Material Safety Data Sheet
MSDS Name: Lithium-ion Polymer Cell
Model: Rectangular Type Cell_
Document No: WB.MSDS.2023.019
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product name: Lithium-ion Polymer Cell
Company Identification: Zhangzhou Aucopo Energy Technology Co.,ltd.
Address: No.198, Highway 319, Jingcheng, Nanjing, Zhangzhou, Fujian Province, PR. China
Model: 4960122/4050mAh/3.7V
Power:.14.99W
Eenergy: 14.99Wh
Energy density:417.78Wh/L
Zhangzhou Aucopo Energy Technology Co.,ltd. Call: 0596-7666111
2. COMPOSITION / INFORMATION ON INGREDIENTS
The Lithium-ion battery is hermetically sealed; among its components, the following ones could potentially be
hazardous upon release.
Ingredient Concentration CAS No. EINECS No.
Lithium Cobaltite(LiCoO2) 26～30% 12190-79-3 235-362-0
Graphite Power 11～15% 7440-44-0 231-153-3
Copper Foil 16～20% 7440-50-8 231-259-6
Aluminum Foil 5～6% 7429-90-5 231-072-3
LiPF6 4～5% 21324-40-3 244-334-7
Ethylene glycol carbonate 11～15% 96-49-1 202-510-0
PP or PE 16～20% / /
3. HAZARDS IDENTIFICATION
Classification: Carcinogenic Category 3R40, Xn, sensitizing R43
Most important hazards: There’s limited evidence of a carcinogenic effect. There are possible risks of irreversible
effects. It may cause sensitization by skin contact.
Further information: The sealed lithium-ion battery is not hazardous when used according to recommendations.
Under normal conditions of use, the integrity of the battery’s package and security vent are maintained. The ingredients
are not expected to pose a significant risk to man or the environment. The classification above is based on the contents
being considered as a preparation in accordance with Directive 1999/45/EC.
4. FIRST AID MEASURES
General advice
Show this safety data sheet to the doctor in attendance.
The information below refers to exposure to the ingredients.
Inhalation
Immediate medical attention is required. Move to fresh air. If symptoms persist, call a physician.
Skin contact
Immediate medical attention is required. Wash off immediately with plenty of water for at least 15 minutes. Remove
and wash contaminated clothing before re-use. If skin irritation persists, call a physician.
Eye contact
Immediate medical attention is required. Remove contact lenses. Rinse immediately with plenty of water for at least 15
minutes.
Ingestion
Immediate medical attention is required. Gently wipe or rinse the inside of the mouth with water. Give small amounts
of water to drink. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a physician or
Poison Control Centre immediately.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Foam dry powder, carbon dioxide (CO2), sand.
Extinguishing media which must not be used for safety reasons
Water, water spray
Specific hazards
There’s risk of receptacle bursting.
Special protective equipment for firefighters
In the event of fire, wear self contained breathing apparatus. Wear personal protective equipment.
Hazardous decomposition products
Lithium compounds, carbon oxides, hydrogen fluoride
6. ACCIDENTAL RELEASE MEASURES
The information below refers to exposure to the ingredients.
Personal precautions
Use personal protective equipment. Avoid contact with skin and eyes.
Environmental precautions
Prevent further leakage or spillage if safe to do so.
Do not allow material to contaminate ground water system.
To avoid risks to man and the environment, comply with the instructions for use.
Methods for cleaning up
Pick up and transfer to properly labeled containers. Dispose of in accordance with local regulations.
7. HANDLING AND STORAGE
Handling
Technical measures/Precautions
No special technical protective measures required.
Safe handling advice
Avoid contact with skin and eyes.
Use personal protective equipment.
Follow the instructions for use issued by the producer.
Storage
Technical measures/Storage conditions
Keep in a dry, cool and well-ventilated place, preferably in the temperature range of +5 to +25°C at 65%(+-5%) relative
humidity.
Keep away from heat and sources of ignition.
Keep away from water.
Ignition point exceeds 100 degrees
Ensure battery terminals are protected during storage.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Occupational exposure controls
Engineering measures
Ensure adequate ventilation, especially in confined areas.
Personal protective equipment
Not required under normal use.
The information below refers to exposure to the ingredients.
Respiratory protection
Effective dust mask.
Hand protection
Neoprene gloves (EN 374).
Eye protection
Safety glasses with side-shields conforming to EN166
Skin and body protection
Boots, apron, long sleeved clothing.
Hygiene measures
General industrial hygiene practice.
Environmental exposure controls
The information below refers to exposure to the ingredients
Prevent product from entering drains.
Do not allow material to contaminate ground water system.
9. PHYSICAL AND CHEMICAL PROPERTIES // FLASH POINT > 100'C
General Information
Form battery (sealed unit) Color: silvery Odor: odorless
Important Health Safety and Environmental Information
Not applicable
10. STABILITY AND REACTIVITY
Stability
Stable under normal conditions.
Hazardous polymerization
Hazardous polymerization does not occur.
Conditions to avoid
Keep away from heat and sources of ignition.
Materials to avoid
Exposure to moisture.
Hazardous decomposition products
Lithium compounds, carbon oxides, hydrogen fluoride
11. TOXICOLOGICAL INFORMATION
The information below refers to exposure to the ingredients.
Local effects
May cause eye/skin irritation. May cause irritation of respiratory tract.
Long term toxicity
No data available. Avoid repeated exposure.
Specific effects
May cause sensitization by inhalation and skin contact. Limited evidence of a carcinogenic effect.
12. ECOLOGICAL INFORMATION
If used as directed and if the integrity of the battery’s package and security vent are maintained, the ingredients are
not expected to pose a significant risk to the environment.
Mobility
No data available.
Persistence and degradability
Not readily biodegradable.
Eco-toxicity effects
No data available.
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused products
Dispose of in accordance with local regulations. It must undergo special treatment, e.g. at suitable disposal site, to
comply with local regulations. It should not be released into the environment.
Contaminated packaging
Not applicable.
Further information
Never incinerate Li-Ion batteries.
Never dispose Li-Ion batteries as landfill.
14. TRANSPORT INFORMATION
According to the classification of lithium cells and batteries of UN Nos.3480.
According to the packaging instruction 966 section Ⅱ of IATA DGR 64th Edition for transportation.
According to the special provision 188 of IMDG of the 《Recommendations On the Transport Of Dangerous
Goods-Model Regulations》.The products are not subjects to dangerous goods.
More information concerning shipping, testing, marking and packing can be obtained from Label master at
http://www.labelmaster.com.
Separate Lithium-ion batteries when shipping to prevent short-circuiting. They should be packed in strong packaging
for support during transport. Take it in a cargo of them without failing, dropping, and breakage. Prevent collapse of
cargo piles and wet by rain.
Transport Fashion: By sea，by air.
15. REGULATORY INFORMATION
Law Information
《Dangerous Goods Regulation》
《Recommendations on the Transport of Dangerous Goods Model Regulations》
《International Maritime Dangerous Goods》
《Technical Instructions for the Safe Transport of Dangerous Goods》
《Classification and code of Dangerous Goods》
《Occupational Safety and Health Act》(OSHA)
《Toxic Substances Control Act》(TSCA)
《Consumer Product Safety Act》(CPSA)
《Federal Environmental Pollution Control Act》(FEPCA)
《The Oil Pollution Act》(OPA)
《Superfund Amendments and Reauthorization Act Title III (302/311/312/313)》(SARA)
《Resource Conservation and Recovery Act》(RCRA)
《Safety Drinking Water Act》(CWA)
《California Proposition 65》
《Code of Federal Regulations》(CFR)
In accordance with all Federal, State and Local laws.
16. ADDITIONAL INFORMATION
The above information is based on the data of which we are aware and is believed to be correct as of the
data hereof. Since this information may be applied under conditions beyond our control and with which
may be unfamiliar and since data made available subsequent to the data hereof may suggest
modifications of the information, we do not assume and responsibility for the results of its use. This
information is furnished upon condition that the person receiving it shall make his own determination of
the suitability of the material for his particular purpose.
Reported by:
Company Name:Zhangzhou Aucopo Energy Technology Co.,ltd. Date: 2023-8-29
