Outdoor CPE solutions
█Basical Information
Feature & specification Description
Model Name PhasedFlex 2023
Form Factor ODU
Dimension 209*176*50mm
Weight about 1500g
Color white
Launch time(PP) 2023.4
█ID&MD Model
█Air Interface
Feature & specification Description
Technical Standard 3GPP Release16
Frequency -NA: Region: North America, South America
5G NR :
N2/N5/N12/N13/N25/N28/N30/N38/N41/N48/N66/N71/N77/N78
N258/N260/N261
LTE:
FDD: B2/B4/B5/B7/B12/B13/B17/B25/B26/B28/B30/B66/B71
TDD: B38/B41/B42/B43/B48
WCDMA:
B2/B4/B5
Bandwidth mmWave:
50MHz/100MHz/200MHz
5G NR：
TDD:100/90/80/70/60/50/40/20MHz
FDD:50/40/20/10MHz
4G:20MHz
mmWave SCS bandwidth Sub6G: 15KHz, 30KHz
mmW: 120KHz
Bandwidth DL: 800MHz/UL: 400MHz
Max BW:200MHz/CC
DL CA_Sub6G DL 3NR and 4*4MIMO
See sheet - Sub6G_EA CA
UL CA_Sub6G UL 2NR and 2*2MIMO
See sheet - Sub6G_EA CA
EN-DC_Sub6G DL 6L+ 1NR, DL 5L+ 2NR, LTE 4*4MIMO and NR 4*4MIMO
Not support UL CA and UL 2*2MIMO
See sheet - Sub6G_EA CA
DL SA-DC @ mmW DL 1FR1 + 1FR2, FR1 4*4MIMO
See sheet - mmW_EA CA
UL SA-DC @ mmW UL 1FR1 + 1FR2
See sheet - mmW_EA CA
EN-DC @ mmW DL 6L + 1FR2, LTE 4*4MIMO and NR 2*2MIMO
Not support UL CA
See sheet - mmW_EA CA
DL MIMO DL 4*4 MIMO: N2/N25/N48/N66
DL 2*2 MIMO: N258/N260/N261
UL MIMO UL 2*2 MIMO: N38/N41/N77/N78
N258/N260/N261
Operating Bandwidth FDD: 5MHz, 10MHz, 15MHz, 20MHz, 25MHz, 30MHz, 40MHz
TDD: 10MHz, 15MHz, 20MHz, 30MHz, 40MHz, 50MHz, 60MHz, 80MHz,
90MHz,100MHz
mmW: 50MHz, 100MHz，200MHz
SRS NSA: 1T4R
SA: 2T4R
Band: N38/N41/N77/N78
DL/UL modulation sub6G: DL:256QAM/UL:256QAM
mmW：DL:256QAM/UL:64QAM
4G LTE DL CA Supports DL 7CC CA, See sheet - LTE_EA CA
UL CA Supports Inter band 2CC and Intra band 2CC CA, See sheet - LTE_EA CA
Transmission mode FDD: TM2, TM3 and TM4
TDD: TM2, TM3, TM4, TM7, TM8 and TM9
MIMO DL 4*4 MIMO: B2/B4/B7/B25/B30/66/B41/B42/B43/B48
Operating Bandwidth FDD: 5MHz, 10MHz, 15MHz, 20MHz
TDD: 10MHz, 15MHz, 20MHz
█Performance
Feature & specification Description
Modulation and Demodulation: DL 256QAM, UL 64QAM
Maximum NRDC:Peak Rate: 10.02Gbit/s (DL) and 3.38Mbit/s(UL)
mmWave
Throughput DL: 1CC 200MHz FR1 TDD+8CC 800MHz FR2
UL: 1CC 100MHz FR1 TDD+4CC 400MHz FR2
Modulation and Demodulation: DL 256QAM, UL 256QAM
5G SA:Peak Rate: 4Gbit/s (DL) and 900Mbit/s(UL)
Maximum
5G NR ENDC:Peak Rate: 4.93Gbit/s (DL) and 900Mbit/s(UL)
Throughput
DL: 2CC 200MHz TDD+1CC 40MHz FDD
UL: 1CC 100MHz，TDD 2x2 MIMO
Modulation and Demodulation: DL 256QAM, UL 256QAM
CA: DL 7CC CA and UL inter/intra-band 2CC CA
Maximum
4G LTE CAT: DL CAT20 and UL CAT18
Throughput
FDD Peak Rate: 2Gbit/s (DL) and 200Mbit/s (UL)
TDD (SA2) Peak Rate: 1.4Gbit/s (DL) and 40Mbits (UL)
█Hardware
Feature & specification Description
BB Chipset Qualcomm SDX65
RF Chipset Qualcomm SDR735X2
USIM/SIM 1*4FF SIM (nano card)
Memory 8Gb NAND + 8Gb LPDDR4
Power consumption Maximum Power Consumption: < 60W
Ethernet LAN: 10G*1
Power supply POE(non-standard default)
LED 5G network Indication LED
5G mmWave network Indication LED
4G network Indication LED
ETH status LED
USB USB 2.0 (only for debug)
Antenna Internal Antenna:5G/4G*9， QTM547*4
Gain：700-960<1 dBi 1710-2170<1dBi 2300-2700<1.5dBi 3300-
5000<3dBi
Transmit Power 5G NR:
PC1.5: N41/N77/N78
PC2: N258/N260/N261
PC3: other
4G LTE:
PC2: B41,HPUE
PC3: other
Buttons Reset hole
ESD ESD Protection circuit；8kV contact / 10kV air discharge.
█Software
Feature & specification Description
SW Update Fota & Local Update
APN Support
IP-Passthrough Support
IPv4 Support IPv4
IPv6 Support IPv6
Data Statistics Support
SNTP Support
HTTP Support
HTTPS Support
WebUI Support
TR069 Support
APP BLE APP Support
█Environment
Feature & specification Description
Installation pole/wall
Waterproof level IP65
Operating Temperature -40°C to +50°C
Storage Temperature -40°C to +70°C
Humidity 5%~ 95%
