MOOGLE

AMIGURUMI
PATTERN
YARN COLORS
ABOUT THIS PATTERN
Suggested colors
While making this amigurumi you will work in
Red Heart Super Saver in:
continuous rounds, unless told otherwise. Use
Aran
a stitch maker to mark end of your rounds.
Dark Orchid
Perfect Pink The finished amigurumi should
Lemon measure approximately 12 inches tall
Black (measured at top of the head ball). Size may
vary, depending on yarn type and personal
OTHER MATERIALS
yarn tension.
Instructions that need to be repeated will be
Pink Felt for inner ears marked with brackets followed by the number
Stem Wire 18 Gauge of times it needs to be repeated.
Fiber-fil stuffing
Hot glue (optional) Example:
Round 4) [2 sc, inc] rep 6 times (24)
Eye materials: can be
made with needle
felting, embroidered IMPORTANT INFORMATION
with yarn, or with black
You may not claim this pattern as your own.
craft felt
You may not alter, copy, sell, or redistribute
this pattern in whole or in part.
TOOLS NEEDED
This pattern is intended for personal use only.
G hook (4.0mm)
Scissors If you publish photos of items made from this
Yarn Needle pattern I ask that you please give me credit as
Slicker Brush the original designer of the pattern. It's always
a good idea to give credit where credit is due.

1
BODY PARTS

Abbreviations
Round 4) [2 sc, inc} rep 3 times (12)
Round 5) [3 sc, inc] rep 3 times (15)
sc = single crochet Round 6) [4 sc, inc] rep 3 times (18)
dc = double crochet Round 7) sc around (18)
hdc = half double crochet Round 8) sc around (18)
inc = increase (2 sc in the next sc) Finish off with a slip stitch and leave a long tail
dec = invisible decrease for sewing. Do not stuff. Fold the ear flat.
sl st = slip stitch
rep = repeat Foot
Use Aran. Make two.
Round 1) 6 sc in magic ring (6)
Head
Round 2) [1 sc, inc] rep 3 times (9)
Use Aran.
Round 3) sc around (9)
Round 1) 6 sc in Magic Ring (6)
Round 4) [2 sc, inc] rep 3 times (12)
Round 2) inc around (12)
Round 3) [1 sc, inc] rep 6 times (18) Round 5) [3 sc, inc] rep 3 times (15)
Round 4) [2 sc, inc] rep 6 times (24) Round 6) [4 sc, inc] rep 3 times (18)
Round 5) [3 sc, inc] rep 6 times (30)
Round 6) [4 sc, inc] rep 6 times (36) Finish off the 1st foot you make with a slip
Round 7) [5 sc, inc] rep 6 times (42) stitch. Do not finish off the 2nd foot you make!
Round 8) [6 sc, inc] rep 6 times (48) Leave the 2nd foot on your hook and proceed to
Round 9) [7 sc, inc] rep 6 times (54) “Body” instructions.
Round 10) – Round 18) sc around (54) To make the body we are going to work from
Round 19) 3 inc, 12 sc, 3 inc, 36 sc (60) the bottom up.
Round 20) [1sc, inc] rep 3 times, 12 sc, [1sc,
inc] rep 3 times, 36 sc (66) Body
Round 21) sc around (66) To form the body, we are going to join the two
Round 22) sc around (66) feet together and continue to crochet in the
Round 23) [1 sc, dec] rep 3 times, 12 sc, [1 sc, round around them.
dec] rep 3, 36 sc (60) With the 2nd foot still on your hook, chain 6.
Round 24) [3 sc, dec] rep 12 times (48) Then, insert your hook into any stitch on the
Round 25) [6 sc, dec] rep 6 times (42) finished 1st foot and make a sc to join them.
Round 26) [5 sc, dec] rep 6 times (36) Place your stitch marker in this stitch to mark
Round 27) [4 sc, dec] rep 6 times (30) the end of the round. (See photos on next page
Finish off with a slip stitch and leave open. for guidance.)
Leave a long tail for sewing. Stuff the head.
Make sure the cheeks get plenty of stuffing
to help them puff out.

Ear
Use Aran. Make two.
Round 1) 3 sc in magic ring (3)
Round 2) inc in each stitch around (6)
Round 3) [1 sc, inc] rep 3 times (9)

2
 BODY PARTS

Body (conintued...) Round 7) sc around (48)

Round 8) [7 sc, inc] rep 6 times (54)
Photo guide for joining the feet
Round 9) sc around (54)
a. b. Round 10) – Round 20) sc around (54)
Round 21) [7 sc, dec] rep 6 times (48)
Round 22) sc around (48)
Round 23) [6 sc, dec] rep 6 times (42)
Round 24) sc around (42)
Round 25) [5 sc, dec] rep 6 times (36)
Round 26) sc around (36)
Round 27) [4 sc, dec] rep 6 times (30)
Round 28) sc around (30)
c. d. Finish off with a slip stitch and leave a long tail
for sewing. Leave open and stuff the body.

Arms
Use Aran. Make two.
Round 1) 6 sc in magic ring (6)
Round 2) [1 sc, inc] rep 3 times (9)
Round 3) sc around (9)
a. 2nd foot still on your hook Round 4) [2 sc, inc] rep 3 times (12)
b. Chain 6. Round 5) [3 sc, inc] rep 3 times (15)
c. Insert hook into any stitch on 1st foot. Round 6) sc around (15)
d. Make a sc stitch to join the two feet. Place a stitch Round 7) sc around (15)
marker into this stitch.
Round 8) [3 sc, dec] rep 3 times (12)
Now we will continue to crochet in the round Round 9) sc around (12)
around both feet. This will be Round 7. *Note Round 10) sc around (12)
that you will also be crocheting into the chain Stuff the arm. To close off, fold the open end of
as we crochet in the round. Each chain stitch the arm flat and sc across the opening. Leave a
will hold a sc stitch in its front loop and back long tail for sewing.
loop.
Nose
Stitch marker placed in
the joining sc stitch Use Pink.
Round 1) 6 sc in magic ring (6)
Round 2) 2 sc, 2 hdc in the next st, 2 sc, 2 hdc
in the next st (8)
Finish with a slip stitch. Leave a long tail for
sewing.

Visual guide for Round 7. Each foot has 18 stitches. Each chain stitch
will yield 2 sc stitches, so a total of 12 stitches. (18+18+12=48)
Round 7 should yield a total stitch cound of 48.

3
BODY PARTS

Whiskers Assemble the Head Ball and Stem

Use Aran. Make Four. Take approximately 10 inches of 18 gauge
This is a small piece that is made in Rows, stem wire and bend one end into a rounded
not in the round. shape.
Chain 9.
Row 1) sl st into 2nd chain from your hook,
7 sc (8)
Finish off and leave a long tail for sewing.

Head Ball
Use Light Yellow. Stuff as you go.
Round 1) 6 sc in magic ring (6)
Round 2) inc in each stitch around (12)
Round 3) [1 sc, inc] rep 6 times (18) Insert the rounded end of the stem wire and
Round 4) [2 sc, inc] rep 6 times (24) push it through the head stem.
Round 5) [3 sc, inc] rep 6 times (30)
Round 6) [4 sc, inc] rep 6 times (36)
Round 7) – Round 12) sc around (36)
Round 13) [4 sc, dec] rep 6 times (30)
Round 14) [3 sc, dec] rep 6 times (24)
Round 15) [2 sc, dec] rep 6 times (18)
Round 16) [1 sc, dec] rep 6 times (12)
Round 17) 6 dec (6)
Finish off with a slip stitch. Leave a long tail
for sewing. Leave open and finish stuffing the
ball. Insert the rounded end of the stem wire into
the open end of the head ball. Sew the open
Head Stem ends of the ball and stem together. Set aside
Use Black. for final assembly.
This piece is a long skinny tube that is formed
by first making a chain, then connecting the
ends of the chain with a slip stitch.
Chain 6. Insert your hook into the 1st chain
stitch and make a slip stitch to connect the
ends of the chain. Now we will crochet in the
round.
Round 1) sc in each stitch around (6)
Round 2) – Round 14) sc around (6)
Finish with a slip stitch and leave a long tail
for sewing. Leave both ends open. Do not
stuff.

4
BODY PARTS

Inner Ears
Take a pink sheet of craft felt and use your
scissors to cut out two small triangle shapes.

Wings
Use Dark Purple. Make two.
This piece is made by crocheting in ROWS, not
in the round. At the end of each row chain 1
before turning your work.
Chain 2.
Row 1) 3 sc into the 1st chain st (3)
Row 2) inc, sc, inc (5)
Row 3) inc, 3 sc, inc (7)
Row 4) sc across (7)
Row 5) inc, 2 sc, inc, 2 sc, inc (10)
Row 6) inc, 8 sc, inc (12)
Row 7) inc, 10 sc, inc (14)
Row 8) inc, 5 sc, inc, 6 sc, inc (17)
Row 9) inc, 15 sc , inc (19)
Row 10) inc, 11 sc, ch 3 then turn your work
Row 11) Part A- working into chain: (sl st
into 2nd ch from hook, sc), sl st into 3rd st
from base of chain, 2 sl st
Part B- ch 4, working into chain: (sl st into
2nd ch from hook, sc, hdc), sl st into 3rd st
from base of chain, 2 sl st
Part C-ch 5, working into chain: (sl st into
2nd ch from hook, sc, hdc, 2 dc in the next st),
sl st into 3rd st from base of chain (Visual Guide on next page for Row 11)

5
BODY PARTS

Visual Guide for Wing Row 11

Part A:

1. 2. 3. 4.
Chain 3 Working into the chain: sl st into 3rd st from 2 sl st
sl st into 2nd ch from base of chain
hook, sc

Part B:

1. 2. 3. 4.
Chain 4 Working into the chain: sl st into 3rd st from 2 sl st
sl st into 2nd ch from base of chain
hook, sc, hdc
Part C:

1. 2. 3.
Chain 5 Working into the chain: sl st into 3rd st from
sl st into 2nd ch from base of chain
hook, sc, hdc, 2 dc in the
4.
Crochet a border of
next st
sc's along the top of
the wing.

6
ASSEMBLY

Use the provided pictures of the finished Moogle as a visual

aid to help guide you in the assembly process. I recommend
using pins to help with part placement before sewing things
together.

1. Sew the ears to the head. The inner parts

of the ears line up with approximately
row 5 on the head.

2. Sew the open end of the head to the open

end of the body.

3. Sew the nose to the front of the face. The

top of the nose approximately lines up
between rows 18 and 19 on the head.

4. Sew the arms to the sides of the body. If

you plan to add neck fur the arms should be
sew on at row 26, no higher. The last two
rows of the body/neck will be the space used
for applying neck fur.

7
 ASSEMBLY

5. Adding Neck Fur/Fluff

This step is optional. Not all moogles have fluff! We are going to need our scissors, crochet hook and a slicker brush
for brushing out the yarn.

The first step will be to cut out many small sections of Aran color yarn. Each piece
should be approximately 4 inches in length. You will need around 60 pieces.

Next you will root each strand of yarn to the neck. You will root a strand of yarn to each stitch on the last two rows
of the body. See the pictures below for guidance.

1. 2. 3. 4.

Push your hook through a Pull the strand of yarn Yarn over and hook both Grab both ends of the strand
stitch on the body and hook a through the stitch, drawing ends of the strand and pull with your fingers and pull to
strand of yarn. up a loop. through the loop on your tighten.
hook.

Moogle after all the strands have Use your slicker brush to brush out After brushing the fur will likely be
been rooted around last two rows the strands of yarn. The more you too poofy and uneven. Use your
on the body. brush the more fluffy the yarn will scissors to trim up the fur and
get. make it more even around the
neck.

8
 ASSEMBLY

6. Apply the pink felt to the inner area of the

ears with glue or a felting needle. Use black
yarn and your yarn needle to embroider the
eye lines to the face. Eyes could also be
made by cutting lines out from craft felt or
could be needle felted. Use whichever
method you prefer. The inner eyes line up
between rows 17 and 18 on the head and sit
about 6 stitches apart.

7. Sew the whiskers to the cheeks on the

head.

8. Sew or glue the wings to the back of the

body.

8. Take the assembled head ball and stem,

and insert the exposed wire into the center of
the top of the head. Then sew the open end
of the stem to the head

Finished!
9
Finished Pictures

1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe

10
Finished Pictures

Thank you!
For more patterns, check out my Etsy Shop "1Up Crochet"
1
For free amigurumi patterns visit my blog:
3 www.1upcrochet.com 3
1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpCrochet 1UpAshe

11