Technical Datasheet

Kempower Station Charger C800

The Kempower Station Charger is the all-in-one DC charging

solution with dynamic power management.

The Station Charger is a powerful all-in-one A double cabinet Station Charger can have up
solution for electric vehicle fast charging sites. to eight 50 kW power modules, providing a
Utilizing Kempower's user-friendly cable system, maximum charging power of up to 400 kW.
the Station Charger can have one or two DC
charging outputs. An optional AC charging With dynamic power management, the
socket is also available. By utilizing individual 25 available charging power of all power modules
kW power channels in the installed power is automatically distributed to all connected
modules, the Station Charger’s unique dynamic charging outputs according to the requests of
power management harnesses the full potential the electric vehicles.
of on-demand power routing. This enables
significant cost savings in the installed charging
hardware and grid connection while optimizing
the charging experience.

Power range Number of charging outputs

Up to 400 kW 1–2
1/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023
 1 Lifting lugs
2 WiFi/cellular/GPS antenna
3 Air outlet
4 Air inlet
5 Charging cable support system
6 Power module (1–4 pcs/cabinet)
7 Charging status indication LEDs
8 7” touch screen display
9 RFID reader (ISO 14443A)
10 Vehicle connectors
11 Power distribution module
12 Control module
13 Main switch
14 AC supply cable entry
15 AC charging socket

Advanced cable support Scalability with add-on Reduced installation cost

system for premium user power modules with all-in-one charging
experience solution

Possibility to add up to 2 Lockable door for safety and Advanced charging control
external Kempower Satellites easy access and customization with
Kempower ChargEye

2/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023
Product code interpretation
C801•P160•NC•5•C•S•D2•C0 Kempower Station Charger C800 single cabinet • 200 kW charging
power • 1 x CCS2 vehicle connector • charging cable length 5 m •
nominal charging cable current 200 A • standard user interface •
up to 2 dynamic outputs • unbranded

Item Code Description

Product type C801 Kempower Station Charger C800 single cabinet
C802 Kempower Station Charger C800 double cabinet

Charging power
[1] P160 200 kW (4 modules)
P320 400 kW (8 modules)
N When in front of the vehicle connector type, indicates that there is only
one connector
Vehicle connector type C CCS2
CC 2 X CCS2
CCA 2 X CCS2 & Type 2 AC
CD CCS2 & CHAdeMO
CDA CCS2 & CHAdeMO & Type 2 AC
Charging cable length 5 5m
7 7m
Nominal charging cable B 125 A (CHAdeMO)
current
C 200 A (CCS2)
D 250 A (CCS2)
E 300 A/500 A
[2]
(CCS2)
User interface and S Standard user interface
payment
P Payter P66: Only contactless payments, no strong customer
authentication (SCA) possibility
Power distribution D2 Up to 2 dynamic outputs
modules
Branding options C0 Unbranded: roof and base in black color, no stickers
Cn Branded: number (n) indicates branding, e.g. C8

[1] Standard operation. See Power performance table for details.

[2] With 300 A charging cables:
500 A (max. 10 min) in +25 ˚C. Requires at least 3 output terminals and a specific hardware configuration.
375 A continuous in +25 ˚C. Requires at least 2 output terminals and a specific hardware configuration.

3/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023
General electrical specifications

Input voltage 380…480 VAC +6%/-10%

Input frequency 50…60 Hz
Output voltage 200...920 VDC
AC charging level 2 240 V phase voltage (3 phase supply)
Power factor at full load 0.92
Efficiency at full load 94%
Idle power 20 VA
Standby power C801: 50 W
C802: 180 W
Overvoltage category III
Icc 35 kA
Network type TN-S, TN-C, TN-C-S, TT

Environmental specifications

Operating temperature −30…+50 °C

Current derating Charging current decreases 1.5% for every 1 °C rise in temperature
above +40 °C
Maximum altitude without derating 2000 m
Altitude derating Charging current decreases 1.4% for every 100 m rise above 2000 m
Operational noise level Wall side: < 57 dB at 1 m distance
Door side: < 62 dB at 1 m distance
Storage temperature −40…+60 °C
Ambient air humidity < 95% relative humidity
Enclosure rating IP54, IK10 (IK09 for the payment terminal)

4/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023
Connections and protocols

WiFi 802.11 b/g/n (2.4/5 GHz)

Cellular/GPS LTE-FDD, LTE-TDD, WCDMA, GSM
Ethernet RJ45, IEEE 802.3/802.3u
OCPP 1.6j/2.0.1
Connectivity Kempower ChargEye solution
CCS2 DIN 70121:2012, ISO 15118:2013, ISO 15118:2010
CHAdeMO 0.9/1.0
Type 2 AC IEC 61851-1
Authentication methods RFID: ISO 14443A, ISO 15693, ISO 14443B (STM SRI512)
Customer backend via OCPP
Payment terminal
AutoCharge
ISO 15118-2 Plug & Charge

Electrical protections

Over/undervoltage
Surge protection
Short circuit
Overload protection
Earth leakage current monitoring
Device overtemperature

Power performance

Standard operation Continuous operation

Product Number Number of Charging Input Input Charging Input Input
type of power independent power at current current power at current current
modules AC supply 667 VDC per per 667 VDC per per
cables* supply supply supply supply
cable at cable at cable at cable at
400 V** 480 V 400 V** 480 V
1 1 50 kW 91 A 76 A 40 kW 73 A 61 A
2 1 100 kW 181 A 151 A 80 kW 145 A 121 A
C801
3 1 150 kW 272 A 227 A 120 kW 218 A 182 A
4 1 200 kW 362 A 302 A 160 kW 290 A 242 A
5 2 250 kW 91 A 76 A 200 kW 73 A 61 A
6 2 300 kW 181 A 151 A 240 kW 145 A 121 A
C802
7 2 350 kW 272 A 227 A 280 kW 218 A 182 A
8 2 400 kW 362 A 302 A 320 kW 290 A 242 A

* Each cabinet has a dedicated supply cable

** Add 32 A if Type 2 option is included

5/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023
Figure 1. Power curve (standard operation)

Figure 2. Power curve (continuous operation)

6/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023
Product codes

Product code Vehicle connector Max. charging current Max. DC charging power
at 800 VDC*
C801•CC•x•C• 2 x CCS2 2 x 200 A 2 x 160 kW
C801•CC•x•D• 2 x CCS2 2 x 250 A 2 x 200 kW
C801•CC•x•E• 2 x CCS2 2 x 300/500 A** 2 x 200 kW
C801•CD•x•CB• CCS2 & CHAdeMO 200 A & 125 A 160 kW & 100 kW
C801•CD•x•DB• CCS2 & CHAdeMO 250 A & 125 A 200 kW & 100 kW
C801•CD•x•EB• CCS2 & CHAdeMO 300/500 A** & 125 A 200 kW & 100 kW
C801•CCA•x•C• 2 x CCS2 2 x 200 A 2 x 160 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C801•CCA•x•D• 2 x CCS2 2 x 250 A 2 x 200 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C801•CCA•x•E• 2 x CCS2 2 x 300/500 A** 2 x 200 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C801•CDA•x•CB• CCS2 & CHAdeMO 200 A & 125 A 160 kW & 100 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C801•CDA•x•DB• CCS2 & CHAdeMO 250 A & 125 A 200 kW & 100 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C801•CDA•x•EB• CCS2 & CHAdeMO 300/500 A** & 125 A 200 kW & 100 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW

7/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023
 Product code Vehicle connector Max. charging current Max. DC charging power
at 800 VDC*
C802•CC•x•C• 2 x CCS2 2 x 200 A 2 x 160 kW
C802•CC•x•D• 2 x CCS2 2 x 250 A 2 x 200 kW
C802•CC•x•E• 2 x CCS2 2 x 300/500 A** 2 x 240/400 kW
C802•CD•x•CB• CCS2 & CHAdeMO 200 A & 125 A 160 kW & 100 kW
C802•CD•x•DB• CCS2 & CHAdeMO 250 A & 125 A 200 kW & 100 kW
C802•CD•x•EB• CCS2 & CHAdeMO 300/500 A** & 125 A 240/400 kW & 100 kW
C802•CCA•x•C• 2 x CCS2 2 x 200 A 2 x 160 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C802•CCA•x•D• 2 x CCS2 2 x 250 A 2 x 200 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C802•CCA•x•E• 2 x CCS2 2 x 300/500 A** 2 x 240/400 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C802•CDA•x•CB• CCS2 & CHAdeMO 200 A & 125 A 160 kW & 100 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C802•CDA•x•DB• CCS2 & CHAdeMO 250 A & 125 A 200 kW & 100 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW
C802•CDA•x•EB• CCS2 & CHAdeMO 300/500 A** & 125 A 240/400 kW & 100 kW
& Type 2 AC & AC 3 phases 32 A & AC 22 kW

* Depends on the number of installed power modules

** With 300 A charging cables:
500 A (max. 10 min) in +25 ˚C. Requires at least 3 output terminals and a specific hardware configuration.
375 A continuous in +25 ˚C. Requires at least 2 output terminals and a specific hardware configuration.

Note: Depending on the required cable length, replace x in the product code with 5 or 7, e.g. C802•CD•5
5•CB for a 5 m cable.

Compliance to standards

IEC 61851-1
IEC 61851-23
IEC 61851-21-2

Options

Customized branding Branding options, such as custom colors and stickers

Contact Kempower for availability, pricing, and minimum order quantity

Mechanical dimensions

Size (W x H x D) Weight
C801: 651 x 2395 x 841 mm Maximum 525 kg
C802: 1250 x 2395 x 841 mm Maximum 925 kg

8/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023
 1 2395 mm 3 651 mm 5 839 mm 7 1388 mm 9 841 mm
2 645 mm 4 788 mm 6 826 mm 8 1250 mm

9/9
KEMPOWER STATION CHARGER C800 EN REV. 2.50 06-2023 SUBJECT TO CHANGE WITHOUT NOTICE © KEMPOWER 2023