DATA SHEET: Version 2010-02-01
Hardox 600
Page. 1 (2)
ABRASION RESISTANT PLATE
Hardox 600 is an abrasion resistant plate with a hardness of 600 HBW, intended for applications requiring an extremely high
abrasion resistance.
Applications Liners, cutters, feeders, chutes, shredders, hammers, knives etc.
Chemical Composition
(ladle analysis) Plate C Si Mn P S Cr Ni Mo B CEV CET
thickness max max max max max max max max max typv. typv.
mm % % % % % % % % %
8– 30 0,45 0,7 1,00 0,015 0,010 1,2 2,5 0,8 0,004 0,73 0,55
(30)– 50 0,47 0,7 1,00 0,015 0,010 1,2 2,5 0,8 0,004 0,84 0,59
CEV = C + Mn + Cr + Mo + V + Cu + Ni
6 5 15
CET = C + Mn + Mo + Cr + Cu + Ni
10 20 40
The steel is grain refined.
Hardness HBW
570-640
Impact Properties Test Impact energy
Typical value for temperature Charpy-V, longitudinal
20 mm plate thickness °C J
-40 (-40 F) 20
Testing Brinell hardness, HBW according to EN ISO 6506-1, on a milled surface 0,5–3 mm below plate surface
per heat and 40 tons. Tests are made for every variation of 15 mm in the thickness of plates from the
same heat.
Delivery Conditions Q.
Dimensions H a rdox 6 0 0 is su p p l i e d i n p l ate t h i c k n esses of 8 -5 0 m m . M o re d eta i l e d i nfo r mati o n o n
dimensions is provided in our brochure 41-General product information Weldox, Hardox, Armox and Toolox-UK.
Tolerances Thickness tolerances according to SSAB Oxelösund thickness precision guarantee AccuRollTechTM.
- AccuRollTechTM meets the requirements of EN 10 029 Class A, but offers more narrow tolerances.
More detailed information is given in our brochure 41-General product information
Weldox, Hardox, Armox and Toolox-UK.
According to EN 10 029.
- Tolerances on shape, length and width.
- Tolerances on flatness according to Class N (Normal tolerances).
www.hardox.com
DATA SHEET: Version 2010-02-01
Hardox 600
Page. 2 (2)
Surface Properties According to EN 10 163-2
- Requirements according to Class A.
- Repair welding is not allowed.
General Technical According to our brochure 41-General product information Weldox, Hardox, Armox and Toolox-UK.
Delivery Requirement
Heat Treatment and Hardox 600 has obtained its mechanical properties by quenching and when necessary by
Fabrication means of subsequent tempering. The properties of the delivery conditon can not be
retained after exposure to service or preheating temperatures in excess of 250˚ (480˚F).
Hardox 600 is not intended for further heat treatment.
For information concerning welding and fabrication, see our brochures on www.hardox.com
or consult our Technical Customer Service.
Appropriate health and saftey precautions must be taken when welding, cutting, grinding or
otherwise working on the product. Grinding, especially of primer coated plates, may produce
dust with high particle concentration. Our Technical Customer Service Department will provide
further information on request.
159-UK, Hardox is a registered trademark of SSAB Oxelösund AB, Sweden.
The UK English version of this document shall prevail in case of discrepancy.
Download the latest version of this document on internet: www.ssab.com
SSAB Oxelösund AB, 613 80 Oxelösund, Sweden, +46 155 25 40 00, www.ssab.com
www.hardox.com
