User Manual of Cross Hair

Cross Hair User Manual

V5.1

Mar, 2018

This manual is the intellectual property of ReaSnow. It must only be published in its
original form. Using parts or republishing altered parts of this document is prohibited
without permission from ReaSnow.

http//www.reasnow.com PAGE 1 / 38
User Manual of Cross Hair

Table of Contents
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
Chapter 1：Introduction: What is Cross Hair
1.1 Advantages
1.2 Technical Specifications
1.3 To know Cross Hair
1.4 Connections

Chapter 2：Setting up Cross Hair

2.1 Simple set up steps
2.2 Basic Settings
2.3 Global Settings
2.4 Setting up in game

Chapter 3：Playing Games

3.1 Things to do before playing
3.2 Ways to Use Cross Hair

Chapter 4：Upgrade and Restoration

4.1 Upgrade firmware and restore configuration
4.2 Repair firmware in REPAIR MODE

http//www.reasnow.com PAGE 2 / 38
User Manual of Cross Hair

Chapter 1：Introduction: What is Cross Hair

Cross Hair aims to provide the best mouse and keyboard control solution for all game
consoles (such as PS4 Pro, PS4 Slim, PS4, PS3, XBOX ONE S, XBOX ONE,XBOX 360,
Nintendo Switch) and the freedom to choose keyboard, mouse, wheel, arcade stick, flight
stick or other controllers as you wish.

For beginners, Cross Hair can give you a smooth and easy experience for playing games
using your own keyboard and mouse. You will not be trouble by the controller which is
used for aiming in most FPS(First-Person Shooting) games.

http//www.reasnow.com PAGE 3 / 38
 User Manual of Cross Hair

For advanced users, it can let you customize the way to play a game,such as tweak
mouse movement, redefine keyboard layout and edit game curve to meet your habit and
conditions.

Cross Hair has 4 working modes, which you should know.

●PLAY MODE: When connecting to game console, controller, keyboard and mouse are
ready, its LOGO will be a breathing color, and then you can play your game.
●PC MODE: When connecting to PC and no USB device plugged into it, its LOGO will be
white, then it can be configured on PC by using Cross Hair Manager. Meanwhile you can
upgrade firmware and restore factory configuration in this mode.
●CONFIG MODE: Any time while playing a game (in PLAY MODE), just press
SHARE+OPTIONS (PS4 platform) keys on your controller to enter this mode and the
LOGO’s light will be turned off in this mode. Then you can change settings and get instant
feed back.
●REPAIR MODE: Hold down the button, then plugging Cross Hair into your PC, when the
LOGO is green, you can then release the button, and a stable green light means REPAIR
MODE. In this mode, Cross Hair’s firmware and configurations can be repaired.

MODE Sound on start Color Function Attached Device

PLAY MODE 1 beep Breathing color Play games Controller, KB, MS
PC MODE 2 beeps White Configure and upgrade NO
CONFIG MODE 3 beeps Black Configure in game Controller, KB, MS
REPAIR MODE 4 beeps Green Repair firmware NO
Please refer to chapter 2.4 for CONFIG MODE details and chapter 4 for REPAIR MODE
details.

Color and Sound：

Mode COLOR BEEP Function
PLAY MODE Breathing color As configured
Black
flash red Higher pitch beep HIP ADD
flash red Lower pitch beep HIP SUB
flash green Higher pitch beep ADS ADD
flash green Lower pitch beep ADS SUB
CONFIG MODE
flash yellow Higher pitch beep Wheel Vibration ADD
flash yellow Lower pitch beep Wheel Vibration SUB
flash blue Higher pitch beep Wheel Angle ADD
flash blue Lower pitch beep Wheel Angle SUB
flash blue Normal beep Key mapping

1.1 Advantages
● Support all platforms: PS4 Pro, PS4 Slim, PS4, PS3, XBOX ONE S, XBOX ONE,XBOX
360,Nintendo Switch
● Mice, Keyboards, Joysticks, steering wheels, arcade sticks, flight sticks compatibility

http//www.reasnow.com PAGE 4 / 38
User Manual of Cross Hair

● Cross platform controller usage (All controllers on any console)

● Intelligent Engine (best mouse precision, 1:1 movement in game)
● Most of the settings can be adjusted on the fly
● Macro support
● Xbox controller/ PS4 Pro/ PS4 Slim controller audio support
● Firmware upgradable
● Active community online
● Seamless aluminum enclosure
● Color and sound indication (clear and convenient)

1.2 Technical Specifications

Outline 75*75*22mm
Net Weight 105g
Platforms PlayStation,Xbox,Nintendo Switch
Configuration 16 configurations, user defined
Color Black
PORT 3 USB ports For controller, keyboard and mouse
1 MINI USB device port Connecting to game console
BUTTON Firmware repair
BEEPER Internal beeper Sound indication
Temperature -10~50℃ (14~122℉)
Humidity Below 90%

1.3 To know Cross Hair

http//www.reasnow.com PAGE 5 / 38
User Manual of Cross Hair

MINU USB: Connect to game console.

USB1: Connect to the genuine official wired controller shipped with game console. As for
wireless controller, just connect it with suitable USB cable to this USB port. The exception
is that Xbox 360 requires a genuine wired Xbox 360 controller.
USB2: Connect to your keyboard, joystick or other controller.
USB3: Connect to your mouse.
BUTTON: Firmware reparation.
LOGO LED: Status indication.
Internal Beeper: Status indication. You do not need to look at Cross Hair and will be
informed of meaning based on the sound.

1.4 Connections (PLAY MODE)

● Firstly, connect controller(USB PORT1) and keyboard and mouse(USB PORT2-3)

to Cross Hair, then connect Cross Hair to console.
USB PORT DEVICE TO BE CONNECTED
USB 1 Official wired controller
USB 2 Keyboard or joystick or other controller
USB 3 Mouse
Please refer to Chapter 3.2 for more connection options.

Chapter 2：Setting Up Cross Hair

2.1 Simple set up steps
2.1.1 Step 1: Connect to PC (PC MODE)

http//www.reasnow.com PAGE 6 / 38
User Manual of Cross Hair

● Please connect your Cross Hair according to this figure, using the USB cable included in
the package. Make sure that there is no peripheral plugged into Cross Hair. And when
Cross Hair LOGO is white, it enters into PC MODE, and can then be configured on PC.

2.1.2 Step 2: Run Cross Hair Manager (Windows OS only)

Run Cross Hair Manager which can be downloaded from http://www.reasnow.com
Please choose the latest version.

2.1.3 Step 3: Choosing console and game

http//www.reasnow.com PAGE 7 / 38
User Manual of Cross Hair

● Choose the game console you are going to use by clicking on the right-arrow button

● If there is already a configuration of the game you want to play, choose the configuration
and click on the “Edit” button, this is the fastest way.
● If there is no existing suitable configuration, just click on the “New” button to add a new
configuration. Make any changes as you see fit.
● If the game you want to play has not been preset, please choose the most similar one.
Or you can choose CUSTOM GAME if you can’t find a similar one.

● Remember to mark the configuration most frequently used as “Start Up”. Click
the configuration first then click on the “Start Up” button. Then this configuration will
be activated automatically every time when Cross Hair is powered on.

If you want to use other configuration instead of the Start-Up one, please press the
corresponding hotkey to activate it.

2.1.4 Step 4: Edit Configuration

For convenience, you can use the default settings, but you should remember the keys’
mapping, while advanced users can choose their favorite settings. For details of every
setting, please refer to chapter 2.2

http//www.reasnow.com PAGE 8 / 38
User Manual of Cross Hair

2.1.5 Step 5: Save and Exit

You should save the configuration first, before exiting Manager, and after that, unplug the
Cross Hair from PC.
Changes you made will not be saved in you Cross Hair until you have clicked on the
“Save” button. Do not shake the USB cable, unplug it, or turn off your PC during the
saving. These behaviors will damage your Cross Hair.

This is the final step before you can enjoy gaming. But if you want to know Cross
Hair better, the following chapters are also very important.

2.2 Basic Settings

2.2.1 Choose platform

By clicking on the right-arrow button, you can choose from PS4/PS3/XBOX ONE/XBOX
360.

2.2.2 Save configuration

Any change made to an existing configuration or made by adding a new one has to be
saved in Cross Hair by this button.

http//www.reasnow.com PAGE 9 / 38
User Manual of Cross Hair

2.2.3 Edit an existing configuration

If you want to change existing configurations, you can use “Edit” button for this purpose.

2.2.4 Add a new configuration

If a new configuration is your choice, just click on the “New” button, and you can then
make detailed changes.

2.2.5 Copy a configuration

If you would like to add a configuration that is similar to an existing one, you can copy a
configuration and make necessary changes.

2.2.6 Delete a configuration

If you want to delete a configuration, click it first and then click on the “Delete” button.

2.2.7 Set a certain configuration as Start Up

Select one configuration first and click on the “Start Up” button. Then this configuration will
be activated automatically every time when Cross Hair is powered on.

2.2.8 Import a configuration from external file

You may import a configuration from external file, which might be an older copy of yours or
a good configuration from other players.

2.2.9 Export a configuration to external file

You may export a configuration before restoring factory configuration, or share your
configuration with other players.

2.2.10 Key mapping

http//www.reasnow.com PAGE 10 / 38
User Manual of Cross Hair

Click the mapped key icon, and you will enter into a mapping dialog as shown below.

http//www.reasnow.com PAGE 11 / 38
User Manual of Cross Hair

Press any button on keyboard or mouse or other peripherals, it will be recognized automatically.

There are 2 ways to do this mapping:

1. Plug peripherals(keyboard and mouse) into PC, and press their buttons.
2. Plug peripherals(keyboard, mouse, wheel, controller, flight stick etc) into USB ports 2 and 3 of
Cross Hair, and then plug Cross Hair into PC, and press their buttons.

● For some peripherals are too complicated to be used on PC, it will be very convenient for users
if buttons on these peripherals can be recognized by Cross Hair directly.
And the second way are the most adaptable one.

● Do not plug any peripheral into USB port 1 of Cross Hair for mapping.

If you would like to cancel a mapping, just click mouse right button on it ,

it will then be changed to “None” .

2.2.11 Change the name you want to use

in this field.

2.2.12 Clicking the color will change the color of LOGO.

http//www.reasnow.com PAGE 12 / 38
User Manual of Cross Hair

This color can indicate which configuration you are using.

2.2.13 Choose the hotkey for this configuration for fast

activation.
Once the hotkey is invoked in PLAY MODE, this configuration will be activated instantly.
Please pay attention to this function. It can not only be used to swap different games but
also to swap different battle modes. Such as, you set up a configuration for infantry in BF4
and you also set up another configuration for tank in BF4 with different keymapping and
HIP/ADS sensitivity. With this function in hand, you can swap different battle modes
instantly during your gaming.

2.2.14 Left/Right Stick Settings

● Choose keys from keyboard or mouse or joystick to replace left and right stick.
● As default, right stick will also be mapped to the mouse movement, mapping keys here
for right stick will not block the mapping to mouse movement.
● Strength percentage for each stick can also be set here.
These two strength percentage settings are only for using buttons on keyboard to act as
left or right sticks and using left or right stick in Macro.

Once the hot key is pressed, settings here will be effective. And when the hot key is
released, the strength of stick will be restored to 100%, the default value.

Strength percentage will have no effect on both the mouse movement and the third-part
controller which is connected to USB port 2 or 3.

2.2.15 Touchpad Settings

http//www.reasnow.com PAGE 13 / 38
User Manual of Cross Hair

Touchpad Button: A suitable key from keyboard or mouse or other devices can be
selected to replace the touchpad button, by default, it’s Tab key from keyboard.
This key is effective once the configuration is activated.

Touchpad Simulation: There are two ways to simulate the touchpad.

1. Use mouse to simulate touchpad. Mouse movement will represent finger’s movement
on touchpad, and the left button of mouse will be used to simulate touchpad button.
2. Use right stick of the third party controller, which is plugged into USB port 2 or 3 to
simulate touchpad. The stick movement will represent finger’s movement on touchpad,
and the R3 button of this right stick will be used to simulate touchpad button.

Please remember we need to choose a hotkey to activate the simulation, and choose a
suitable mode for how the simulation will be activated.

2.2.16 Original controller setting

These settings are dedicated for the original controller, the one plugged into USB
port 1.

● Deadzone: The deadzone here is used to adjust the sensitivity of left and right stick on
the original controller, the one plugged into USB port 1. Leave it as default, if you have no
trouble with the sticks on controller. A smaller value means more sensitivity, but that
sometimes may also causes trouble for controlling. By default, the value is 16.

2.2.17 Third party controller setting

http//www.reasnow.com PAGE 14 / 38
User Manual of Cross Hair

These settings are dedicated for the third-party controller, the one plugged into
USB port 2 or 3.
Such as: Logitech G13, Sony Move Navigation Controller, Logitech Attack3 and other
controllers which are used to replace the original one.

● Deadzone: The dead-zone here is used to adjust the sensitivity of left and right stick on
the third-party controller (Joystick), the one plugged into USB port 2 or 3. Leave it as
default, if you have no trouble with that controller. A smaller value means more sensitivity,
but that sometimes may also causes trouble for controlling. By default, the value is 16.
● Vibration Strength: A bigger value means stronger vibration, a smaller value means
weaker vibration. By default, the value is 10. If it is set to 0, there will be no vibration on the
third-party controller (Joystick).
● Vibration on: As default, we will pass vibration to the third-party controller on USB port
2 or 3, but you have other choice from the pull-down list.

Third Party: Vibration will be passed to the third-party controller on USB port 2 or 3
Original: Vibration will be passed to the Original Controller on USB port 1
None: Vibration will be forbidden on all controllers.

2.2.18 Mouse settings

These settings are dedicated for mouse controlling.

Typically in FPS games, you will have two modes of shooting: HIP and ADS (Aim Down
Sight), so you have to set them separately. The bigger the value, the faster the mouse
movement. You can change them to a suitable value, according to your mouse and game.

http//www.reasnow.com PAGE 15 / 38
User Manual of Cross Hair

Normally, Cross Hair will activate HIP sensitivity, but when the ADS mode is enabled in
game by a corresponding key. The ADS sensitivity will be activated too. This is designed
to improve the control of some weapons with optics.

Please remember to set mouse’s DPI and game’s LOOK sensitivity to maximum first. And
after these two procedures are done, if the mouse is too slow, you need to set HIP and
ADS sensitivity to a bigger value. If the mouse is too fast, you need to set HIP and ADS
sensitivity to a smaller value.

2.2.19 Advanced mouse settings

HIP YX Ratio: It is the ratio of mouse’s speeds in Y and X direction in HIP state.
ADS YX Ratio: It is the ratio of mouse’s speeds in Y and X direction in ADS state.

HIP MIN Speed: while moving the mouse, you will gain a MIN speed in HIP state.
ADS MIN Speed: while moving the mouse, you will gain a MIN speed in ADS state.

ADS delay: You may feel some delay after you press the ADS button(generally right
button of mouse), after that the game will really turn into ADS mode. But your settings for
ADS sensitivity will be effective instantly once you pressed the ADS button. So we add this
delay to keep ADS sensitivity synchronized with the game.

Map left stick X axis to mouse: This feature is used to control helicopter in game, if

http//www.reasnow.com PAGE 16 / 38
User Manual of Cross Hair

enabled, Roll and Yaw will be mapped to mouse left and right movement at the same time.
It’s very useful for helicopter aiming and control.
And the original mapping of left stick to buttons is effective at the same time.

Turning Assistant: When this function is enabled, Cross Hair will hold the direction of the
last mouse movement, reticle on screen will keep moving in this direction even if your
mouse is stopped.
And we need to choose a hotkey to activate this function, and choose a suitable mode for
how it will be activated.

2.2.20 Curve Editor

Relationship between Mouse Speed and Cursor Speed on screen in HIP and ADS modes
can be changed separately by these two curves.

Generally speaking, we will provide straight line in most default configs, they can provide
1:1 mouse movement and cursor movement on screen while using a mouse for aiming,
but you might need a different curve in some games or in some conditions.

For example, if you need faster turning speed, you can change the curve like this:

http//www.reasnow.com PAGE 17 / 38
User Manual of Cross Hair

This curve means it will keep 1:1 nature while mouse speed is low and that makes aiming
easy. And at the same time, when mouse speed is fast, the cursor speed will be boosted.
That will help you to get a faster turning speed, but you will lost 1:1 control for cursor.

● Reset：curve will be reset to its default.

● Import: Import a curve which is exported by you or others.
● Export: Export a curve and save it in your PC.

2.2.21 Steering wheel settings

These parameters are only for racing games in legacy mode!

● Wheel：Choose your wheel from this drop-down menu

● Vibration Strength: A bigger value means stronger vibration on the steering wheel, a
smaller value means weaker vibration on the steering wheel.
● FFB Strength: Force Feedback strength ， A bigger value means stronger feedback
strength on the steering wheel, a smaller value means weaker feedback strength on the
steering wheel.

http//www.reasnow.com PAGE 18 / 38
User Manual of Cross Hair

● Deadzone: A suitable value will eliminate the deadzone of wheel, where you will find no
response in game and provide a good controlling during the racing.
● Angle: Choose a correct working angle according to your wheel’s specification. A bigger
value means the steering wheel is less sensitive in game ， a smaller value means the
steering wheel is more sensitive in game.

For racing games in expert mode

You just need to choose the wheel you are going to use.

2.2.22 Flight Stick settings

Here you can customize flight stick mappings according to game’s settings.
On the left side, they are 4 major axes on flight stick,
on the right side, please select correct mapping for them according to game’s layout.

2.2.23 Primary and secondary mapping

http//www.reasnow.com PAGE 19 / 38
User Manual of Cross Hair

This right-arrow button is used to switch between primary and secondary mapping.
In this way, you can have two options for one key on the original controller.
As default, the secondary mapping is used for a third-party controller. You can change that
to whatever you like.

http//www.reasnow.com PAGE 20 / 38
User Manual of Cross Hair

2.2.24 More settings

This button will bring you to options that are not frequently used.

2.2.25 Notification settings

Maximum Turn Speed indication:

If selected, when turn speed exceeds maximum, the LOGO will flash red twice.
Aim Down Sight indication:
If selected, when ADS is activated, the LOGO will flash green twice.

2.2.26 Flip vertical movement

Once enabled, your mouse’s vertical movement will be flipped.

2.2.27 Aim Down Sight toggle

http//www.reasnow.com PAGE 21 / 38
User Manual of Cross Hair

Once enabled, you can activate ADS sensitivity by clicking the corresponding key, such as
the right key of mouse. And clicking again on the same key will deactivate ADS sensitivity.
You do not need to hold the key all the while.

2.2.28 Key mapping mode

We provide 2 kinds of key mapping mode in CONFIG MODE: 1:1 mode and N:1 mode
By default, the key mapping mode in CONFIG MODE is 1:1 mode. If you enable this
option, it will be N:1 mode.

1:1 mode: It means that one button on the original controller can be mapped into one key
from keyboard or mouse or the third-party controller.
N:1 mode: It means that multiple buttons on the original controller can be mapped into
one key from keyboard or mouse or the third-party controller. It can provide flexibility, but it
will also cause some confusion. For if you are mapping a button on controller to a key on
keyboard in CONFIG MODE in N:1 mode, it will not clear the original mapping of this key,
the original mapping will be kept, and the new mapping will be add to the key. Once this
key is pressed, it will release all the buttons’ functions that are mapped to it at the same
time.

This option will not take effect when you are using Cross Hair Manager to change the
keymappings.

2.2.29 Custom Game options

These 2 options are used only for Custom Game, do not change them in preset games.
Aim Down Sight: ADS function may be invoked by different key on controller, due to
different game and console. If you are using a Custom Game configuration, please select
correct key of ADS.

http//www.reasnow.com PAGE 22 / 38
User Manual of Cross Hair

Deadzone Type: If you are using a Custom Game configuration, please select correct
type of Deadzone according to the game.

2.2.30 Load Behavior

This option will change the behavior of your configuration, after it was activated by hotkey.
There are three choices: Standard, Temporary Hold, and Temporary Toggle.

Standard: The configuration is activated by its hotkey and stays active.

Temporary Hold: The configuration is activated only when its hotkey is pressed and the
previous configuration will be reloaded back when the hotkey is released.
Temporary Toggle: The configuration is activated after its hotkey is invoked and the
previous configuration will be reloaded back when the hotkey is invoked again.

2.2.31 Swap L/R sticks

Once the key is clicked, it will swap the functions of L/R stick. Clicking it again will restore
the original state.

2.2.32 Macro Manager

This button will bring you to the Macro Manager.

http//www.reasnow.com PAGE 23 / 38
User Manual of Cross Hair

Macros can be managed well here, by the buttons on the top of the window, such as: New,
Copy, Delete, Edit, Import and Export.

Choose one Macro and click on the “Edit” button or just double click on the Macro, you will
have the “Edit Macro” window.

Here you can edit your Macro as you see fit. Please remember to choose a Hotkey and a
Mode for this Macro.

http//www.reasnow.com PAGE 24 / 38
User Manual of Cross Hair

2.3 Global Settings

2.3.1 Previous and next configuration

http//www.reasnow.com PAGE 25 / 38
User Manual of Cross Hair

These keys can be an alternative way to activate a configuration instead of the hotkey.

Beside using the original controller, here is the second way to enter and exit Config Mode,
and change HIP/ADS.

2.4 Setting up in game (CONFIG MODE)

We provide our users with this function for the most flexible and comfortable setting
experience. Although everything of Cross Hair can be configured on PC using its Manager,
you will like setting it up in-game, for this procedure will give you instant feed back when

http//www.reasnow.com PAGE 26 / 38
User Manual of Cross Hair

changing the settings.

Any time in PLAY MODE, just press SHARE+OPTIONS （ PS4 platform ） keys on your
controller to enter CONFIG MODE and the LOGO’s light will be turned off in this mode.

Different platform has different keys to use.

Game Console Controller Keys to enter/exit CONFIG MODE
PS4 Dual Shock 4 SHARE+OPTIONS
PS3 Dual Shock 3 SELECT+START
XBOX ONE VIEW+MENU
XBOX 360 BACK+START

In CONFIG MODE, you can use the controller to change HIP and ADS sensitivity as well
as key mapping.

Color and Sound in CONFIG MODE:

KEY COLOR BEEP Functions
D-Pad Up flash red Higher pitch beep HIP ADD
D-Pad Down flash red Lower pitch beep HIP SUB
D-Pad Right flash green Higher pitch beep ADS ADD
D-Pad Left flash green Lower pitch beep ADS SUB
Triangle/Y flash yellow Higher pitch beep Vibration ADD
Cross/A flash yellow Lower pitch beep Vibration SUB
Circle/B flash blue Higher pitch beep Angle ADD
Square/X flash blue Lower pitch beep Angle SUB
flash blue Normal beep Key mapping

After changing settings to you liking, just press the combination keys again, and you will
exit the CONFIG MODE, and return to PLAY MODE. All the changes will be saved in the
activated configuration during the exiting. If you do not exit the CONFIG MODE, all
changes will be lost.

http//www.reasnow.com PAGE 27 / 38
User Manual of Cross Hair

2.4.1 Adjusting HIP sensitivity (CONFIG MODE)

D-Pad Up key is for increasing HIP sensitivity. You will see a flashing red light and hear a
higher pitch sound once the key is pressed.
D-Pad Down key is for decreasing HIP sensitivity. You will see a flashing red light and hear
a lower pitch sound once the key is pressed.

2.4.2 Adjusting ADS sensitivity (CONFIG MODE)

D-Pad Right key is for increasing ADS sensitivity. You will see a flashing green light and
hear a higher pitch sound once the key is pressed.
D-Pad Left key is for decreasing ADS sensitivity. You will see a flashing green light and
hear a lower pitch sound once the key is pressed.

2.4.3 Adjusting Steering Wheel Vibration Strength (CONFIG MODE)

Triangle/Y key is for increasing vibration strength. You will see a flashing yellow light and
hear a higher pitch sound once the key is pressed.
Cross/A key is for decreasing vibration strength. You will see a flashing yellow light and
hear a lower pitch sound once the key is pressed.

http//www.reasnow.com PAGE 28 / 38
User Manual of Cross Hair

2.4.4 Adjusting Steering Wheel Angle (CONFIG MODE)

Circle/B key is for increasing wheel angle. You will see a flashing blue light and hear a
higher pitch sound once the key is pressed.
Square/X key is for decreasing wheel angle. You will see a flashing blue light and hear a
lower pitch sound once the key is pressed.

2.4.5 Mapping keys (CONFIG MODE)

In CONFIG MODE, to begin a key mapping, you should press the PS key (PS4/PS3) or
GUIDE key (XBOX ONE/360). Then the LOGO will show flashing blue. This means you
can choose one key on the controller to be mapped.

Once the key on the controller is pressed, LOGO will show a stable blue light, and a
corresponding key on the keyboard, mouse, joystick, etc should be pressed. After
selecting your key, Cross Hair will keep flashing blue again. Then a new key mapping can
be continued.

Just like the general key’s mapping, if you are planning to use keys on keyboard or mouse
to replace stick on controller, push the stick to its maximum on one direction (such as Up
direction), LOGO will show a stable blue light, and then wait for the corresponding key on
the keyboard, mouse, etc. After selecting your key, Cross Hair will keep flashing blue
again. Then you can continue to map a new direction of this stick.

After mapping all the keys, you can press SHARE+OPTIONS（PS4 platform）keys on your
controller to exit the CONFIG MODE, and end the mapping procedure.

All the changes will be saved in the activated configuration during the exiting. If you do not
exit the CONFIG MODE, all changes will be lost.

Mapping keys in CONFIG MODE is recommended, as you can get instant response
in-game, and all the keys can be mapped. On the contrary, in PC MODE, some special
keys of your mouse, keyboard or joystick may not be detected due to OS's limitations.

It is especially recommended to use CONFIG MODE for mapping keys of joystick or

controller.

Chapter 3：Playing Games

3.1 Things to do before playing

There are still 3 steps before playing

http//www.reasnow.com PAGE 29 / 38
User Manual of Cross Hair

Step 1: Set mouse DPI to Maximum

Step 2: Set sensitivity in game to Maximum
Step 3: Change Cross Hair HIP/ADS

Step 1: Set mouse DPI to Maximum

If you have a configurable mouse, please follow 3.1.1 – 3.1.4.
If you have a mouse which can not be configured, just skip 3.1.1 – 3.1.4.
If your mouse is configurable but have no on-board memory in it that means your
settings will be lost when the mouse is unplugged from PC, remember to set its DPI
to maximum by using the DPI button on it every time you use the mouse with Cross
Hair.

1 Mouse DPI(CPI)
Make sure the mouse you are using is configured at its highest DPI, or you should connect
it to a PC, and use some software from the producer to change the DPI to maximum.
Remember a higher DPI can give you better experience in game.

2 Mouse Report Rate

Set your mouse USB polling rate to 500 or 1000.

3 Mouse Button Function

Buttons of some mouse can be configured. If you want to use them to replace buttons
from controller, you should set them as standard keys of keyboard or mouse, do not set
them as combination keys or special function keys. For example, Ctrl + C, Volume
Up/Down, DPI up/down are all unacceptable.

4 Save to On-Board Memory

Some mice have on-board memory to store DPI and other settings, please remember to
save all these in On-Board Memory.

http//www.reasnow.com PAGE 30 / 38
User Manual of Cross Hair

Other mice have no on-board memory, but their DPI can be adjusted, so you need to set
their DPI to maximum every time powered on.

Step 2: Set sensitivity in game to Maximum

Please set the game’s “SENSITIVITY” or “LOOK SENSITIVITY” to maximum in the game
on game console. It may be called insane, maximum, 10, 20 or 100%.

Step 3: Change Cross Hair HIP/ADS

And if you can accept the turning speed, please choose a value for HIP/ADS as
small as possible to have a fine aiming.

There are 2 ways to change Cross Hair sensitivity.

WAY 1 – using PC software (Manager):

Cross Hair has 2 sensitivities : HIP Sensitivity and ADS Sensitivity

The bigger the value, the faster the mouse movement. You can change them to a suitable
value, according to your mouse and game.

HIP: Shooting without aiming optics

ADS: Shooting with aiming optics

ADS sensitivity is normally bigger than HIP.

http//www.reasnow.com PAGE 31 / 38
User Manual of Cross Hair

YX Ratio:
It’s the ratio of mouse's speed in Y and X directions. Do not change it, unless
you understand its meaning.

WAY 2 – using controller in Config Mode:

http//www.reasnow.com PAGE 32 / 38
User Manual of Cross Hair

1. Any time in game, just press SHARE+OPTIONS（PS4 platform）keys on your controller

to enter CONFIG MODE and the LOGO’s light will be turned off in this mode.
2. Use the D-pad keys on controller to change HIP and ADS sensitivity of Cross Hair.
3. After changing settings to you liking, just press the combination keys again, and you
will exit the CONFIG MODE, and return to PLAY MODE.

Other important things:

● Battery of controller or mouse
Make sure your controller is fully charged and the mouse is also fully charged, if there is
battery in it.
● Controller’s layout in game
Your controller’s layout should be set as default, and change of these will confuse Cross
Hair.

http//www.reasnow.com PAGE 33 / 38
User Manual of Cross Hair

3.2 Ways to Use Cross Hair

Connect all devices (controller/keyboard/mouse etc) to Cross Hair first, and then
connect Cross Hair to game console.
1. Use keyboard and mouse

2. Use joystick and mouse

http//www.reasnow.com PAGE 34 / 38
User Manual of Cross Hair

3. Use another controller (Cross platform controller usage)

4. Use steering wheel

http//www.reasnow.com PAGE 35 / 38
User Manual of Cross Hair

The controller connected to USB 1 should always be the original one shipped with
the console.

Only official controllers are tested and recommended!

Supported Controller:
Game DS3/ XBOX ONE XBOX 360
DS4
Console Sixaxis CONTROLLER CONTROLLER
PS4 ● ● ●
PS3 ● ● ●
XBOX ONE ● ● ●
XBOX 360 ● ● ●

● Connect all devices to Cross Hair first, and then connect Cross Hair to game
console. That is the procedure we recommend. Change your connection only when
Cross Hair is powered off.

● Wireless controller of XBOX 360 can not be used as wired controller with a USB
cable connected on it. For the USB port on this controller can only be used for
charging, no data lines in this port. While all other wireless controllers can be used
as wired ones with a USB cable connected, such as controllers of PS4, PS3, XBOX
ONE.

For PS4 console:

● For PS4 users, please do remember to log out all the users and turn off the
controller before connecting.

● After Cross Hair is powered on, it will turn the controller on automatically. Do not
turn the controller off when LOGO of Cross Hair is breathing.

Chapter 4：Upgrade and Restoration

4.1 Upgrade firmware and restore configuration
Please connect your Cross Hair according to the figure below, using the USB cable
included in the package. Make sure there is no peripheral plugged into it. When the
Cross Hair LOGO is white, it enters into PC MODE, and can then be upgraded and
restored on PC.

http//www.reasnow.com PAGE 36 / 38
User Manual of Cross Hair

Click the icon at the bottom right corner of the screen.

Upgrade Firmware: Upgrade firmware to a newer version or repair firmware errors. Your
configurations will not be changed after the operation.

http//www.reasnow.com PAGE 37 / 38
User Manual of Cross Hair

Restore Factory Configuration: Restore configuration back to factory default. All your
own changes will be lost.

4.2 Repair firmware in REPAIR MODE

If Cross Hair works improperly, you may try repairing its firmware as stated below.

Hold down the hidden button with a toothpick or the tip of a pen, and then plug Cross Hair
into your PC. When the LOGO is green, you can release the button. A stable green LOGO
means your Cross Hair is in REPAIR MODE. In this mode, it can be repaired. The
procedure is the same as firmware upgrade and restore factory configuration.

Please try both upgrading firmware and restoring factory configuration, so you will get a
completely clean system.

After these two procedures, most of the problems can be solved.

During upgrading or restoring, do not shake the USB cable, unplug it, or turn off
your PC. These behaviors will damage your Cross Hair.

http//www.reasnow.com PAGE 38 / 38