH) ................................ 20 - 90 8C8 GRAIN TANK SUMP HOUSING AND SHIELD.................... 130 - 23
1F1 GASKET KIT, ENGINE REBUILD (TH) ................................ 20 - 90 8C9 GRAIN TANK SUMP HOUSING AND SHIELD.................... 130 - 24
10-16 6620 COMBINE PC1666 (18-APR-00)
PN=16
 1A18 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

8C15 GRAIN TANK VERTICAL AUGER AND HOUSING ............ 130 - 31 4I4 HEADER LIFT HYDRAULIC CYLINDER KIT ...................... 70 - 118
8C6 GRASS SEED UNLDG.AUG.COVERS ATTACHMENT ...... 130 - 21 4I5 HEADER LIFT HYDRAULIC CYLINDER KIT-SH ................ 70 - 119
7B21 GRATE, BEATER .................................................................. 120 - 9 4I3 HEADER LIFT HYDRAULIC CYLINDER-SH........................ 70 - 117
2D12 GRILLE, PUSH BUTTON ...................................................... 40 - 55 4I1 HEADER LIFT OIL LINES .................................................... 70 - 115
2E4 GRILLE, RADIO .................................................................... 40 - 71 5D17 HEADLINER, CAB ROOF .................................................... 90 - 34
2D12 GRILLE, TAPE PLAYER ...................................................... 40 - 55 5E16 HEATER CONTROL VALVE ................................................ 90 - 60
5E16 GROMMET, HEATER HOSES.............................................. 90 - 60 5E15 HEATER CORE .................................................................... 90 - 59
3D14 GROUND DRIVE POSI-TORQ UPPER UNIT...................... 50 - 53 5E16 HEATER HOSES .................................................................. 90 - 60
3D7 GROUND DRIVE, POSI-TORQ, LOWER UNIT .................. 50 - 44 5E17 HEATER HOSES .................................................................. 90 - 61
3D11 GROUND SPEED CONTROLS, POSI-TORQ...................... 50 - 49 1F6 HEATER, ENGINE COOLANT.............................................. 20 - 96
7E23 GUARD, STRAW SPREADER.............................................. 120 - 89 1F7 HEATER, ENGINE COOLANT.............................................. 20 - 97
6C5 GUIDES, FEEDER CONVEYOR DRIVE CHAIN.................. 110 - 18 5E14 HI PRESSURE SWITCH LIGHT ASSEMBLY ...................... 90 - 58
5E3 HI PRESSURE SWITCH, AIR CONDITIONER .................... 90 - 45
3F16 HIGH PRESSURE RELIEF VALVE (EATON) ...................... 50 - 107
H 6E2 HINGE,FEEDER HOUSE TOP SHEETS-SH........................ 110 - 67
7H15 HOOD, DIP AND POUR ELEVATOR TOP .......................... 120 - 159
5D14 HANDLE, CAB ...................................................................... 90 - 31 5B16 HOOD, REAR ........................................................................ 80 - 7
7E15 HANDLE, STRAW CHOPPER CURTAIN ............................ 120 - 81 5B18 HOOD, REAR ........................................................................ 80 - 9
7E7 HANDLE, STRAW CHOPPER HOUSING ............................ 120 - 73 2B14 HOOD, REAR, WIRING HARNESS...................................... 40 - 3
7E8 HANDLE, STRAW CHOPPER HOUSING ............................ 120 - 74 8C21 HORIZONTAL UNLDG.AUGER DRIVE GEAR CASE ........ 130 - 37
7E20 HANDLE, STRAW CHOPPER KNIFE AND SUPPORT ...... 120 - 86 8C23 HORIZONTAL UNLOADING AUGER .................................. 130 - 39
7E15 HANDLE, STRAW CHOPPER SHIELDS ............................ 120 - 81 8C17 HORIZONTAL UNLOADING AUGER SWIVEL .................... 130 - 33
5C13 HANDRAIL, OPERATOR’S PLATFORM .............................. 90 - 3 8B18 HORIZONTAL UNLOADING AUGER SWIVEL SHROUD .. 130 - 9
5C17 HANDRAIL, OPERATOR’S PLATFORM (EXPORT) ............ 90 - 7 2C12 HORN .................................................................................... 40 - 29
5C15 HANDRAILS, OPERATOR’S PLATFORM (TRACKS).......... 90 - 5 2D2 HORN SWITCH .................................................................... 40 - 43
5E9 HARDWARE KIT, COMPRESSOR ...................................... 90 - 53 4H12 HOSE AND COUPLER CONVERSION ................................ 70 - 100
8F3 HARNESS ADAPTER, DIAL-A-MATIC ................................ 160 - 12 4H18 HOSE, HYDRAULIC, VARIABLE DRIVE FDR.HSE............. 70 - 106
5E2 HARNESS, COMPRESSOR.................................................. 90 - 44 1E13 HOSE, OIL PAN DRAIN........................................................ 20 - 77
8F8 HARNESS, DIAL-A-MATIC CONVERSION .......................... 160 - 18 1E14 HOSE, OIL PAN DRAIN........................................................ 20 - 78
8F3 HARNESS, ELECTRIC .......................................................... 160 - 12 7D4 HOSE,CYL.SHAFT BRG.HSG.LUBE BANK (R.H.).............. 120 - 43
2C12 HARNESS, FEEDER HOUSE SPEED MONITORING ........ 40 - 29 4H10 HOSES AND COUPLER FOR COMBINES ........................ 70 - 98
2B25 HARNESS, HARVESTRAK ADAPTER ................................ 40 - 17 3G1 HOSES AND FITTINGS, HYDROSTATIC DRIVE................ 50 - 118
2B22 HARNESS, LOW SHAFT SPEED MONITOR’S .................. 40 - 13 3H6 HOSES AND LINES, HYD. (FOUR-WHEEL DR.)
2E20 HARNESS, MAGNETIC PICK-UP (DH)................................ 40 - 89 (EATON) ............................................................................ 50 - 153
2C6 HARNESS, SEPARATOR, RIGHT-HAND ............................ 40 - 23 4F8 HOSES AND LINES, HYDRAULIC OIL................................ 70 - 44
8E16 HARNESS, SIDEHILL LEVELING ........................................ 150 - 23 3I4 HOSES AND LINES, HYDRAULIC OIL RETURN .............. 50 - 181
2D10 HARNESS, WIRING .............................................................. 40 - 53 3H5 HOSES AND LINES,HYD. (FOUR-WHEEL DRIVE)
2D7 HARNESS, WIRING, CAB ROOF ........................................ 40 - 49 (SUNDSTRAND)................................................................ 50 - 151
2C7 HARNESS, WIRING, ENGINE COMPARTMENT ................ 40 - 24 4C11 HOSES AND LINES,STEERING OIL
2C21 HARNESS, WIRING, INSTRUMENT PANEL (AHHC) ........ 40 - 38 (FOUR-WHEEL DRIVE) .................................................... 60 - 27
2C12 HARNESS, WIRING, LEFT-HAND LIGHTS ........................ 40 - 29 4C6 HOSES AND OIL LINES-FRONT, STEERING .................... 60 - 21
2C12 HARNESS, WIRING, OPERATOR’S PLATFORM................ 40 - 29 1F14 HOSES AND RADIATOR ...................................................... 20 - 104
2B14 HARNESS, WIRING, REAR HOOD...................................... 40 - 3 4C9 HOSES-REAR, STEERING OIL LINES................................ 60 - 25
2B14 HARNESS, WIRING, SEPARATOR (L.H.) .......................... 40 - 3 4H7 HOSES, DRIVE REEL HYDRAULIC .................................... 70 - 94
2B14 HARNESS, WIRING, UNLOADING AUGER ........................ 40 - 3 5E16 HOSES, HEATER.................................................................. 90 - 60
8F2 HARNESS,WIRING,AUTO.HDR.HEIGHT CONTROL .......... 160 - 11 5E17 HOSES, HEATER.................................................................. 90 - 61
2B25 HARVESTRAK ADAPTER HARNESS.................................. 40 - 17 3H4 HOSES, HYDRAULIC (FOUR-WHEEL DRIVE) .................. 50 - 149
2D5 HARVESTRAK CIRCUIT BREAKER .................................... 40 - 47 3I2 HOSES, HYDRAULIC (FOUR-WHEEL DRIVE) .................. 50 - 179
2C1 HARVESTRAK COMBINE MONITOR .................................. 40 - 18 8E14 HOSES, HYDRAULIC LOWER - SIDEHILL ........................ 150 - 21
2C1 HARVESTRAK COMBINE MONITOR CONTROL PANEL .. 40 - 18 4F11 HOSES, HYDRAULIC OIL LINES AND................................ 70 - 47
2C1 HARVESTRAK COMBINE MONITOR PREAMPLIFIER ...... 40 - 18 4F13 HOSES, HYDRAULIC OIL LINES AND................................ 70 - 49
1D9 HEAD BOLTS (DH) .............................................................. 20 - 48 3H8 HOSES, HYDRAULIC OIL RETURN LINES AND .............. 50 - 155
1D11 HEAD BOLTS (TH)................................................................ 20 - 50 8E13 HOSES, HYDRAULIC UPPER - SIDEHILL.......................... 150 - 19
1D9 HEAD, CYLINDER (DH)........................................................ 20 - 48 3G4 HOSES, LOWER OIL, HYDROSTATIC DRIVE
1D11 HEAD, CYLINDER (TH) ........................................................ 20 - 50 (SUNDSTRAND)................................................................ 50 - 122
6D19 HEADER DRIVE SHAFT - SIDEHILL .................................. 110 - 57 3G6 HOSES, LOWER, HYDRO. DR. .......................................... 50 - 124
6D20 HEADER DRIVE SHAFT-SIDEHILL...................................... 110 - 59 4H9 HOSES, REEL LIFT, SIDEHILL............................................ 70 - 97
2B19 HEADER ELECTROMAGNETIC CLUTCH .......................... 40 - 9 4C7 HOSES,-REAR, STEERING OIL LINE ................................ 60 - 23
2C23 HEADER HEIGHT CONTROL, DIAL-A-MATIC .................... 40 - 40 4H21 HOSES,HYD.,FDR.HSE. VARIABLE DRIVE-SH.................. 70 - 109
8F3 HEADER HEIGHT CONTROL, DIAL-A-MATIC .................... 160 - 12 4G5 HOSES,UNLOADING AUGER SWING HYDRAULIC .......... 70 - 66
8F5 HEADER HGT.CTL.,DIAL-A-MATIC,AMPLIFIER.................. 160 - 14 4G7 HOSES,UNLOADING AUGER SWING HYDRAULIC .......... 70 - 68
6F19 HEADER LEVELING CABLES (L.H.)-SH ............................ 110 - 112 2D2 HOUR METER ...................................................................... 40 - 43
6F18 HEADER LEVELING CABLES-SIDEHILL ............................ 110 - 111 6B20 HOUSE, FEEDER, BOTTOM SHEETS ................................ 110 - 8
6F20 HEADER LEVELING CABLES, L.H.-SH .............................. 110 - 113 6B17 HOUSE, FEEDER, FRONT SHEETS .................................. 110 - 5
6F19 HEADER LEVELING MOUNTING (L.H.)-SH ........................ 110 - 112 5D20 HOUSING AND FILTER, CAB AIR ...................................... 90 - 37
6F20 HEADER LEVELING MOUNTING, L.H.-SH ........................ 110 - 113 8C8 HOUSING AND SHIELD, GRAIN TANK SUMP .................. 130 - 23
4I2 HEADER LIFT HYDRAULIC CYLINDER.............................. 70 - 116 8C9 HOUSING AND SHIELD, GRAIN TANK SUMP .................. 130 - 24
6620 COMBINE PC1666 (18-APR-00) 10-17
PN=17
 1A19 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

8C15 HOUSING AND VERTICAL AUGER, GRAIN TANK............ 130 - 31 4G5 HYD. OIL LINES,UNLOADING AUGER SWING.................. 70 - 66
3E20 HOUSING HYDRO. DRIVE PUMP (EATON) ...................... 50 - 86 4G7 HYD. OIL LINES,UNLOADING AUGER SWING.................. 70 - 68
2E6 HOUSING, ALTERNATOR, 72 AMP .................................... 40 - 74 4E20 HYD.CONTROL VALVE POPPETS,MAIN-POSI-TORQ ...... 70 - 31
2E8 HOUSING, ALTERNATOR, 90 AMP .................................... 40 - 76 4E22 HYD.CONTROL VALVE POPPETS,MAIN-POSI-TORQ ...... 70 - 33
7H13 HOUSING, AUGER, DIP AND POUR ELEVATOR.............. 120 - 157 4F1 HYD.CONTROL VALVE POPPETS,MAIN-POSI-TORQ ...... 70 - 37
7G11 HOUSING, CLEAN GRAIN ELEVATOR .............................. 120 - 129 4F2 HYD.CONTROL VALVE SPOOLS-MAIN-POSI-TORQ ........ 70 - 38
7G12 HOUSING, CLEAN GRAIN ELEVATOR .............................. 120 - 130 4E12 HYD.CONTROL VALVE SPOOLS,MAIN-HYDRO. .............. 70 - 23
7G7 HOUSING, CLEAN GRAIN LOWER AUGER ...................... 120 - 125 4E10 HYD.CONTROL VALVE SPOOLS,MAIN-HYDRO.-SH ........ 70 - 21
7G9 HOUSING, CLEAN GRAIN LOWER AUGER ...................... 120 - 127 4E21 HYD.CONTROL VALVE SPOOLS,MAIN-POSI-TORQ ........ 70 - 32
7G2 HOUSING, CLEANING FAN ................................................ 120 - 119 4E23 HYD.CONTROL VALVE SPOOLS,MAIN-POSI-TORQ ........ 70 - 34
1D1 HOUSING, CRANKSHAFT OIL SEAL .................................. 20 - 39 4E25 HYD.CONTROL VALVE SPOOLS,MAIN-POSI-TORQ ........ 70 - 36
3C5 HOUSING, DIFFERENTIAL .................................................. 50 - 16 4E20 HYD.CONTROL VALVE SPRINGS,MAIN-POSI-TORQ ...... 70 - 31
3C13 HOUSING, DIFFERENTIAL GEARS AND SHAFTS ............ 50 - 24 4E22 HYD.CONTROL VALVE SPRINGS,MAIN-POSI-TORQ ...... 70 - 33
3D8 HOUSING, DRIVE WHEEL CLUTCH .................................. 50 - 45 4E24 HYD.CONTROL VALVE SPRINGS,MAIN-POSI-TORQ ...... 70 - 35
8D3 HOUSING, ENGINE POWERSHAFT.................................... 140 - 3 4F1 HYD.CONTROL VALVE SPRINGS,MAIN-POSI-TORQ ...... 70 - 37
6D14 HOUSING, FEEDER HOUSE LESS REVERSER 4E24 HYD.CONTROL VALVE,POPPETS,MAIN-POSI-TORQ ...... 70 - 35
UPPER SHAFT ................................................................ 110 - 52 4E12 HYD.CONTROL,MAIN,RELIEF VALVE-HYDRO................... 70 - 23
6D3 HOUSING, FEEDER HOUSE UPPER SHAFT .................... 110 - 40 4E10 HYD.CONTROL,MAIN,RELIEF VALVE-HYDRO.-SH .......... 70 - 21
6D12 HOUSING, FEEDER HOUSE UPPER SHAFT (WITH 4E21 HYD.CONTROL,MAIN,RELIEF VALVE-POSI-TORQ .......... 70 - 32
REVERSER) ...................................................................... 110 - 50 4E23 HYD.CONTROL,MAIN,RELIEF VALVE-POSI-TORQ .......... 70 - 34
6F8 HOUSING, FEEDER HOUSE UPPER SHAFT-SH .............. 110 - 100 4E25 HYD.CONTROL,MAIN,RELIEF VALVE-POSI-TORQ .......... 70 - 36
3C16 HOUSING, FINAL DRIVE...................................................... 50 - 28 4F2 HYD.CONTROL,MAIN,RELIEF VALVE-POSI-TORQ .......... 70 - 38
3C20 HOUSING, FINAL DRIVE (SH) ............................................ 50 - 32 4H21 HYD.HOSES,VARIABLE DRIVE FEEDER HOUSE-SH ...... 70 - 109
8C23 HOUSING, HORIZONTAL UNLOADING AUGER ................ 130 - 39 4E14 HYDRAULIC CONTROL VALVE SPOOLS, MAIN .............. 70 - 25
3E18 HOUSING, HYDRO. DRIVE PUMP (SUNDSTRAND) ........ 50 - 84 4E16 HYDRAULIC CONTROL VALVE SPOOLS, MAIN .............. 70 - 27
3E17 HOUSING, HYDROSTATIC DRIVE PUMP 4E13 HYDRAULIC CONTROL VALVE SPRINGS, MAIN.............. 70 - 24
(SUNDSTRAND)................................................................ 50 - 83 4E15 HYDRAULIC CONTROL VALVE SPRINGS, MAIN.............. 70 - 26
3G25 HOUSING, KNEE AND MOTOR (FOUR-WHEEL DR.) ...... 50 - 145 4E14 HYDRAULIC CONTROL, MAIN RELIEF VALVE ................ 70 - 25
7G21 HOUSING, LOADING AUGER.............................................. 120 - 139 4H24 HYDRAULIC CYL.,VARIABLE DR.FDR.HSE.-SH ................ 70 - 112
7H23 HOUSING, LOWER TAILINGS ............................................ 120 - 167 4I4 HYDRAULIC CYLINDER KIT, HEADER LIFT...................... 70 - 118
7H4 HOUSING, LOWER, DIP AND POUR ELEVATOR ............ 120 - 147 4I5 HYDRAULIC CYLINDER KIT, HEADER LIFT-SH................ 70 - 119
4D18 HOUSING, MAIN HYD. PUMP ............................................ 70 - 5 4I2 HYDRAULIC CYLINDER, HEADER LIFT ............................ 70 - 116
4D19 HOUSING, MAIN HYDRAULIC PUMP ................................ 70 - 6 4G10 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 71
3G23 HOUSING, PLANETARY (FOUR-WHEEL DRIVE) .............. 50 - 143 4G11 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 72
7B18 HOUSING, RASP-BAR CYLINDER (DUAL-RANGE 4G13 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 74
CYLINDER DRIVE) .......................................................... 120 - 6 4G15 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 76
7F3 HOUSING, SHOE GRAIN SUPPLY AUGERS .................... 120 - 95 4H19 HYDRAULIC HOSE, FEEDER HOUSE ................................ 70 - 107
2E14 HOUSING, STARTER DRIVE (DH) ...................................... 40 - 82 4H18 HYDRAULIC HOSE,VARIABLE DRIVE FDR.HSE............... 70 - 106
7E7 HOUSING, STRAW CHOPPER ............................................ 120 - 73 3H4 HYDRAULIC HOSES (FOUR-WHEEL DRIVE) .................... 50 - 149
7E8 HOUSING, STRAW CHOPPER ............................................ 120 - 74 3I2 HYDRAULIC HOSES (FOUR-WHEEL DRIVE) .................... 50 - 179
7H25 HOUSING, TAILINGS ELEVATOR ...................................... 120 - 169 4H7 HYDRAULIC HOSES, DRIVE REEL .................................... 70 - 94
7I1 HOUSING, TAILINGS ELEVATOR ...................................... 120 - 170 4G5 HYDRAULIC HOSES,UNLOADING AUGER SWING .......... 70 - 66
1G7 HOUSING, THROTTLE LINKAGE CONTROL .................... 30 - 13 4G7 HYDRAULIC HOSES,UNLOADING AUGER SWING .......... 70 - 68
1G7 HOUSING, THROTTLE LINKAGE CONTROL LEVER ........ 30 - 13 8E14 HYDRAULIC LOWER HOSES - SIDEHILL .......................... 150 - 21
3C5 HOUSING, TRANSMISSION ................................................ 50 - 16 8E14 HYDRAULIC LOWER LINES - SIDEHILL ............................ 150 - 21
1H2 HOUSING, TURBOCHARGER (AIRESEARCH) .................. 30 - 37 4G11 HYDRAULIC MOUNTING,UNLOADING AUGER SWING.... 70 - 72
1H4 HOUSING, TURBOCHARGER (AIRESEARCH) .................. 30 - 39 4G13 HYDRAULIC MOUNTING,UNLOADING AUGER SWING.... 70 - 74
1H3 HOUSING, TURBOCHARGER CENTER(AIRESEARCH).... 30 - 38 4G15 HYDRAULIC MOUNTING,UNLOADING AUGER SWING.... 70 - 76
1H5 HOUSING, TURBOCHARGER CENTER(AIRESEARCH).... 30 - 40 8E24 HYDRAULIC OIL LINE AUTO.HDR.HGT.CONTROL .......... 160 - 7
7I6 HOUSING, UPPER TAILINGS .............................................. 120 - 176 4F8 HYDRAULIC OIL LINES AND HOSES ................................ 70 - 44
4D4 HOUSING, WHEEL MOTOR (FOUR-WHEEL DR.) ............ 60 - 45 4F11 HYDRAULIC OIL LINES AND HOSES ................................ 70 - 47
3G21 HOUSING,WHEEL HUB,AND MOTOR (FOUR-WHEEL 4F13 HYDRAULIC OIL LINES AND HOSES ................................ 70 - 49
DR.).................................................................................... 50 - 141 4D15 HYDRAULIC OIL RESERVOIR ............................................ 70 - 2
1H6 HOUSINGS, TURBOCHARGER (SCHWITZER) .................. 30 - 41 3H8 HYDRAULIC OIL RETURN LINES AND HOSES ................ 50 - 155
4D3 HOUSINGS,REAR AXLE SPINDLE-(HEAVY-DUTY) .......... 60 - 44 3I4 HYDRAULIC OIL RETURN LINES AND HOSES ................ 50 - 181
6E13 HUB, FEEDER HOUSE LOWER SHAFT-SH ...................... 110 - 79 4H14 HYDRAULIC PUMP MTG.,HYDROSTATIC DR.REEL ........ 70 - 102
6E15 HUB,FEEDER HOUSE LOWER SHEAVES-SH .................. 110 - 81 4H4 HYDRAULIC PUMP, HYDROSTATIC DRIVE REEL............ 70 - 91
3G21 HUB,MOTOR,AND HOUSING,WHEEL (FOUR-WHEEL 4D19 HYDRAULIC PUMP, MAIN .................................................. 70 - 6
DR.).................................................................................... 50 - 141 4G25 HYDRAULIC REEL LIFT CONTROL LEVER ...................... 70 - 87
4E8 HYD. CONTROL VALVE POPPETS, MAIN-HYDRO........... 70 - 19 8F18 HYDRAULIC REEL LIFT DRIVE SHEAVES ........................ 170 - 6
4E11 HYD. CONTROL VALVE POPPETS, MAIN-HYDRO........... 70 - 22 8E13 HYDRAULIC UPPER HOSES - SIDEHILL .......................... 150 - 19
4E8 HYD. CONTROL VALVE SPRINGS, MAIN-HYDRO. .......... 70 - 19 8E13 HYDRAULIC UPPER LINES - SIDEHILL ............................ 150 - 19
4E11 HYD. CONTROL VALVE SPRINGS, MAIN-HYDRO. .......... 70 - 22 3F15 HYDRO. DR. CENTER SECTION (EATON) ........................ 50 - 106
3H6 HYD. LINES AND HOSES (FOUR-WHEEL DR.) 3E3 HYDRO. DR. CONTROL CABLE MOUNTING
(EATON) ............................................................................ 50 - 153 (SUNDSTRAND AND EATON) ........................................ 50 - 68
3H5 HYD. LINES AND HOSES (FOUR-WHEEL DRIVE) 3F11 HYDRO. DR. DISPLACEMENT CONTROL VALVE
(SUNDSTRAND)................................................................ 50 - 151 (EATON) ............................................................................ 50 - 102
10-18 6620 COMBINE PC1666 (18-APR-00)
PN=18
 1A20 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

3G6 HYDRO. DR. LOWER OIL LINES AND HOSES ................ 50 - 124 3F25 HYDROSTATIC DRIVE OIL RESERVOIR MOUNTING ...... 50 - 117
3E13 HYDRO. DR. PUMP BEARING (SUNDSTRAND)................ 50 - 79 3E13 HYDROSTATIC DRIVE PUMP FRONT COVER
3E23 HYDRO. DR. PUMP BEARINGS (SUNDSTRAND) ............ 50 - 89 (SUNDSTRAND)................................................................ 50 - 79
3E17 HYDRO. DR. PUMP CYL. BLOCK (SUNDSTRAND) .......... 50 - 83 3E14 HYDROSTATIC DRIVE PUMP FRONT COVER
3E18 HYDRO. DR. PUMP CYL. BLOCK (SUNDSTRAND) .......... 50 - 84 (SUNDSTRAND)................................................................ 50 - 80
3E13 HYDRO. DR. PUMP SEAL (SUNDSTRAND) ...................... 50 - 79 3E17 HYDROSTATIC DRIVE PUMP HOUSING
3F4 HYDRO. DR. PUMP SERVO PISTON ASSEMBLIES (SUNDSTRAND)................................................................ 50 - 83
(EATON) ............................................................................ 50 - 95 3E25 HYDROSTATIC DRIVE PUMP HOUSING KIT .................... 50 - 91
3F2 HYDRO. DR. PUMP SERVO PISTON ASSEMBLIES 3E22 HYDROSTATIC DRIVE PUMP SWASHPLATE.................... 50 - 88
(SUNDSTRAND)................................................................ 50 - 93 4H4 HYDROSTATIC DRIVE REEL HYDRAULIC PUMP ............ 70 - 91
3F3 HYDRO. DR. PUMP SERVO PISTON ASSEMBLIES 3E25 HYDROSTATIC DRIVE SHAFT KIT .................................... 50 - 91
(SUNDSTRAND)................................................................ 50 - 94 3E5 HYDROSTATIC DRIVE UNIT................................................ 50 - 71
3E17 HYDRO. DR. PUMP SHAFT (SUNDSTRAND) .................... 50 - 83 3E6 HYDROSTATIC DRIVE UNIT................................................ 50 - 72
3E23 HYDRO. DR. PUMP SWASHPLATE (SUNDSTRAND) ...... 50 - 89 3E5 HYDROSTATIC DRIVE UNIT, SHEAVES ............................ 50 - 71
3E23 HYDRO. DR. PUMP TRUNNIONS (SUNDSTRAND) .......... 50 - 89 3E6 HYDROSTATIC DRIVE UNIT, SHEAVES ............................ 50 - 72
3D24 HYDRO. DRIVE CONTROL CABLE AND LEVER .............. 50 - 65 3E5 HYDROSTATIC DRIVE UNIT, SUPPORTS ........................ 50 - 71
3E2 HYDRO. DRIVE CONTROL CABLE MOUNTING ................ 50 - 67 3E6 HYDROSTATIC DRIVE UNIT, SUPPORTS ........................ 50 - 72
3F6 HYDRO. DRIVE DISPLACEMENT CONTROL VALVE 3G2 HYDROSTATIC DRIVE UPPER OIL LINES ........................ 50 - 120
(SUNDSTRAND)................................................................ 50 - 97 3G3 HYDROSTATIC DRIVE UPPER OIL LINES ........................ 50 - 121
3F7 HYDRO. DRIVE DISPLACEMENT CONTROL VALVE 8F16 HYDROSTATIC GROUND DRIVE BELTS .......................... 170 - 4
(SUNDSTRAND)................................................................ 50 - 98 8F16 HYDROSTATIC GROUND DRIVE SHEAVES .................... 170 - 4
3F9 HYDRO. DRIVE DISPLACEMENT CONTROL VALVE
(SUNDSTRAND)................................................................ 50 - 100
3E20 HYDRO. DRIVE PUMP CYL. BLOCK (EATON) .................. 50 - 86 I
3F1 HYDRO. DRIVE PUMP CYLINDER BLOCK KIT
(EATON) ............................................................................ 50 - 92 6E20 IDLER ARM,FDR.HSE.LOWER BELT TGHTNR-SH............ 110 - 87
3E15 HYDRO. DRIVE PUMP FRONT COVER(EATON) .............. 50 - 81 7D15 IDLER, BEATER .................................................................... 120 - 56
3E20 HYDRO. DRIVE PUMP HOUSING (EATON) ...................... 50 - 86 7D17 IDLER, BEATER .................................................................... 120 - 58
3E18 HYDRO. DRIVE PUMP HOUSING (SUNDSTRAND) .......... 50 - 84 7G19 IDLER, CLEAN GRAIN ELEVATOR .................................... 120 - 137
3F1 HYDRO. DRIVE PUMP HOUSING KIT (EATON) ................ 50 - 92 3G12 IDLER, CRAWLER ................................................................ 50 - 131
3E20 HYDRO. DRIVE PUMP SHAFT (EATON) ............................ 50 - 86 8D18 IDLER, DECLUTCHING ........................................................ 140 - 19
3E18 HYDRO. DRIVE PUMP SHAFT (SUNDSTRAND) .............. 50 - 84 6F17 IDLER, DRIVE, FEEDER CONVEYOR-SH .......................... 110 - 110
3E24 HYDRO. DRIVE PUMP SWASHPLATE (EATON) .............. 50 - 90 7D1 IDLER, DUAL-RANGE CYLINDER DRIVE
3E24 HYDRO. DRIVE PUMP,SWASHPLATE,BEARINGS, TIGHTENER ...................................................................... 120 - 40
AND TRUNNIONS (EATON) ............................................ 50 - 90 6C4 IDLER, FEEDER CONVEYOR DRIVE (FIXED) .................. 110 - 17
3F1 HYDRO. DRIVE SHAFT KIT (EATON) ................................ 50 - 92 8F24 IDLER, FEEDER HOUSE (LONG)........................................ 170 - 12
3D19 HYDRO.DR.-PROPULSION DR.CTRSHAFT SHEAVE........ 50 - 59 8D19 IDLER, FEEDER HOUSE DRIVE ........................................ 140 - 21
3F13 HYDRO.DR.DISPLACEMENT CONTROL HANDLE 8G17 IDLER, PRIMARY COUNTERSHAFT .................................. 170 - 32
(SUNDSTRAND)................................................................ 50 - 104 8G18 IDLER, SECONDARY COUNTERSHAFT ............................ 170 - 33
3F13 HYDRO.DR.DISPLACEMENT CTL.VALVE GASKET 8D16 IDLER, SECONDARY COUNTERSHAFT DRIVE ................ 140 - 17
(SUNDSTRAND)................................................................ 50 - 104 7F9 IDLER, SHOE GRAIN SUPPLY AUGERS .......................... 120 - 101
3F13 HYDRO.DR.DISPLACEMENT CTL.VALVE ORIFICE 7E19 IDLER, STRAW CHOPPER DRIVE...................................... 120 - 85
(SUNDSTRAND)................................................................ 50 - 104 6C13 IDLER,MID.,FDR.HSE.,L.H.,VAR.DR.-SH ............................ 110 - 26
3E22 HYDRO.DR.PUMP SWASHPLATE,BRGS,TRUNNIONS .... 50 - 88 6C12 IDLER,MIDDLE,FDR.HSE.,L.H.(VARIABLE DR.) ................ 110 - 25
4H15 HYDROSTATIC DR. REEL FLOW CONTROL VALVE........ 70 - 103 8G1 IDLERS, FEEDER HOUSE (REG. FIXED) .......................... 170 - 14
3D21 HYDROSTATIC DR.BELT TENSIONING MECHANISM ...... 50 - 61 8G2 IDLERS, FEEDER HOUSE (SIDEHILL)................................ 170 - 15
4H14 HYDROSTATIC DR.REEL HYDRAULIC PUMP MTG. ........ 70 - 102 8F19 IDLERS, FEEDER HOUSE (VARIABLE DRIVE) ................ 170 - 7
3F14 HYDROSTATIC DRIVE CENTER SECTION 8F25 IDLERS, FEEDER HOUSE DRIVE (LONG RICE) .............. 170 - 13
(SUNDSTRAND)................................................................ 50 - 105 6C14 IDLERS, FEEDER HOUSE MIDDLE BELT.......................... 110 - 27
3E9 HYDROSTATIC DRIVE CHARGE PUMP ............................ 50 - 75 8G3 IDLERS, FEEDERHOUSE (REG FIXED LESS
3E11 HYDROSTATIC DRIVE CHARGE PUMP MOUNTING........ 50 - 77 REVERSER) ...................................................................... 170 - 16
3E12 HYDROSTATIC DRIVE CHARGE PUMP MOUNTING 8G7 IDLERS, STRAW CHOPPER................................................ 170 - 21
(EATON) ............................................................................ 50 - 78 7H7 IDLERS,DIP AND POUR ELEVATOR UPPER CHAIN........ 120 - 151
3E25 HYDROSTATIC DRIVE CYLINDER BLOCK KIT ................ 50 - 91 2D2 IGNITION SWITCH KEY ...................................................... 40 - 43
3G1 HYDROSTATIC DRIVE HOSES AND FITTINGS ................ 50 - 118 5E14 INDICATOR LIGHT ASSEMBLY, HI PRESSURE................ 90 - 58
3G4 HYDROSTATIC DRIVE LOWER OIL HOSES 1G24 INJECTION NOZZLE, FUEL (DH) ........................................ 30 - 34
(SUNDSTRAND)................................................................ 50 - 122 1I1 INJECTION NOZZLE, FUEL (TH) ........................................ 30 - 64
3G4 HYDROSTATIC DRIVE LOWER OIL LINES 3H15 INNER COVER ...................................................................... 50 - 164
(SUNDSTRAND)................................................................ 50 - 122 5D16 INNER ROOF ........................................................................ 90 - 33
3G9 HYDROSTATIC DRIVE LUBE BANK SYSTEM .................. 50 - 127 5D16 INNER ROOF AND COVERS .............................................. 90 - 33
3F22 HYDROSTATIC DRIVE MOTOR (EATON) .......................... 50 - 114 8C4 INNER UNLOADING AUGER COVERS .............................. 130 - 19
3F18 HYDROSTATIC DRIVE MOTOR (SUNDSTRAND).............. 50 - 110 3D6 INPUT HOUSING, POSI-TORQ DRIVE................................ 50 - 43
3F20 HYDROSTATIC DRIVE MOTOR (SUNDSTRAND).............. 50 - 112 3C8 INPUT SHAFT, TRANSMISSION.......................................... 50 - 19
3E8 HYDROSTATIC DRIVE MOTOR COUPLER........................ 50 - 74 1B22 INSTALLATION KIT, SHORT BLOCK (DH) ........................ 20 - 10
3E8 HYDROSTATIC DRIVE MOTOR MOUNTING...................... 50 - 74 1C7 INSTALLATION KIT, SHORT BLOCK (TH 01) .................... 20 - 20
3G1 HYDROSTATIC DRIVE OIL COOLER ................................ 50 - 118 5D9 INSTRUMENT PANEL .......................................................... 90 - 25
3F25 HYDROSTATIC DRIVE OIL RESERVOIR............................ 50 - 117 2D2 INSTRUMENT PANEL ACCESSORIES .............................. 40 - 43
6620 COMBINE PC1666 (18-APR-00) 10-19
PN=19
John Deere 6620 Parts Catalog
Full download: http://manualplace.com/download/john-deere-6620-parts-catalog/
1A21 6620 COMBINE
ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

2D5 INSTRUMENT PANEL GAUGES.......................................... 40 - 47 1C24 KIT, PISTON-LINER (TH)...................................................... 20 - 37
2C21 INSTRUMENT PANEL WIRING HARNESS (AHHC) .......... 40 - 38 2E4 KIT, RADIO ............................................................................ 40 - 71
2C23 INSTRUMENT PANEL, WIRING HARNESS 2E5 KIT, RADIO EXTERNAL ANTENNA .................................... 40 - 73
(DIAL-A-MATIC) ................................................................ 40 - 40 5D24 KIT, SEAL .............................................................................. 90 - 41
8G24 INSTRUMENTAL PANEL DECALS ...................................... 170 - 39 4D23 KIT, SEAL, MAIN HYD. PUMP ............................................ 70 - 10
5C23 INSULATION, SEAT CONSOLE .......................................... 90 - 13 4D22 KIT, SEAL, MAIN HYDRAULIC PUMP ................................ 70 - 9
1E19 INTAKE MANIFOLD (DH)...................................................... 20 - 83 4H25 KIT, SEAL,FDR.HSE.HYD.CYL.VARIABLE DR-SH.............. 70 - 113
1E20 INTAKE MANIFOLD (TH) ...................................................... 20 - 84 4F24 KIT, SECONDARY CONTROL VALVE ................................ 70 - 61
1E19 INTAKE MANIFOLD GASKET (DH) .................................... 20 - 83 4G2 KIT, SECONDARY CONTROL VALVE ................................ 70 - 63
1E20 INTAKE MANIFOLD GASKET (TH)...................................... 20 - 84 4G4 KIT, SECONDARY CONTROL VALVE ................................ 70 - 65
1D9 INTAKE VALVES (DH) .......................................................... 20 - 48 2E19 KIT, STARTER SOLENOID COVER (DH)............................ 40 - 87
1D11 INTAKE VALVES (TH) .......................................................... 20 - 50 4C13 KIT, STEERING CYLINDER.................................................. 60 - 29
4C15 KIT, STEERING CYLINDER.................................................. 60 - 31
4C4 KIT, STEERING PUMP INPUT SHAFT SEAL .................... 60 - 19
J 4C2 KIT, STEERING PUMP SEAL .............................................. 60 - 17
5D25 KIT, SUPER HEAT ................................................................ 90 - 42
6E13 JAW, FEEDER HOUSE LOWER SHAFT-SH ...................... 110 - 79 2D18 KIT, TAPE PLAYER .............................................................. 40 - 61
2E21 KIT, TERMINAL AND WIRING ............................................ 40 - 90
4G19 KIT, UNLOADING AUGER SWING HYD. CYLINDER ........ 70 - 80
K 4G21 KIT, UNLOADING AUGER SWING HYD. CYLINDER ........ 70 - 82
4G23 KIT, UNLOADING AUGER SWING HYD. CYLINDER ........ 70 - 84
2D2 KEY, IGNITION SWITCH ...................................................... 40 - 43 2D20 KIT,AM-FM RADIO,PUSH BUTTON,TAPE PLAYER .......... 40 - 63
4H17 KIT, ADJUSTING SCREW .................................................... 70 - 105 4I3 KIT,HEADER LIFT HYDRAULIC CYLINDER-SH ................ 70 - 117
2D24 KIT, AM RADIO, PUSH BUTTON ........................................ 40 - 67 4I5 KIT,HEADER LIFT HYDRAULIC CYLINDER-SH ................ 70 - 119
2D14 KIT, AM RADIO, PUSH BUTTON, TAPE PLAYER ............ 40 - 57 4H6 KIT,HYDROSTATIC DR.REEL HYDRAULIC PUMP ............ 70 - 93
2E2 KIT, AM-FM RADIO, PUSH BUTTON .................................. 40 - 69 4H6 KIT,HYDROSTATIC DR.REEL HYDRAULIC SHEAVE ........ 70 - 93
2D16 KIT, ANTENNA WITH CLIPS................................................ 40 - 59 4E4 KIT,MAIN HYD.PUMP-(FOUR-WHEEL DRIVE) .................. 70 - 15
4B18 KIT, BRAKE SLAVE CYLINDER .......................................... 60 - 9 8E9 KIT,MAIN VALVE BLOCK SOLENOID - SIDEHILL ............ 150 - 15
8E20 KIT, CHECK BLOCK ............................................................ 160 - 2 2D22 KIT,SPEAKERS,RADIO,TAPE PLAYER,HARNESS ............ 40 - 65
8E7 KIT, CHECK BLOCK - SIDEHILL ........................................ 150 - 12 4G18 KIT,UNLDG.AUGER SWING HYDRAULIC CYLINDER ...... 70 - 79
5E7 KIT, COMPRESSOR.............................................................. 90 - 50 3G25 KNEE AND MOTOR HOUSING (FOUR-WHEEL DR.) ........ 50 - 145
5E9 KIT, COMPRESSOR HARDWARE ...................................... 90 - 53 7E20 KNIFE AND SUPPORT, STRAW CHOPPER ...................... 120 - 86
3H3 KIT, CONTROL VALVE SOLENOID (FOUR-WHEEL 1G2 KNOB, FUEL SHUT-OFF CONTROL .................................. 30 - 8
DRIVE) .............................................................................. 50 - 148 1G3 KNOB, FUEL SHUT-OFF CONTROL .................................. 30 - 9
3I1 KIT, CONTROL VALVE SOLENOID (FOUR-WHEEL 8B20 KNOB, GRAIN TANK DOOR ................................................ 130 - 11
DRIVE) .............................................................................. 50 - 177 5E16 KNOB, HEATER CONTROL ................................................ 90 - 60
8E25 KIT, DROP RATE VALVE .................................................... 160 - 9 2D12 KNOB, PUSH BUUTON RADIO .......................................... 40 - 55
2F1 KIT, ELECTRICAL CONNECTOR SERVICE........................ 40 - 92 2E4 KNOB, RADIO ...................................................................... 40 - 71
4F7 KIT, FLOW CONTROL PLUG .............................................. 70 - 43 4H2 KNOB, REEL SPEED............................................................ 70 - 89
1H13 KIT, FUEL FILTER ................................................................ 30 - 49 2D12 KNOB, TAPE PLAYER.......................................................... 40 - 55
4I4 KIT, HEADER LIFT HYDRAULIC CYLINDER...................... 70 - 118 4F15 KNOB, VARIABLE CYLINDER CONTROL .......................... 70 - 51
3F1 KIT, HYDRO. DRIVE PUMP CYLINDER BLOCK
(EATON) ............................................................................ 50 - 92
3F1 KIT, HYDRO. DRIVE PUMP HOUSING (EATON) .............. 50 - 92 L
3F1 KIT, HYDRO. DRIVE PUMP SHAFT (EATON) .................... 50 - 92
4H16 KIT, HYDRO.DRIVE REEL FLOW CONTROL VALVE ........ 70 - 104 5C13 LADDER, OPERATOR’S PLATFORM .................................. 90 - 3
3E10 KIT, HYDROSTATIC DRIVE CHARGE PUMP .................... 50 - 76 5C15 LADDER, OPERATOR’S PLATFORM (TRACKS)................ 90 - 5
3E25 KIT, HYDROSTATIC DRIVE CYLINDER BLOCK ................ 50 - 91 5B20 LADDER, REAR .................................................................... 80 - 11
3E25 KIT, HYDROSTATIC DRIVE PUMP HOUSING .................. 50 - 91 5C19 LANDING SUPPORTS .......................................................... 90 - 9
3E25 KIT, HYDROSTATIC DRIVE SHAFT .................................... 50 - 91 5C13 LANDING, OPERATOR’S PLATFORM ................................ 90 - 3
8E2 KIT, LEVELING CYLINDER (SH) ........................................ 150 - 7 5C15 LANDING, OPERATOR’S PLATFORM (TRACKS) .............. 90 - 5
8E4 KIT, LEVELING CYLINDER VALVE BLOCK-SH ................ 150 - 9 7G11 LATCH, CLEAN GRAIN ELEVATOR.................................... 120 - 129
4E17 KIT, MAIN HYD. CONTROL VALVE (HYDRO-SH) ............ 70 - 28 6F12 LATCH, FEEDER HOUSE LEFT-HAND SHIELD-SH .......... 110 - 104
4F4 KIT, MAIN HYD. CONTROL VALVE (POSI-TORQ) ............ 70 - 40 6F10 LATCH, FEEDER HOUSE RIGHT-HAND SHIELD-SH ........ 110 - 102
4F5 KIT, MAIN HYD. CONTROL VALVE (POSI-TORQ) ............ 70 - 41 8B20 LATCH, GRAIN TANK DOOR .............................................. 130 - 11
4E5 KIT, MAIN HYD. PUMP BACK PLATE ................................ 70 - 16 6E5 LATCH,FEEDER HOUSE BOTTOM SHEETS-SH .............. 110 - 71
4E5 KIT, MAIN HYD. PUMP RELIEF VALVE.............................. 70 - 16 2C12 LEFT-HAND LIGHTS WIRING HARNESS .......................... 40 - 29
4F3 KIT, MAIN HYD.CONTROL VALVE-POSI-TORQ ................ 70 - 39 8E16 LEVELING CONTROL BOX .................................................. 150 - 23
4E13 KIT, MAIN HYDRAULIC CONTROL VALVE ........................ 70 - 24 8D25 LEVELING CYLINDER (SH).................................................. 150 - 5
4E15 KIT, MAIN HYDRAULIC CONTROL VALVE ........................ 70 - 26 8E5 LEVELING CYLINDER PIVOT BRACKET-SH .................... 150 - 10
4E16 KIT, MAIN HYDRAULIC CONTROL VALVE ........................ 70 - 27 8D23 LEVELING CYLINDER-SH .................................................... 150 - 3
4E18 KIT, MAIN HYDRAULIC CONTROL VALVE ........................ 70 - 29 8E17 LEVELING SWITCHES AND FUSE,SIDEHILL .................... 150 - 24
4E19 KIT, MAIN HYDRAULIC CONTROL VALVE ........................ 70 - 30 8E6 LEVELING VALVE - SIDEHILL ............................................ 150 - 11
4E2 KIT, MAIN HYDRAULIC PUMP ............................................ 70 - 13 3B16 LEVER AND CAM, GEARSHIFT (POSI-TORQ) .................. 50 - 2
8E22 KIT, MAIN VALVE BLOCK SOLENOID................................ 160 - 5 3B17 LEVER ASSEMBLY,GEARSHIFT-HYDROSTATIC DR. ...... 50 - 3
5E1 KIT, O-RING - AIR CONDITIONING .................................... 90 - 43 7G12 LEVER, CLEAN GRAIN ELEVATOR HOUSING.................. 120 - 130
1C21 KIT, PISTON LINER (TH)...................................................... 20 - 34 4G25 LEVER, HYDRAULIC REEL LIFT CONTROL...................... 70 - 87
10-20 6620 COMBINE PC1666 (18-APR-00)
PN=20
This is the cut pages sample. Download all 1265 page(s) at: ManualPlace.com