R12L Command L
No. Function Format
Setting Command
1 Set IP SERVER,8520,IP/Domain Name,Port,0#
APN,apn#
2 Set APN
APN,apn,user name, password#
3 Upload interval time svetting TIMER,Upload intervall#
4 Add Center Number CENTER,A,phone number#
5 Delete Center Number CENTER,D#
6 Set the petrol/electricity control RELAY,T#
7 Reboot RESET#
8 Set Timezone GMT,[A],[B],[C]#
9 Restore Factory Defaults FACTORY#
10 Vibration Alarm VIBRATION,Alarm level, alarm mode#
11 Overspeed Alarm SPEEDING,speed,alarm mode
POWER0#
12 Power Off Alarm
POWER1#
Query Command
1 Check position status WHERE#
Query position link
2 URL#
3 Check parameters PARAM#
4 Check status STATUS#
5 Check version VERSION#
R12L Command List
Example Description
SERVER,8520,gps.whatsgps.com,6801,0# Set the server IP and port
APN varies according to local telecom operators
Please use the first method if it doesn't request
APN,cmnet#
a password.
APN,g.claro.com.br,claro,claro#
Please use the second method if it request a
password.
Time scope：0，10-60seconds
0，indicates that the device does not upload
TIMER,10# data
10-60，device uploads data at this interval.
The default upload interval is 10 seconds.
1）The center number can control the oil cut
2）center number can receive vibration alarms,
overspeed alarm calls and text messages
CENTER,A,13500010340#
3）can only set one center number
4）Changing the center number requires re-
instruction
CENTER,D# Delete center number
T=1:Cut oil and power
T=0:Recover oil and power
1）Instruction control the start and closeness of
the relay
2）Only the center number send command is
RELAY,1#
valid
RELAY,0#
3）The device only takes effect at rest or driving
speed below 20km/h
4）If the vehicle speed exceeds 20km/h, the
equipment will reply “not allowed to cut off the
oil and electricity”
RESET# Reset the device
The value of A is E or W, which represents the
East Time Zone and the West Time Zone
respectively.
GMT,E,8,0# The value of B is from 0-12, representing the
time zone.
The value of C is 0, 15, 30, 45 means half time
zone, the default is 0.
After restoring factory Settings, users add and
FACTORY# modify
Content will be restored
Alarm level is 0-5, 0 is off alarm, 1 to 5, the lower
the number, the more sensitive
VIBRATION,2,3#
Alarm mode: 1.Phone 2. Text messages; 3.
Phone calls and text messages
The speed setting range is 60-220,if the speed is
nothiscope, the alarm is off.SPEEDING,0#
SPEEDING,100,2#
Alarming ：1, calling 2, texting, 3 calling and
texting.
POWER0# Turn off power failure alarm message
POWER0# POWER1#
POWER1# Turn on the power failure alarm message
switched on by default
WHERE# Check the latitude and longitude information of
the device
URL# Query device-targeted Google links
PARAM# Query firmware version
STATUS#
Query device settings parameters
VERSION# Query working status of the device
Response
SET IP OK!IP:gps.whatsgps.com#6801#
OK!
SET TIMER OK!
SET CENTER OK!
DEL CENTER OK!
Relayed enable OK!
RESET OK!
SMODE0# 定位包：UTC+0；
（默认）
SET GMT OK! SMODE1# 定位包： UTC+8；
SMODE2# 定位包： GMT；
VMODE# 查看模式
FACTORY OK!
SET VIBRATION ALARM OK!
SET SPEEDING OK!
SET POWER OK! / SET SWITCH,OFF! SET
SWITCH,ON!SMS MODE!
latitude:N23.168690
longitude:E113.434526
speed:0.0 KM/H
Date:2019-07-19 19:00:33
<date: 2019-07-19 19:00:43>
http://maps.google.com/maps?
q=N23.16869
IMEI:393919078611007
APN:cmmtm
IP:s.gpsnow.net:6802
Reporting time :30 seconds
Center number:
Power:49%
GSM signal:high
GPS status:positioning
GPS signal:low
Oil route: oil supply
ACC:off
Charge: disconnect
voltage:0.00,3.75
[VERSION]:GT003_YSJ_SWD_SUP_EN_V1
6
[TIME]:2018/09/14 11:15
[IMEI]:393919078611007
