ARDEX
SYSTEM
SOLUTIONS
Architects, Interior Designers and Engineers
TILE & STONE INSTALLATION SYSTEMS
ARDEX German-engineered products are recognized
around the world as the innovation and performance
leader for tile and stone installation systems.
UNCOUPLING SYSTEMS
ARDEX UI 720TM FLEXBONE®
Floating Uncoupling Membrane
• Loose lay uncoupling system designed to help prevent cracks in
grout joints and tile from substrate movement
• Offers 100% uncoupling ability
• Perfect for use over difficult substrates
• Easy removal of tile for frequently changed floor coverings
WATERPROOFING
ARDEX 8+9TM
Rapid Waterproofing and Crack Isolation Compound
• ANSI 118.10 and 118.12
US BANKCORP TOWER • Crack isolation up to 1/8” (3mm)
• IAPMO approved shower pan liner
PORTLAND, OREGON
• Interior and exterior floors and walls
ARDEX K 60™ ARDITEX
ARDEX X 77™ MICROTEC®
ARDEX ARDIFIX™
ARDEX DS 70™
ARDEX S 1-KTM
ARDEX 8+9™ One-Component Waterproofing and Crack
ARDEX FL™ Isolation Membrane
ARDEX WA™ • ANSI 118.10 and 118.12
ARDEX SX™ • Single component, load-bearing waterproofing
• Flexible, topside waterproofing for interior floors and walls
• Use for bathrooms, showers and other wet areas prior to the
installation of tile
SELF-LEVELING
ARDEX Liquid BackerBoard®
BILLY BISHOP TORONTO Self-Leveling Underlayment for Interior Wood and
CIT Y AIRPORT Concrete Subfloors
TORONTO, CANADA • Portland cement-based self-leveling compound recommended to
ARDEX X 77™ MICROTEC® smooth and level interior wood, concrete, terrazzo and ceramic
ARDEX X 4™ tile substrates up to 1 1/4” (32mm) thick
ARDEX FL™ • Use over in floor heating systems
• Install tile and stone in as little as 6 hours
ALSO AVAILABLE
ARDEX UI 740™ FLEXBONE® Uncoupling Membrane ARDEX SK 175™ Waterproofing Membrane and Vapor Retarder for Tile & Stone Installations
ARDEX TL 1000™ Self-Leveling Underlayment ARDEX P 51™ Primer
ARDEX AM 100™ Rapid Set Pre-Tile Smoothing and Ramping Mortar ARDEX SX™ 100% Silicone Sealant for Tile and Stone Applications
TILE & STONE MORTARS GROUTS
ARDEX X 5TM ARDEX FLTM
Flexible Tile and Stone Mortar Rapid Set, Flexible, Sanded Grout
• ANSI 118.4 and 118.11 • ANSI 118.7
• Everyday solution for tile and stone installations • Installed in grout joints from 1/16” to 1/2” (1.5 mm to 12 mm)
• Formulated as a medium bed, LHT/LFT mortar • Interior and exterior floor and wall
• Interior and exterior floor and wall surfaces • Ideal for commercial, residential, swimming pools & other wet areas
ARDEX X 77TM ARDEX WATM
MICROTEC® Fiber Reinforced Tile and Stone Mortar High Performance, 100% Solids Epoxy Grout and Adhesive
• ANSI 118.4, 118.11 and 118.15 • ANSI 118.3
• Ideal for high traffic and demanding environments • For areas requiring high standards of hygiene and chemical
• Formulated for tile and stone, and gauged porcelain tile and slab resistance
• Highly flexible with excellent sag resistance • Interior, exterior and submerged applications for both floor and
• Interior and exterior floor and wall surfaces wall surfaces
• Solvent free, low VOCs and UV stable
• Available in 35 colors
ARDEX X 90 OUTDOORTM
MicroteC3 Rapid-Set, Flexible Tile and Stone Mortar
• ANSI codes 118.4, 118.11 and 118.15
• Highest levels of freeze/thaw resistance
• Maximum efflorescence resistance
• Cures at temperatures as low as 40˚F/5˚C
• Withstands driving rain in as little as 2 hrs
NEMACOLIN WOODLANDS
FALLING ROCK POOL
FARMINGTON, PENNSYLVANIA
ARDEX 8+9™
ARDEX SK MESH™
ARDEX X 32™ MICROTEC®
ARDEX WA™
ARDEX SX™
ALSO AVAILABLE
ARDEX N 23™ MICROTEC® Rapid Set Natural Stone and Tile Mortar ARDEX S 28™ MICROTEC® Rapid-Set, Rapid-Dry, Super-Format Tile and Uncoupling Membrane Mortar
ARDEX X 7 R™ Rapid Set, Flexible Tile and Stone Mortar ARDEX FG-C™ MICROTEC® Unsanded Grout
FOR A COMPLETE PRODUCT LISTING VISIT: WWW.ARDEXAMERICAS.COM
POLISHED CONCRETE SYSTEMS
Green benefits and lower life cycle costs are just a few reasons why the industry is trending toward concrete
finished surfaces. Suitable for commercial, light industrial and residential applications, ARDEX provides high-performing
products that allow for a wide array of finished surfaces.
ARDEX PC-TTM ARDEX K 521TM
Polished Concrete Topping Self-Leveling Concrete Topping with Aggregate Surface
• Self-Leveling Portland cement- based topping, designed to • Self-leveling Portland cement-based topping, designed to provide a
provide a polished concrete surface polished concrete surface with exposed aggregate
• Installed over interior concrete substrates • Installed over interior concrete substrates
• High compressive strength 6100 psi (42 MPa) • High compressive strength 6800 psi (47 MPa)
• Installed from 3/8” to 2” neat (9 mm to 50 mm) • Installed from 3/8” to 2” neat (9 mm to 50 mm)
• Available in white, gray and light gray • Available in gray
BEFORE
ALSO AVAILABLE
ARDEX PC 10™ Lithium Hardener for PC-T™ Polished Concrete Topping ARDEX ARDIFIX™ Low Viscosity Rigid Polyurethane Crack & Joint Repair
ARDEX PC 50™ Lithium Hardener Densifier for Standard Concrete ARDEX ARDISEAL™ RAPID PLUS Semi-Rigid Joint Sealant
ARDEX PC FINISH™ Stain & Wear Protection – High Gloss
CONCRETE TOPPINGS/DESIGNER FLOORS
Our designer floors provide a fresh concrete surface
with numerous design opportunities for architects
and designers to add color, patterns and logos
for their commercial, light industrial and residential
floor applications.
ARDEX SD-T®
Self-Drying, Self-Leveling Concrete Topping
• Self-drying, self-leveling Portland cement-based wear surface
topping recommended to smooth and level interior concrete
• Installed from 1/4” to 2” neat (6 mm to 50 mm), 5” (127 mm)
with aggregate
• High compressive strength 6100 psi (42 MPa)
• Available in gray and white, can be stained and integrally dyed
ARDEX SD-MTM
Designer Floor FinishTM
• Trowelable Portland cement-based wear surface topping applied
to interior concrete, terrazzo and existing tile substrates
• Installed from a featheredge to 1/16” (1.5 mm)
• High compressive strength 5000 psi (34 MPa)
• Available in gray and white, can be stained and integrally dyed
CORPORAT E OFFICE
CHICAGO, ILLINOIS
INSTALLED BY MTH INDUSTRIES, INC.
ARDEX SD-T™
T RAINING ACADEMY BIST RO
STOCKTON, CALIFORNIA
ARDEX SD-M™
ARDEX PANDOMO® W1
ALAMEDA DATA SERVER PROJECT
LOS ANGELES, CALIFORNIA
ARDEX PC-T™
ARDEX PC 10™
ARDEX PC FINISH™
ARDEX ARDIFIX™
ARDEX EP 2000™
ALSO AVAILABLE
ARDEX EP 2000™ Substrate Preparation Epoxy Primer ARDEX K 520™ Self-Leveling Concrete Topping
ARDEX P 51™ Primer
FOR A COMPLETE PRODUCT LISTING VISIT: WWW.ARDEXAMERICAS.COM
MOISTURE CONTROL
Our complete line of moisture control products are fast-
track solutions backed by industry-leading warranties.
ARDEX VR 98TM
Fast-Track, One-Component Moisture Vapor Retarder
• One-component, water-based, two-coat system formulated to
suppress residual moisture in concrete
• For RH readings up to 98%
• Install underlayments in as little as 2 hours after the second coat
ARDEX MCTM RAPID
One-Coat Moisture Control System for Concrete to Receive
ARDEX Products
• One-coat, 100% solids epoxy moisture management system used
to suppress excessive moisture vapor emissions in new or existing
concrete
• For RH readings up to 100%
• ASTM E96 – 0.06 perms
AMIT Y FIREHALL (INSTALLAT ION)
WASHINGTON, PENNSYLVANIA
ARDEX VR 98™
HENRY® 430 ClearPro™
HENRY ®
The W.W. HENRY Company, a division of ARDEX Americas, is one of the world’s largest manufacturers of
adhesives for all types of flooring installations. HENRY focuses on producing GreenLineT M adhesives, which reduce the
environmental impact associated with flooring adhesives. HENRY products are backed by unmatched customer service,
expert technical support and a comprehensive warranty program.
HENRY® 695 HENRY® 650 R
High RH Vinyl Flooring Adhesive Releasable Bond Pressure Sensitive Adhesive
• Ideal for installation of LVT, plank and vinyl-backed sheet flooring • Ideal for the installation of fiberglass-reinforced sheet vinyl flooring,
• Moisture resistant up to 95% RH solid vinyl tile (LVT), solid vinyl plank (LVP), vinyl-backed sheet
• Use as a pressure-sensitive or wet-set adhesive flooring and vinyl-backed carpet tile
• Solvent-free, low odor and low emissions • Moisture resistant up to 90% RH
• Solvent-free, non-flammable
• Releasable or permanent installations
ALSO AVAILABLE
HENRY® 430 ClearPro™ Clear VCT Floor Adhesive HENRY® 1171N SureLock™ Acrylic Urethane Wood Flooring Adhesive
HENRY® 440 Cove Base Adhesive HENRY® 412 Rubber Flooring Adhesive
FOR A COMPLETE PRODUCT LISTING VISIT: WWW.WWHENRY.COM
SUBFLOOR PREPARATION
ARDEX pioneered self-leveling underlayments in the marketplace and revolutionized the industry. Today our self-
levelers are the industry benchmark with innovative, self-leveling solutions that perform in any environment.
ARDEX K 15® ARDEX K 60TM ARDITEX
Premium Self-Leveling Underlayment Rapid Setting Latex Smoothing and Leveling Compound
• Portland-cement based self-leveling compound recommended to • Portland-cement based self-leveling compound recommended to
smooth and level interior concrete, terrazzo, ceramic and quarry smooth and level concrete, terrazzo, wood, ceramic and quarry
tile, epoxy coating systems, wooden and metal substrates tile, steel and select epoxy coating systems
• Installs up to 1 1/2” neat (38 mm), 5” (127 mm) with aggregate • Installs from 1/16” to 1/2” (1.5 mm to 12 mm)
• Floorcovering can be applied in 16 hours, moisture-insensitive tile • Mixed using a latex additive, no water required for mixing
and stone in 6 hours • No mechanical profiling or priming needed in most applications
ARDEX V 1200TM ARDEX K 22 FTM
Self-Leveling Underlayment High Flow, Fiber Reinforced, Self-Leveling Underlayment
• Portland-cement based self-leveling compound recommended to • Blend of gypsum and Portland cement-based recommended to
smooth and level concrete, terrazzo, ceramic and quarry tile, and smooth and level above-grade floors
epoxy coating systems • Use over concrete, gypsum, wood, and well-bonded VCT
• Installs up to 1 1/4” (32 mm) neat • Installs up to 1 1/4” (32 mm) neat and 2” (50 mm) with aggregate
• Floorcovering can be applied in 24 hours, moisture-insensitive tile • Floorcovering can be installed in as little as 24 hours
and stone in 6 hours
ALSO AVAILABLE ANN & ROBERT H. LURIE
ARDEX FEATHER FINISH Self-Drying, Cement-Based Finish Underlayment
® CHILDREN'S HOSPITAL OF CHICAGO CHICAGO, ILLINOIS
ARDEX K 10™ Reactivatable™, High-Flow, Self-Leveling Underlayment ARDEX FEATHER FINISH® (1 million sq. ft.)
ARDEX K 15®, ARDEX SD-P®, ARDEX MC™ ULTRA, ARDEX ERM™
FOR A COMPLETE PRODUCT LISTING VISIT: WWW.ARDEXAMERICAS.COM
ARDEX CONCRETE MANAGEMENT SYSTEMS (ACMS)
TM
ACMST M is a ground-breaking, specified finishing
method for new concrete construction which
addresses challenges like moisture, flatness and
levelness. It is comprised of seven steps (listed
below), and includes an integrated system of moisture
control and self-leveling underlayment products.
ACMS overcomes challenges that arise during
construction due to the disparity between Division 3
(concrete) and Division 9 (finishes) and can narrow
the slab curing time to just a few days.
The ACMS rough screed process option can be
combined with the ARDEX ARDIFLOT M pumping
system to allow you to meet the most demanding
flatness and levelness tolerances for flooring.
INOVA WOMEN AND
CHILDREN'S HOSPITAL
FALLS CHURCH, VIRGINIA
ACMS™ Place Consolidate Strike Off
ARDEX V 1200™
ARDEX ARDIFIX™
ARDEX ARDISEAL™ RAPID PLUS
AMP® 200
Rover®
Float/ Wet Cover/ Moisture Self-Leveling
Restraighten Chemical Cure Control Underlayment
FOR A COMPLETE SYSTEM OVERVIEW VISIT: WWW.ARDEXACMS.COM
ENGINEERED CONCRETE REPAIR SYSTEMS
Comprehensive restoration capabilities for structural
and non-structural repairs including: exterior wear
surface repair and restoration, horizontal, vertical and
overhead repairs, crack repair and joint sealing.
BEFORE
STRUCTURAL REPAIR MORTARS
ARDEX ERMTM Exterior Ramp Mortar
Trowel-Grade Horizontal Concrete Repair Mortar
• Portland cement-based, trowel-grade, structural repair mortar
used to repair interior and exterior concrete surfaces
• Holds shape for repairing ramps and balconies
• Installs from 1/4” to 2” (6 mm to 51 mm) and up to 8” (203 mm)
with the addition of aggregate
• Freeze thaw resistant
ARDEX TRMTM Transportation Repair Mortar
Fast-Setting Horizontal Concrete Repair Mortar
• Fast-setting formable, pourable, pumpable Portland cement based
structural repair mortar for interior and exterior concrete repair PRIVAT E RESIDENCE
• Allows foot traffic in 2 hours PITTSBURGH, PENNSYLVANIA
• Installs from 1/2” to 4” (6 mm to 102 mm) neat, 8” (203 mm) ARDEX CP™
with aggregate ARDEX CD™
ARDEX CG Concrete Guard™
ENGINEERED TOPPINGS
ARDEX CDTM
Concrete Dressing
• Portland cement based concrete resurfacing compound
• Used to produce a new wear layer over existing concrete and fill in
small spalls and gouges
• Ideal for sidewalks, patios, driveways parking garages or various
exterior concrete applications SAN FRANCISCO
• Available in gray with fine or coarse aggregate, can be stained and INT ERNAT IONAL AIRPORT
integrally colored (DEPART URE AREA
SIDEWALK REPAIR)
ARDEX TWPTM SAN FRANCISCO, CALIFORNIA
ARDEX CD FINE™
Tilt Wall Patch and Finishing Compound for Vertical
Concrete Walls
• Portland cement based patch used for filling and smoothing
interior and exterior vertical concrete and masonry surfaces
• Hardens quickly without shrinking
• Can be sealed or painted immediately after surface hardens
ALSO AVAILABLE
ARDEX BACA™ Bonding & Anti-Corrosion Agent ARDEX OVP™ Finishing Compound for Overhead and Vertical Concrete Walls
ARDEX B 20™ Overhead & Vertical Repair Mortar with Corrosion Inhibitor ARDEX FDM™ Full Depth Repair Mortar Concrete Repair Mortar with Corrosion Inhibitor
FOR A COMPLETE PRODUCT LISTING VISIT: WWW.ARDEXAMERICAS.COM
SAMPLE ARDEX SYSTEMS
Polished Topping Sample System Wood Floor Sample System
ARDEX PC FinishTM Wood flooring
ARDEX PC 10TM HENRY® 1171N SureLockTM
ARDEX PC-T TM
ARDEX V 1200TM
ARDEX EP 2000 TM
ARDEX P 51TM
Concrete subfloor Concrete subfloor
Bathroom Floor Sample System Shower Wall Sample System
ARDEX FLTM ARDEX WATM
Tile Glass tile
ARDEX X 78 TM
ARDEX X 77TM
ARDEX UI 740 TM
FLEXBONE
®
ARDEX 8+9
TM
with SK MESHTM
ARDEX AF 207 TM
Cement backerboard
Plywood subfloor
ARDEX SXTM
The vision of the ARDEX Group is to be one
of the world’s leading solution providers of
high-performance specialty building materials.
PERFORMANCE
ARDEX is a system solution provider of high-performance specialty building
materials. We will be the premium supplier in each of our segments. We strive for
market leadership in defined markets worldwide.
FAMILY-OWNED BUSINESS
As a family-owned company we encourage the development of team spirit and
identification with the culture of the business. We are proud of our history.
ENVIRONMENTAL COMMITMENT
The ARDEX Group has committed to building a better future by reducing our
carbon footprint and maximizing our sustainability in areas of product development,
manufacturing and consumer health and safety.
WARRANTY
We stand behind all of our products with industry-unique warranty systems to
include products and labor costs.
ARDEX Americas ARDEX Canada
400 Ardex Park Drive 2400 Lucknow Drive Unit 33
Aliquippa, PA 15001 Mississauga, Ontario L5S 1T9
p: 724-203-5000 p: 905-673-2739
www.ardexamericas.com
www.ardex.ca
[email protected]
