LOCATION:MALL OF QATAR

MATERIAL APPROVAL REQUEST (MAR)

Project Name From : Marshalscale Engineering MAR No. . ELE 01 Rev. 00

FF 112A, 112B- SHOE BOX NEW YORK @

MOQ To : AL-KASHAF INTERNATIONAL Date Submitted : 18-05-2024

Submittal Contents

Material / Sample Catalogue / Brochure Others

Trade / Discipline
Structural & Architectural Fire Fighting Electrical
HVAC Plumbing Fire Alarm

Submission Description
GI CONDUITS

Manufacture / Supplier Details

Local Supplier / Agent Manufacture Country of Origin

BARTON UK

CONTRACTOR'S REVIEW
Prepared by : Recommended for Approval by : (Contractor's PM) Stamp

Eng. LINTA KELVIN Eng. ABDUL KADAR

Name / Sign / Date: 18-05-2024 Name / Sign / Date: 18-05-2024
NOTE: We certify that the document submitted herewith have been reviewed in details and are in strict confirmance with the contract documents, drawings and specifications
except as other wise stated.

COMMENTS BY THE CONSULTANT SUBMITTAL REVIEW STATUS

APPROVED

APPROVED AS NOTED

REVISE AND RESUBMIT

REJECTED

SUPERVISION CONSULTANT'S SIGNATURE

For & On behalf of AL-KASHAF INTERNATIONAL

Eng.

Name / Sign

Date
 BAR ON

THE COMPANY STANDARDS

Since 1983 Barton has been a subsidiary of Caparo Industries Barton products are generally manufactured in accordance with
plc, a broad based group with interests in engineering and steel. the relevant British Standards. Details of particular standards are
given below:
Barton Engineering is a division of Caparo Precision Tubes Ltd.
Product British and European
Operations have been transferred to Caparo's Oldbury site in the
(Euro Norme) Standards
West Midlands which houses the UK's largest capacity precision
tube mill. Conduit – steel BS 4568 part 1
BS EN 50086-1:1994 EN61386 part 21
THE QUALITY and
Products listed in this brochure are either manufactured by BS EN 50086-2:1996 Metric sizes
Barton Engineering under a certified ISO 9000 system, or are BS 31 Imperial sizes
manufactured by our suppliers under a certified ISO system or Conduit Fittings BS EN 50086-1:1994
have their quality assured to the same level by rigorous & Accessories and
inspection at Barton Engineering. BS EN 50086-2:1996 Metric sizes
BS 31 Imperial sizes
ISO 9000 systems involve a complete set of working practices,
Adaptable Boxes BS 4568 part 2
disciplines and procedures – implemented at each stage of the
manufacturing programme, from raw material inspection through Conduit – Flexible BS EN 50086-2-3:1996 EN61386 part 23
to final despatch. Switch and Socket Boxes BS 4662

As a result, all Barton products satisfy a uniform standard of In keeping with clause 511-01-01 of BS 7671:2001 of the 17th
quality and safety. Edition of the I.E.E. Wiring Regulations, every item of the equipment
listed above complies with the relevant requirements of the
current edition of the applicable British and European Standards.
THE SERVICE
Barton provide a highly efficient customer service operation. Barton Engineering's operations are subject to a continuing
Fully trained, specialist sales personnel working with assessment programme by BSI Management Systems UK which
computerised equipment provide accuracy, precision and speed confirm compliance with BS EN ISO 9001:2000 certificate No
at all times. FM515299.

1
2
CONDUIT STEEL

Please Note: 1. Pre-galvanised conduit does not meet the requirements of BS 4568.
It does not meet corrosion classifications defined in this standard.

2. Binding materials used to make up bundles of Conduit are not intended to be

used when lifting this product which should be handled only with approved slings.

External No. of lengths No. of bundles Metres Approx. weight per

Diameter per bundle per lift per lift lift Tonnes
BS 4568/BS EN 50086/
BS EN 61386 Part 1
20mm 8 50 1500 1.16
Class 4 finish
HOT DIPPED GALVANISED 25mm 8 40 1200 1.17
HEAVY GAUGE CONDUIT
INSIDE & OUTSIDE 32mm 4 41 615 0.80
WELDED – SCREWED 3.75 metre lengths
Manufactured in accordance
with BS 31/BS 4568/BS BS 31 Class 4 finish
6053/BS 6099 (I.E.C. 614) HOT DIPPED GALVANISED 11/2” 4 21 315 0.54
where applicable. Each 3.75 INSIDE & OUTSIDE 2” 4 21 315 0.85
metre length screwed both 3.75 metre lengths
ends and complete with one
solid coupling. PRE-GALVANISED
INSIDE & OUTSIDE 20mm 8 50 1500 1.09
3.75 metre lengths 25mm 8 40 1200 1.11

BS 4568/BS EN 50086/
BS EN 61386 Part 1
Class 2 finish 20mm 8 50 1500 1.16
BLACK ENAMELLED 25mm 8 40 1200 1.17
INSIDE & OUTSIDE 32mm 4 41 615 0.80
3.75 metre lengths
BS 31 Class 2 finish
BLACK ENAMELLED 11/2” 4 21 315 0.54
INSIDE & OUTSIDE 2” 4 21 315 0.85
3.75 metre lengths

Above conduit is packed and shipped in LIFTS (also known as Master Bundles). Each lift comprising the stated number of individual bundles
measuring approximately 45-50 centimetres in diameter and 3.75 metres long. The weight varies according to size and finish of conduit
but approximate weights are shown above.

Length
CONDUIT DIAMETER, MM
of
run 16 20 25 32 16 20 25 32 16 20 25 32 16 20 25 32 16 20 25 32
Metres Straight One bend Two bends Three bends Four bends
1 188 303 543 947 177 286 514 900 158 256 463 818 130 213 388 692
1.5 Covered by 182 294 528 923 167 270 487 857 143 233 422 750 111 182 333 600
2 Tables 177 286 514 900 158 256 463 818 130 213 388 692 97 159 292 529
1 and 2
2.5 171 278 500 878 150 244 442 783 120 196 358 643 86 141 260 474
3 167 270 487 857 143 233 422 750 111 182 333 600
3.5 179 290 521 911 162 263 475 837 136 222 404 720 103 169 311 563
4 177 286 514 900 158 256 463 818 130 213 388 692 97 159 292 529
4.5 174 282 507 889 154 250 452 800 125 204 373 667 91 149 275 500
5 171 278 500 878 150 244 442 783 120 196 358 643 86 141 260 474
6 167 270 487 857 143 233 422 750 111 182 333 600
Table 4 7 162 263 475 837 136 222 404 720 103 169 311 563
Conduit factors 8 158 256 463 818 130 213 388 692 97 159 292 529
for runs 154 250 452 800 125 204 373 667 91 149 275 500
9
incorporating
10 150 244 442 783 120 196 358 643 86 141 260 474
bends
4
CONDUIT STEEL BAR ON

CABLE CAPACITIES OF CONDUIT SPACING OF SUPPORTS FOR CONDUITS

The following tables give guidance on the calculation of the The following table gives guidance on the spacing of supports
number of single-core p.v.c insulated cables which can be located for conduit.
in various sizes of conduit.
Nominal size Maximum distance between supports
The tables deal with two particular cases.
of conduit Horizontal runs Vertical runs
(i) Single-core p.v.c. insulated cables in straight runs not mm m m
exceeding 3 metres in length.
(ii) Single-core p.v.c. insulated cables in straight runs exceeding 16mm 0.75 1.0
3 metres in length or in runs of any length with bends or sets. 17mm – 25mm 1.75 2.0
26mm – 40mm 2.0 2.25
STRAIGHT RUNS NOT EXCEEDING Over 40mm 2.25 2.5
3 METRES IN LENGTH.
This table is based on the 17th edition of the I.E.E. Wiring
For each type of cable being used obtain the cable factor from Regulations Appendix 11.
Table 1. Sum all the cable factors and compare with the conduit These tables are for guidance only and account needs to be
factors given in Table 2. taken of future wiring needs.

The conduit sizes which will accommodate the cables are those
with a conduit factor equal to or greater than the sum of the cable STOCKS, DIES, GUIDES
factors. Complete set Comprising Stock, Dies and Guides.
These tables are based To screw conduit dia. of 16mm up to 2”.
Type Conductor on the 17th edition of the
SD2025 Complete set comprising stock,
of cross-sectional I.E.E. Wiring Regulations dies and guides for 20mm and
conductor area mm2 Factor Appendix 12. 25mm Conduit. Overall Dia. of
Dies 42mm.
1 22 SD32 Complete set comprising stock, die
Solid 1.5 27 and guide for 32mm Conduit.
Overall Dia. of Die 63.5mm
2.5 39 Conduit Factor SD3850 Complete set comprising stock, dies and guides for 11/2’’ and 2” Conduit.
dia mm Overall Dia. of Dies 31/2”.
1.5 31
2.5 43 16 290 Stock – Spare
Stranded 4 58 20 460 Overall Dia. of Die
ST42 Stock 42mm
6 88 25 800 ST64 Stock 63.5mm
10 146 32 1400
Table 1 Cable factors for short Table 2 Conduit
Die – Spare Steel
straight runs factors for short
straight runs Overall Dia. of Die
DE16 16mm Die 42mm
DE20 20mm Die 42mm
STRAIGHT RUNS EXCEEDING 3 METRES DE25 25mm Die 42mm
DE32 32mm Die 63.5mm
IN LENGTH OR RUNS OF ANY LENGTH DE38 11/2” Die 31/2”
DE50 2” Die 31/2”
INCORPORATING BENDS OR SETS.
For each type of cable being used obtain the cable factor
from Table 3. Guide – Spare Steel
Overall Dia. of Die
Sum all the cable factors and compare with the conduit factor GE16 16mm Guide 42mm
given in Table 4 for the relevant length of run and the number GE20 20mm Guide 42mm
GE25 25mm Guide 42mm
of bends and sets in that run. GE32 32mm Guide 63.5mm
GE38 11/2” Guide 31/2”
The conduit sizes which Type Conductor GE50 2” Guide 31/2”
will accommodate the of cross-sectional
cables are those with a conductor area mm2 Factor
DRAW–IN TAPES
conduit factor equal to
1 16 Draw-in Tape – Steel
or greater than the sum
1.5 22 No. DT20
of the cable factors.
Solid 2.5 30 Size 20 Metres x 3.2mm
or 4 43 No. DT30
Table 3 Cable factors for Size 30 Metres x 3.2mm
Stranded 6 58
long straight runs, or runs
10 105
incorporating bends

5
CONDUIT FITTINGS AND ACCESSORIES BAR ON

BOXES – CIRCULAR, SMALL

Material: Malleable Iron
Finishes: Black Enamel, Galvanised
60.3mm Internal Diameter
20mm Boxes Minimum 25mm Deep
25mm Boxes Minimum 28mm Deep Through and Back Outlet No. M188
Tapped M4 at 50.8mm centres. Size 20mm 25mm
With tapped hole in base for earthing screw. Standard Pack Qty 10 10
Supplied without covers or fixing screws unless ordered.

Terminal No. M181

Size 20mm 25mm
Angle and Back Outlet No. M189
Standard Pack Qty 10 10
Size 20mm 25mm
Standard Pack Qty 10 10

Through No. M182

Size 20mm 25mm
Tee and Back Outlet No. M190
Standard Pack Qty 10 10
Size 20mm 25mm
Standard Pack Qty 10 10

Angle No. M183

Size 20mm 25mm Intersection and Back Outlet
Standard Pack Qty 10 10 No. M191
Size 20mm 25mm
Standard Pack Qty 10 10

Tee No. M184

Size 20mm 25mm Tangent Through No. M192
Standard Pack Qty 10 10 Size 20mm 25mm
Standard Pack Qty 10 10

Intersection No. M185

Size 20mm 25mm Tangent Angle No. M193
Standard Pack Qty 10 10 Size 20mm 25mm
Standard Pack Qty 10 10

Back Outlet No. M186

Size 20mm 25mm Tangent Tee No. M194
Standard Pack Qty 10 10 Size 20mm 25mm
Standard Pack Qty 10 10

Terminal and Back Outlet No. M187

Branch Two Way (U) No. M195
Size 20mm 25mm
Size 20mm 25mm
Standard Pack Qty 10 10
Standard Pack Qty 10 10

6
CONDUIT FITTINGS AND ACCESSORIES BAR ON

Branch Three Way (Y) No. M196

Size 20mm 25mm
Standard Pack Qty 10 10

Back Outlet No. M216

Size 20mm
Standard Pack Qty 5
Twin Through Way (H) No. M197
Size 20mm 25mm
Standard Pack Qty 10 10

Terminal and Back Outlet No. M217

Size 20mm
Standard Pack Qty 5
BOXES – CIRCULAR, LARGE
Material: Malleable Iron
Finishes: Black Enamel, Galvanised
81mm Internal Diameter,
20mm and 25mm Boxes Minimum 35mm Deep. Through and Back Outlet No. M218
32mm Box Minimum 38mm Deep. Size 20mm
11/2” Box Minimum 44mm Deep. Standard Pack Qty 5
2” Box Minimum 57mm Deep.
Tapped M4 at 71.5mm Centres.
With tapped hole in base for earthing screw.
Supplied without covers or fixing screws unless ordered.
Angle and Back Outlet No. M219
Terminal No. M211
Size 20mm
Size 20mm 25mm 32mm
Standard Pack Qty 5
Standard Pack Qty 5 5 5
Size 11/2” and 2” are available on
special request only

Through No. M212 Tee and Back Outlet No. M220

Size 20mm 25mm 32mm Size 20mm
Standard Pack Qty 5 5 5 Standard Pack Qty 5
Size 11/2” and 2” are available on
special request only

Angle No. M213 Intersection and Back Outlet

Size 20mm 25mm 32mm No. M221
Standard Pack Qty 5 5 5 Size 20mm
Size 11/2” and 2” are available on Standard Pack Qty 5
special request only

Tee No. M214

Tangent Angle No. M222
Size 20mm 25mm 32mm
Size 20mm 25mm 32mm
Standard Pack Qty 5 5 5
Standard Pack Qty 5 5 5
Size 11/2” and 2” are available on
special request only

Intersection No. M215

Size 20mm 25mm 32mm Tangent Tee No. M223
Standard Pack Qty 5 5 5 Size 20mm 25mm 32mm
Size 11/2” and 2” are available on Standard Pack Qty 5 5 5
special request only

7
CONDUIT FITTINGS AND ACCESSORIES BAR ON

BOXES – CIRCULAR, SMALL EXTENSION PATTERN

Material: Malleable Iron
Finishes: Black Enamel, Galvanised
60.3mm Internal Diameter
BOXES – CIRCULAR, SMALL SPECIAL DEEP 20mm Boxes Minimum 25mm Deep
Material: Malleable Iron 25mm Boxes Minimum 28mm Deep
Finishes: Black Enamel, Galvanised Tapped M4 at 50.8mm centres.
60.3mm Internal Diameter x 62mm Deep. Tapped M4 at 50.8mm With tapped hole in base for earthing screw.
Centres. With tapped hole in base for earthing screw. Supplied without covers or fixing screws unless ordered.
Supplied without covers or fixing screws unless ordered.
Terminal No. M241
Terminal No. M231 Size 20mm 25mm
Size 20mm 25mm Standard Pack Qty 10 10
Standard Pack Qty 5 5
Size 11/2” and 2” are available on
special request only

Through No. M242

Through No. M232 Size 20mm 25mm
Size 20mm Standard Pack Qty 10 10
Standard Pack Qty 5

Angle No. M243

Angle No. M233 Size 20mm 25mm
Size 20mm 25mm Standard Pack Qty 10 10
Standard Pack Qty 5 5

Tee No. M244

Tee No. M234 Size 20mm 25mm
Size 20mm 25mm Standard Pack Qty 10 10
Standard Pack Qty 5 5

Intersection No. M245

Intersection No. M235 Size 20mm 25mm
Size 20mm 25mm Standard Pack Qty 10 10
Standard Pack Qty 5 5

BOXES – CEILING ROSE

Material: Malleable Iron
Finishes: Black Enamel, Galvanised
With tapped hole in base for earthing screw. Internal Diameter minimum
55mm and Minimum Depth 12.5mm. Tapped M4 at 50.8mm Centres.

Shallow No. M361

Size 20mm
Standard Pack Qty 25

Note this is a special modified

version of M186

8
CONDUIT FITTINGS AND ACCESSORIES BAR ON

BOXES – LOOPING IN
With tapped hole in base for earthing screw. 20mm clearance.

Medium, Steel No. R274

Material: Steel. Finishes: Black Enamel,
Galvanised. With tapped hole in base for
earthing screw. 1 Hole or 4 Knockouts.
Size: 29mm Deep x 63.5mm
Internal Diameter. Standard Pack Qty: 10

Medium, Malleable Iron No. M272

Material: Malleable Iron. Finishes: Black
Enamel, Galvanised. With tapped hole in
base for earthing screw. 1,2,3,4 Holes.
Minimum 31mm Deep x 63.5mm Internal
Diameter. Standard Pack Qty: 10

ADAPTORS
Material: Steel
Finish: Electro Zinc Plated

Imperial to Metric Adaptor No. R114

Size: 3/4” MALE to 20mm FEMALE
Standard Pack Qty: 100
Size: 1” MALE to 25mm FEMALE
Standard Pack Qty: 50

Metric to Imperial Adaptor No. R115

Size: 20mm MALE to 3/4” FEMALE
Standard Pack Qty: 100
Size: 25mm MALE to 1” FEMALE
Standard Pack Qty: 50

9
CONDUIT FITTINGS AND ACCESSORIES

COVERS – CIRCULAR SMALL

Cover, Light, Overlapping, Loose, Cover, Female Dome
No Screws No. R280 No. R289
Material: Steel Material: Steel
Finishes: Black Enamel, Galvanised Finishes: Black Enamel, Galvanised
Standard Pack Qty: 50 Size 20mm 25mm
Standard Pack Qty 25 25

Cover, Light, Loose, No Screws. Cover, Ball and Socket, Earthed

No. R281 No. R290
Material: Steel Material: Steel
Finishes: Black Enamel, Galvanised Finishes: Black Enamel, Galvanised
Standard Pack Qty: 100 Size 20mm
Standard Pack Qty 25

Cover, Heavy, Loose, No Screws

No. R282
Material: Steel
Finishes: Black Enamel, Galvanised
Standard Pack Qty: 50

Cover, Heavy, Loose, No Screws

No. M283
Material: Malleable Iron
Finishes: Black Enamel, Galvanised
Standard Pack Qty: 50

Cover, Ball and Socket, Earthed

No. M286
Material: Malleable Iron with copper earthwire
Finishes: Black Enamel, Galvanised
Size 20mm 25mm
Standard Pack Qty: 25 25
COVERS – CIRCULAR LARGE
Cover, Hook Dome, Combined Cover, Light, Loose, No Screws
No. R287 No. R381
Material: Steel Material: Steel
Finishes: Black Enamel, Galvanised Finishes: Black Enamel, Galvanised
Standard Pack Qty: 25 Standard Pack Qty: 50

Cover, Female Dome

No. M288
Material: Malleable Iron
Finishes: Black Enamel, Galvanised
Size 20mm 25mm
Standard Pack Qty 25 25

10
CONDUIT FITTINGS AND ACCESSORIES

HOOKS AND LOOPS

Loop, Male No. M501 Coupling, Inspection No. M103
Material: Malleable Iron Material: Malleable Iron Body, 16mm – 32mm,
Finishes: Black Enamel, Galvanised Steel Cover, 11/2” – 2” Malleable Iron Cover
Size 20mm 25mm Finishes: Black Enamel, Galvanised
Standard Pack Qty 50 50 Size 20mm 25mm 32mm
Standard Pack Qty 25 10 5
Size 11/2” 2”
Hook, Male No. M502 Standard Pack Qty 5 1
Material: Malleable Iron
Finishes: Black Enamel, Galvanised Coupling, Earthing No. M105
Size 20mm 25mm Material: Malleable Iron
Standard Pack Qty 50 50 Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm
Standard Pack Qty 50 50 25
Loop, Female No. M503 Size 11/2” 2”
Material: Malleable Iron Standard Pack Qty 25 10
Finishes: Black Enamel, Galvanised
Size 20mm 25mm Nipple, Normal No. F107
Standard Pack Qty 50 50 Material: Steel
Finishes: Self Colour, Galvanised
Size 20mm 25mm 32mm
Hook, Female No. M504 Standard Pack Qty 100 100 50
Material: Malleable Iron Size 11/2” 2”
Finishes: Black Enamel, Galvanised Standard Pack Qty 50 25
Size 20mm 25mm
Standard Pack Qty 50 50 Nipple, 300mm Long No. F109
Material: Steel
Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm
COUPLINGS
Standard Pack Qty 10 10 10
Coupling, Solid No. R101 Size 11/2” 2”
Material: Steel Standard Pack Qty 10 5
Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm Coupling, Flanged, No. M110/M111
Standard Pack Qty 100 50 50 Material: Malleable Iron
Size 11/2” 2” Complete with washer and brass bush
Standard Pack Qty 25 20 N.B. – Neoprene washers effect a greater
degree of protection from the ingress of
dust and/or liquids.
Finishes: Black Enamel, Galvanised
M110 (lead washer),
M111 (Neoprene washer)
Size 20mm 25mm 32mm
Standard Pack Qty 50 50 25
Size 11/2”
Standard Pack Qty 25

11
CONDUIT FITTINGS AND ACCESSORIES BAR ON

ELBOWS TEES
Elbow, Solid No. M121 Tee, Solid No. M131
Material: Malleable Iron Material: Malleable Iron
Finishes: Black Enamel, Galvanised Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm Size 20mm 25mm 32mm
Standard Pack Qty 25 25 10 Standard Pack Qty 25 25 10
Size 11/2” 2” Size 11/2” 2”
are available on request only are available on request only

Elbow, Channel Inspection, No. M123 Tee, Channel Inspection, No. M133
Material: Malleable Iron, 20mm – 32mm Material: Malleable Iron,
Steel Cover 11/2” – 2” Malleable Iron Cover 20mm – 32mm Steel Cover
Finishes: Black Enamel, Galvanised 11/2” – 2” Malleable Iron Cover
Size 20mm 25mm 32mm Finishes: Black Enamel, Galvanised
Standard Pack Qty 25 25 10 Size 20mm 25mm 32mm
Size 11/2” 2” Standard Pack Qty 25 20 10
are available on request only Size 11/2” 2”
are available on request only

BENDS
Bends, Normal, Internal Thread RINGS
No. R141 Ring, Adaptor No. M370
Material: Steel Material: Malleable Iron
Finishes: Black Enamel, Galvanised Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm Standard Pack Qty: 100
Standard Pack Qty 25 10 5
Size 11/2” 2”
are available on request only
Ring, Extension No. R294
Bend, Inspection No. M145 Material: Steel
Material: Malleable Iron, 20mm – 32mm Finishes: Black Enamel, Galvanised
Steel Cover 11/2” – 2” Malleable Iron Cover Size 6mm 10mm 13mm
Finishes: Black Enamel, Galvanised Standard Pack Qty 100 50 50
Size 20mm 25mm 32mm Size 16mm 19mm 25mm
Standard Pack Qty 25 10 5 Standard Pack Qty 25 25 25
Size 11/2” 2” Size 32mm 38mm 50mm
are available on request only Standard Pack Qty 10 10 10

WASHERS Clip, Earthing No. F506

Lead No. F112 Material: Copper
Neoprene No. F113 Finish: Self Colour
Size 20mm 25mm 32mm Size 20mm 25mm 32mm
Standard Pack Qty 50 50 25 Standard Pack Qty 100 100 50
Size 11/2” Size 11/2” 2”
Standard Pack Qty 25 Standard Pack Qty 50 50

Serrated No. F116

Material: Steel
Finishes: Self Colour, Zinc Plated
Size 20mm 25mm 32mm
Standard Pack Qty 100 100 100

12
CONDUIT FITTINGS AND ACCESSORIES BAR ON

BUSHES REDUCERS
Bush, Short Male No. F531 Reducer No. M471
Material: Brass Material: Malleable Iron
Finish: Self Colour Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm Size 20 x 16mm 25 x 16mm
Standard Pack Qty 100 50 50 St'd Pack Qty 100 100
Size 11/2” 2” 25 x 20mm 32 x 20mm
Standard Pack Qty 50 25 100 50
32 x 25mm 11/4” x 20mm
Bush, Long Male No. F532 50 50
Material: Brass 11/4” x 25mm 11/2” x 20mm
Finish: Self Colour 50 50
Size 20mm 25mm 32mm 11/2” x 25mm 11/2” x 32mm
Standard Pack Qty 100 50 50 50 50
Size 11/2” 2” 2” x 25mm 2” x 32mm
Standard Pack Qty 25 25 25 25
2” x 11/2”
Bush, Female No. F534 25
Material: Brass
Finish: Self Colour
Size 20mm 25mm 32mm
Standard Pack Qty 100 100 100
Size 11/2” 2”
Standard Pack Qty 100 50

PLUGS AND GLANDS LOCKNUTS

Plug, Hexagon Head, No. M527 Locknut, Hexagon Light No. R507
Material: Malleable Iron Material: Steel
Finishes: Black Enamel, Galvanised Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm Size 20mm 25mm 32mm
Standard Pack Qty 100 100 100 Standard Pack Qty 100 100 100
Size 11/2” 2” Size 11/2” 2”
Standard Pack Qty 50 25 Standard Pack Qty 50 25

Plug, Slotted Head No. F535 Locknut, Hexagon Heavy No. M508
Material: Brass Material: Malleable Iron
Finishes: Self Colour Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm Size 20mm 25mm 32mm
Standard Pack Qty 100 100 100 Standard Pack Qty 100 100 100
Size 11/2” 2” Size 11/2” 2”
Standard Pack Qty 100 50 Standard Pack Qty 50 50

Gland for T.R.S. or similar cable Locknut, Circular, Milled Edge

No. F538 No. F505
Material: Brass Material: Steel
Finishes: Self Colour Finishes: Self Colour, Zinc Plated
Size 20mm 25mm Size 20mm 25mm 32mm
Standard Pack Qty 100 100 Standard Pack Qty 100 100 100
Size 11/2” 2”
Standard Pack Qty 50 25

13
CONDUIT FITTINGS AND ACCESSORIES BAR ON

SADDLES SCREWS
Saddle, Hospital No. M362 Brass. M4 Pan Head No. F645
Material: Malleable Iron Base, with Steel Top Length: 6mm 10mm 12mm 16mm
Finishes: Black Enamel, Galvanised 20mm 25mm
Size 20mm 25mm 32mm Standard Pack Qty: 100
Standard Pack Qty 50 25 25
Size 11/2” 2”
Standard Pack Qty 25 10
Brass. M3.5 Pan Head No. F646
Saddle, Distance No. M363 Length: 6mm 10mm 12mm 16mm
Material: Iron Base with Steel Top 20mm 25mm
Finishes: Black Enamel, Galvanised Standard Pack Qty: 100
Size 20mm 25mm 32mm
Standard Pack Qty 50 25 25
Size 11/2” 2”
Standard Pack Qty 25 10 Brass. M3.5 Raised Countersunk
No. F647
Saddle, Spacer Bar, One Way Length: 6mm 10mm 12mm 16mm
No. R431 20mm 25mm
Material: Steel Standard Pack Qty: 100
Finishes: Black Enamel, Galvanised
Size 20mm 25mm 32mm
Standard Pack Qty 100 100 50 Brass. M3.5 Cheese Head No. F648
Size 11/2” 2” Length: 6mm 10mm 12mm 16mm
Standard Pack Qty 50 25 20mm 25mm
Standard Pack Qty: 100
Clip (Half Saddle) No. F441
Material: Steel
Finishes: Black Enamel, Galvanised
Size 20mm 25mm Brass. M4 Earth Terminal Studs
Standard Pack Qty 100 100 No. F657
Size 32mm Standard Pack Qty: 100
Standard Pack Qty 100

Saddle, 1 Way (Single) No. R451

Material: Steel
Finishes: Black Enamel, Galvanised Screw – Steel, Bright Zinc Plated.
Size 20mm 25mm 32mm M4 Pan Head No. F645
Standard Pack Qty 100 100 100 Length: 5mm 6mm
Size 11/2” 2” Standard Pack Qty: 100
Standard Pack Qty 100 50

Crampet, Steel No. F461

Material: Steel Screw – Steel, Bright Zinc Plated.
Finishes: Black Enamel, Galvanised M3.5 Pan Head No. F646
Size 20mm 25mm Length: 5mm 6mm
Standard Pack Qty 100 100 Standard Pack Qty: 100

14
CONDUIT FITTINGS AND ACCESSORIES BAR ON

GASKETS NO STANDARD PACK – ORDER AS REQUIRED

Rubber Gasket for Coupling, Rubber Gasket for Bend,
Inspection No. F401 Inspection No. F408
Size 20mm 25mm 32mm Size 20mm 25mm 32mm
Size 11/2” 2” Size 11/2” 2”

Rubber Gasket for Elbow, Rubber Gasket for Box,

Channel Inspection No. F402 Small Circular No. F409
Size 20mm 25mm 32mm
Size 11/2” 2”

Rubber Gasket for Elbow, Rubber Gasket for Box,

Circular Inspection No. F403 Large Circular No. F410

Rubber Gaskets also available for all sizes of

Adaptable Boxes No. F415

Rubber Gasket for Tee,

Channel Inspection No. F405
Size 20mm 25mm 32mm
Size 11/2” 2”

15
ADAPTABLE BOXES

Adaptable Boxes
Plain No. R261

Size
Barton Adaptable Boxes are manufactured from steel and are Pack
available with plain sides or knock-outs. mm Inches Qty
The standard finishes are Black Enamel and 75 x 75 x 37.5 3 x 3 x 11/2 10
Hot Dipped Galvanised. 75 x 75 x 50 3x 3x2 10
Where boxes are supplied with knock-outs the number and size 75 x 75 x 75 3x 3x3 6
are as follows: 100 x 75 x 37.5 4 x 3 x 11/2 10
100 x 75 x 50 4x 3x2 10
Width of side Number of K.O.'s Size of K.O. 100 x 100 x 37.5 4 x 4 x 11/2 10
in each side 100 x 100 x 50 4x 4x2 10
3" 2 20mm 100 x 100 x 75 4x 4x3 6
100 x 100 x 100 4x 4x4 6
4" 3 20mm
150 x 75 x 37.5 6 x 3 x 11/2 6
6" 4 20mm 150 x 75 x 50 6x 3x2 6
9" 6 20mm 150 x 75 x 75 6x 3x3 6
12" 6 20mm 150 x 100 x 37.5 6 x 4 x 11/2 6
150 x 100 x 50 6x 4x2 6
Flanged lids are fitted as standard to all boxes and are secured 150 x 100 x 75 6x 4x3 6
by M5 x 8mm mushroom head screws. 150 x 150 x 37.5 6 x 6 x 11/2 6
150 x 150 x 50 6x 6x2 6
Boxes can be supplied to order with overlapping flat lids at an
150 x 150 x 75 6x 6x3 4
extra charge.
150 x 150 x 100 6x 6x4 2
Rubber gaskets are available and supplied to order at an extra
150 x 150 x 150 6x 6x7 2
charge. 200 x 150 x 150 8x 6x2 6
The complete range is manufactured in accordance with 200 x 200 x 100 8x 8x4 2
BS 4568 Part 2. 200 x 200 x 150 8x 8x6 2
A range of Pre-Galvanised Adaptable Boxes are also available 225 x 75 x 37.5 9 x 3 x 11/2 6
on request. 225 x 75 x 50 9x 3x2 6
225 x 75 x 75 9x 3x3 6
225 x 100 x 75 9x 4x3 4
225 x 150 x 37.5 9 x 6 x 11/2 4
225 x 150 x 50 9x 6x2 4
225 x 150 x 75 9x 6x3 4
225 x 150 x 100 9x 6x4 2
225 x 225 x 50 9x 9x2 2
225 x 225 x 75 9x 9x3 2
225 x 225 x 100 9x 9x4 1
225 x 225 x 150 9x 9x6 1
300 x 150 x 50 12 x 6 x 2 2
300 x 150 x 75 12 x 6 x 3 2
300 x 150 x 100 12 x 6 x 4 2
300 x 225 x 50 12 x 9 x 2 2
300 x 225 x 75 12 x 9 x 3 1
300 x 225 x 100 12 x 9 x 4 1
300 x 300 x 37.5 12 x 12 x 1 2
300 x 300 x 50 12 x 12 x 2 2
Adaptable Boxes 300 x 300 x 75 12 x 12 x 3 1
with Knock-outs No. R262 300 x 300 x 100 12 x 12 x 4 1
300 x 300 x 150 12 x 12 x 6 1
400 x 300 x 150 16 x 12 x 6 1
450 x 450 x 150 18 x 18 x 6 1
600 x 600 x 150 24 x 24 x 6 1

16
CONDUIT–FLEXIBLE

REFER BARTON FLEXIBLE CATALOGUE FOR A COMPLETE RANGE OF FLEXIBLE CONDUITS AND FITTINGS

STANDARD F LEXIBLE METALLIC Adaptor, Flexible Tube, Conduit,

CONDUIT (UNPACKED) Male Thread No. F536
Galvanised Steel – No. F562 Material: Brass.
Finishes: Self colour.
Internal Diameter
16mm 20mm 25mm Conduit x Flexible Standard Pack
32mm 40mm 50mm 63 mm Conduit I/D Quantity
16mm x 16mm 100
20mm x 16mm 100
P.V.C. COVERED FLEXIBLE METALLIC CONDUIT
20mm x 20mm 50
Galvanized Steel PVC Covered NO. F582
25mm x 25mm 50
Available as standard in black P.V.C. sheathed for added 32mm x 32mm 25
protection against ingress of dirt, moisture and greases. 1 2” x 40mm
1/
20
2” x 50mm 10
A full range of fittings is also available.

SPACING OF SUPPORTS FOR CONDUITS

The following table gives guidance on the spacing of support for
flexible conduit.

Nominal size Maximum distance between supports

of conduit Horizontal runs Vertical runs Adaptor, Flexible Tube, Conduit,
m m Female Thread No. F537
Material: Brass.
16mm and Under 0.3 0.5
Finishes: Self colour.
17mm-25mm 0.4 0.6
26mm-40mm 0.6 0.8 Conduit x Flexible Standard Pack
.
Over 40 0.8 1.0 Conduit I/D Quantity
20mm x 16mm 100
20mm x 20mm 50
25mm x 20mm 50
25mm x 25mm 50
32mm x 32mm 25
1 2” x 40mm
1/
20
2” x 50mm 10

17
SWITCH AND SOCKET BOXES

A comprehensive range of switch and socket boxes manufactured

in four depths 16mm, 25mm, 35mm and 47mm and all available
in one and two gang configurations. To facilitate the easy fitting
of accessories into the boxes, they are designed with at least one
adjustable lug.

Adjustable Lug

All Barton RE Series Switch and Socket Boxes include a unique

Regulation Brass Earth Terminal into which several earth wires
can be fitted from either the inside or outside of the box.

Regulation Brass Earth Terminal

Each box is produced with a specified number and size of knock

outs which allow adequate cable entries for wiring purposes.
Nominal Dimensions:
One Gang – 72mm x 72mm
Two Gang – 132mm x 72mm
Material: Pre-coated galvanised steel
Barton switch and socket boxes are manufactured in accordance
with BS 4662.

18
SWITCH AND SOCKET BOXES

Switch and Socket Boxes

35mm deep No. BC82RE2025

Gang Type of Entry Fixing Lugs Pack Qty.

One 20 & 25mm 3 fixed and 10

Gang KO’s 1 adjustable

Switch and Socket Boxes

35mm deep No. BC92RE

Gang Type of Entry Fixing Lugs Pack Qty.

Two 20 & 25mm 1 fixed and 5

Gang KO’s 1 adjustable

Switch and Socket Boxes

47mm deep No. BC14RE
(For use with double thickness partitioning)

Gang Type of Entry Fixing Lugs Pack Qty.

One 20mm 2 fixed and 20

Gang KO’s 2 adjustable

Switch and Socket Boxes

47mm deep No. BC22RE
(For use with double thickness partitioning)

Gang Type of Entry Fixing Lugs Pack Qty.

Two 20 & 25mm 1 fixed and 10

Gang KO’s 1 adjustable

19
 BAR ON

THE BARTON CABLE

TRUNKING RANGE
QUICK-FIX RANGE (QF) QUALITY
This is the most popular range of trunking. It features a rapid and All galvanised steel used in the manufacture of cable trunking
fool proof method for securing the lid, by simply twisting and fittings complies with BS EN 10142 (and BS 4678), ensuring
turnbuckles through 90 degrees. These lock the lid in place, a no-flake, no-fracture product.
providing full earth continuity between body and lid.
The range is manufactured from high quality galvanised steel
as standard and is also available as an option with a coloured
powder coating.

MULTI COMPARTMENT TRUNKING

LIGHTING TRUNKING (LT) We manufacture Multi Compartment Trunking.
The range of lighting trunking has a 50 x 50mm body section with Please see Page 28 for further information.
either a white PVC or steel snap-in lid. Fittings are common to the
Quick-Fix and Screw-Fix ranges, providing complete compatability
between cable and lighting trunking.
The standard finish is high quality galvanised steel.

20
 BAR ON

QUICK–FIX

Direction arrows – Indicates clearly

that turnbuckle is correctly
Recessed turnbuckle – Provides good positioned –
aesthetic appearance. Assists installer quality inspection.

Turnbuckle lid fixing – A simple 1/4 turn locks or unlocks the lid.
Allows easy fitting and removal, still providing secure fixing.

Integral Couplers – Easy and quick

attachment to trunking with no additional
couplers necessary.

Good scraping earth –

Provides good earth continuity
between body and lid,
ensuring safety.

Plunged and pierced tapped holes on

couplers and fittings – Single screw fixing
saves time – Fixing merely requires a
screwdriver.

Fixing screws supplied with each fitting –

No additional items to order.

Return edge – Increased rigidity.

The turnbuckle can be used to secure Copper Earth Link available if required.
lids on cut lengths of trunking.

21
QUICK FIX TRUNKING BAR ON

Dimensions CABLE TRUNKING RIGHT ANGLE BEND RIGHT ANGLE BEND RIGHT ANGLE BEND
(mm) (See note (1) below) – TOP LID – INSIDE LID – OUTSIDE LID

50 x 50 QF/22 QF/RABT 22 QF/RABI 22 QF/RABO 22

75 x 50 QF/32 QF/RABT 32 QF/RABI 32 QF/RABO 32
75 x 75 QF/33 QF/RABT 33 QF/RABI 33 QF/RABO 33
100 x 50 QF/42 QF/RABT 42 QF/RABI 42 QF/RABO 42
100 x 75 QF/43 QF/RABT 43 QF/RABI 43 QF/RABO 43
100 x 100 QF/44 QF/RABT 44 QF/RABI 44 QF/RABO 44
150 x 50 QF/62 QF/RABT 62 QF/RABI 62 QF/RABO 62
150 x 75 QF/63 QF/RABT 63 QF/RABI 63 QF/RABO 63
150 x 100 QF/64 QF/RABT 64 QF/RABI 64 QF/RABO 64
150 x 150 QF/66 QF/RABT 66 QF/RABI 66 QF/RABO 66
225 x 100 QF/94 QF/RABT 94 QF/RABI 94 QF/RABO 94

Dimensions 45 DEGREE BEND 45 DEGREE BEND 45 DEGREE BEND 4 WAY HANGER

(mm) – TOP LID – INSIDE LID – OUTSIDE LID BOX

50 x 50 QF/FFT 22 QF/FFI 22 QF/FFO 22 QF/FW 22 OF/H 22

75 x 50 QF/FFT 32 QF/FFI 32 QF/FFO 32 QF/FW 32 OF/H 32
75 x 75 QF/FFT 33 QF/FFI 33 QF/FFO 33 QF/FW 33 QF/H 33
100 x 50 QF/FFT 42 QF/FFI 42 QF/FFO 42 QF/FW 42 QF/H 42
100 x 75 QF/FFT 43 QF/FFI 43 QF/FFO 43 QF/FW 43 QF/H 43
100 x 100 QF/FFT 44 QF/FFI 44 QF/FFO 44 QF/FW 44 QF/H 44
150 x 50 QF/FFT 62 QF/FFI 62 QF/FFO 62 QF/FW 62 QF/H 62
150 x 75 QF/FFT 63 QF/FFI 63 QF/FFO 63 QF/FW 63 QF/H 63
150 x 100 QF/FFT 64 QF/FFI 64 QF/FFO 64 QF/FW 64 QF/H 64
150 x 150 QF/FFT 66 QF/FFI 66 QF/FFO 66 QF/FW 66 QF/H 66
225 x 100 QF/FFT 94 QF/FFI 94 QF/FFO 94 QF/FW 94 QF/H 94

(1) Cable Trunking – 3m length complete Product Code Example. QF/RABT 22. ie. All 50 x 50mm Fittings are compatible
with lid and couplers. Quick-Fix/Right Angle Bend Top 2’’ x 2’’. with 50 x 50mm Lighting Trunking.

22
QUICK FIX TRUNKING BAR ON

Dimensions TEE BEND TEE BEND TEE BEND REDUCER

(mm) – TOP LID – INSIDE LID – OUTSIDE LID

50 x 50 QF/TT 22 QF/TI 22 QF/TO 22

75 x 50 QF/TT 32 QF/TI 32 QF/TO 32 75 x 50 TO 50 x 50mm QF/RED 32/22
75 x 75 QF/TT 33 QF/TI 33 QF/TO 33 75 x 75 TO 50 x 50mm QF/RED 33/22
100 x 50 QF/TT 42 QF/TI 42 QF/TO 42 75 x 75 TO 75 x 50mm QF/RED 33/32
100 x 75 QF/TT 43 QF/TI 43 QF/TO 43 100 x 50 TO 50 x 50mm QF/RED 42/22
100 x 100 QF/TT 44 QF/TI 44 QF/TO 44 100 x 75 TO 50 x 50mm QF/RED 43/22
150 x 50 QF/TT 62 QF/TI 62 QF/TO 62 100 x 100 TO 50 x 50mm QF/RED 44/22
150 x 75 QF/TT 63 QF/TI 63 QF/TO 63 100 x 100 TO 75 x 75mm QF/RED 44/33
150 x 100 QF/TT 64 QF/TI 64 QF/TO 64 150 x 100 TO 100 x 100mm QF/RED 64/44
150 x 150 QF/TT 66 QF/TI 66 QF/TO 66 150 x 150 TO 100 x 100mm QF/RED 66/44
225 x 100 QF/TT 94 QF/TI 94 QF/TO 94 150 x 150 TO 150 x 100mm QF/RED 66/64

Dimensions
STOP END COUPLER FLANGED CABLE PIN LOOSE SEPARATOR
(mm) COUPLER RETAINER RACK 3m LENGTHS

50 x 50 QF/SE 22 QF/C 2 QF/FC 2 QF/CRS 2 QF/PR 22 QF/LS 2

75 x 50 QF/SE 32 QF/C 2 QF/FC 2 QF/CRS 3 QF/PR 32 QF/LS 2
75 x 75 QF/SE 33 QF/C 3 QF/FC 3 QF/CRS 3 QF/PR 33 QF/LS 3
100 x 50 QF/SE 42 QF/C 2 QF/FC 2 QF/CRS 4 QF/PR 42 QF/LS 2
100 x 75 QF/SE 43 QF/C 3 QF/FC 3 QF/CRS 4 QF/PR 43 QF/LS 3
100 x 100 QF/SE 44 QF/C 4 QF/FC 4 QF/CRS 4 QF/PR 44 QF/LS 4
150 x 50 QF/SE 62 QF/C 2 QF/FC 2 QF/CRS 6 QF/PR 62 QF/LS 2
150 x 75 QF/SE 63 QF/C 3 QF/FC 3 QF/CRS 6 QF/PR 63 QF/LS 3
150 x 100 QF/SE 64 QF/C 4 QF/FC 4 QF/CRS 6 QF/PR 64 QF/LS 4
150 x 150 QF/SE 66 QF/C 6 QF/FC 6 QF/CRS 6 QF/PR 66 QF/LS 6
225 x 100 QF/SE 94 QF/C 4 QF/FC 4 QF/CRS 9 QF/PR 94 QF/LS 4

*2 Metre lengths available to order. Hangers are available with 11mm or Manufactured from pre-galvanised
*Powder-coated finishes are available to 21mm holes. sheet steel to BS EN 10142.
suit customer requirements.
*Non gusset fittings and accessories
are available.

23
LIGHTING TRUNKING BAR ON

Dimensions
LIGHTING TRUNKING – BODY ONLY METAL LID P.V.C. LID
mm

3.5M long LT22/3.5 5.0M long LT22/5.0 2M long 2M long

50 x 50
4.5M long LT22/4.5 6.0M long LT22/6.0 LT2/ML LT2/PVCL

Dimensions
RIGHT ANGLE BEND – TOP LID RIGHT ANGLE BEND – INSIDE LID RIGHT ANGLE BEND – OUTSIDE LID
mm

QF/RABT 22 QF/RABI 22 QF/RABO 22

50 x 50

Dimensions
45 DEGREE BEND – TOP LID 45 DEGREE BEND – INSIDE LID 45 DEGREE BEND – OUTSIDE LID
mm

QF/FFT 22 QF/FFI 22 QF/FFO 22

50 x 50

Product Code Example QF/RABT 22

i.e. Quick-Fix/Right Angle Bend Top 2’’ x 2’’.

24
LIGHTING TRUNKING BAR ON

Dimensions
TEE BEND – TOP LID TEE BEND – INSIDE LID TEE BEND – OUTSIDE LID
mm

QF/TT 22 QF/TI 22 QF/TO 22

50 x 50

Dimensions
FOUR WAY BOX SUSPENSION UNIT HANGER
mm

QF/FW 22 LT/SU 22 LT/H 22

50 x 50

Dimensions
STOP END COUPLER FLANGED COUPLER CABLE RETAINER
mm

QF/SE 22 LT/SC 22 (Short) QF/FC 22 QF/CRS 2

50 x 50
LT/LC 22 (Long)

50 x 50mm Quick-Fix fittings are available Hangers are available with 11mm or Manufactured from pre-galvanised
for use with Lighting Trunking. 21mm holes. sheet steel to BS EN 10142.

25
MULTI-COMPARTMENT TRUNKING BAR ON

AVAILABLE IN QUICK-FIX

For 2 Compartment Trunking add QF/– – – – –/2

the listed numbers on the previous pages.

For 3 Compartment Trunking add QF/– – – – –/3

to the listed numbers on the previous pages.

Multi Compartment Trunking is supplied with evenly spaced

separators. Trunking with different sized compartments may be
supplied subject to prior agreement.
Details must be confirmed in writing when ordering.

TRUNKING AND BENDS

“L” shaped separators are welded into position or can be supplied
loose for fitting on site.

TEES AND INTERSECTIONS

Separators are supplied loose so that wiring can be laid
into position. 50% of the wiring area is lost by the fitting
of separators.

26
 BAR ON

TRUNKING CAPACITY GUIDE

The following guide will help you select the correct size of TO USE THIS GUIDE
trunking for the required number and size of cables in your (a) Calculate Capacity Unit by multiplying the number of cables
installation. It has been prepared from Appendix 12 of the I.E.E. by the Factor from table A.
wiring regulations for Electrical Installations. (b) Use Capacity Unit to choose nearest size of trunking
When cables are pulled into trunking, they experience drag from from table B.
other cables and from the trunking itself. Using this guide to (c) Remember that cables can cross over each other
select the size of trunking for your cabling will ensure that an and that you may need space for future wiring.
acceptable pulling force is required to install the cables, and that Consequently, select the next size up.
minimum damage to the insulation will occur. This is only a guide:
and is designed for use with single core PVC insulated cables.

EXAMPLE
NUMBER OF CONDUCTOR FACTOR CAPACITY UNIT
CABLES CROSS SECTION MM2 (FROM A) (FROM B)
50 1.5 stranded 8.1 405
40 2.5 stranded 11.4 456
20 6.0 stranded 22.9 458
Total 1319

From Table B, The Capacity Unit of 1319 falls between

50 x 50mm and 75 x 50mm hence choose 75 x 50mm trunking.

TABLE A TABLE B
TYPE OF CONDUCTOR FACTOR CAPACITY DIMENSION OF
CONDUCTOR CROSS SECTION UNIT TRUNKING MM X MM
1.5 7.1 738 75 x 25
Solid
2.5 10.2 993 100 x 25
1.5 8.1 1037 50 x 50
2.5 11.4 1555 75 x 50
4 15.2 2091 100 x 50
Stranded 6 22.9 2371 75 x 75
10 36.3 3162 150 x 50
16 42.9 3189 100 x 75
25 62.6 4252 100 x 100
35 95 4743 150 x 75

Note: For sizes and types of cables not included in the above 9697 150 x 150
tables A and B, calculate total cross section of cables and select
trunking size so that not more than 45% of trunking is filled.

27
NOTES

ORDERING PROCEDURES QUALITY ASSURANCE PROCEDURES

1. Please contact our sales office to discuss product availability, All aspects of the operations of Barton Engineering are governed
delivery times and any commercial queries. by detailed Quality Assurance Procedures. These are subject to
2. All telephone orders must be confirmed in writing and be regular independent audit who provide independent certification to
clearly marked ‘Confirmation Order’. Please order using the confirm that they comply with the requirements
catalogue number and specify the finish required. of the International Standard ISO 9001.

3. Invoices will reflect current ongoing discounts unless there is

a valid special price. In such cases, these prices will only be
available if the written order refers to special prices and
refers to the quotation reference number.
4. Orders for items not usually held in stock must be placed in
writing and may not then be cancelled. CE MARKING
5. Please refer to our current price lists for details of minimum It is our policy that Barton Engineering products will be CE
carriage paid order values and any minimum order charges. marked to confirm that they comply with the relevant directives.
6. All orders and transactions are subject to our Conditions of At the time of writing our best advice is that our ranges of
Sale which may be obtained upon request. Cable Protection Products will be classified within the Low Voltage
Products Directive. We will therefore ensure that the CE marking
is undertaken to comply with the necessary regulation.

28
Numerical Index

No. Page No. Page No. Page

CONDUIT FITTINGS AND ACCESSORIES R261 Adaptable Box, Plain ..................... 16 F535 Plug, Brass................................... 13
R101 Couplings ..................................... 11 R262 Adaptable Box, Knock-Outs............ 16 F536 Adaptors, Brass, Flexible Conduit,
M103 Couplings, Inspection .................... 11 M272 Loop in Box, Malleable Iron, Male ............................................ 17
M105 Couplings, Earthing ....................... 11 Medium.......................................... 9 F537 Adaptors, Brass, Flexible Conduit,
F107 Nipples, Normal............................ 11 R274 Loop in Box, Steel, Medium ............. 9 Female ........................................ 17
F109 Nipples, 300mm........................... 11 R280 Cover, Overlapping ....................... 10 F538 Glands, Brass ............................... 13
M110 Flanged Couplers.......................... 11 R281 Cover, Light, Steel ........................ 10 F562 Flexible Conduit ............................ 17
M111 Flanged Couplers.......................... 11 R282 Cover, Heavy, Steel ...................... 10 F582 Flexible Conduit, PVC ......... 17
F112 Lead Washers............................... 12 M283 Cover, Heavy, Malleable Iron.......... 10 F645 Screws ........................................ 14
F113 Neoprene Washers ....................... 12 M286 Cover, Ball and Socket, F646 Screws ........................................ 14
R114 Adaptors, Imperial/Metric ................ 9 Malleable Iron ............................... 10 F647 Screws ........................................ 14
R115 Adaptors, Metric/Imperial ................ 9 R287 Cover, Hook and Dome, Steel........ 10 F648 Screws ........................................ 14
F116 Serrated Washers ......................... 12 M288 Cover, Female Dome, F657 Studs, Earthing, Terminal .............. 14
M121 Elbows, Solid................................ 12 Malleable Iron ............................... 10
M123 Elbows, Inspection, Channel........... 12 R289 Cover, Female Dome, Steel ........... 10 SWITCH AND SOCKET BOXES
M131 Tees, Solid ................................... 12 R290 Cover, Ball and Socket, Steel......... 10 BC14RE47mm One Gang .......................... 19
M133 Tees, Inspection, Channel.............. 12 R294 Extension Ring.............................. 12 BC22RE47mm Two Gang .......................... 19
R141 Bends .......................................... 12 M361 Box, Ceiling Rose............................ 8 BC82RE35mm One Gang .......................... 19
M145 Bends, Inspection ......................... 12 M362 Saddle, Hospital ........................... 14 BC92RE35mm Two Gang .......................... 19
M181 Terminal Box .................................. 6 M363 Saddle, Distance........................... 14
M182 Through Box................................... 6 M370 Adaptor Ring ................................ 12 TRUNKING
M183 Angle Box....................................... 6 R381 Large Cover, Light, Steel............... 10 QF/– – Quick-fix System ................... 21 – 23
M184 Tee Box ......................................... 6 R382 Large Cover, Heavy, Steel ............. 10 LT/– – Lighting System .................... 24 – 25
M185 Intersection Box.............................. 6 F401 Gasket, Inspection Coupler ............ 15 Multi Compartment Trunking ...................... 26
M186 Back Outlet .................................... 6 F402 Gasket, Channel Inspection Elbow .. 15
M187 Terminal and Back Outlet Box .......... 6 F403 Gasket, Circular Inspection Elbow .. 15
M188 Through and Back Outlet Box........... 6 F405 Gasket, Channel Inspection Tee ..... 15
M189 Angle and Back Outlet Box............... 6 F408 Gasket, Inspection Bend ................ 15
M190 Tee and Back Outlet Box ................. 6 F409 Gasket, Small Circular Box ............ 15
M191 Intersection and Back Outlet Box...... 6 F410 Gasket, Large Circular Box ............ 15
M192 Tangent Through Box ...................... 6 F415 Gasket, All Adaptable Box sizes ..... 15
M193 Tangent Angle Box.......................... 6 R431 Saddle, Spacer Bar....................... 14
M194 Tangent Tee Box ............................ 6 F441 Saddle, Half.................................. 14
M195 Branch Two Way Box ...................... 6 R451 Saddle, Single .............................. 14
M196 Branch Three Way........................... 7 F461 Crampets ..................................... 14
M197 Twin Through Way Box .................... 7 M471 Reducers ..................................... 13
M211 Large Terminal Box......................... 7 M501 Loop, Male ................................... 11
M212 Large Through Box ......................... 7 M502 Hook, Male................................... 11
M213 Large Angle Box ............................. 7 M503 Loop, Female ............................... 11
M214 Large Tee Box................................ 7 M504 Hook, Female ............................... 11
M215 Large Intersection Box .................... 7 F505 Circular Locknuts, Milled Edge ....... 13
M216 Large Back Outlet Box .................... 7 F506 Copper Clip, Earthing .................... 12
M217 Large Terminal and Back Outlet Box. 7 R507 Locknut, Light, Steel ..................... 13
M218 Large Through and Back Outlet Box . 7 M508 Locknut, Heavy, Malleable Iron....... 13
M219 Large Angle and Back Outlet Box ..... 7 M527 Plug, Malleable Iron....................... 13
M220 Large Tee and Back Outlet Box........ 7 F531 Bush, Brass, Short Male ................ 13
M221 Large Intersection and F532 Bush, Brass, Long Male................. 13
Back Outlet Box .............................. 7 F534 Bush, Brass, Female ..................... 13
M222 Large Tangent Angle Box ................ 7
M223 Large Tangent Tee Box ................... 7
M231 Terminal Deep Box.......................... 8
M232 Through Deep Box .......................... 8
M233 Angle Deep Box .............................. 8
M234 Tee Deep Box................................. 8
M235 Intersection Deep Box ..................... 8
M241 Terminal Extension Box ....................8
M242 Through Extension Box.................... 8
M243 Angle Extension Box........................ 8
M244 Tee Extension Box .......................... 8
M245 Intersection Extension Box............... 8

29
HEALTH AND SAFETY AT WORK ETC, ACT 1974 BAR ON

STATEMENT TO PURCHASERS
AND PROSPECTIVE PURCHASERS

1. Section 6 of this Act provides that manufacturers, designers, 4. It is important that the products concerned should be
importers or suppliers of articles for use at work have a duty installed, commissioned and maintained by, or under the
to ensure, so far, as is reasonably practicable, that the supervision of, competent persons in accordance with good
article will be safe and without risk to health when properly engineering practice and:
used. An article is not regarded as being ‘properly used’ if it – I.E.E. Regulations for the Electrical Equipment of
is used without regard to any relevant information or advice Buildings.
relating to its use made available by the manufacturer, – Codes of Practice.
designer, importer or supplier. – Statutory Requirements.
– Any instructions specifically advised by the Company
2. Having regard to these provisions the following is given as a and, where appropriate, with particular reference to
guide to the information which is readily available to you, in information marked on the product.
order that the obligations of all concerned may be met as
fully as is reasonably practicable. This information relates to 5. In accordance with the provisions of the Act, you are
those products detailed in our Catalogue(s) or associated therefore requested to take such steps as are necessary to
literature. ensure that any appropriate information relevant to our
products is made available by you to anyone concerned.
3. Information on the design, construction and installation of our
products to ensure that so far as is reasonably practicable 6. C.O.S.H.H. REGULATIONS 1988
they are safe and without risk to health when properly used Due to the nature of BARTON Products being of ferrous or
may be found in: non ferrous material supplied in either self colour, painted
– Relevant British Standard Specifications and Codes of stove enamel or galvanised finishes, there are no substances
Practice. hazardous to health involved with the finished products within
– Regulations for Electrical Equipment of Buildings the meaning given to that phrase in the regulations.
(published by the Institution of Electrical Engineers).
– Catalogues and product leaflets of this Company. 7. All BARTON Products are manufactured in accordance with
– Or may be obtained by specific request to the the ENVIRONMENTAL PROTECTION ACT.
Company.
Our policy is one of continuous product improvement and hence
we reserve the right to revise designs and specifications without
prior notice.

31
 Terms and Conditions of Trading
1. INTERPRETATION
7. RISK AND PROPERTY
1.1 (In these conditions)
7.1 Risk of Damage to or loss of the Goods shall pass to the Buyer on the Delivery Date.
BUYER: means the person, firm or the company entering into the Contract to purchase the goods and/or Service from
the Seller. 7.2 The property in the Goods shall not pass to the Buyer until the Seller has received in cash or cleared funds payment in full of the
price of the Goods and all other goods sold or agreed to be sold by the Buyer under any other contract.
CONDITIONS: means the standard terms and conditions of sale set out in this document and (unless the context otherwise
requires) includes any special terms and conditions agreed in writing between the Buyer and the Seller. 7.3 Until such time properly in the Goods shall not pass to the Buyer, the Seller shall be entitled at any time to require the Buyer to
deliver up the Goods to the Seller and, If the Buyer fails to do so forthwith, to enter upon any premises of the Buyer or any third
CONTRACT: means the contract for the purchase and sale of Goods and/or Services. party where the Goods are stored and repossess the Goods and for the purpose the Buyer hereby authorize and license the Seller,
DELIVERY DATE: means the earlier of the time of actual delivery of the Goods or, if the Goods are to be collected by the Buyer its officers, employees and agents to enter upon any land or building upon which the Goods are situated to recover those goods,
or the Buyer wrongfully fails to take delivery of the Goods, the date that the Seller notifies the Buyer that the and the Buyer shall indemnify the Seller against all cost, damages, charges and expenses in such regard.
Goods are ready for delivery or, as the case maybe, the Seller tenders delivery of the Goods or, if the Buyer
wrongfully fails to allow the performance of the Services, the date that the Seller notifies the Buyer that it is in
a position to perform the Services. 8. WARRANTIES AND LIABILITIES
GOODS: means the goods (including any installment of the Goods or any parts for them) which the Seller is to supply in THE BUYER’S ATTENTION IS IN PARTICULAR DRAWN TO THE PROVISIONS OF THIS CLAUSE 8.
accordance with these Conditions. 8.1 The Seller warrants that the Goods will be free from defects in material and workmanship for a period of 3 months from the
SELLER: means LIBERTY BUILDING SOLUTIONS FZE. Delivery Date and that the Services will be performed with reasonable care and skill.
SERVICES: means the Services which the Seller is to supply in accordance with these Conditions. 8.2 The above warranties are given by the Seller subject to the following conditions:
TOOLING: includes patterns, tooling & dies. 8.2.1 The Seller shall be under no liability in respect of any failure or defect arising from any Tooling, drawing, design, or specification
supplied by the Buyer;
WRITING: Includes telex, cable, facsimile transmission, electronic mail and comparable means of communication.
8.2.2 The Seller shall be under no liability in respect of any defect or failure arising from fair wear and tear, willful damage, negligence,
abnormal working condition, failure to follow the Seller’s instructions (whether oral or in writing), misuse or alteration or repair of
2. BASIS OF THE CONTRACT the Goods without the Seller’s prior approval;
2.1 These Conditions shall govern the Contract to the exclusion of any other terms and conditions. 8.2.3 If the total price has not been paid by the due date, the Seller shall be under no liability until the total price has been paid.
8.2.4 The above warranties do not extend to parts, materials or equipment not manufactured by the Seller, in respect of which the Buyer
3. ORDERS AND SPECIFICATION shall only be entitled to the benefit or any such warranty or guarantee as it given by the manufacturer to the Seller;
3.1 The Buyer shall be responsible to the Seller for ensuring the accuracy of the terms of any order (including any applicable 8.2.5 The Seller shall under no liability in respect of any failure or defect is within reasonable commercial tolerances.
specification) and for giving the Seller any necessary information relating to the contract within a sufficient time to enable the Seller 8.3 Subject as expressly provided in these Conditions, all warranties, conditions and other terms implied by statute or law are excluded
to perform the Contract. Where the Goods are to be supplied to the Buyer’s specification, the Buyer warrants that the Goods are to the fullest extent permitted by law.
capable of production. 8.4 Any claim by the Buyer which is based on any defect in the quality or condition of the Goods, any failure to exercise reasonable
3.2 The quantity, quality and description of and any specification for the Goods and/or the description of the Services shall be those care and skill or any under or over-delivery of the Goods shall, whether or not delivery is refused by the Buyer, be notified to the
set out in the Seller’s quotation (if accepted by the Seller). Seller within 3 days from the Delivery Date or, where the defect or failure was not apparent on reasonable inspection, within a
3.3 The Seller reserves the right to make any changes in the specification of the Goods or Services which are required to conform reasonable time after delivery of the defect or failure and in any event within 7 days of discovery. If delivery is not refused, and
with any applicable safety or other statutory or legal requirements or, where the Goods or Services are to be supplied to the the Buyer does not notify the Seller, the Seller shall have no liability for such defect or failure, and the Buyer shall be bound to pay
Seller’s specification, which do not materially affect their quality or performance. the price as if the Contract has been performed in accordance with its terms.
3.4 No Contract maybe cancelled by the Buyer except with the agreement in writing of the Seller and on terms that the Buyer shall 8.5 Where any valid claim in respect of any of the Goods which is based on any defect in the quality or condition of the Goods or any
indemnify the Seller in full against all loss (including loss of profit), costs, damages, charges and expenses. failure to exercise reasonable care and skill is notified to the Seller in accordance with these Conditions , the Seller shall be entitled
to replace the Goods (or part in question) or to re-perform the Services free of charge or, at the Seller’s sole discretion, refund
3.5 The Buyer shall indemnify and keep indemnified the Seller against any claim or liability in respect of any infringement of intellectual to the Buyer the price of the Goods (or a proportionate part of the price) but the Seller shall have no further liability to the Buyer.
or industrial property rights resulting from compliance with the Buyer’s instructions express or implied.
8.6 The Seller shall not be liable to the Buyer be reason of any representation , or any implied warranty, condition or other term , or
3.6 Drawing, illustration and Specifications prepared by or on behalf of the Seller in connection with the Contract shall remain the any duty of law, or under the express terms of the contract, for any consequential loss or damage (whether for loss of profit,
property of the Seller and shall not be communicated to third parties without the Seller’s prior written consent. product recall or otherwise) which arise of or in connection with the supply of the Goods and/or the Services or their use or resale
3.7 The Seller’s reserves the right to undertake credit references and may suspend delivery of Goods or performance of the Contract by the Buyer and the entire liability of the Seller under or in connection with the Contract shall not exceed the price under the
or any other contract with the Buyer, if such references are unsatisfactory. Contract, except as expressly provided in these Conditions.
3.8 Each performance or delivery schedule submitted by the Buyer shall constitute an order capable of acceptance by the Seller. If 8.7 The Seller shall not be liable to the Buyer or to be deemed to be in breach of the Contract by reason any delay in performing, or
the Seller agrees that any such schedule shall not constitute an order in circumstances where it is reasonably necessary for the any failure to perform, any of the Seller’s obligation, if the delay or failure was due to any cause beyond the Seller’s reasonable
Seller to act in reliance upon such schedule so as to enable the Seller to perform the schedule in accordance with its terms if control.
such schedule becomes an order accepted by the Seller, the buyer shall indemnify and keep the Seller indemnified all, costs,
damages, charges and expenses arising from such reliance by the seller if such schedules does not become an order capable of
acceptance by the Seller. 9. INDEMNITY
THE BUYER’S ATTENTION IN PARTICULAR DRAWN TO THE PROVISIONS OF THE CLAUSE.
4. PRICE 9.1 The Buyer shall take or procure the taking of all such steps as may be necessary to ensure the safety of the Seller’s employees,
agents and contractors or any premises at which the Service is to be provided without limitation, notifying such representatives
4.1 The price shall be the Seller’s quoted price, or where no price has been quoted or a quoted price is no longer valid, the price of any relevant hazards.
listed in the Seller’s published price list current at the date of acceptance of the order. Where the Goods are supplied for export,
the Seller’s export price list shall apply in the absence of a price quoted by the Seller. All prices quoted are valid for 30 days or 9.2 The Buyer shall indemnify and keep indemnified the Seller, its officers, employees agents and sub-contractors against any loss or
until earlier acceptance by the Buyer, after which time they may be altered by the Seller without notice. damage to any property or injury or death of any person caused by any negligent act or omission or willful misconduct of the
Buyer, its employees agents or sub-contractors, including all and any costs and expenses relating thereto.
4.2 The Seller reserves the right to increase the price to reflect any increase in the cost to the Seller which is due to any factor beyond
the Seller’s control, any change in delivery or performance dates, quantifies or specifications which is requested by the Buyer, or
any delay caused by any instructions of the Buyer to give the Seller adequate information or instructions. 10. TOOLING
4.3 All prices are given by the Seller on an ex-works basis, unless otherwise confirmed in writing by the Seller. 10.1 Any Tooling supplied by the Buyer shall remain the property of the Buyer at the Buyer’s risk. The Buyer shall be responsible for
4.4 The price is exclusive of any applicable value added tax, which the Buyer shall be additionally liable to pay to the Seller. the repair and maintenance of such Tooling. The Seller shall not use such Tooling in connection with any contract with a third party
without the Buyer’s prior consent in Writing.
4.5 The costs of pallets and returnable containers will be charged to the Buyer in addition to the price but full credit will be given to
the Buyer provided they are returned undamaged to the Seller within 28 days of the date of delivery. 10.2 All tooling used, manufactured or procured in connection with contract and which is not supplied by the Buyer shall be the property
of the Seller.
10.3 All any intellectual and industrial property rights comprised in any Tooling shall vest in the party owning such Tooling.
5. TERMS OF PAYMENT
10.4 The Seller reserves the right to charge the Buyer for the cost of storage of the Buyer’s Tooling and to require the Buyer to
5.1 The Seller shall be entitled to invoice the Buyer for the price on or at any time after the Delivery Date. remove such Tooling from the Seller’s premises upon not less than 3 months notice in Writing.
5.2 The Buyer shall pay the price without any deduction or set-off (save as set out in this condition 5.2) on or before the last day of
the month following the Delivery Date and the Seller shall be entitled to recover the price, notwithstanding that delivery may not
have taken place and the property in the Goods has not passed to the Buyer and/or the Services have not been performed. The 11. INSOLVENCY OF BUYER
time of payment of the price shall be of the essence of the contract. 11.1 This clause applies if;
5.3 If the Buyer fails to make any payment on the due date then, without prejudice to any other right or remedy, the Seller shall be 11.1.1 The Buyer makes any voluntary arrangement with its creditors or become subject to an administration or similar order (for being
entitled to; an individual firm) become bankrupt or (being a company) goes into liquidation, otherwise than for the purpose of amalgamation
5.3.1 suspend all or any further deliveries to the Buyer or suspend the provision of all or any services made under that or any other or reconstruction; or
contract with the Buyer and in such event the Buyer shall not be released from its obligations to the Seller under that or any other 11.1.2 An encumbrancer take possession, or a receiver is appointed, of the Buyer’s undertaking or any of its property or assets; or
contract or cancel the contract or any other contract with the Buyer, and the Seller shall have the right to claim damages from 11.1.3 The Buyer ceases, or threatens to cease, to carry on business; or
the Buyer for breach of contract;
11.1.4 The Seller reasonably apprehends that any of the events mentioned above is about to occur in relation to the Buyer and notifies
5.3.2 appropriate any payment made by the Buyer to such part of the Contract or the Goods (or the Goods supplied under any other the Buyer accordingly.
contract between the Buyer and the Seller) as the Seller may think fit (notwithstanding any purported appropriation by the
Buyer);and 11.2 If this clause applies then, without prejudice to any other right or remedy available to the Seller, the Seller shall be entitled to cancel
the Contract or suspend performance and/or any further deliveries under the Contract without any liability to the Buyer, and if the
5.3.3 charge the Buyer interest (both before and after and judgment) on the amount unpaid, at the rate of 12% per annum accruing daily, Goods have been delivered and/or Services performed, but not paid to, the price shall become immediately due and payable.
until payment in full is made.
5.4 The Seller may without notice set off any sums from time to time owed to the Buyer in or towards the satisfaction of all and any
liabilities of the Buyer to the Seller whether or not under this Contract. 12. EXPORT TERMS
5.5 The Seller shall have a general lien over all goods and property of the buyer (whether worked on or not) in the possession of the 12.1 The Buyer shall be responsible for complying with any legislation and regulation governing the importation of the Goods into the
Seller for all unpaid debts due from the Buyer and the Seller reserves the right upon the expiration of fourteen days written notice country of destination and for the payment of any duties thereon.
to dispose of such good or property and to apply the proceeds of sale (net of costs of sale) towards the payment of such debts. 12.2 Unless otherwise agreed in Writing between the Buyer and the Seller, the Goods shall be delivered ex-works.
12.3 The Buyer shall be responsible for arranging for testing and inspection of the Goods at the Seller’s premises before shipment.
6. DELIVERY AND PERFORMANCE The Seller shall have no liability for any claim in respect of any defect which would be apparent on inspection and which is made
after shipment, or in respect of any damage during transit.
6.1 The Buyer shall be responsible for the unloading of Goods and where the Seller or its employees or agents carries out or assist
the Buyer in such unloading. The Buyer shall indemnify and keep indemnified the Seller against all liabilities including without 12.4 Payment of all amounts due to the Seller shall be made by irrevocable letter of credit opened by the Buyer in favor of the Seller
limitation all loss, costs, damages, charges and expenses from such unloading. and confirmed by the Seller’s Bank in the United Arab of Emirates, or, if the seller has agreed on or before acceptance of the
buyer’s order to waive the requirement, by acceptance by the Buyer and delivery to the Seller of a bill of exchange drawn on the
6.2 Any dates quoted for delivery of the Goods or performance of the Service are approximate only and the Seller shall not be liable Buyer payable 30 days after sight of the order of the Seller at such bank as may be specified on the bill of exchange.
for any delay howsoever caused. The Goods may be delivered and/or Services maybe performed by the Seller in advance of the
quoted delivery date upon giving reasonable notice to the buyer.
6.3 The Seller reserves the right to under or over-deliver the order quantity of any Goods by up to 10% more or less without any 13. GENERAL
adjustments in the price, and the quantity so delivered shall be deemed to be the quantity ordered. 13.1 The Buyer shall not be entitled to assign the whole or any part of the Contract without the prior written consent of the Seller.
6.4 Where the Goods are to be delivered or Services performed in installments, each delivery or performance shall constitute a 13.2 No waiver by the Seller of any breach of the Contract by the Buyer shall be considered as a waiver of any subsequent breach of
separate contract and failure by the Seller to deliver or perform any one or more of the installment in accordance with these the same or any other provision.
Conditions or any claim by the Buyer in respect of any one or more installments shall not entitled the Buyer to treat the Contract 13.3 If any provision of these Condition is held by any competent authority to be invalid or unenforceable in whole or in part the validity
as a whole as repudiated. of the other provisions of these Conditions and the remainder of the provision in question shall not be affected thereby unless
6.5 If the Seller fails to deliver the Goods (or any installment) or perform any Services (or any installment) for any reason other than such provisions goes to the root of the Contract.
any cause beyond the Seller reasonable control or the Buyer’s fault, and the Seller is accordingly liable to the Buyer, the Seller’s 13.4 The conditions shall constitute the entire agreement in relation to the subject matter and no modification or waiver thereof shall
liability shall be limited to the excess, if any, of the reasonable costs to the buyer (in the cheapest available market) of similar goods be valid unless made in Writing expressly for the purpose and signed by an authorized officer of the Seller and of the Buyer
and/or services to replace those not delivered over the price of the Goods and/or Services. provided that nothing in these conditions shall exclude or limit liability for fraud.
6.6 If the Buyer fails to take delivery of the Goods or to allow performance of the Services or fails to give the Seller adequate delivery 13.5 The contract shall be governed by the laws applicable in the Emirates of Dubai and the Buyer agrees to submit the non-exclusive
or performance instructions at the time stated for delivery or performance (otherwise than by reason of any cause beyond the jurisdiction of the Dubai courts.
Buyer’s reasonable control or by reason of the Sellers fault) then, without prejudice to any other right or remedy available, the
Seller may;
6.6.1 store the Goods until actual delivery and charge the Buyer for the reasonable cost of storage, including insurance;
6.6.2 after the expiration of 3 months from the Delivery Date to dispose of the Goods in such manner as the Seller may determine and;
6.6.3 suspend any further delivery of Goods and/or goods and/or performance of the Services and/or services under the Contract or
any other contract.
6.7 The Services shall be performed at the Seller’s premises.