10 MEASURING

MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Electrical measuring

ELECTROTECHNICAL TESTER

REF 107TA7471
• With sound and optical signals
• Checks: conductivity, voltage, polarity
• For cables, coils, accumulators, fuses, diodes, transistors,
capacitors and more

ELECTRONIC CIRCUIT TESTER

REF 106TA8990
For 6–24 V test

DIGITAL MULTIMETER

REF 106TA8963
• AC/DC voltage: 600 V
• AC/DC current: 10 A
• Resistance
• Diode check
• LCD display

5‑IN‑1 AUTORANGE DIGITAL MULTIMETER

REF 129TA7690
• AC/DC voltage 1000 V • Humidity
• AC/DC current 10 A • Light
• Resistance • Sound level
• Capacitance • Diode test
• Frequency • Auto power off
• Duty cycle • Data hold
• Temperature • Backlight

1134
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Electrical measuring
CLAMP METER

REF 127TA3795
• AC/DC voltage: 700 V/1000 V
• AC/DC current: 1000 A
• Resistance
• Frequency
• Diode test
• Auto and manual ranging
• Data hold
• Max diameter: 42 mm
• Jaw lighting
• Auto power off

PEN TYPE METER

REF 129TA7686
• AC/DC voltage: 600 V
• AC/DC current: 200 mA
• Resistance
• Continuity test
• Logic level test
• Data hold
• Auto power off
• Auto and manual ranging

REPLACEMENT TEST LEADS

REF 112TA4869
• Hard tips
• Comfort‑grip
• Insulated sleeves
• 90° plug
• 1000 V
• 10 A
• Used for REF 127TA3795 and REF 129TA7690

TEST LEADS WITH CLIP

REF 112TA4870
• One red, one black
• 90° plugs with insulated grip, cable 250 mm, 250 V – 10 A
• Used for REF 127TA3795 and REF 129TA7690

1135
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Electrical measuring

ELECTRONIC TESTER

REF 106TA8957
• Connector for making connections and taking measurements
on insulated cables without cutting these or breaking the
protective sleeve
• The cable is pierced with a thin needle
• The incision is nearly untraceable and causes no damage to
the wiring
• Wedge‑shaped base, with a groove on the inside allowing
you to insert the needle exactly in the middle of the cable
• Allows for the connection of two types of banana plugs: the
traditional version and the secured version
• When unscrewed from the housing, it can be used as a
testing point

CIRCUIT TESTER

REF 106TA8958
• Voltages: 6 – 12 – 24 V
• Test connection with tester tips (+) and 10 A clamp (-)

DIGITAL VOLTMETER

REF 106TA8959
• Digital voltmeter that tests batteries, alternators and
regulators
• 12–24 V

1136
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Electrical measuring
FLUKE® 175 – DIGITAL MULTIMETER

Versatile meters for field service

or bench repair
These meters have the features needed to find most electrical, electromechanical and
heating and ventilation problems.

They are simple to use and have significant improvements over Fluke’s original
70 Series like True RMS, more measurement functions, conformance to the latest safety
standards, and a much larger display that is easier to view.

Features: REF 131TA8447

Fluke® 175
True RMS measurements AC
• Battery life: 200 hours typical (alkaline)
Digital display counts, updates 4 times per second 6000 • Size (H x W x D): 190 x 85 x 45 mm
Analog bargraph/33 segments, updates 40 times per second √ • Weight: 0,42 kg
• Warranty: lifetime
Auto and manual ranging √
Display hold and AutoHOLD® √
Min-Max-Average recording mode with Min/Max Alert √
Smoothing mode allows filtering of rapidly changing inputs √ On all inputs

Audible continuity and diode test √

Test lead alert √
Unsafe voltage alert warns for voltages above 30 V √
Low battery indication √
Included accessories:
Ergonomic case with integrated holster √
Test leads with 4 mm lantern tips and
Easy battery and fuse exchange without opening the complete case √ protective cap, installed 9 V battery and
Selectable sleep mode preserves battery life √ user’s manual.

Specifications: Recommended accessories:

Functions Max range Max resolution Accuracy
Voltage DC 1000 V 0,1 mV ±(0,15% + 2)
Voltage AC 1000 V 0,1 mV ±(1,0% + 3)
Current DC 10 A 0,01 mA ±(1,0% + 3) REF 131TA8448 REF 131TA8445 REF 134TA8375
C90 i1010 TLK220 eur
Current AC 10 A 0,01 mA ±(1,5% + 3)
Resistance 50 MΩ 0,1 Ω ±(0,9% + 1)
Capacitance 10 000 μF 1 nF ±(1,2% + 2)
Frequency 100 kHz 0,01 Hz ±(0,1% +1 )
Temperature -40 ºC to 400 ºC 0,1 ºC
Accuracies are best accuracies for each function TVH is an official Fluke® dealer

1137
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Electrical measuring

FLUKE® 115 – DIGITAL MULTIMETER

Compact design for ergonomic

one‑handed operation
An everyday multimeter for technicians, the 115 is for electrical and electronic testing
in field service, industrial, and applications where more than the basic functions
simplify work.

Features: REF 126TA6025

True RMS readings AC Fluke® 115
• Battery life: 400 hours typical
Counts 6000 (9 V alkaline)
Backlight √ • Size (H x W x D): 167 x 84 x 46 mm
Analog bargraph √ • Weight: 0,55 kg
• Warranty: 3 years
Min/Max/Average to record signal fluctuations √
Resistance, continuity √
Frequency, capacitance, diode test √
Display hold √ On all inputs
Auto/manual ranging √
Low battery indication √
Compact case with removable holster √

Specifications: Included accessories:

Functions Max range Max resolution Accuracy Test leads with 4 mm lantern tips and
protective cap, holster, installed 9 V
Voltage DC 600 V 1 mV ±(0,5% + 2) battery and user’s manual.
Voltage AC 600 V 1 mV ±(1,0% + 3)
Current DC 10 A 1 mA ±(1,0% + 3) Recommended accessories:

Current AC 10 A 0,01 A ±(1,5% + 3)

Resistance 40 MΩ (113: 60 KΩ) 0,1 Ω ±(0,9% + 1)
Capacitance 10 000 μF 1 nF ±(1,9% + 2)
Frequency 50 kHz 0,01 Hz ±(0,1% + 2) REF 131TA8444 REF 131TA8446 REF 140TA7507
C50 TPAK TL223–1
Accuracies are best accuracies for each function.

TVH is an official Fluke® dealer

1138
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Electrical measuring
FLUKE® 233 – REMOTE DISPLAY DIGITAL MULTIMETER

Ultimate flexibility with removable display

Imagine the possibilities!
The 233 wireless remote DMM allows maintenance professionals to address an age‑old
problem: display positioning.

You struggled with:

• Twisting uncomfortably to read the display and keep the probes in place
• Wishing for a third hand while taking a measurement
• Running from one place to another to take a measurement
• Needing a second person to read the display, while they were flipping the switch
• Focusing on the display, while making sure the probes stayed in the right place

Now, your problems are over.

The Fluke® 233 can be used for even the most common metre measurements and is
especially suited for those situations where display viewing is challenging.

Key features and benefits: REF 135TA3042

• True RMS AC voltage and current for accurate measurements on non‑linear signals Fluke® 233
• Measure up to 1000 V AC and V DC • Battery life: 400 hours (AA‑batteries)
• Measure up to 10 A (20 A for 30 seconds) • Size (H x W x L): 53 x 93 x 193 mm
• 10 000 μF capacitance range • Weight: 0,604 kg
• Frequency to 50 kHz • Warranty: 3 years
• Convenient built‑in thermometer allows you to take temperature readings without
having to carry a separate instrument Included accessories:
• Resistance, continuity and diode test AA‑batteries (installed), test leads with
• Low‑power wireless technology allows the display to be carried up to 10 meters 4 mm lantern tips, AC172 alligator clips,
(33 ft) away from the point of measurement for added flexibility. No interference 80BK-A temperature probe, CD-ROM
with measurements (user manual, technical notes and
• The removable magnetic display can be conveniently mounted where it is easily application images)
seen
• Take measurements without holding the meter to improve visual focus on probes Recommended accessories:
and augment safe electrical measurements
• Use as a conventional multimeter when the display is connected
• Radio transmitter automatically turns off when the display is connected to the meter
• Auto power off maximizes battery life
• Min/Max and Average recording to capture variations automatically
• Test continuity and diodes
• Easy to read display with large digits and bright backlight REF 131TA8467 REF 107TA1224
AC285 TL220–1

REF 131TA8446 REF 131TA8445

TPAK i1010

TVH is an official Fluke® dealer

1139
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Electrical measuring

FLUKE® 375 – CLAMP METER

Be ready for anything

With True RMS AC voltage and current measurements, the Fluke 375 clamp meter can
read up to 600 V and 600 A in both AC and DC modes, and is capable of frequency
measurement up to 500 Hz.

Additionally, the 375 is compatible with the new iFlex flexible current probe (sold
separately), which expands the measurement range to 2500 A AC (no DC).

Features: REF 138TA3969

Fluke® 375
True RMS √ • Size (H x W x D): 248 x 85 x 45 mm
Display backlight √ • Weight: 0,375 kg
• Warranty: 3 years for electronics,
Display hold √ 1 year for cable and clamp assembly
Low pass filter √
Inrush current mode √
Large jaw √ Included accessories:
Soft carrying case, test leads, 2 AA
AC/DC current √
alkaline batteries, coated instruction
AC/DC voltage √ card and safety information sheet.

Specifications: Recommended accessories:

Functions Range Accuracy
Current AC 0–600 A 2% ±5 digits
Current DC 0–600 A 2% ±5 digits
Inrush 100 mS
Voltage AC 0–600 V 1,5% ±5 digits REF 138TA3971 REF 138TA3972
i2500–10 i2500–18
Voltage DC 0–600 V 1% ±5 digits 10 inch iFlex (250 mm) 18 inch iFlex (450 mm)
Flexible current probe Flexible current probe
Resistance 60 kΩ 1% ±5 digits
Capacitance 1 μF to 1000 μF 1,9% ±2 digits
Continuity ≤ 30 Ω

REF 131TA8467 REF 140TA7507

AC285 TL223–1

TVH is an official Fluke® dealer

1140
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Electrical measuring
TLK282‑1 SUREGRIP™ DELUXE AUTOMOTIVE TEST LEAD KIT

REF 131TA8462
Contents:
• TP81 insulation piercing clip set
• TP40 automotive back probe pins (five)
• TL224 SureGrip™ silicone test lead set
• TP238 SureGrip™ insulated test probe set
• AC220 SureGrip™ alligator clip set
• AC285 SureGrip™ large jaw alligator clip set
• AC280 SureGrip™ hook clip set
• Soft case

TL75‑1 HARD POINT™ TEST LEAD SET

REF 112TA4865
• One pair (red, black) comfort grip probes with PVC insulated
test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT II 1000 V, 10 A rating. UL listed

TL224 SUREGRIP™ SILICONE TEST LEAD SET

REF 129TA7685
• DMM test leads (red, black) with safety shrouded, standard
diameter banana plugs
• Right-angle connector on one end and straight connector on
the other
• Reinforced strain relief
• 1,5 meter silicone-insulated wire resists heat & cold
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed

TP220‑1 SUREGRIP™ TEST PROBE SET

REF 112TA4863
• One pair (red, black) of industrial test probes
• Sharp, 12 mm stainless steel tip provides reliable contact
• Flexible finger barrier improves grip
• Recommended for use with TL222 and TL224 test leads
• CAT II 1000 V, 10 A rating. UL listed

1141
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Electrical measuring

TP74 LANTERN TIP TEST PROBE SET

REF 131TA8464
• One pair (red, black)
• Tips include banana-style spring contacts with nickel-plated
brass ends
• CAT III 1000 V, 10 A rating. UL listed

AC283 SUREGRIP™ PINCER CLIP SET

REF 131TA8466
• One pair (red, black) of nickel-plated pincers open to 5 mm
• 114 mm flexible insulated shaft
• Recommended for use with TL222 and TL224 test leads
• CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed

TOOLPAK (TPAK)

REF 131TA8446
• The meter hanging solution
• Combine components to meet most hanging needs

Contents:
• Universal hanger clips (2)
• Hook & loop straps (2 lengths)
• Strong magnet

1142
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Mechanical measuring
DIGITAL VERNIER CALIPER

REF 138TA6557
• Max measuring length: 150 mm
• Reading to 0,01 mm (0,0005”)
• Length: 225 mm

FORK CALLIPER

REF 107TA4779
To test any fork to wear

ANALOGUE VERNIER CALLIPER

REF 131TA6365
• Metric + inch version
• 0–150 mm
• Reading to 0,05 mm
• Reading 1/128”

THREAD GAUGE

REF 107TA5460
Metric and Whitworth

1143
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Mechanical measuring

PRESSURE GAUGE

REF 107TA1980
To check the back pressure between the engine and the
catalyst

1144
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Temperature measuring
INFRARED THERMOMETER

REF 129TA7691
• Temperature range from -20 °C to 537 °C
• Backlight LCD display
• Auto power off 10 sec.
• Automatic range
• Circular twelve dots laser targeting
• °C/°F display selection
• Hold function

FLUKE® 62 MAX+ – INFRARED THERMOMETER

Takes the heat and the dust, water and

3-meter drop
Temperature is often the first indication of potential problems in electrical and
mechanical applications.
But how can you easily determine if an electrical panel has a hot spot, a motor
is overheating or an HVAC system is inefficient? The answer is: with an infrared
thermometer. With handheld, non‑contact IR thermometers, you can instantly
measure equipment temperatures in hard‑to‑reach or hazardous areas.
And with early detection of abnormal temperatures comes early correction of
problems!

• Dust- and water‑resistant: IP54 rated for dust and water resistance.
• Rugged: 3-meter drop tested.
• Ergonomically designed: completely redesigned for a more comfortable hand fit.
• Small in size: small and lightweight, clips to your toolbelt or belt loop or easily fits
into your toolbox.
• Distance to spot: precise laser technology makes for more accurate and repeatable
measurements. REF 140TA7499
• Dual lasers: the 62 MAX+ has dual rotating lasers to help you identify the area to be Fluke® 62 MAX+
measured. The measurement area is the spot between the dots. • Size (H x W x D): 175 x 85 x 75 mm
• Large backlit display: large screen makes data easier to read, even in dark areas. • Weight: 0,26 kg
• Min/Max/Avg/Dif: displays the minimum, maximum or average temperature, or the • Warranty: 3 years
difference between two measurements.
• Alarm: Hi and Lo alarms for rapid display of measurements outside the limits. Included accessories:
• Power: powered by a single, standard AA battery. Carbon clip

Features:
Temperature range -30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy ±1 °C or ±1,0% of reading
±2,0 °C at -10 °C to 0 °C
±3,0 °C at -30 °C to -10 °C
Response time <300 ms (95% of reading)
Spectral response: 8 to 14 microns
Emissivity: 0,10 to 1,00
Optical resolution 12:1 (calculated at 90% energy)
Display resolution 0,1 °C (0.2 °F)
±0,5% of reading or <±0,5 °C (1 °F) whichever
Repeatability of readings
is greater
Power AA battery TVH is an official Fluke® dealer

1145
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Temperature measuring

FLUKE® 123 – SCOPEMETER

Three‑in‑one simplicity
The compact ScopeMeter® 120 series is the rugged solution for industrial
troubleshooting and installation applications. It is a truly integrated test tool, with
oscilloscope, multimeter and “paperless” recorder in one easy‑to‑use instrument.
Find fast answers to problems in machinery, instrumentation, control and power
systems.

• Dual‑input 20 MHz digital oscilloscope

• Two 5000 counts True RMS digital multimeters
• A dual‑input TrendPlot™ recorder
• Connect‑and-View™ trigger simplicity for hands‑off operation
• Shielded test leads for oscilloscope, resistance and continuity measurements
• Up to 7 hours battery operation
• 600 V CAT III safety certified REF 131TA8457
• Optically isolated interface for PC and printer connection (optional) Fluke® 123
• Rugged, compact case • Battery life: 7 hours (alkaline)
• Size (H x W x D): 232 x 115 x 50 mm
• Weight: 1,2 kg
Connect‑and-View™ triggering for an instant, stable display • Warranty: 3 years
Wrong settings show unstable and sometimes wrong results.
Fluke’s unique Connect‑and-View™ recognizes signal patterns,
and automatically sets up correct triggering. It provides a
stable, reliable and repeatable display of virtually any signal – CUS
including motordrive and control signals – without touching a
button. Signal changes are instantly recognized and settings Included accessories:
Connect‑and-View™
adjusted for – once again – a stable display. PM 8907 line adapter/charger, STL120-
captures even the most
complex motor drive signals. lll shielded test leads set (1 red, 1 grey)
including hook clips, BB120 shielded
Use TrendPlot™ to help find intermittences fast BNC adapter, BP120MH NiMH battery
Intermittences can be caused by bad connections, dust, dirt, corrosion or simply pack, TL175 Safe‑guard testlead, Getting
broken wiring or connectors. In this “paperless recorder” mode, you can plot the Started booklet, user’s manual (CD-ROM)
minimum and maximum peak values and average over time, up to 16 days.
Recommended accessories:

REF 131TA8459 REF 131TA8460 REF 131TA8458

SCC120 C125 SCC128

REF 134TA8727
Kit 123/S
Contents:
REF 131TA8457
Industrial ScopeMeter®
(20 MHz) +
REF 131TA8459
SCC120 kit

TVH is an official Fluke® dealer

1146
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Temperature measuring
FLUKE® TI100 AND TI105 – THERMAL IMAGERS

The lightest, most rugged and

easiest‑to‑use thermal imager
A Fluke thermal imager can save you time and money by finding potential problems
before they become costly failures.

With the innovative features and functionality in the Fluke Ti100 imager, you can
perform infrared inspections faster and more efficiently and thoroughly document
problem areas for additional follow‑up.

REF 140TA7524
Fluke® TI100
• Size (HxWxD): 284 x 86 x 135 mm
• Weight: 726 g
• Warranty: 2 years

Thermal imager for industrial and

commercial applications
Experience the ultra‑sleek intelligent design developed for you! Rugged, ergonomic,
lightweight, point‑and‑shoot, focus‑free imager.

Find problems with IR-Fusion® technology (picture in picture mode, full IR, Full
visible). Illuminate dark places with the integrated torch.
Show where the problems exist with the laser pointer and enjoy non‑stop thermal
imaging with a field replaceable battery.

So the Fluke TI105 has all the features you need to perform inspections faster and
easier. A thermal imager designed with you in mind.

REF 140TA8750
Fluke® TI105
• Size (HxWxD): 284 x 86 x 135 mm
• Weight: 726 g
• Warranty: 2 years

Included accessories: Recommended accessories:

SmartView® software, AC power adapter,
lithium ion smart battery (1), USB cable,
2 GB SD memory card, hard carrying case,
soft transport bag, adjustable hand strap
(left- or right‑handed use), user manual REF 140TA8977 REF 140TA8978
FLK-TI-SBP3 TI-CAR CHARGER
and warranty registration card. Extra rechargeable Vehicle charger
battery
TVH is an official Fluke® dealer

1147
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Temperature measuring

FLUKE® TI100 AND TI105 – THERMAL IMAGERS

Specifications TI100 TI105

Temperature measurement range -20 °C to 250 °C -20 °C to 250 °C
Temperature measurement accuracy ±2 °C or 2% (at 25 °C nominal, ±2 °C or 2% (at 25 °C nominal,
whichever is greater) whichever is greater)
Field of view 22,5°H x 31°V 22,5°H x 31°V
Spatial resolution 3,39 mRad 3,39 mRad
Minimum IR focus distance 1,2 m 1,2 m
Focus mechanism Focus-free 1,2 m and beyond Focus-free 1,2 m and beyond
IR resolution (FPA size) 160 x 120 FPA uncooled microbolometer 160 x 120 FPA uncooled microbolometer
Thermal sensitivity ≤0,10 °C at 30 °C target temp. (100 mK) ≤0,10 °C at 30 °C target temp. (100 mK)
Minimum span (in manual mode) 2,5 °C 2,5 °C
Minimum span (in auto mode) 5 °C 5 °C
IR-Fusion® technology Full infrared only Full infrared, PIP 1,2 m to 4,6 m,
Full visible
Spectral band 7,5 µm to 14 µm (long wave) 7,5 µm to 14 µm (long wave)
Standard palettes Blue-Red, Ironbow, Grayscale, Amber Blue-Red, Ironbow, Grayscale, Amber
LCD display 3,5 inch diagonal (portrait format) 3,5 inch diagonal (portrait format)
Visible camera 2 megapixel industrial-grade
User definable spot markers in SmartView® only in SmartView® only
Level and span control Manual and auto Manual and auto
Emissivity correction Yes Yes
Background (reflected) compensation Yes Yes
Laser pointer Yes Yes
Torch Yes
Memory storage 2 GB SD memory card 2 GB SD memory card
Direct download capability Mini USB download direct to PC Mini USB download direct to PC
Memory review Thumbnail review Thumbnail review
Field replaceable battery 1 lithium-ion 1 lithium-ion
Battery life 4+ hours (each) 4+ hours (each)
Charging power supply Yes Yes
Drop test 2 meter 2 meter
Ingress protection (IP) rating IP54 IP54
Operating temperature range -10 °C to 50 °C -10 °C to 50 °C
Operating humidity Operating and storage 10% to 95% - Operating and storage 10% to 95% -
Non-condensing Non-condensing
Storage temperature range -20 °C to 50 °C -20 °C to 50 °C
Extended warranty and service plans Yes Yes
Recommended calibration cycle 2 years 2 years

Czech, English, Finnish, French, German, Czech, English, Finnish, French, German,
Italian, Japanese, Korean, Polish, Italian, Japanese, Korean, Polish,
User manuals Portuguese, Russian, Simplified Chinese, Portuguese, Russian, Simplified Chinese,
Spanish, Swedish, Traditional Chinese, Spanish, Swedish, Traditional Chinese,
Turkish, Dutch and Hungarian Turkish, Dutch and Hungarian

1148
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Battery measuring
CAR ELECTRONIC TESTER

REF 106TA8960
• Battery, alternator and regulator tester
• 12 V

1149
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Air measuring

PRESSURE MEASURING KIT

REF 134TA2344
This diagnostic service case has all the required components to
diagnose the hydraulics on your machine.

Contents:
All these items are included in a very durable ABS case
• Test points in various dimensions: M8 – M10 – M12 – M14.
There are also test points with adaptors included to fit inside
your machine
• Test hoses in different lengths: 1 hose with length 1,5 m and
2 hoses with length 1 m
• Hose caps in various dimensions to diagnose your piston
pump
• Analog pressure gauges with different ranges: 1 pressure
gauge with a 0–600 bar range and 2 pressure gauges with a
0–60 bar range

Other test points, test hoses and pressure gauges are available
from stock. Please contact the sales department.

1150
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Special measuring
XENON TIMING LIGHT

REF 131TA6366
• The xenon timing light allows the dynamic ignition timing
to be set. Includes inductive pickup for simple connection.
• Suitable for any petrol engine vehicle with 12 V ignition
system including electronic types where applicable, though
some ignition systems are not externally adjustable.
• Indicates ignition timing and allows adjustment to
manufacturer’s specification. Inductive pick‑up clips directly
on the ignition HT lead. Powered by vehicles own 12 V
battery.
• The special xenon bulb provides the ultrabright flash
needed to see engine timing marks under normal daylight
or bright workshop conditions.
• Operates on all 12 V ignition systems
• Xenon bulb providing brilliant blue/white
• 1 000 000 flash capacity
• Automotive reverse polarity and overload protection
• Inductive pickup
• Replaceable xenon flash tube

SMOKE TEST SET

REF 106TA6388
• Determines efficient combustion and is internationally
recognized as the standard method for evaluating smoke
density in the flue gases from distillate fuels. Too much
smoke is one of the most common causes of excessive fuel
usage and expensive service requirements.
• That is precisely why the smoke test set is an indispensable
part of any oil burner service job; and with the tester, an
accurate smoke reading takes less than a minute. The 10
spots on the scale range in equal photometry steps from
white to black to completely cover any smoke condition
which may be experienced on residential or commercial oil
burners.

ULTRASONIC DISTANCE METER

REF 129TA7694
• Measurement range: 0,6–15 m
• Red laser
• Calculates area and volume
• Autoconverts feet to metres
• Backlight
• Laser to target the point to which you want to measure

1151
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Special measuring

DIGITAL SOUND LEVEL METER

REF 129TA7692
• Measurement range: 30–130 dB
• Frequency range: 30 Hz to 8 kHz
• LCD digital display
• Wide dynamic range
• Backlight
• Date and time display

DIGITAL TACHOMETER

REF 112TA4882
• Contact and non-contact measurements
• Sharp visible laser beam
• Measuring ranges:
–– Revolutions (non contact): 6–99 999 RPM
–– Revolutions (contact): 6–25 000 RPM
–– Revolutions (counter): 1–99 999 rev
–– Surface speed:
–– 1–3810 m/min
–– 36–99 999 inches/min
–– 3–12 500 ft/min
–– 1–4167 yd/min
–– Length:
–– 0,2–99 999 m
–– 0,5–99 999 ft
–– 0,01–99 999 yd
• Accuracy:
–– ±0,01% ±1 digit
–– ±0,4% ± 1 digit (speed and length)
• Memory system: 14 readings (including: last, average, max
and min)
• Sharp visible laser beam
• Auto power off
• Over range indication
• Carrying case, LC adapter, 3 batteries, 1 rubber tip, 1 rubber
funnel, 1 rubber measuring wheel, 35 self-adhesive reflective
tapes, manual in German and English included

HANDYMAN – COMPONENT TESTER

REF 106TA1494
• Fast accurate testing of SCR’s, diodes
• Capacitors
• Transistors
• FETS

1152
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Special measuring
CARBON MONOXIDE ANALYZER
REF 106TA6390
The CO analyzer is a hand‑held instrument designed to locate CO
in ambient air as well as in stack gases. The continuous sampling
instrument quickly and accurately measures levels of CO between
0 and 2000 ppm.
This is also available in a high range version (0–85 000 ppm) for
vehicle emission testing and forklift tuning.

Features:
• Quickly measures and displays low levels of CO 0–2000 ppm
• Measures in increments of 1 ppm
• Multi‑purpose strap for easy holding
• Probe and hose assembly for flue gas testing
• Highly visible digital display with backlight

Typical applications:
• CO safety checks on combustion stack gas and ambient air levels
• Analyzing indoor air quality and safety
• Furnace and boiler servicing or replacement

FLUKE® 414D – LASER DISTANCE METER

Measure 50 metres without moving at all

Put the Fluke 414D on your tool belt and reach beyond the common tape measure –
up to 50 metres.

This professional-grade laser distance meter is fast and easy to use, improving
accuracy and reducing measurement errors. You’ll save time and money at every step.
The most advanced laser technology for distance measurement.

Features: REF 140TA9089

Simple one-button operation to instantly measure distance Fluke® 414D
√ • Size (H x W x D): 116 x 53 x 33 mm
between two objects
• Weight: 0,113 kg
Bright laser for easy targeting even at longer distances √ • Warranty: 3 years
Quick calculation of area (square feet/meters) and volume. √
Easy addition and subtraction function √ Included accessories:
Two AAA batteries, users manual on CD
Pythagoras calculation for determining distance indirectly from (17 languages), quick reference guide,
√
two other measurements vinyl carrying pouch, lanyard.
Two-line display with display hold (until next button is pressed) √
Minimum/maximum function √
Improved battery life from automatic shut-off feature √

Specifications:
Range 50 m
Accuracy ±2 mm
Memory 5 measurements
Battery life Up to 3000 measurements
Automatic laser off After 90 seconds
Automatic power off After 180 seconds
Operating temperature 0 °C to 40 °C
Storage temperature -25 °C to 70 °C
Maximum altitude 3000 m TVH is an official Fluke® dealer

1153
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Special measuring

HYDRAULIC PUMP TESTER

REF 134TA2638
(Old: 74/9556-902)
• Uni-directional flow meters offer an economical solution for
measuring fluid flow in a wide range of applications
• 240 bar
• 3/4”
• 15–190 LPM

DRAIN INDICATOR

REF 143TA5651
(Old: 74/9556-901)

DRAIN INDICATOR

REF 143TA5652
(Old: 74/9556-903)

1154
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Special measuring
HYDRAULIC PUMP TESTER

REF 134TA2637
(Old: 74/9556-962)
• The test kit provides the service engineer with quick, accurate
and simple performance testing of pumps, motors, valves,
steering systems, cylinders and complete hydraulic circuits
• The kit comprises of a direct acting flow indicator with built-
in thermometer, a loading valve and a pressure gauge all
built into a strong steel case with a removable lid
• No batteries required
• Large, clear, easy to read dials
• Installation is extremely easy
• 10–200 l/min
• Pressures up to 220 bar
• Built-in thermometer
• Allows reverse flow

DIGITAL HYDRAULIC TESTER

REF 134TA2639
(Old: 74/9556-963)
• A simplified digital hydraulic tester with a single ON/OFF
switch
• Measures flow, temperature and pressure in one robust unit

Technical overview:
• Flows up to 800 lpm (210 US gpm)
• Pressure up to 480 bar (7000 psi)
• Temperature up to 120 °C (250 °F)

DIGITAL HYDRAULIC TESTER

REF 143TA5672
(Old: 74/9556-746)

1155
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Special measuring

PRESSURE GAUGE

REF 143TA5653
(Old: 74/9556-938)
• Pressure: 10 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5654
(Old: 74/9556-939)
• Pressure: 20 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5655
(Old: 74/9556-940)
• Pressure: 40 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5656
(Old: 74/9556-941)
• Pressure: 70 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

1156
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Special measuring
PRESSURE GAUGE

REF 143TA5657
(Old: 74/9556-942)
• Pressure: 135 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5662
(Old: 74/9556-753)
• Pressure: 100 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5663
(Old: 74/9556-754)
• Pressure: 160 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5658
(Old: 74/9556-943)
• Pressure: 200 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

1157
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Special measuring

PRESSURE GAUGE

REF 143TA5664
(Old: 74/9556-755)
• Pressure: 250 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5659
(Old: 74/9556-944)
• Pressure: 400 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5660
(Old: 74/9556-945)
• Pressure: 420 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

PRESSURE GAUGE

REF 143TA5661
(Old: 74/9556-961)
• Pressure: 600 bar
• Diameter: 63 mm
• Thread: 1/4” BSP

1158
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Special measuring
KIT OF 2 PRESSURE GAUGES

REF 143TA5665
(Old: 74/9556-930)
• 0–40 bar (500 psi)
• 0–400 bar (5800 psi)

KIT OF 4 PRESSURE GAUGES

REF 143TA5666
(Old: 74/9556-931)
• Provides a complete test system for rapid pressure testing
• Pressure test points can be fitted anywhere in the circuit for
instant pressure checks saving installation costs of piping and
gauges

Delivered with:
• 4 gauges: 20 – 70 – 210 – 400 bar
• 2 hoses: 2 metres long
• 4 test points: 2 x 1/8” BSPF – 2 x 1/4” BSPF
• 3 adaptators: 3/8” BSPF – 1/2” BSPF – 9/16” JIC
• 1 metal case

KIT OF 6 PRESSURE GAUGES

REF 143TA5667
(Old: 74/9556-932)
• 1 x 10 bar
• 2 x 40 bar
• 1 x 70 bar
• 2 x 100 bar

KIT OF 8 PRESSURE GAUGES

REF 143TA5668
(Old: 74/9556-933)
• 1 x 10 bar
• 2 x 40 bar
• 3 x 210 bar
• 2 x 400 bar

1159
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Special measuring

HANDHELD HYDRAULIC READOUTS AND DATALOGGERS

REF 143TA7407
(Old: 74/9556-980)

PRESSURE TRANSDUCER

REF 143TA7408
(Old: 74/9556-1261)

CONNECTION CABLE

Picture not
yet available

REF 143TA7409
(Old: 74/9556-1262)
Length: 2 m

HOSES MICRO FLEXIBLE PUSH‑PULL

REF 143TA5678
(Old: 74/9556-937)
• Max 400 bar
• Length: 1,85 m

REF 143TA5679
(Old: 74/9556-947)
• Max 400 bar
• Length: 2,4 m

1160
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com

Special measuring
COUPLINGS

Sizes REF
M14 x 1,5 143TA5680 (Old: 74/9556-948)

M16 x 2 143TA5681 (Old: 74/9556-949)

1/8” BSPF 143TA5682 (Old: 74/9556-950)

1/4” BSPF 143TA5683 (Old: 74/9556-951)

1/8” BSPT 143TA5684 (Old: 74/9556-952)

1/4” BSPT 143TA5685 (Old: 74/9556-953)

7/16” UNF 143TA5686 (Old: 74/9556-954)

COUPLINGS

Sizes REF
M18 X 1,5 to 1/8” BSPM/F 143TA5687 (Old: 74/9556-956)

1/2” BSP to 1/8” BSPM/F 143TA5688 (Old: 74/9556-957)

3/8” BSP to 1/8” BSPM/F 143TA5689 (Old: 74/9556-958)

7/8” JIC to 1/8” BSPF 143TA5690 (Old: 74/9556-959)

9/16” JIC to 1/8” BSPF 143TA5691 (Old: 74/9556-960)

PRESSURE SENSOR

Test point
M16 x 2 30 AF 27 AF Ø 27 mm

92 mm

REF 143TA5673
(Old: 74/9556-748)

TEMPERATURE SENSOR

O-ring
7,8 x 1,78 mm 17 AF Ø 16,5 mm
Ø 7 mm
M10 x 1

8 mm
17,5 mm 50 mm

REF 143TA5674
(Old: 74/9556-749)

1161
 MEASURING
For all our latest catalogue updates and company info: www.tvh.com
Special measuring

SPEED SENSOR

REF 143TA5675
(Old: 74/9556-750)

TURBINE MEASURE FLOW + VALVE

REF 143TA5676
(Old: 74/9556-965)

TURBINE MEASURE FLOW

REF 143TA5677
(Old: 74/9556-751)

1162