Desiccant dehumidifier TTR 8200

Standard equipment Additional equipment option

n Housing made of powder-coated, galvanized sheet steel n Steam heater for regeneration air (saturated steam P > 3 barg)
n Integrated G4 air filters as Z-line filters, separately for process and regeneration n Additional electrical heating for dry air
air n Integrated heat exchanger (cold/warm water) for dry air temperature control
n Filter monitoring with warning light n Boosted or additional fan for higher compression of dry air
n Rotor rotation control n Protection and transport frame, stackable
n 24 V DC control voltage n Castors for transport frame
n Potential-free signal contacts for maintenance / filter change, fault, operation n Wheels
ON / OFF
n Housing components as stainless steel version
n Terminals for hygrostat, 24 V DC
n Hygienic equipment (fans and rotor with hygienic design)
n Terminals for external switch-on/off, 24 V DC
n Weather protection equipment
n Directly driven high-performance EC fans with manual speed adjustment
integrated in the housing (no additional throttle valves required), separately for n Humidity / temperature control (signal transducer kit 4–20 mA / 0–10 V,
process and regeneration air parameterization)
n Flowmatic S, separate electronic fan speed control for process and regeneration n Electronic hygrostat HG125 with two-line LC display
air, controlled to a constant volumetric flow or pressure depending on the n Dew point sensor (-100 - +20 °Cdp / signal 4–20 mA)
process-related target value, control signal 0…10 V or 4–20 mA n Mirror-inverted module assembly – for reversed air flow direction
n Silica gel sorption rotor with internal purging sector for heat recovery and n PWIS-free model
automatically adjusting rotor seal kit
n PT 100 temperature probe
n Rotor drive system with brushless, variable-speed gear motor, toothed belt,
toothed belt pulley and belt tensioner
n Electric regeneration air heater comprising tubular heating elements, equipped
with safety temperature limiters and differential pressure switch, controlled via
semi-conductor relay(s)
n Millenium microprocessor control with four-line plain text display
n Error messages in plain text
n Energy management (temperature-dependent regeneration air heater control)
n Humidity regulation dry air (only in combination with optional moisture
measuring device and signal transducer kit 4–20 mA / 0–10 V)
n Temperature regulation dry air (only with optional temperature probe and
downstream air conditioning)
n Temperature-controlled rundown period
n Integrated control cabinet with all the equipment and supplies required for
operation complying with the TROTEC standard: emergency stop main switch,
selection switch for remote / on-site operation, indicator lights, buttons,
switching devices, fuses, wiring and terminals
n Housing prepared for mirror-inverted assembly; air direction reversal; standard
process air flow direction from left to right

Trotec GmbH Phone: +49 2452 962-400 [email protected] Local court AC Managing Directors:
Grebbener Straße 7 Fax: +49 2452 962-200 www.trotec.om HRB 1 3453 Detlef von der Lieck
52525 Heinsberg Joachim Ludwig, Alexandra Goertz
Desiccant dehumidifier TTR 8200

General technical data (at 20 ° C / 60% rh, 1013 mbar)

Dehumidification 46.2 kg/h

Air volume free-blowing 9000 m³/h

Dry air Air volume nominal 8200 m³/h

Compression 400 Pa

Air volume 1660 m³/h

Regeneration air
Compression 300 Pa

Heating 57 kW

Power input 64.5 kW

Voltage 3/PE/380 - 480 V/50 - 60 Hz

Max. current consumption (@ 3 x 400 V) 93.5 A

Recommended fusing 125 A

Weight 750 kg
1919 mm x 1110 mm x 1680
Dimensions (L x W x H)
mm

298(DN300)
295 485

C B
499(DN500)

D
A
1680
1115
100
507

507

499(DN500)

537 200 644 200 537

1100 88 1744
1110 1919

500 500 A) Prozessluft-Eintritt

processair inlet
B) Regenerationsluft-Eintritt
regen.-air inlet
C) Feuchtluft-Austritt
wetair outlet
D) Trockenluft-Austritt
dryair outlet

Platzbedarf
1000

space requirement

Subject to change without notice. All performance data refer to 1013 mbar, a density of 1.2 kg/m³ and a power supply with 3x400 V/50Hz +PE or 230V/50 Hz. For your project design we recommend to consider a safety discount of 10-20 %
for the dehumidification performance depending on the application.

Trotec GmbH Phone: +49 2452 962-400 [email protected] Local court AC Managing Directors:
Grebbener Straße 7 Fax: +49 2452 962-200 www.trotec.om HRB 1 3453 Detlef von der Lieck
52525 Heinsberg Joachim Ludwig, Alexandra Goertz